Error in Ws to File Scenario

Hi,
The Below error is displayed when executiong the proxy.
<?xml version="1.0" encoding="utf-8" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<SYSTEMFAULT href="#o239" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_AI_SYSTEM_FAULT id="o239">
- <CX_ROOT>
<TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>97</PROGID>
<CONTID>3413</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_AI_SYSTEM_FAULT>
<CODECONTEXT />
<CODE>RCVR_DETERMINATION.NO_RECEIVER_CASE_BE</CODE>
<ERRORTEXT>No receiver could be determined</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
</asx:heap>
</asx:abap>
I am using the Webservice URL:http://www.webservicex.net/CurrencyConvertor.asmx?wsdl.
Senderinterfacename:CurrencyConvertorSoap_out
SenderinterfacenameSpace:http://www.webserviceX.NET/
I am calling the above url (CurrencyConvertorSoap->http://www.webserviceX.NET/) by creating Proxy.
Up on executing the same ,I am Getting the above error as pasted.
Pl look in to it and let me know the solution.
Thanks,
Srinivasa

Hi Srini,
    Can you explain detail?
    How you used ws to file with proxy..
    I thing your creating outbound proxy.In that your calling the URL and passed some value and get the
    response back. You passed that response to XI.If that may right then there is no need for sender
    communication chennal and Sender Agreement.Create a Receiver Determination with your Business
    system Select your message interface.
Regards,
Prakasu

Similar Messages

Error in Idoc-XI-File scenario

dear all,
i am doing one Idoc to Xi and then to a flat file scenario. i have created one BS of type 3rd party for receiver and ont BS of type Web as ABAP. Then I created one namespace and import the Idoc type there. I have not created any DT, MT, MI, MM. I have created one interface Mapping where both sender & receiver has same structure & I have selected there mapping type of ABAP-Class with one Z program name.
Then, in ID, I created two CC channel one as receiver of File type & second sender as Idoc type.
Now, the thing is tht I am not able to get the file at the receiver end. Can anybody help me tht where I am doing an error?
Warm Rgards,
N.Jain

Then, in ID, I created two CC channel one as receiver of File type & second sender as Idoc type. 
>>
you dont need a Sender IDoc channel to be configured.
Now, the thing is tht I am not able to get the file at the receiver end. Can anybody help me tht where I am doing an error?
>>>
1. what does it say in SXMB_MONI ? Has the IDoc come into XI ?
2. In communication channel monitoring what is the error for the recv. file adapter

How to suppress the Acknowledgement Error in IDOC to File scenario?

Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
Tirumal

Hi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy

Error in HTTP to file scenario

Hey guys
we have a HTTP to file scenario in which our client has to send the Invoices over HTTP in XML format,when we test the scenario from within our landscape we are getting the output file correctly but when we test from the client site,we get an error message saying that the file has missing semi colon (,the URL which we are getting from the local HTTP client is something like this
http://scosap005.sap.com:8001/sap/xi/adapter_plain?namespace=urn%3ANOVInvoiceToSCO&interface=MI_Invoice_sender&service=BS_test_invo&party=&agency=&scheme=&QOS=EO&queueid=httpclient&sap-user=&sap-password=&sap-client=100&sap-language=EN
and the one which we are getting from the client is
http://xx.xxx.xx.xx:8001/sap/xi/adapter_plain?namespace=urn%3ANOVInvoiceToSCO&interface=MI_Invoice_sender&service=BS_test_invo&party=&agency=&scheme=&QOS=EO&queueid=httpclient&sap-user=&sap-password=&sap-client=100&sap-language=EN
why am i getting this error?
thanx
ahmad

Hey guys
i m having a very strange problem with my scenario,we are doing a HTTP to file scenario,now as both the sender and receiver have same structure i havent done any mapping,client is sending XML over HTTP from another location which is not in our landscape,he is using web methods Business connector .when he send us the XML message to our XI server some stuffs are added at the top of the payload,its something like this
namespace=urn%253ANOVInvoiceToSCO&interface=MI_Invoice_sender&service=BS_test_invo&party=&agency=&scheme=&QOS=EO&queueid=httpclient&sap-user=nov_test&sap-password=xi_test&sap-client=100&sap-language=EN&
these are actually the parameters which are used in the URL to send the XML to us.but because of this i m unable to process the XML .
so my XML looks something like this
namespace=urn%253ANOVInvoiceToSCO&interface=MI_Invoice_sender&service=BS_test_invo&party=&agency=&scheme=&QOS=EO&queueid=httpclient&sap-user=nov_test&sap-password=xi_test&sap-client=100&sap-language=EN&
<?xml version="1.0" encoding="UTF-8"?>
<Invoice transactionPurposeIndicator="Original">
 <InvoiceProperties>
 <InvoiceNumber>0094372098</InvoiceNumber>
 <InvoiceDate>20070319</InvoiceDate>
 <VendorNumber>VENDOR #</VendorNumber>
but when i try this scenario from within our landscape it works fine and nothing is added on top of XML.
they are sayin that nothin extra is being added from thr side and their XML does not have the extra addition on top.
how should i solve dis problem?
its urgent
thanx
ahmad

