Error in solaris 10 installing 6.3 DS

hi
i get an error when starting cacao
Error: Exception thrown by the agent : java.net.MalformedURLException: Local host name unknown: java.net.UnknownHostException: unknown: unknown
i see tomcat running good
when i ask for dscc i get above error ,seems java error think so, but i install java before as of installing solaris 10 OS,is there any solution for this issue.

update your /etc/hosts file with your servers ip address.

Similar Messages

  • Error on new Solaris install!

    Error: failed
    /tmp/install.dir.6427/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so,
    because ld.so.1: /tmp/install.dir.6427/Solaris/resource/jre/jre/bin/
    ../bin/sparc/native_threads/java: fatal: libCrun.so.1: open failed: No such
    file or directory
    what now?
    Do I need to install the latest version of Java...1.3?

    I am having the same problem on Solaris 2.6 when I attempt to upgrade weblogic 5 to 6.0sp1. Does anyone has a resolution to this? I even installed jdk1.3 without any success../weblogic600sp1_sol.binPreparing to install...Error: failed /tmp/install.dir.7566/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so, because ld.so.1: /tmp/install.dir.7566/Solaris/resource/jre/jre/bin/../bin/sparc/native_threads/java: fatal: libCrun.so.1: open failed: No such file or directoryExit 6

  • Error During Solaris 8 Installation

    Hi
    I am getting the following error message while installing solaris 8 on my intel based computer.
    Error : Could not mount filesystems .
    Error : could not opern /a/etc/vfstab .
    and the installation halts and the prompt comes up.
    The packages are partially installed.
    Pls help me out in this.
    SG Krishnan

    At this point in the install there are so many things that could lead
    to these errors. I would suggest going right to Sun's Install support
    by calling 800 USA-4SUN and following the prompts to warranty
    support. There you can verify your hardware compatibility and any
    other issue you might have.
    Hope this helps.

  • Error occur when installing iPlanet App server 6.0 SP2

    Dear All,
    I have problems in installing the iPlanet App server 6.0 SP2 in Solaris.
    I choose typical installation and select default settings.
    - install iplanet server
    - typical install
    - install ALL components
    However, the following errors occur during the installation:
    sh: ./pre_nas_preinst: not found
    ERROR. Failure installing iPlanet Application Server Web Connector Component. Do you want to continue [n]?
    ERROR. Failure installing iPlanet Application Server Core Server Component. Do you want to continue [n]?
    ERROR. ...........
    What's the problem with it? Could anyone help....?
    Thank youin advance.
    Thx & Regards,
    Yvonne

    I would recommend to use the latest version of application server which is iAS6.5sp1MU2. Try this out and see if you run into any problems. Also please check the release notes available at docs.sun.com to check the compatibility.

  • Error messages while installing x86 on PIII

    How can I over come that error messages while installing x86 on PIII GA-60XT Socket 370 Processor Motherboard .
    Strange problem . I did not face that problem with previous versions
    of Solaris 10. I used Sun's Download Manager with the same results. I
    used Nero to burn the DVD file : sol-10-u5-ga-x86-dvd.iso.
    Those are the steps I did . Please tell me any errors about it :
    ---Start of steps----------------------------------------
    I entered in the GRUB append -kd instead of cdrom and then reboot :
    Welcom to kmdb
    [0] > cmi_no_init/W1
    cmi_no_init 0 = 0x1
    Error : unable to configrte Network interface.
    Exiting to shell.
    #exit
    nfs mount : nfs file system , use [host:]path
    then I navigate with the installation program :
    Keyboard layout
    language
    hostname
    password
    Error : the disk you inserted is not a Solaris OS CD/DVD.
    F2
    There were problems loading the media from /cdrom
    -----End of steps-----------------------------------
    Thanks

    Are you using a computer Administrator account?

