Error in updating the source table in mapping

Hi All,
I have a mapping in which I am fetching records from a table A, performing some expression logic and then using a Splitter operator to update my target table Bas well as update one of the columns of my source table A(to indicate that record has been processed). When I execute the mapping, updation of target table B works, but updting my source table A does nt work and the job completes succesfully?
Can somebody please help me to debug this?
Thanks

Hi,
Please check the splitter condition for the two groups that you have set. This might be a case where you have put such a condition in splitter that all the record sets are going to the target table and none are going to the source table. Therefore the source table is not getting updated by any record.
Regards
-AP

Similar Messages

Regardig error while updating the database table

hi experts,
   i m trying to update the database table from the values containig in my internal table ,,,but the system is giving this error plz help me::::
The type of the database table and work area (or internal table)
"ITAB_UPDATE" are not Unicode convertible. Unicode convertible.
my internal table name itab_update and the database table name yitab.i m using this statement::
    modify yitab from itab_update.

Hi
1. You have to Declare the Itab with the same structure as DB table.
2. Use the statement
    Modify <DBtable> from TABLE <itab>.
or
   Update <DBtable> from TABLE <itab>.
Hope this will solve.
Reward .....if so.
Regards.

MERGE error : unable to get a stable set of rows in the source tables

Hi,
For an update, the following MERGE statement throws the error-unable to get a stable set of rows in the source tables:
MERGE INTO table2t INT
USING (SELECT DISTINCT NULL bdl_inst_id,.......
FROM table1 ftp
WHERE ftp.gld_business_date = g_business_date
AND ftp.underlying_instrument_id IS NOT NULL) ui
ON ( ( INT.inst_id = ui.inst_id
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.ric = ui.ric
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.isin = ui.isin
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.sedol = ui.sedol
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.cusip = ui.cusip
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
WHEN MATCHED THEN
UPDATE
SET INT.inst_id = ui.inst_id, INT.ric = ui.ric
WHEN NOT MATCHED THEN
INSERT (inst_key, ......)
VALUES (inst_key, ......);
To determine the existence of a record, first check if any match is found on the first key, if not then search for the second key and so on.
Now two records with differenct first key, i.e. inst_id, can have the same ric(second key). On a rerun, with the target table already populated, the code fails. The reason is it finds duplicate entries for the second key.
Any suggestions on how to make this work?
Thanks in advance.
Annie

Annie
You've spotted the problem (that two records have the same RIC). MERGE doesn't allow that; each record in the data being updated is only allowed to be updated once.
Is there a PK column (or columns) that we can rely on?
What you can try is to outer join FTP to INT. Something like:
MERGE INTO INT int1
USING (
    select columns_you_need
    from (
        select ftp.columns -- whatever they are
               , int2.columns
               , row_number() over (partition by int2.pk_columns order by int2.somecolumns) as rn
        from   ftp
        left join int int2
        on (the condition you used in your query)
    where rn=1
) s
WHEN MATCHED THEN UPDATE ...
WHEN NOT MATCHED THEN INSERT ...So if you can restrict the driving query so that only the first one of the possible updates actually gets presented to the MERGE operation, you might be in with a chance :-)
And of course this error is nothing to do with any triggers.
HTH
Regards Nigel