Error in IDoc to file scenario

Hi Experts,
I am working on IDoc to File scenario.IDoc is sccessfully reached XI.In SXMB_MONI it is showing error in request mapping.Error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please suggest me in this issue.
Thanks,
Bhuvan.

Check this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/bb/ad1c3d2b058c4ce10000000a114084/
You might want to refer to the SAP NOTE: 316877
Regards,
Ravi

Error in SOAP to file scenario

Hey guys
i m doing a SOAP to File scenario and getting the following error.
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
any idea where should i look ?
thanx
ahmad

Hey
i m still getting a red flag in MONI,the error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
i checked my mapping by copyin payload from MONI,its working fine.
thanx
ahmad

Error in Proxy to File scenario

Hello All,
I m doing Client Proxy, ABAP proxy to file scenario.
I hv done all the configurations in IR & ID.
I hv also created proxy in sender R3 system.
But messages are not going successfully from R3.
when i checkin SXMB_MONI of R3 i get following error
<SAP:Stack>Error when receiving by HTTP (error code: 110, error text: )</SAP:Stack>
Message is in SYSFAIL status in SMQ2.
Any clues how it can be solved??
Thanks in adv.
Mahi

Hi Maheshwari,
Please try as mentioned below
Option 1: Go to SXMB_ADM->Manage Queues and Deregister all the Queues.Use transaction SMQR or SMQ2 to reset the status of queues
For this to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1
Option 2: Check the user associated with the RFC destination AI_RUNTIME_JCOSERVER in sm59 transaction. It is generally SAPJSF. Might be posisble the user password is expired or locked. Log on to j2ee admin tool on the server side and update the password and then see if it works.
Thanks
Amit
Reward points if answer is helpful

Error on PROXY to FILE scenario

Hi,
I'm working on a Proxy to FIle Scenario. 1 Proxy is triggered and 7 files should be generated at the target side.
Now when the proxy is triggered all the 7 files doesn't get generated. Instead randomly some 3-4 files are getting generated.
Could not see the rest of the entries in MONI also.
Can someone tell how to monitor this and where exactly to check for the error, as message doesn't reach the MONI and we don't have a sender channel beacuse its Proxy.
Thanks,
Vikas

Vikas,
Can someone tell how to monitor this and where exactly to check for the error, as message doesn't reach the MONI and we don't have a sender channel beacuse its Proxy.
> how 7 files will generate ?
From Proxy level @ ECC it don't seems logical/possible as whole data will be passed as a whole to proxy interface and on some condition basis only you would be creating 7...files . so definitely at SXMB_MONI of XI you can see this .
Try to increase trace_level parameter to 3 (only in development box , as it will consume the server very fast) for better monitoring .
Since the no. of files will be created by file adapter only so those many no. of receiver file adapter calls you can see at RWB.
Regards,

CC error in RFC to File Scenario

Hi ,
While am trying to do end-to-end test for a RFC to file Scenario. Am getting this below error. Please help me to proceed further.
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '2008-08-13' too long (>8 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)'
Regards,
Hemanthika

Hi,
Please go through this Blog
RFC Scenario using BPM --Starter Kit
check this blog on how to configure sender rfc adapter.
The specified item was not found.
I hope it helps,
Regards,
Surya

AckRequestNotSupported error in IDoc to file scenario

Hi,
I have a scenario from IDoc to file adatper, when i try to run this scenario, every thing is ok except there is a error in message monitor.
This error is regarding the Acknowledgment("Acknowledgment not possible"), But the ALEAUD IDoc have been sent to the orignal sender (IDoc side) with the empty content except the Header segment such as sender name, receiver name etc.
And when i tracted the detail information in message monitor, i got the following error information.
*<SAP:Status>AckRequestNotSupported</SAP:Status>*
*<SAP:Category>permanent</SAP:Category>*
I also went through some weblog and artical, i didn't got the solution.
If some body also have this error?
thanks & Best regards
Rocky
Following is My acknowledgment error information: FYI
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Ack xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1" applicationAckNotSupported="true" applicationErrorAckNotSupported="true">
<SAP:Status>AckRequestNotSupported</SAP:Status>
<SAP:Category>permanent</SAP:Category>
</SAP:Ack>
Outbound Acknowledgment content:
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>030</SAP:MANDT>
<SAP:DOCREL>700</SAP:DOCREL>
<SAP:DOCNUM>0000000000036022</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>ALEAUD</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPO01</SAP:SNDPOR>
<SAP:SNDPRN>A01CLNT030</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPO05</SAP:RCVPOR>
<SAP:RCVPRN>A05CLNT231</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL />
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS>03</SAP:STATUS>
<SAP:OUTMOD />
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>0000-00-00</SAP:CREDAT>
<SAP:CRETIM>00:00:00</SAP:CRETIM>
<SAP:ARCKEY />
</SAP:IDocOutbound>