  • Errors during Solaris 11/11 to 11.1 upgrade

    Hi,
    I originally resurrected a thread from 2012 and attempted to hijack it away for my own question. However, a kind forum moderator split it away to let it stand on its own since I wasn't trying to help that original post but was only concerned about my own system.
    Here's my post:
    #Am also trying to upgrade our local AI 11/11 server to 11.1 but finding similar errors. First I've updated our local 11/11 repo with SRU 13.4 and then updated the AI server's BE from this successfully
    root@sol11:~# beadm list
    BE                   Active Mountpoint Space  Policy Created         
    sol-11-1111-sru13_04 NR     /          39.91G static 2013-01-21 11:18
    solaris              -      -          7.50M  static 2011-12-09 09:15
    root@sol11:~# pkg list entire
    NAME (PUBLISHER)                                  VERSION                    IFO
    entire (solaris)                                  0.5.11-0.175.0.13.0.4.0    i--#Then trying to follow http://www.oracle.com/technetwork/articles/servers-storage-admin/howto-update-11dot1-ips-1866781.html
    root@sol11:~# pkg update --accept
    WARNING: pkg(5) appears to be out of date, and should be updated before
    running update.  Please update pkg(5) by executing 'pkg install
    pkg:/package/pkg' as a privileged user and then retry the update.
    root@sol11:~# pkg update pkg:/package/pkg
                Packages to remove:  1  
           Create boot environment: No
    Create backup boot environment: No
    PHASE                                        ACTIONS
    Removal Phase                                  13/13
    PHASE                                          ITEMS
    Package State Update Phase                       1/1
    Package Cache Update Phase                       1/1
    Image State Update Phase                         2/2 # DWL entire 11.1 ISO file from 11.jan 2013 and copied repo onto AI server and switched publisher to this repo:
    root@sol11:~# pkg publisher
    PUBLISHER                             TYPE     STATUS   URI
    local-solaris                                          
    solaris                               origin   online   file:///export/sol11.1_ipsrepo/
    root@sol11:~# pkg update --be-name s11.1ga --accept
    Creating Plan \                     
    pkg update: No solution was found to satisfy constraints
    Plan Creation: Package solver has not found a solution to update to latest available versions.
    This may indicate an overly constrained set of packages are installed.
    latest incorporations:
      pkg://solaris/consolidation/admin/[email protected],5.11-0.175.1.0.0.5.0:20111212T232623Z
      pkg://solaris/consolidation/l10n/[email protected],5.11-0.175.1.0.0.23.1134:20120820T154803Z
      pkg://solaris/consolidation/userland/[email protected],5.11-0.175.1.0.0.24.0:20120904T170613Z
      pkg://solaris/[email protected],5.11-0.175.1.0.0.24.2:20120919T190135Z
      pkg://solaris/consolidation/install/[email protected],5.11-0.175.1.0.0.24.1736:20120912T193249Z
      pkg://solaris/consolidation/sunpro/[email protected],5.11-0.175.1.0.0.19.0:20120625T151735Z
      pkg://solaris/consolidation/gfx/[email protected],5.11-0.175.1.0.0.5.0:20111212T232623Z
      pkg://solaris/consolidation/sfw/[email protected],5.11-0.175.1.0.0.5.0:20111212T232623Z
      pkg://solaris/consolidation/ips/[email protected],5.11-0.175.1.0.0.24.0:20120904T180327Z
      pkg://solaris/consolidation/ldoms/[email protected],5.11-0.175.1.0.0.21.1:20120723T182124Z
      pkg://solaris/consolidation/vpanels/[email protected],5.11-0.175.1.0.0.17.0:20120529T220223Z
      pkg://solaris/consolidation/dbtg/[email protected],5.11-0.175.1.0.0.15.0:20120501T214422Z
      pkg://solaris/consolidation/X/[email protected],5.11-0.175.1.0.0.24.1317:20120904T175757Z
      pkg://solaris/consolidation/man/[email protected],5.11-0.175.1.0.0.21.0:20120723T163455Z
      pkg://solaris/consolidation/desktop/[email protected],5.11-0.175.1.0.0.24.2:20120919T183843Z
      pkg://solaris/consolidation/nspg/[email protected],5.11-0.175.1.0.0.5.0:20111212T232623Z
      pkg://solaris/consolidation/sic_team/[email protected],5.11-0.175.1.0.0.5.0:20111212T230120Z
      pkg://solaris/consolidation/SunVTS/[email protected],5.11-0.175.1.0.0.14.0:20120416T200729Z
      pkg://solaris/consolidation/solaris_re/[email protected],5.11-0.175.1.0.0.24.3:20120919T185316Z
      pkg://solaris/consolidation/smcc/[email protected],5.11-0.175.1.0.0.5.0:20111212T232623Z
      pkg://solaris/consolidation/cns/[email protected],5.11-0.175.1.0.0.23.0:20120820T162238Z
      pkg://solaris/consolidation/cacao/[email protected],5.11-0.175.1.0.0.11.0:20120305T152551Z
      pkg://solaris/consolidation/osnet/[email protected],5.11-0.175.1.0.0.24.2:20120919T184141Z
      pkg://solaris/consolidation/desktop/[email protected],5.11-0.175.1.0.0.22.0:20120806T171142Z
    The following indicates why the system cannot update to the latest version:
      No suitable version of required package pkg://solaris/consolidation/userland/[email protected],5.11-0.175.1.0.0.24.0:20120904T170613Z found:
        Reject:  pkg://solaris/consolidation/userland/[email protected],5.11-0.175.1.0.0.24.0:20120904T170613Z
        Reason:  A version for 'incorporate' dependency on pkg:/network/dns/[email protected],5.11-0.175.1.0.0.24.0 cannot be found*# Why and how to resolve this issue?*
    *#TIA*
    #Just in case you ask:
    root@sol11:~# pkg info entire
    Name: entire
    Summary: entire incorporation including Support Repository Update (Oracle Solaris 11 11/11 SRU 13.4).
    Description: This package constrains system package versions to the same
    build. WARNING: Proper system update and correct package
    selection depend on the presence of this incorporation.
    Removing this package will result in an unsupported system. For
    more information see https://support.oracle.com/CSP/main/article
    ?cmd=show&type=NOT&doctype=REFERENCE&id=1372094.1.
    Category: Meta Packages/Incorporations
    State: Installed
    Publisher: solaris
    Version: 0.5.11 (Oracle Solaris 11 SRU 13.4)
    Build Release: 5.11
    Branch: 0.175.0.13.0.4.0
    Packaging Date: November 6, 2012 07:46:23 PM
    Size: 5.45 kB
    FMRI: pkg://solaris/[email protected],5.11-0.175.0.13.0.4.0:20121106T194623Z
    root@sol11:~# pkg info consolidation/osnet/osnet-incorporation
    Name: consolidation/osnet/osnet-incorporation
    Summary: OS/Net consolidation incorporation
    Description: This incorporation constrains packages from the OS/Net
    consolidation.
    Category: Meta Packages/Incorporations
    State: Installed
    Publisher: solaris
    Version: 0.5.11
    Build Release: 5.11
    Branch: 0.175.0.13.0.4.1
    Packaging Date: November 6, 2012 07:31:22 PM
    Size: 17.15 kB
    FMRI: pkg://solaris/consolidation/osnet/[email protected],5.11-0.175.0.13.0.4.1:20121106T193122Z

