How to suppress the Acknowledgement Error in IDOC to File scenario?

Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
Tirumal

Hi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy

Similar Messages

Alerts when the acknowledgement fails in IDOC to File Scenario

Hi All,
could you let me know how to handle Alerts for Idoc to File scenario.
My Scenario uses BPM as well.
Thanks,
Srini

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

Error in IDoc to file scenario

Hi Experts,
I am working on IDoc to File scenario.IDoc is sccessfully reached XI.In SXMB_MONI it is showing error in request mapping.Error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please suggest me in this issue.
Thanks,
Bhuvan.

Check this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/bb/ad1c3d2b058c4ce10000000a114084/
You might want to refer to the SAP NOTE: 316877
Regards,
Ravi

How to implement Exception Handling error in IDoc to File and RFC to File

Hi,
We are implementing the two below scenarios :
1. IDOC to File
2. RFC to File
We have to implement the Exception Handling for the above two cases. Kindly could you provide the inputs to implement the Exception Handling for the above two cases.
Please provide the precious inputs to implement this.
Thanks,
Ramesh

Hi Ramesh,
The exception handling for idocs
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f1543d711d1893e0000e8323c4f/frameset.htm
Exception handling in File to IDoc Scenario
For RFCs
Re: Passing SAP Exceptions to a sync SOAP Call
Error Handling when using RFC
Exception Handling while Calling RFC - BPM
handle exceptions in remote function modules
Regards,
Prateek

Mapping Error- In IDoc to File scenario

Hi Experts,
Got the Mapping error for one interface (IDoc to file). After comparing with successful message found that the field value (TDLINE) is not availbale in first segment (E1EDT10) in idoc for this failed one.
Mapping is :
TDLINE -- Exists --- Creatif --- Receiver field(in the file)
But here due to the the empty value in first segment the message is failed in XI system, next segment values is not trasmitted to the recever end(maping is the same above). To overcome this issue please suggest the suitable mapping design in IR.
Regards
Mahesh

Hi,
After your CreateIf, use a "IfWithoutElse" by selecting the properties "Keep SUPPRESS Values". To do that, do a right click on IfWithoutElse, choose "Properties".
With this option, you will keep the fact that you have nothing in the source, and so the target context will have a "SUPPRESS" line. I have not THE solution, so do your own test.
If it's not enough, see also about the "mapWithDefault" (but that depends of your real rule).
Regards.
Mickael

AckRequestNotSupported error in IDoc to file scenario

Hi,
I have a scenario from IDoc to file adatper, when i try to run this scenario, every thing is ok except there is a error in message monitor.
This error is regarding the Acknowledgment("Acknowledgment not possible"), But the ALEAUD IDoc have been sent to the orignal sender (IDoc side) with the empty content except the Header segment such as sender name, receiver name etc.
And when i tracted the detail information in message monitor, i got the following error information.
*<SAP:Status>AckRequestNotSupported</SAP:Status>*
*<SAP:Category>permanent</SAP:Category>*
I also went through some weblog and artical, i didn't got the solution.
If some body also have this error?
thanks & Best regards
Rocky
Following is My acknowledgment error information: FYI
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Ack xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1" applicationAckNotSupported="true" applicationErrorAckNotSupported="true">
<SAP:Status>AckRequestNotSupported</SAP:Status>
<SAP:Category>permanent</SAP:Category>
</SAP:Ack>
Outbound Acknowledgment content:
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>030</SAP:MANDT>
<SAP:DOCREL>700</SAP:DOCREL>
<SAP:DOCNUM>0000000000036022</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>ALEAUD</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPO01</SAP:SNDPOR>
<SAP:SNDPRN>A01CLNT030</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPO05</SAP:RCVPOR>
<SAP:RCVPRN>A05CLNT231</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL />
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS>03</SAP:STATUS>
<SAP:OUTMOD />
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>0000-00-00</SAP:CREDAT>
<SAP:CRETIM>00:00:00</SAP:CRETIM>
<SAP:ARCKEY />
</SAP:IDocOutbound>

Hi Rocky,
Check the below links of setting up of ALEAUDUT RESPONSE:
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Check this document on handling IDOC acknowledgements. This might give you some idea.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Please check the above two links if u have missed anything in setting up the acknowledgement.Let me know if u need furthur information
Thanks,
Bhargav.
Note:Award points if found useful.