Get Error while update the User defined row table through DSK Code

Hi experts,
I have got an error while updating the user row defined table.
Error is - "Invalid row"
I have created one master table "@CBF_FARM " and Child table "@CBF_FAR1"
First i inserted 5 record in the child table so in my my child table there are 5 Line id (1,2,3,4,5 one for each row).
after that i delete 2 rows (3rd & 4th row) from child table now in my child table there are 3 rows( Line id 1, 2, 5). Please See attachment.
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
Following Code used for updating the user defined child table.
SAPbobsCOM.GeneralService oGeneralService1 = null;
                                SAPbobsCOM.GeneralData oGeneralData1 = null;
                                SAPbobsCOM.GeneralDataParams oGeneralParams1 = null;
                                SAPbobsCOM.CompanyService sCmp1 = null;
                                SAPbobsCOM.GeneralData oChild1 = null;
                                SAPbobsCOM.GeneralDataCollection oChildren1 = null;
                                sCmp1 = clsAddOn.LDNA_Company.GetCompanyService();
                                oGeneralService1 = sCmp1.GetGeneralService("CBF_FARM");
                                // Get UDO record
                                oGeneralParams1 = ((SAPbobsCOM.GeneralDataParams)(oGeneralService1.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)));
                                oGeneralParams1.SetProperty("Code", oForm.Items.Item("edtFarmCd").Specific.Value);
                                oGeneralData1 = oGeneralService1.GetByParams(oGeneralParams1);
                                // Add lines on UDO Child Table
                                oChildren1 = oGeneralData1.Child("CBF_FAR1");
                                // Create data for rows in the child table
                                SAPbouiCOM.Item oItem = oForm.Items.Item("cmbShed");
                                oCombo = oItem.Specific;
                                string ShedCode = oCombo.Selected.Value;
                                ldna_Rec = clsAddOn.LDNA_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                                string strQuery1 = "select LineId from [@CBF_FAR1] where U_ShedCd = " + ShedCode;
                                ldna_Rec.DoQuery(strQuery1);
                                oChild1 = oChildren1.Item(ldna_Rec.Fields.Item("LineId").Value - 1);
                                oChild1.SetProperty("U_Status", "Ready For Schedule");
                                //Update the UDO Record
                                oGeneralService1.Update(oGeneralData1);
Please Help me it is an urgent requirement,
-Regards
Vikas

hi.
Error is - "Invalid row"
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
As per my knowledge
What i understood is you have 5 lines and you are going to be update 5th line
am i correct..
while u are updating the line in child table
you have to consider like this..
line number         u have to update like
1                                        0
2                                        1
3                                        2
4                                        3
5                                        4
which means in child table treat
line 1 as 0
line 2 as 1
line 5 as 4
If you want to update the line 5 u have to mention 4 th line

Dynamically passing the source table name to OWB mapping

I am building a mapping wherein one of the source tables is a view. The view name varies with the time parameter I pass in. I am looking at ways to pass in the time parameter to the mapping procedure such that it first gets the view name from a table and uses that view as the source table to fetch data. Any directions?
In normal PL/SQL coding, I can first get the view name and use this view name to buld a dynamic query, which can be then executed.

This is a common question. The best way to do this is to use a synonym.
Create the synonym in the database and import into OWB. Use the synonym in your mapping. Have your mapping accept a mapping input for the table you want the synonym to point to. Setup a premapping process to re-create the synonym with the table you want to use.
Here is the procedure that I use. It defaults to a private synonym. Remember, the synonym will be created in the same schema that the mapping is deployed to.
CREATE OR REPLACE PROCEDURE "CAWDATA"."CREATE_SYNONYM_PRC" ("P_SYNONYM_NAME" IN VARCHAR2, "P_OBJECT_NAME" IN VARCHAR2,
"P_IS_PUBLIC_SYNONYM" IN BOOLEAN DEFAULT false) IS
BEGIN
if p_is_public_synonym = true then
execute immediate 'create or replace public synonym '|| p_synonym_name || ' for '|| p_object_name;
else
execute immediate 'create or replace synonym '|| p_synonym_name || ' for '|| p_object_name;
end if;
exception
when others
then
raise_application_error(sqlcode,sqlerrm) ;
END;

MERGE Statement - unable to get a stable set of rows in the source tables

OWB Client: 10.1.0.2.0
OWB Repository: 10.1.0.1.0
I am trying to create a MERGE in OWB.
I get the following error:
ORA-12801: error signaled in parallel query server P004 ORA-30926: unable to get a stable set of rows in the source tables
I have read the other posts regarding this and can't seem to get a fix.
The target table has a unique index on the field that I am matching on.
The "incoming" data doesn't have a unique index, but I have checked and confirmed that it is unique on the appropriate key.
The "incoming" data is created by a join and filter in the mapping and I'd rather avoid having to load this data into a new table and add a unique index on this.
Any help would be great.
Thanks
Laura

Hello Laura,
The MERGE statement does not require any constraints on its target table or source table. The only requirement is that two input rows cannot update the same target row, meaning that all existing target rows can be matched by at most one input row (otherwise the MERGE would be undeterministic since you don't know which of the input rows you would end up with in the target).
If a table takes ages to load (and is not really big) I suspect that your mapping is not running in set mode and that it performs a full table scan on source data for each target row it produces.
If you ARE running in set mode you should run explain plan to get a hint on what is wrong.
Regarding your original mapping, try to set the target operator property:
Match by constraint=no constraints
and then check the Loading properties on each target column.
Regards, Hans Henrik