    Yes also indicated previously, only I found that I also needed to remove two more packages before upgrading successfully, see below.
    Thanks for your reply!
    Removing installadm pkg along made it possible to upgrade from 11/11-SRU13-4 to 11.1...
    root@sol11:~# pkg uninstall pkg:/service/network/dhcp/isc-dhcp pkg://solaris/install/installadm
    Packages to remove: 2
    Create boot environment: No
    Create backup boot environment: No
    Services to change: 3
    PHASE ACTIONS
    Removal Phase 166/166
    PHASE ITEMS
    Package State Update Phase 2/2
    Package Cache Update Phase 2/2
    Image State Update Phase 2/2
    The following unexpected or editable files and directories were
    salvaged while executing the requested package operation; they
    have been moved to the displayed location in the image:
    var/db/isc-dhcp/dhcpd4.leases~ -> /var/pkg/lost+found/var/db/isc-dhcp/dhcpd4.leases~-20130122T143604Z
    var/db/isc-dhcp/dhcpd4.leases -> /var/pkg/lost+found/var/db/isc-dhcp/dhcpd4.leases-20130122T143604Z
    root@sol11:~# pkg update be-name s11.1ga accept
    Package: pkg://solaris/consolidation/osnet/[email protected],5.11-0.175.1.0.0.24.2:20120919T184141Z
    License: usr/src/pkg/license_files/lic_OTN
    Packages to remove: 10
    Packages to install: 40
    Packages to update: 415
    Mediators to change: 2
    Create boot environment: Yes
    Create backup boot environment: No
    DOWNLOAD PKGS FILES XFER (MB)
    Completed 465/465 24964/24964 445.9/445.9
    PHASE ACTIONS
    Removal Phase 9898/9898
    Install Phase 18235/18235
    Update Phase 14665/14665
    PHASE ITEMS
    Package State Update Phase 878/878
    Package Cache Update Phase 424/424
    Image State Update Phase 2/2
    A clone of sol-11-1111-sru13_04 exists and has been updated and activated.
    On the next boot the Boot Environment s11.1ga will be
    mounted on '/'. Reboot when ready to switch to this updated BE.
    NOTE: Please review release notes posted at:
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=REFERENCE&id=1372094.1
    # reinstall earlier removed pkg
    root@sol11:~# pkg install pkg:/service/network/dhcp/isc-dhcp pkg://solaris/install/installadm pkg://solaris/network/dns/bind pkg://solaris/service/network/dns/bind
    Packages to install: 4
    Create boot environment: No
    Create backup boot environment: No
    Services to change: 3
    DOWNLOAD PKGS FILES XFER (MB) SPEED
    Completed 4/4 128/128 4.5/4.5 0B/s
    PHASE ITEMS
    Installing new actions 286/286
    Updating package state database Done
    Updating image state Done
    Creating fast lookup database Done
    root@sol11:~# pkg list entire
    NAME (PUBLISHER) VERSION IFO
    entire (solaris) 0.5.11-0.175.1.0.0.24.2 i--

