Error in submission because of debug assemblies (provided by Microsoft)

The binary Microsoft.Data.Services.Client.WP80.dll is built in debug mode.
The binary SharpGIS.GZipWebClient.dll is built in debug mode.
I get these two errors when submitting an update to one of my apps. The WP80 dll is a Microsoft assembly. How can I control that?
The SharpGIS is not debug, but appears to have not been built as an optimized assembly (seems the store is checking for optimized assemblies, not really debug).
How can I get past this? I need the WP80 assembly because I use Bing Search in my app.
Jason Short

Hello Nageshwar,
the likely root cause of this issue is the lack of permissions for the user on the shadow instance.
Please review note #592514 and check your users' rights accordingly.
Best regards,
Tomas Black

Similar Messages

  • An error occurred during the installation of assembly 'policy e0.Microsoft.VC80.CRT.type="win32-policy" version "8.0.50727.4053", publicKeyToken="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"'.  Please refer to Help and Support for more information.  H

    An error occurred during the installation of assembly 'policy 80.Microsoft.VC80.CRT.type="win32-policy" version+"8.0.50727.4053", publicKeyToken="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"'.  Please refer to Help and Support for more information.  HRESULT: x...
    Encountered during reinstall of iTunes.  Any ideas?

    It is a big issue for many users.  There is no clear fix yet, but some users have had success with some of the solution on this thread.
    https://discussions.apple.com/message/16751339#16751339

  • Hi, can anyone help me because I've been trying to download the iTunes and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..

    Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.

    it says that Windows Resource Protection could not start the repair service.
    Okay. We've got a broken Windows Modules Installer on the PC, then.
    It's a bit of an involved fix getting past it, but we've had success here with it in the past.
    First, I'd strongly suggest setting up a system restore point.
    Now try the Scenario III treatment from the following document:
    Windows Update Error 80070424 in Vista
    Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
    Windows Update error 8000FFFF
    If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
    After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
    Now try another iTunes install. Does it go through without the 0x80070424 this time?

  • Error message: JPS-01538: The default policy provider was not found..winXP

    Hi All,
    i am getting "Error message: JPS-01538: The default policy provider was not found" error when i am tryin to start Oracle Admin Server(11.1.1.3.0) after installing on Windows XP.
    Please see the below log and help me to solve this issue.
    ==============================================================================
    Thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1394)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.security.jps.JpsRuntimeException: JPS-01538: The default policy provider was not found.
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:273)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.security.jps.JpsException: JPS-01538: The default policy provider was not found.
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:705)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.security.jps.JpsException: JPS-01514: The default context is missing in jps-config.xml.
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:665)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
         at oracle.security.jps.internal.credstore.ssp.CsfWalletManager.openWallet(CsfWalletManager.java:177)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.doInit(SspCredentialStore.java:218)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:140)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:127)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:115)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:53)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:133)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:128)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:656)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<Jun 11, 2010 1:09:07 PM IST> <Notice> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276241947534> <BEA-000365> <Server state changed to FAILED>
    ####<Jun 11, 2010 1:09:07 PM IST> <Error> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276241947534> <BEA-000383> <A critical service failed. The server will shut itself down>
    ####<Jun 11, 2010 1:09:07 PM IST> <Notice> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276241947534> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Jun 11, 2010 1:09:07 PM IST> <Info> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276241947550> <BEA-000236> <Stopping execute threads.>
    =============================================================================
    your help in this regard is much apprciated.
    Thanks
    Kiran

    Hi,
    i found solution actually i installed forms 11g along with soa suite 11g which was conflicting because forms 11g was 11.1.2 and soa suite domain was 11.1.3
    so i guess its a same issue conflict between PS1 and PS2

  • Error while executing BEx Query on Composite Provider

    Hi,
    We have a BW on-HANA system, patch level SAPKW73105.
    We have created a Composite provider based on the union of two DSOs, two infoobjects, one SPO, and there are a couple of joins with two other DSOs, on the top of that we built a BEx query.
    While executing the BEx query, sometimes (depending on the filter values), We got the following error message
    "Attribute engine failed;Error executing physical plan: exception 6900: AttributeEngine/Parallel/DimensionFilter.cpp engine failed; $function$=getValidFemsPA;"
    "Error 6,900 has occurred in the BWA/SAP HANA server"
    "Error reading the data of InfoProvider @3ZSDRPCP5"
    "Error while reading data; navigation is possible"
    "Row: 59 Inc: MAP_TREX_EXCEPTION Prog: CL_RSDRH_TREX_STORAGE"
    (Attached error message)
    Ii We browse the composite provider data using the "display data" option in the RSA1, data is displayed without issue, the problem only appears during the BEx query execution and only with some filter vaues.
    Any idea on how to fix the issue.
    Thanks,
    Federico

    He's on 7.3 EhP1, which is on SPS12 today. It got pretty stable by SP08, SP09. SP05 was pretty early on, and had a lot of bugs in the HANA views.
    7.4 is on SP07 like you say, and most of our customers run at least SP06 - before then, you had to apply a bucketload of SAP notes. I would recommend customers apply SP08 with care because it's a feature release so will have a bunch of new features, which will no doubt need corrections.