Jython error while updating a oracle table based on file count

Hi,
i have jython procedure for counting counting records in a flat file
Here is the code(took from odiexperts) modified and am getting errors, somebody take a look and let me know what is the sql exception in this code
COMMAND on target: Jython
Command on source : Oracle --and specified the logical schema
Without connecting to the database using the jdbc connection i can see the output successfully, but i want to update the oracle table with count. any help is greatly appreciated
---------------------------------Error-----------------------------
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 45, in ?
java.sql.SQLException: ORA-00936: missing expression
---------------------------------------Code--------------------------------------------------
import java.sql.Connection
import java.sql.Statement
import java.sql.DriverManager
import java.sql.ResultSet
import java.sql.ResultSetMetaData
import os
import string
import java.sql as sql
import java.lang as lang
import re
filesrc = open('c:\mm\xyz.csv','r')
first=filesrc.readline()
lines = 0
while first:
#get the no of lines in the file
lines += 1
first=filesrc.readline()
#print lines
## THE ABOVE PART OF THE PROGRAM IS TO COUNT THE NUMBER OF LINES
## AND STORE IT INTO THE VARIABLE `LINES `
def intWithCommas(x):
if type(x) not in [type(0), type(0L)]:
raise TypeError("Parameter must be an integer.")
if x < 0:
return '-' + intWithCommas(-x)
result = ''
while x >= 1000:
x, r = divmod(x, 1000)
result = ",%03d%s" % (r, result)
return "%d%s" % (x, result)
## THE ABOVE PROGRAM IS TO DISPLAY THE NUMBERS
sourceConnection = odiRef.getJDBCConnection("SRC")
sqlstring = sourceConnection.createStatement()
sqlstmt="update tab1 set tot_coll_amt = to_number( "#lines ") where load_audit_key=418507"
sqlstring.executeQuery(sqlstmt)
sourceConnection.close()
s0=' \n\nThe Number of Lines in the File are ->> '
s1=str(intWithCommas(lines))
s2=' \n\nand the First Line of the File is ->> '
filesrc.seek(0)
s3=str(filesrc.readline())
final=s0 + s1 + s2 + s3
filesrc.close()
raise final

i changed as you adviced ankit
am getting the following error now
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 37, in ?
java.sql.SQLException: ORA-00911: invalid character
here is the modified code
sourceConnection = odiRef.getJDBCConnection("SRC")
sqlstring = sourceConnection.createStatement()
sqlstmt="update tab1 set tot_coll_amt = to_number('#lines') where load_audit_key=418507;"
result=sqlstring.executeUpdate(sqlstmt)
sourceConnection.close()
Any ideas
Edited by: Sunny on Dec 3, 2010 1:04 PM

How do I create a target table with the same PK as the source table?

I am trying to create a target table in a mapping that will end up with the same primary key as the source table.
It is a simple map that simply uses a subset of the columns of the source table in the target table. I was wanting to create and bind a new table by dragging the columns I want from the source to the initially blank target table operator, change the column names and create a primary key to match the source table.
I can't seem to be able to create a constraint on the table in the mapping. I can create the constraint after the table is created and boound to the database object but the PK doesn't carry back into the mapping.
I need it in the mapping so I can use the UPDATE/INSERT operation and use the 'All Constraints' implementation. The mapping won't let me validate the object without the PK on it in the map.
Believe it or not folks, I am getting better at this.
Thanks very much for the guidance.
Gary

Hi Gary
You are close, you are really close... :-))
You need to do exactly as you propose plus one extra step. Build the map as you describe, binding the new table to the target. Then you edit the table definition to add the primary key and any other constraints you need. After this is the step that you are missing.
You need to do the following:
1. Go back and re-edit the map
2. Right click on the table
3. From the pop up menu, select Reconcile Inbound
4. Set any operators that you need for the UPDATE/INSERT
5. Save the map
6. Commit your changes
The first three steps above make the map read in the indexes and constraints that you set on the table. Finally, you need to deploy the table and then deploy the map.
Hope this helps
Regards
Michael

Best approach to delete records that are not in the source table anymore.