  • Error Message when installing Adobe AIR

    Hi, I am running XP and previously had Adobe AIR installed ok.  I recently removed the install of Adobe AIR and have tried to reload it but get the below error message:
    "An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
    I have tried safe mode, registry cleaners, turning of the firewall, pop ups and anti-virus, to installing as an Administrator without luck and get exactly the same error message. I notice I am not alone after searching Google but haven’t found anything that works.
    I would really appreciate some guidance on what do next or from someone that has experienced the same issues.
    Many Thanks

    Hi Chris,
    Thanks for responding but I decided to rebuild the machine so its all resolved with a clean XP build.
    Thanks, Mark

  • Error message when installing Flash Player : List of actions not found

    I get an error message when trying to install Flash Player.
    I use Windows 64 bit with Internet Explorer 64x.
    I'm able to download, the installation starts but it stops before completing.
    I get this error message (loosely transalated) :
    Installation encountered errors
    List of actions not found
    How can I fix this ?
    Thank you
    Annie

    I solved my problem by installing the Flash Player from home.
    The network security at work prevented me from completing installation.
    Thanks for your help.
    Annie
    2012/9/26 Pat Willener <[email protected]>
       Re: Error message when installing Flash Player : List of actions not
    found  created by Pat Willener <http://forums.adobe.com/people/pwillener>in
    Installing Flash Player - View the full discussion<http://forums.adobe.com/message/4728064#4728064

  • Error message when installing quicktime/itunes

    PLease help! I continue to get this error message when trying to install quicktime HKEY_LOCAL-MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Quicktim e.
    What should I do? In lamens terms please, not very computer literate.

    an error message appears saying that a program required for the installation is missing
    In the course of your troubleshooting to date, have you tried the following user tip with that one?
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Error message when installing, modifying or repairing Adobe Reader

    Error  1406. Could not write value Installed to key  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\IMAIL.
    Verify that you have sufficient access to that key or contact you support personnel.
    Error  1406. Could not write value Installed to key  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\MAPI.
    Verify that you have sufficient access to that key or contact you support personnel.
    Error  1406. Could not write value Installed to key  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\MSFS.
    Verify that you have sufficient access to that key or contact you support personnel.
    Error  1402. Could not open key:  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\IMAIL. System error 1009.
    Verify that you have sufficient access to that key, or contact your support personnel.
    Error  1402. Could not open key:  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\MAPI. System error 1009.
    Verify that you have sufficient access to that key, or contact your support personnel.
    Error  1402. Could not open key:  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\MSFS. System error 1009.
    Verify that you have sufficient access to that key, or contact your support personnel.
    Error 1402. Could not open key: <Keyname>. System error 1009.
    Verify that you have sufficient access to that key, or contact your support personnel.
    Error 1406. Could not write value <Valuename> to key <Keyname>.
    Verify that you have sufficient access to that key or contact you support personnel.
    Please see: Error message when installing, modifying or repairing Adobe Reader

    Thank You phoney01..  this did indeed work perfectly for me as well!