Error in Idoc-XI-File scenario

dear all,
i am doing one Idoc to Xi and then to a flat file scenario. i have created one BS of type 3rd party for receiver and ont BS of type Web as ABAP. Then I created one namespace and import the Idoc type there. I have not created any DT, MT, MI, MM. I have created one interface Mapping where both sender & receiver has same structure & I have selected there mapping type of ABAP-Class with one Z program name.
Then, in ID, I created two CC channel one as receiver of File type & second sender as Idoc type.
Now, the thing is tht I am not able to get the file at the receiver end. Can anybody help me tht where I am doing an error?
Warm Rgards,
N.Jain

<i>Then, in ID, I created two CC channel one as receiver of File type & second sender as Idoc type. </i>
>>
you dont need a Sender IDoc channel to be configured.
<i>Now, the thing is tht I am not able to get the file at the receiver end. Can anybody help me tht where I am doing an error?</i>
>>>
1. what does it say in SXMB_MONI ? Has the IDoc come into XI ?
2. In communication channel monitoring what is the error for the recv. file adapter

RFC error in idoc to file scenario in PI 7.0

Hi Experts,
I am getting a RFC error message like this below
:u201D RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_XI_SEND_MAIL in remote system (RfcClient[RFC_REJECTION_MAIL]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.u201D
Here Z_XI_SEND_MAIL is a customised function module which is calling some classes. This function module is responsible for sending emails to a group of people. This function module is working fine in acceptance server and development server but throwing exception in production. Thus the users are unable to receive emails. There has been no code changes in the function module. Idocs are being triggrred from sap r/3 system into XI, then being processed by a BPM, finally RFC (Z_XI_SEND_MAIL ) is being called to send email messages. SXMB_MONI is showing that the email message is being send to the RFC properly but communication channel is showing the above mentioned error.
Please suggest me what might be the reason of such errors?
Regards
Anupam

Hello,
Have you tested the production data in your acceptance system or development system for the interface?
Is it working fine??
It seems that the function module is generating exception, which could be due to data.
-Rahul

How to send 100 records from an IDOC to File Scenario without using BPM?

Hi All,
I have a requirement that i need to send 100 records from sap to file by using the scenario IDOC to File. Can you suggest how can i achieve this?
Regards,
Ramvilas.

Hi,
Create a H type RFC destination.Tagert host and port give Xi system host and port.Path give the
/sap/xi/adapter_plain?namespace=<NameSpcae>&interface=<Interface> &service=<SenderBusinessSystem>&qos=EO or EOIO.
Go to we21 find xmlhttp port.give the port name and assign RFC.Give the port in we20 your idoc and change to collective.
In Xi export the IDOC and change the occurance to 0-unbounded and import it.
Regards,
Prakasu.M

Test IDOC to File scenario

Hey guys
i m doing a IDOC to File scenario and am stuck at testing it.i went in we19 but dont know how should i test my scenario there.
any idea how should i test my scenario
thanx
ahmad

Hi Ahmad,
IDOC to File
R3 system.
1. Create SM 59 RFC destination to XI,.
2. We21 - Create port to XI.
3. We 20 -- Maintain Partner Profile for the outbound Idoc.
XI SLD
1. Create technical system for R3 system
2. Create Business System for the Client of the R3 system.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
These are the required steps for IDoc to File scenario...
In R3 (i.e., your IDES system)...
RFC dest to XI (sm59) - any name
Logical system (bd54) - any name
Port to XI (we21) - any name
Partner profile for the logical system (we20) - use Logical system name created in bd54
In XI...
RFC dest to R3 (sm59) -
Port to R3 (idx1) -
create metadata for the idoc (idx2)
In sld...
create business system for R3 with Logical system name as r3 sys.
In we19
and give in control record as
Sender : Port ; Partner
Receiver : Port = <Port created in WE21> ; Partner = <Partner created in we20>
Regards..
Ramesh.

Xi idoc to file scenario step by step

can any body send me the steps involved in idoc to file scenario.
Thanks

Please search SDN before posting generic queries...use this forum to get solutions for specific queries/ issues
Do read this before posting: /thread/117188 [original link is broken]
Regards,
Abhishek.

How to update the status of Outbound IDOC in case of error

I want to know about how to update the status of Outbound IDOC in case of error.
I am using message control functionality here.