I have a situation where I need to remove records from dimensions that are not in the source data anymore. Right now we are not maintaing history, i.e. not using SCD but planning for the next release. If we did that it would be easy to figure the latest records. The load is nightly and records are updated and new added.
The approach that I am considering is to join the dimension tables the the sources on keys and delete what doesn't join. However, is there perhaps some function in OWB that would allow to do this automatically on import so it can be also in place for the future?
Thanks!

Bear in mind that deleting dimension records becomes problematic if you have facts attached to them. Just because this record is no longer in the active set doesn't mean that it wasn't used historically, and so have foreign key constraints on it in your database. IF this is the case, a short-term solution would be to add an expiry_date field to the dimension and update the load to set this value when the record disappears rather than to delete it.
And to do that, use the target dimension as a source table, outer join it to the actual source table on the natural key, and so your update will set expiry_date=nvl(expiry_date,sysdate) to set to sysdate if this record has not already been expired on all records where the outer join fails.
Further consideration: what do you do if the record is re-inserted into the source table? create a new dimension key? Or remove the expiry date?
But I will say that I am not a fan of deleting records in most circumstances. What do you do if you discover a calculation error and need to fix that and republish historical cubes? Without the historical data, you lose the ability to do things like that.

Error: None of the fact tables are compatible with the query request

Hi experts,
I have one confirm dimension D1 and other two fact table F1 and F2 (F1 and F2 are connected to D1)
when i create a report from D1 and F1 the report is running fine. But pull the column from F2 also in this report i am getting the following error
None of the fact tables are compatible with the query request Code Combinations
please suggest on the same.
Regards,
S

Hi
i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
Gl Balances : D1
Code Commbination: F1
Gl Sets Of Books : F2
I have checked the joins in physical and BMM layer..all are fine..

In OWB I need to update the target table with same field for match/update

In OWb I am trying to update the target table with the match and the update on the same field can this be done. I am getting a error match merge error saying you cannot update and match on the same field. But in SQl my select is
Update table
set irf = 0
where irf = 1
and process_id = 'TEST'
Hwo do i do this in OWB.

table name is temp
fields in the table
field1 number
field2 varchar2(10)
field3 date
values in the table are example
0,'TEST',05/29/2009
9,'TEST',05/29/2009
0,'TEST1',03/01/2009
1,'TEST1',03/01/2009
In the above example I need to update the first row field1 to 1.
Update temp
set field1 = 1
where field1 = 0
and field2 = 'TEST'
when I run this I just need one row to be updated and it should look like this below
1,'TEST',05/29/2009
9,'TEST',05/29/2009
0,'TEST1',03/01/2009
1,'TEST1',03/01/2009
But when I run my mapping I am getting the rows like below the second row with 9 also is getting updated to 1.
1,'TEST',05/29/2009
1,'TEST',05/29/2009
0,'TEST1',03/01/2009
1,'TEST1',03/01/2009

ORA-30926: unable to get a stable set of rows in the source tables

hi,
I am loading data from source table to target table in a interface.
Using LKM incremental update .
In the merge rows step , getting the below error.
30926 : 99999 : java.sql.SQLException: ORA-30926: unable to get a stable set of rows in the source tables
please help as what should be done to resolve this.

Below is the query in the merge step...
when i run from SQL also, same error
SQL Error: ORA-30926: unable to get a stable set of rows in the source tables
30926. 00000 - "unable to get a stable set of rows in the source tables"
*Cause:    A stable set of rows could not be got because of large dml
activity or a non-deterministic where clause.
*Action:   Remove any non-deterministic where clauses and reissue the dml.
merge into     TFR.INVENTORIES T
using     TFR.I$_INVENTORIES S
on     (
          T.ORGANIZATION_ID=S.ORGANIZATION_ID
     and          T.ITEM_ID=S.ITEM_ID
when matched
then update set
     T.ITEM_TYPE     = S.ITEM_TYPE,
     T.SEGMENT1     = S.SEGMENT1,
     T.DESCRIPTION     = S.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT     = S.LIST_PRICE_PER_UNIT,
     T.CREATED_BY     = S.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE     = S.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG     = S.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY     = S.LAST_UPDATED_BY
     ,T.ID     = TFR.INVENTORIES_SEQ.NEXTVAL,
     T.CREATION_DATE     = CURRENT_DATE,
     T.LAST_UPDATE_DATE     = CURRENT_DATE
when not matched
then insert
     T.ORGANIZATION_ID,
     T.ITEM_ID,
     T.ITEM_TYPE,
     T.SEGMENT1,
     T.DESCRIPTION,
     T.LIST_PRICE_PER_UNIT,
     T.CREATED_BY,
     T.DEFAULT_SO_SOURCE_TYPE,
     T.MATERIAL_BILLABLE_FLAG,
     T.LAST_UPDATED_BY
     ,T.ID,
     T.CREATION_DATE,
     T.LAST_UPDATE_DATE
values
     S.ORGANIZATION_ID,
     S.ITEM_ID,
     S.ITEM_TYPE,
     S.SEGMENT1,
     S.DESCRIPTION,
     S.LIST_PRICE_PER_UNIT,
     S.CREATED_BY,
     S.DEFAULT_SO_SOURCE_TYPE,
     S.MATERIAL_BILLABLE_FLAG,
     S.LAST_UPDATED_BY
     ,TFR.INVENTORIES_SEQ.NEXTVAL,
     CURRENT_DATE,
     CURRENT_DATE
     )