  • I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

    Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

    check compatibility first, http://roaringapps.com/apps:table

  • Error message when installing photoshop CC

    Hi
    Hope someone can help. i've had a hard disk failure and had to reinstall all the Adobe CC components to a new drive on this PC. However, although some of them have installed and updated, Photoshop CC has not and is presenting the following error:-
    Exit Code: 6 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s)    ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------  ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546  ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Jude\AppData\Local\Temp\{2765BBA6-C262-45E9-9CF5-43EAA5891CB0}\Photoshop_15_LS20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com  -------------------------------------------------------------------------------------
    What am I doing wrong? Anything i can do to remedy this?
    Thanks in advance
    Jude

    Errors "Exit Code: 6," "Exit Code: 7"
    Mylenium

  • Prerequisiteinstaller.exe error - unable to install Application Server Role, Web Server (IIS) Role

    Windows Server 2012 R2 running on Hyper-V VM.  File services, App server & IIS roles installed
    SQL Server 2012 installed
    Tried:
    kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
    kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
    One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
    One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
    There are some errors in the log file,  I only included the portions where the errors are listed.  The initial lines are at the top of the log file, then I skipped to the section where the other errors were.  I can include the whole log if
    it becomes necessary.
    9:47:11 Processor architecture is (9)
    9:47:11 Reading the following string value/name...
    9:47:11 Common Startup
    9:47:11 from the following registry location...
    9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
    9:47:11 The value is...
    9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    9:47:11 Trying to remove the startup task if there is any.
    9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
    9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
    9:47:11 Locating the following command line arguments file:
    9:47:11 E:\PrerequisiteInstaller.Arguments.txt
    9:47:11 Error: This file does not exist
    9:47:11 Details of the current operating system:
    9:47:11 Check whether the following prerequisite is installed:
    9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
    9:47:11 Reading the following DWORD value/name...
    9:47:11 IsInstalled
    9:47:11 from the following registry location...
    9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
    9:47:17 Beginning download/installation
    9:47:17 Created thread for installer
    9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
    9:47:17 Error: Unable to install (2)
    9:47:17 Error: [In HRESULT format] (-2147024894)
    9:47:17 Last return code (2)
    9:47:17 Reading the following DWORD value/name...
    9:47:17 Flags
    9:47:17 from the following registry location...
    9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
    9:47:17 Reading the following string value/name...
    9:47:17 PendingFileRenameOperations
    9:47:17 from the following registry location...
    9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
    9:47:17 Reading the following registry location...
    9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
    9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
    9:47:17 Last return code (2)
    9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
    9:47:17 Cannot retry
    I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
    The 2nd set of errors seems more serious.  I don't see ServerManagerCmd.exe on my PC that's listed in the error
    I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
    Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer.  Any help is appreciated.  Do these problems exist using Sever 2012 Standard?  I will try that, but would
    like to resolve the issue here with R2.
    Thanks.
    Best Regards,
    Alan

    ServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller.  Are you trying to install SharePoint 2010?
    Running this page through Google Translate should give you an clearer idea on getting this installed.
    http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • TF255424: An error occurred while installing SharePoint Products. (SharePoint 2012)