Hi Rocky,
Check the below links of setting up of ALEAUDUT RESPONSE:
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Check this document on handling IDOC acknowledgements. This might give you some idea.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Please check the above two links if u have missed anything in setting up the acknowledgement.Let me know if u need furthur information
Thanks,
Bhargav.
Note:Award points if found useful.

Mapping Error- In IDoc to File scenario

Hi Experts,
Got the Mapping error for one interface (IDoc to file). After comparing with successful message found that the field value (TDLINE) is not availbale in first segment (E1EDT10) in idoc for this failed one.
Mapping is :
TDLINE -- Exists --- Creatif --- Receiver field(in the file)
But here due to the the empty value in first segment the message is failed in XI system, next segment values is not trasmitted to the recever end(maping is the same above). To overcome this issue please suggest the suitable mapping design in IR.
Regards
Mahesh

Hi,
After your CreateIf, use a "IfWithoutElse" by selecting the properties "Keep SUPPRESS Values". To do that, do a right click on IfWithoutElse, choose "Properties".
With this option, you will keep the fact that you have nothing in the source, and so the target context will have a "SUPPRESS" line. I have not THE solution, so do your own test.
If it's not enough, see also about the "mapWithDefault" (but that depends of your real rule).
Regards.
Mickael

RFC error in idoc to file scenario in PI 7.0

Hi Experts,
I am getting a RFC error message like this below
:u201D RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_XI_SEND_MAIL in remote system (RfcClient[RFC_REJECTION_MAIL]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.u201D
Here Z_XI_SEND_MAIL is a customised function module which is calling some classes. This function module is responsible for sending emails to a group of people. This function module is working fine in acceptance server and development server but throwing exception in production. Thus the users are unable to receive emails. There has been no code changes in the function module. Idocs are being triggrred from sap r/3 system into XI, then being processed by a BPM, finally RFC (Z_XI_SEND_MAIL ) is being called to send email messages. SXMB_MONI is showing that the email message is being send to the RFC properly but communication channel is showing the above mentioned error.
Please suggest me what might be the reason of such errors?
Regards
Anupam

Hello,
Have you tested the production data in your acceptance system or development system for the interface?
Is it working fine??
It seems that the function module is generating exception, which could be due to data.
-Rahul

Pl find the error in ws to file scenario

all the information in IR and Id is given .
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>System Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context/>
 <code>RCVR_DETERMINATION.MESSAGE_INCOMPLETE</code>
 <text>Message is incomplete. No Sender found</text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>
</SOAP:Envelope>

>>Anything else I should look into
Look into the Reciever Determination object.
Check these details in SXMB_MONI
1. SenderService
2. Sender Interface
3. Sender Name space
There should be a mismatch between these details in SXMB_MONI and your Reciver Determination in ID.
Regards,
Jai Shankar

IDOC-XI-FILE Scenario: Error in ABAP Mapping

Dear All,
I am working on IDOC-XI-Flat FIle scenario in which I am using ABAP Mapping as per document "How To Convert an IDoc-XML
structure to a flat file and vice versa in XI 3.0".
I created one customized Idoc for this. The Idoc is reacing XI but its flat file is not getting created. Its giving me following error:
<SAP:Stack>Error in mapping program Z_ABAP_MAPPING_PACKING_LIST (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
I have also gone thru threads posted for the same topic earlier but still I am not been to resolve this error.
Please help me out in resolving this error.
Regards,
N.Jain

HI,
 Log saying that, u have problem in the mapping program.
i.e Z_ABAP_MAPPING_PACKING_LIST
 the problem is due declaration of data.
 i hope that, you have some methods.
 those are declared under intialization section in mapping program.
please use start of selection before the method.
other wise, it will come under intilization section.
warm regards
mahesh.

Error/Doubts in Idoc-XI-File scenario

Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.Jain

Hi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps .

Error in Ws to File Scenario

Similar Messages

Maybe you are looking for