HI,
If u r using the standard message and basic type
u can do it in the FM attached to the basic and message type.There u need to write ur own message instead of standard SAP message..chek if there r any userexits available in the FM..where u can overwrite ur own message ..
If u r using the Zmessage and Zbasic type
then u need to declare an internal table of EDIDS structure and then append ur message to the internal table..
idoc_status-docnum   = idoc_contrl-docnum.
idoc_status-msgty    = <message type>
idoc_status-msgid    = message-id.
idoc_status-msgno    = message-number.
idoc_status-msgv1    = message-message_v1.
idoc_status-repid    = sy-repid.
idoc_status-status   = <give the error status>.
APPEND idoc_status.
Reward if u find useful
Regards,
Nagaraj

How to suppress the Warning messages while doing GR(MIGO)

Hi ALL,
I have a requirement while posting goods GR/GI using T-code MIGO.
Trying to do GR against PO using MIGO.After selecting the line item quantity and entering BATCH Number for line item Material when I click on 'CHECK' Pushbutton i am Getting the below Warning msg
'For batch RAB001 of material 1522582, no class could be determined'. Message no M7207.
How to suppress this above warning message, I want to Post the goods by suppressing the above warning message .
Like similarly while issuing the goods to the to the Production order using MIGO i am getting warning message when I click on 'CHECK' Pushbutton.
I do want to issue the goods by suppressing warning message in this case also.
I know this could be solved by customization but we are dealing with batch managed materials.
How to suppress the the above warning messages in MIGO through ABAP coding ...
Looking forward the helpfull answer.
Regards,
venky

Hi
Answer is pure assumption.
Pls check the following OSS notes
Note 319094 - Warning message during batch classification in IM
Note 122937 - UD: Error message M7207 when you save
Note 399416 - Message M7207 not analyzed in background
Note 786755 - You cannot suppress message M7 207
Note 201196 - MIGO: Error M7207 for goods receipt for batch
Pls take opinion from SAP / Basis before implementing the OSS note
Regards
Madhan D

How to suppress system generated error message in message box

HI OAF Guys
combination of headerId and role id constitutes the primary key in my applicaiton. I am setting header id in create method of the EO.java file. when i click on add another row, it creates a table row and displays with the list of values in drop down list. when i selected the role that is selected already, and click on save the OA framework showing the error like this.
Row 2 ApproverName - Attribute Role in TermsDeviationsAM.BsaMainRN510_BsaMainRN_com_equinix_oracle_apps_okc_terms_deviations_server_EqxBsaApproversAM.EqxOMBSAApproversVO1 is required
I tried to suppress this error by handling at EO.java file in setRole() by throwing OAAttrValException with message. but I could not suppress the previous error message. Now it is displaying the user message along with the first one.
i want suppress the previous error message. How can i achive that.
Thanks in advance
Thanks & Regards
U.palakondaiah.

Try this example code:
PARAMETERS: p_text(10) TYPE c.
PARAMETERS: p_check TYPE c AS CHECKBOX.
AT SELECTION-SCREEN.
IF p_check EQ 'X'.
    IF p_text IS INITIAL.
      MESSAGE 'Text field is mandatory' TYPE 'E'.
    ENDIF.
ENDIF.
START-OF-SELECTION.
WRITE: / 'OK!'.

How to check the SQL error message to address the application issue

Dears,
The application runs SQLs against Oracle via oracle client(actually the app is IBM Cognos which shows report and the data is from oracle database). So, for a report which fails to run, I want to check the sql and the error message for this failed sql statement. Where is the message stored, client or server and How to get it?
I know there is a view v$log used to check the sqls ran in database but here I mean the failed sqls....
Thanks,
Ricky Ru

969543 wrote:
The application only presents the application error message.. And it is not helpful for me to get the root cause..The application uses the Oracle Call Interface to communicate with the database server. OCI calls return a result code to the client. The client is expected to call OCIErrorGet() to get the full error text.
If the client does not do this, or obfuscate the server error, or suppress the server error? Crappy client. The lack of the client to play its role as client, correctly within the documented client-server architecture, is solely the client's problem. Not the server.
For DB2, I could use db2diag to check the log. why oracle can not do this? any thoughts?Because Oracle is not stupid? Why on sweet mother earth waste server resources to track client application errors, on behalf of clients? How does this make ANY sense!?
Oracle server's handles 1000's of SQL executions per second. Just where is it to find sufficient space to log application errors (not database system errors) at that rate? How do you justify that overhead? Using the argument that the application is poorly designed or written? Come on!

How to suppress the Acknowledgement Error in IDOC to File scenario?

Similar Messages

Maybe you are looking for