    I want to install both SQL Server and Team Foundation Server on the same machine. Operating system of my server machine is Microsoft Windows Server 2008 R2 Service Pack 1. I first install Microsoft SQL Sever 2012 Enterprise edition without any error. After
    that i tried to install Microsoft Team Foundation Server 2012. Team Foundation Server configuration got complete. Microsoft SharePoint Foundation 2010 installed successfully but while configuring SharePoint extension i am getting the following error.
    "TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010."
    Please help.
    [Info   @12:19:36.259] 
    [Info   @12:19:36.259] +-+-+-+-+-| Environment |+-+-+-+-+-
    [Info   @12:19:36.260] Environment: FullEnvironment
    Setup: 
    InstallPath: C:\Program Files\Microsoft Team Foundation Server 11.0\
    IsTfsExpress: False
    ToolsPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
    ApplicationTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier
    BuildTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
    ProxyPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Version Control Proxy
    SetupUser: ETS-WEBAPP\tfsadmin
    WebServicePath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier\Web Services
    LicenseEdition: PID_RANGE_VL
    SystemTfsTemp: C:\Windows\Temp\TFSTemp
    SharePointInstallTemp: C:\Windows\Temp\TFSTemp\WSSInstall
    InstalledLanguages: System.Collections.Generic.List`1[System.Int32]
    InstalledLanguagesString: 1033;
    OS: 
    MachineName: ETS-WEBAPP
    HostName: ETS-WEBAPP
    IsClientOS: False
    IsServerOS: True
    IsDomainController: False
    IsMachineInWorkgroup: False
    IsMachineInDomain: True
    IsHomeEdition: False
    IsUnsupportedEdition: False
    Version: Server2008R2
    MajorVersion: 6
    MinorVersion: 1
    ProcessorCount: 4
    ServicePackMajor: 1
    ServicePackMinor: 0
    IsOSPostTfsRelease: False
    VisibleMemoryMB: 12287
    AdjustedMemoryGB: 12
    Iis: 
    IsInstalled: True
    PreviouslyFailedConfig: False
    RequiredIisFeaturesInstalled: True
    OS: 
    MachineName: ETS-WEBAPP
    HostName: ETS-WEBAPP
    IsClientOS: False
    IsServerOS: True
    IsDomainController: False
    IsMachineInWorkgroup: False
    IsMachineInDomain: True
    IsHomeEdition: False
    IsUnsupportedEdition: False
    Version: Server2008R2
    MajorVersion: 6
    MinorVersion: 1
    ProcessorCount: 4
    ServicePackMajor: 1
    ServicePackMinor: 0
    IsOSPostTfsRelease: False
    VisibleMemoryMB: 12287
    AdjustedMemoryGB: 12
    Sql: 
    SqlInstance 0: 
    Name: MSSQLSERVER
    FullName: ETS-WEBAPP
    Edition: Enterprise Edition
    Version: 11.0.2100.60
    IsWow64: False
    LCID: 1033
    IsExpressEdition: False
    IsFullEdition: True
    IsSupported: True
    IsSharePointSupported: False
    IsUpgradable: False
    WindowsServiceName: MSSQLSERVER
    SharePoint: 
    IsInstalled: True
    IsProvisioned: False
    IsAdminDbConfigured: False
    IsAdminSiteConfigured: False
    IsRunningSiteOnWebAppPort: False
    Version: 14.0.6029.1000
    WssAdminUrl: http://ets-webapp:17012/
    WssSiteUrl: http://ets-webapp/sites
    ReportingServices: 
    IsInstalled: True
    DefaultInstance: 
    InstanceIdentifier: ETS-WEBAPP
    HostName: ETS-WEBAPP
    InstanceName: MSSQLSERVER
    ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
    IsConfigured: True
    ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
    ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
    Instances[0]: 
    InstanceIdentifier: ETS-WEBAPP
    HostName: ETS-WEBAPP
    InstanceName: MSSQLSERVER
    ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
    IsConfigured: True
    ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
    ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
    PowerTools: 
    IsBackupToolConfigured: False
    [Info   @12:19:36.260] 
    [Info   @12:19:36.260] +-+-+-+-+-| Configuration Plan |+-+-+-+-+-
    [Info   @12:19:36.260] - ContainerTask (ContainerNode) : root
    - ConditionalTask (ConditionalNode) : Provisioning SharePoint
    - ContainerTask (ProgressNode) : Configure SharePoint
    - ConfigureSharepointProvision (ConfigureNode, 208) : Configuring the SharePoint Products
    SqlInstance = ETS-WEBAPP
    AdminSiteAccountName = Domain\tfsuser
    PasswordSupplied = *****
    SiteUrl = http://ets-webapp/
    AdminPort = 17012
    TfsServiceAccount = Domain\tfsuser
    - ContainerTask (ProgressNode) : Extending SharePoint
    - ConfigureSharepointUploadData (ConfigureNode, 209) : Uploading solutions and templates ...
    - ConfigureResetSPTimer (ConfigureNode, 214) : Resetting Sharepoint Timer Service ...
    - ConfigureIisReset (ConfigureNode, 801) : Resetting IIS ...
    - ConfigureMarkFeature (ConfigureNode, 140) : Marking feature configured status
    FeatureType = SharePointExtensions
    IsConfigured = True
    - ConfigureWssHealthCheck (ConfigureNode, 210) : Check if sharepoint is responsive
    SiteUrl = http://ets-webapp/
    - ConditionalTask (ConditionalNode) : SharepointEntries
    - ContainerTask (ProgressNode) : Configuring Services
    - ConfigureAddSharePointEntries (ConfigureNode, 207) : Configuring SharePoint application entries