  • When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitct

    When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitecture = "x86" Please refer to help and support.
    Ok I cant find a way to fix this so I basically cant use my Verizon Iphone 4 because it wont connect on an old version...

    OK.  You may have to reinstall everything from scratch but follow following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.4053",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer to Help and Support for more info

    I have been receiving this error trying to install SQL Server 2012. Initially I already had SQL Server 2012 on my machine and attempted to install BIDS 2008. My IT guy stated that there was a conflict in the installation and suggested that I uninstall SQL
    Server 2012 and then attempt to install 2008 BIDs again. Fail. I got a similar error as I pasted below. Giving up on having 2008 BIDS I've been trying to reinstall 2012 SQL Server but am getting this message below.
    The links provided by this message are no help at all (For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401)
    I've attempted to repair my .NET framework, didn't help.
    I've followed the steps in these threads (http://support.microsoft.com/kb/2688946), (https://support.microsoft.com/kb/957310?wa=wsignin1.0) and (https://social.msdn.microsoft.com/Forums/en-US/beeceb19-69cc-4044-94f0-591feec04626/an-error-occurred-during-the-installation-of-assembly-microsoftvc80crt-public-key),
    neither one fixed the error.
    Any help? Anyone else run into this error? What should I do?
    TITLE: Microsoft SQL Server 2012  Setup
    The following error has occurred:
    An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="e03584ff-5e55-4073-ac2e-d3e07379c0ae">,</gs>version="8.0.50727.4053"<gs
    class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="20b968d8-03a3-4284-bffc-0cc1a90d2aac">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
    ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="9b86ea8f-9852-4110-a616-a1e085d740c6">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8"
    id="f52b7568-d5e6-4099-a8ee-ebc11fbf4acc">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712. 
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401
    BUTTONS:
    OK
    TITLE: Microsoft SQL Server 2012  Setup
    The following error has occurred:
    SQL Server Setup has encountered an error when running a Windows Installer file.
    Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="297b0922-8852-404d-9dc1-a9b38415a2e5">,</gs>version="8.0.50727.4053"<gs
    class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="785a0f51-5ed5-41ee-97a8-8fc31122e2ae">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
    ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="8aa968bd-ff25-4e9d-9109-a219a98ee5e8">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3"
    id="aa9e7ba2-4f5a-4d89-bf64-dcff0714afaa">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712. 
    Windows Installer file: c:\2f4e5903553a88acc6726f538e140c4d\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
    Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150213_150637\SqlSupport_Cpu64_1_ComponentUpdate.log
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325
    BUTTONS:
    &Retry
    Cancel

    Hi Gurmo,
    HRESULT: 0x80073712 means ERROR_SXS_COMPONENT_STORE_CORRUPT, and it is one of the error codes listed at this
    KB article.
    I suggest you run the System Update Readiness tool and check if the error still persists.
    There is a similar thread for your reference.
    https://social.technet.microsoft.com/Forums/en-US/0b3d0479-b9c0-4551-a623-1519ce7584af/error-when-installing-sql-server-2008-r2-rtm-on-windows-server-2008-r2-foundation?forum=winservergen
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

    Hello Everyone,
    We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found."  We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
    Kindly help if anyone has faced the same problem with SAP BO 4.1.
    Thanks and Best Regards,
    Ghosal

    Hello Everybody,
    The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
    Thanks for your support.
    Best Regards,
    Ghosal

  • An error occurred during the installation of assemble, an error occurred during the installation of assemble

    an error occurred during the installation of assemble
    microsoft.vc80.crt,type=''win32'',version=''8,0.50727,4053'',publickey token=''1fc8b9a1e18e3b'',process
    or architecture=''amd64''.please refer to help and support for more information,hresult:0x800736fd.

    Hi,
    You may disable antispyware and antivirus software or remove adware or spyware from your computer and then install Acrobat or Adobe Reader as BrianD_22932 mentioned.
    As I known, a certain type of adware running on the system can cause 1935 errors.
    I would like to suggest you remove adware and then install Acrobat or Adobe Reader.
    1. Start the Task Manager.
    2. Look at the Processes tab. Look for a  process named wtoolsa.exe.
    3. If this process is running, then you remove this adware.
    4. Install Acrobat or Adobe Reader again.
    In some cases, the 1935 error results from orphaned registry keys from a different version of the .NET Framework than the one being installed. Uninstalling the .NET
    frameworks, removing orphaned registry keys that can remain, then reinstalling the .NET Framework can help in this situation.
    Regarding the error 1935, it seems this is a general Acrobat related issue, I would like to share the link below with you:
    Acrobat X installation freezing windows 7
    http://forums.adobe.com/message/3292028
    Please follow the steps from the link above to fix the issue.    
    Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • An error has occurred because a control with id '%spPlaceHolderMain%' could not be located or a different control is assigned to the same ID after postback.