RPLDAP_EXTRACT - Error when updating the LDAP directory

I am connecting SAP IdM 7.0 to SAP HCM via VDS.
So far:
The VDS responds to LDAP browser, the connection tests from SAP GUI are succesful.
I can execute my copy of the standard report LDAPEXTRACT46C in SAP GUI and can see what data is exported.
I get the "Error when updating the LDAP directory" error when trying to execute the RPLDAP_EXTRACT program.
An error occurred during creation of one or more data records in the LDAP directory. The error has been logged in the system used to export data to the LDAP directory.
You can find logs in the database tables TLDA_LOG (HR-LDAP: Non-Exported Data Records) and TLDA_MSG (Error Messages About Data in Table TLDA_LOG). Table TLDA_LOG contains data records that could not be exported; table TLDA_MSG contains the corresponding messages.
I didn't see anything that makes sense in tables mentioned in the error message above.
I have some questions as the documentation supplied with IdM is bit brief; According to the configuration guide I don't need to have any mapping in VDS like "conversion of internal attributes" or "conversion from internal attributes", has anyone else entered the mapping in VDS?
Any pointers in going forward?
Edited by: pasikuikka on Oct 20, 2009 11:01 AM

Hi Pasikuikka,
just a few questions:
Have you checked TA HRLDAP_MAP? (Each field must have its expression in the LDAP-Target)
Have you checked TA LDAPMAP? (Each field must have its expression in the LDAP-Target)
Maybe there are attributes listed in the query, but not in the HCM-Staging-Area in the Identity Center.
Have been new attributes created in the HCM-Staging-Area and, if so, are they connected to the right Entry-Type (MX_HCM_Employee or something like that)?
Hope this puts you on the right track.
Kind regards,
Achim Heinekamp

Error while updating the plan in Enterprise link

hi
i am getting an error while updating the plan which polls the JMS topic and inserts into the grid.
IMessageSourceReceiver->messageReceive: javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
     at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:916)
     at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:601)
     at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:238)
     at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:183)
     at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:209)
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:94)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "Untitled, created 3/11/2009 3:56:28 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
the username and password that i have given are valid and i have given privileges that were mentioned on the technote to the user. can somebody help me out in resolving this as this is very critical for me right now
Thanks in advance

I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad

Error in Updating the Prices through DTW

Hello Expert,
I am getting an error while updating the item prices through DTW.
I upload all the items in SAP and prices in Price List 01
Now I create One more Price List with Other name and want to update the Price in this Pricelist for all items through DTW
but system giving an error "this entry is already present in Table(ODBC-2035) Application Defined or Object Defined ErrorItems"
SAP 8.8
PL 5
Regards
Atif

What Neetu suggests is great. However, you will run into problems if your users have deleted a price list. Perform the following query as suggested:
SELECT T0.[ListNum], T0.[ListName] FROM OPLN T0
Copy this to excel and create a further column called 'RealNumber' or something
Start numbering cells in this new column from 0 to whatever you need to cover all the lists from the database.
The number in the 'Real Number' column is the one you should insert into the LineNum field in the prices spreadsheet.
Hope this helps. Reply if you need more guidance.
Regards
Bob

Error in updating the source table in mapping

Similar Messages

Maybe you are looking for