    SharepointRootUri = http://ets-webapp
    SharepointAdminUri = http://ets-webapp:17012/
    DefaultSharePointPath = sites
    ApplicationTierUri = http://ets-webapp:8080/tfs
    ApplicationTierServiceAccount = NT AUTHORITY\NETWORK SERVICE
    - ConfigureAddAccountToLocalWss (ConfigureNode, 800) : Add account to WSS farm admin group
    Account = NT AUTHORITY\NETWORK SERVICE
    AdminUrl = http://ets-webapp:17012/
    UseRetainedSettings = False
    [Info   @12:19:36.260] 
    [Info   @12:19:36.260] +-+-+-+-+-| Running root: root |+-+-+-+-+-
    [Info   @12:19:36.260] 
    [Info   @12:19:36.260] +-+-+-+-+-| root |+-+-+-+-+-
    [Info   @12:19:36.260] Starting Node: CONTAINER
    [Info   @12:19:36.261] NodePath : Container
    [Info   @12:19:36.261] Node returned: Ignore
    [Info   @12:19:36.261] Completed root: Ignore
    [Info   @12:19:36.261] -----------------------------------------------------
    [Info   @12:19:36.261] 
    [Info   @12:19:36.261] +-+-+-+-+-| Running Provisioning SharePoint: Provisioning SharePoint |+-+-+-+-+-
    [Info   @12:19:36.261] 
    [Info   @12:19:36.261] +-+-+-+-+-| Provisioning SharePoint |+-+-+-+-+-
    [Info   @12:19:36.261] Starting Node: CONDITION
    [Info   @12:19:36.261] NodePath : Container/Conditional
    [Info   @12:19:36.261] Node returned: Ignore
    [Info   @12:19:36.261] Completed Provisioning SharePoint: Ignore
    [Info   @12:19:36.261] -----------------------------------------------------
    [Info   @12:19:36.262] 
    [Info   @12:19:36.262] +-+-+-+-+-| Running Configure SharePoint: Configure SharePoint |+-+-+-+-+-
    [Info   @12:19:36.262] 
    [Info   @12:19:36.262] +-+-+-+-+-| Configure SharePoint |+-+-+-+-+-
    [Info   @12:19:36.262] Starting Node: CONTAINER
    [Info   @12:19:36.262] NodePath : Container/Conditional/Progress
    [Info   @12:19:36.262] Node returned: Ignore
    [Info   @12:19:36.262] Completed Configure SharePoint: Ignore
    [Info   @12:19:36.262] -----------------------------------------------------
    [Info   @12:19:36.262] 
    [Info   @12:19:36.262] +-+-+-+-+-| Running ConfigSPProvision: Configuring the SharePoint Products |+-+-+-+-+-
    [Info   @12:19:36.263] 
    [Info   @12:19:36.263] +-+-+-+-+-| Configuring the SharePoint Products |+-+-+-+-+-
    [Info   @12:19:36.263] Starting Node: CSPPROVISION
    [Info   @12:19:36.263] NodePath : Container/Conditional/Progress/CSPPROVISION
    [Info   @12:19:36.263] 
    [Info   @12:19:36.263] +-+-+-+-+-| SharepointProvision::ConfigureDatabase |+-+-+-+-+-
    [Info   @12:19:36.263] Configuring the SharePoint Products database ...
    [Info   @12:19:36.263] SharePoint Products::ConfigureDatabase
    [Info   @12:19:36.263] GrantLogOnAsAService is called. User name: tfsuser [Info   @12:19:36.269] Checking if Authenticated Users group is a member of Users group.
    [Info   @12:19:36.272] sid = S-1-5-4
    [Info   @12:19:36.272] sid = S-1-5-11
    [Info   @12:19:36.272] sid = S-1-5-21-1481031050-1694664162-2121907377-513
    [Info   @12:19:36.272] sid = S-1-5-21-1529747324-2324938602-2105273467-1015
    [Info   @12:19:36.272] Authenticated Users group is a member of Users group.
    [Info   @12:19:36.300] C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe
    [Info   @12:19:36.300] -o setconfigdb
    [Info   @12:19:36.300] -databaseserver ETS-WEBAPP
    [Info   @12:19:36.300] -farmuser domain\tfsuser
    [Info   @12:19:36.300] -farmpassword ********
    [Info   @12:19:36.300] Process starting: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword ****************
    [Info   @12:20:04.869] Process finished: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword **************** exitCode=-1
    in 28566 ms
    [Info   @12:20:04.869] 
    [Info   @12:20:04.869] WARNING: SharePoint no longer customizes Integrated Authentication security settings. This Web application may be using Kerberos, which can require manual configuration. See "http://support.microsoft.com/?id=832769" for
    more information.
    [Info   @12:20:04.869] 
    [Error  @12:20:04.869] An error occurred while getting information about the user tfsuser at server telenor.com.pk: Access is denied
    [Error  @12:20:04.869] 
    [Info   @12:20:04.869] ReturnCode=-1
    [Info   @12:20:04.874] Node returned: Error
    [Error  @12:20:04.874] TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010. 
    [Info   @12:20:04.874] Completed ConfigSPProvision: Error
    [Info   @12:20:04.874] -----------------------------------------------------
    [Info   @12:20:04.880] Execution results:
    [Info   @12:20:04.880] Overall result: Failure
    [Info   @12:20:04.880] Nodes completed: 1
    [Info   @12:20:04.880] Nodes succeeded: 0
    [Info   @12:20:04.880] Nodes skipped: 0
    [Info   @12:20:04.880] Nodes with errors: 1
    [Info   @12:20:04.880] Nodes with warnings: 0
    [Info   @12:20:04.880] Number of error messages: 1
    [Info   @12:20:04.880] Number of warning messages: 0
    [Info   @12:20:04.880] Number of info messages: 0
    [Error  @12:20:04.881] Activity failed.
    [Info   @12:20:04.881] Configuration failed. Unconfiguring.
    [Info   @12:20:04.885] Setting the IsConfigured flag for feature SharePointExtensions to False.
    awias