    Hello All, When i try to do a filter on an entity and click filter button, i see the below error message being popped up. Can someone provide a solution to this ?
    "An error has occurred because a control with id '%spPlaceHolderMain%' could not be located or a different control is assigned to the same ID after postback. If the ID is not assigned, explicitly set the ID property of controls that raise postback events
    to avoid this error."
    Please let me know the process to set the ID explicitly.

    Can you try resetting the IIS?

  • ERROR: Ignore information because the message has no hash payload

    Hi,
    I am trying to connect to a VPN provided by a RV120W router. The client connection times out and the following message appears in the router log:
    [rv120w][IKE] ERROR:  Ignore information because the message has no hash payload.
    VPN client is Shrew Soft VPN client v2.1.5
    Operating System: Ubuntu 11.04
    Does anyone know what is causing the problem?
    Thanks,
    Kevin

    After some wigeling and changing all is working
    This problem is solved, it was a wrong pasword encryption setting between routers

  • Error: Could not load file or assembly 'Microsoft.Activities, Version=1.0.0.0

    Hi,
    I am using VS 2012 to create custom sequential workflows (2010 model). The workflows created in VS 2010 are working fine, but the workflow created in VS 2012 is throwing the error.
    When the workflow is run, I am getting the below error:
    Error:
    Could not load file or assembly 'Microsoft.Activities, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
    Stack Trace: at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean
    forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean
    throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.Assembly.Load(AssemblyName assemblyRef) at System.Workflow.Activities.Rules.SimpleRunTimeTypeProvider.get_ReferencedAssemblies() at System.Workflow.Activities.Rules.RuleValidation.DetermineExtensionMethods()
    at System.Workflow.Activities.Rules.RuleValidation.get_ExtensionMethods() at System.Workflow.Activities.Rules.RuleValidation.GetNamedMethods(List`1 targetTypes, String methodName, BindingFlags methodBindingFlags) at System.Workflow.Activities.Rules.RuleValidation.ResolveMethod(Type
    targetType, String methodName, BindingFlags methodBindingFlags, List`1 argumentExprs, ValidationError& error) at System.Workflow.Activities.Rules.MethodInvokeExpression.Validate(CodeExpression expression, RuleValidation validation, Boolean isWritten) at
    System.Workflow.Activities.Rules.RuleExpressionWalker.Validate(RuleValidation validation, CodeExpression expression, Boolean isWritten) at System.Workflow.Activities.Rules.RuleValidation.ValidateConditionExpression(CodeExpression expression) at System.Workflow.Activities.Rules.RuleExpressionCondition.Validate(RuleValidation
    validation) at System.Workflow.Activities.Rules.RuleConditionReference.Evaluate(Activity activity, IServiceProvider provider) at System.Workflow.Activities.IfElseActivity.Execute(ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T
    activity, ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.FaultAndCancellationHandlingFilter.Execute(Activity activity, ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime
    workflowCoreRuntime) at System.Workflow.Runtime.Scheduler.Run()
    How to fix this?
    Thanks

    Hi,
    The machine in which the workflow was created is different from the machine it is deployed.
    Which dll should be available? Is the dll not part of SharePoint 2013?
    Is this part of workflow Manager?
    Thanks

  • Cannot submit app update - "Error The submission can only contain one appx or one appxbundle."

    I'm trying to submit my app update to the store and I get the following error:
    Error
    The submission can only contain one appx or one appxbundle.
    So I thought I should maybe utilize the "Delete" option to allow me to submit an updated appx or appxbundle (since these are the only file types that App Studio allows us to build). However, when I do, I get the
    following message:
    Can't delete this package
    You must have at least one 8.1 package in your submission.
    ... So I'm basically stuck. Can't delete to upload a new one. Can't upload a new one because there's one already there. It would be nice if you could automatically sunset the old appx/appxbundle package in favor of the new
    one.
    Update: Solved! Solution below.

    Since this is still an issue, shouldn't it be escalated for a fix so that the page works on any modern browser?
    I see two independent problems here:
    - Hitting Delete should work, not bash the user with a "You must have at least one 8.1 package in your submission." message (i.e. allow the developer to delete and then add a new file, if so desired). After all, when making the initial submission
    we are in the same situation (no file yet), so it can't be that bad, as long as this is checked for at a later stage.
    - Show that Replace button which seems to be hiding! If it is a Silverlight issue, why require Silverlight in the first place?
    P.S.: I am experiencing this with IE (no Replace button, Windows 8.1 x64 and latest updates).

  • I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

    I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error   "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

    Repair your Apple Application Support.
    Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

  • HT201210 my iphone 3gs is showing errors wen i turn on debug and some apps will open and then close.

    my iphone 3gs is showing errore wen i turn on debug and some apps will open and then close

    There's an apple store in my city but it is about a 20 minute drive and I do not have apple care. Do you think they would still help me?

Maybe you are looking for