    looks like here is the your problem "An error occurred while getting information about the user moss.service
    at server telenor.com.pk: Access is denied"
    try to add the user into the managed account via powershell. the user you trying to configure it.
    or change the user to some body else here is culprit account "telenorpk\moss.service"
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • HOW TO SOLVE THE R6034 ERROR IN ITUNES INSTALATION

    I need toknow how to solve the R6034 error in itunes instalation becouse y can´t buk up muy phone

    How to solve this ?
    #import <UIKit/UIKit.h>
    int main(int argc, char *argv[]) {
        NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
       -> int retVal = UIApplicationMain(argc, argv, nil, nil);
        [pool release];
        return retVal;

  • Hi, I am getting an error message while installing iTunes store app on my windows 7 laptop stating 'There is a problem with this windoes installer package. A program required for this install to complete could not be run. Contact your package  vendor'

    Plz assist

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Maybe you are looking for

  • Validations in Oracle Forms 6i

    Hi, Can anybody please let me know how do we use phone and email validators in Oracle Forms 6i for textitem. and what is the format for phone and email and how do we create.

  • My mac mini will not display internet properly on my Sony 55" hdtv!

    I have a older mac-mini that when on the internet overlaps text and info.  It does not matter what resolution you use, what size or zoom your on.  I even took it in to apple recently and had them install new software, Snow leopard 10.6.  I bought new

  • Problem connecting Nokia C3 to home wireless route...

    Good day, Nokia! I recently bought a Nokia C3-00 WiFi phone but I can't seem to browse my home wireless connection with it. The phone can detect and connect with the wireless network successfully but when I open my mobile browser, it can't load websi

  • New Bios for K7T266 Pro2-RU

    Hi All, Are there any new bios' for the K7T266 PRO2-RU (i.e., above 3.7), that will support the AMD 2200+, 2400+ Processors once the Modification is done? Thanks. Craig

  • Adding GSBER in RFUMSV00 standard prg

    Hi to All, We are trying to change the Standard Program RFUMSV00 to add Businnes Area in the output. Actual User Requirement is, they want Business Area in selection Screen and in the dispalying in the output too. It is displaying in the output but i