Error in XSLT Mapping when special character is passed through

Hi Experts,
We have used the XSLT mapping. When ever any special character like é is being passed, then the below mentioned error is displayed in the Integration engine.
Error occurred during XSLT mapping of the application
It is working fine with normal case if we are not sending any special character.
I am not sure whether the problem exists in XSLT mapping or the issue with the legacy system?
Early response would be highly appreciated and points will be awarded.
Thanks in Advance,
Jitender

hi,
[Problem in transforming XML to string using XSLT;
Chk the above link.might solve ur issue.
Regards.
Siddhesh Naik

Similar Messages

Error while releasing transport request - Special character "_" in generic

Hi all,
we're receiving the error Special character "_" in generic key when releasing a best practice transport.
Note 1304725 describes my error, but the solution cannot be implemented. The reason for this is that we do not have an individual entry for eacht yb_PS,..,
but we have only one entry where field BWERT has a wildcard '*' as entry.
Does anyone has some idea how to solve this ?
kind regards !

Hello Bjorn,
How did you get this solved?
I'm having nearly the same issue:
A custom-table with a total key lenght of about 365 characters. As soon as I enter a special character (_) in the key field just before the position 120, the message tk287 rejects the entry. Entering the special character in a key field at about key position
60, there's no message rejecting the entry.
Regards

Error: Invalid dimension member with special character / in BPC NW 7.5 SP7

Hi experts,
We are encountering the following problem in our Financial Planning application.
We are migrating our existing BPC solution from one server to another through backup and restore. The existing solution was on BPC NW 7.5 SP 5. The profit_centre dimension in the existing solutions has several member ids with special character '/' (forward slash). The dimension never threw an error when processed in the existing solution and there is planning transactional data against these member ids.
While the entire configration , appset , files were successfully restored through UJBR on the new system (BPC 7.5 SP7) through UJBR (backup and restore), the masterdata could not be restored only for this Profit_centre (masterdata for other dimensions were processed successfullu). All the member ids with / are rejected for this dimension. The same error is thrown if processed through the admin client from the member sheet.
Error: Dimension member PC_FF/WS/NT is an invalid member ID
Error in Admin module
Is there any setting which need to be made to allow / character in member ids? Any suggestion to get around this problem would be much appreciated.
Thanks
Abhiman

Hi Abhiman,
Yes, you need to maintain the transformation file to correct all dimension member IDs. Can you please refer to the following link with a similar issue:
conversion file formula not working
Hope this helps.
Rgds,
Poonam

Error using XSLT mapping

Hi,
I am using an XSLT mapping during the response processing for a sync interface.
I have performed the following steps:
1. Created Translation.xsl and added to a .zip archive
2. Imported the archive file into the same namespace as the interface mapping
3. Added the mapping program for type XSL using the imported archive on the response in the interface mapping
4. Activated everything
However, when I receive a response, I get the following error:
Search Translation.xsl (urn:com.xerox.esap.crm.deviceregistration, -1) in swcv f1570070-52e9-11db-c6b4-d3c10ddf0074.</Trace>
<Trace level="3" type="T">Does not found exact entry. Search in other namspaces.</Trace>
<Trace level="3" type="T">Search Translation.xsl (-1) in swcv f1570070-52e9-11db-c6b4-d3c10ddf0074 without namespace.</Trace>
<Trace level="1" type="T">Unable to find resource Translation.xsl (urn:com.xerox.esap.crm.deviceregistration, f1570070-52e9-11db-c6b4-d3c10ddf0074, -1)</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.persist.ResourceNotFoundException: Unable to find resource Translation.xsl
However, I can see the imported archive with my very own eyes so not sure why this error is being thrown.
Any ideas ?
Kind regards
Colin.

Colin,
First test your mapping is working fine or not in interfaace mapping. Just referesh your caches as mentioned in this document. This should resolve your issue:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
---Satish

Error in XSLT mapping while using string functions

Hi All,
While using tokenize() and substring-before() functions in XSLT mapping,we are getting an error.The error message is Unexpected symbol "" So while using string functions in XSLT mapping do we have to use any header functions.
Please through light on syntax etc.,of string functions in XSLT.
Thanx in advance,
Lokesh Dhulipudi
Edited by: LOKESH DHULIPUDI on Dec 27, 2007 7:32 AM

Hi,
Hope you have gone thru this help:
http://w3schools.com/xsl/default.asp
Rgds, Moorthy

Exception caught when special character sent to lookup

Hi Experts,
When I sent a special character in the name field via "Address-Look-up (Java-Look-up)" an exception caught - (The exception is not visible - so used a value which get populated to all the target field where the loop-up is used). Receiver URL correctly maintained for the look-up channel.
please suggest how to resolve this special character issue.
regards
Pankaj Rajak

Pankaj,
Can you explain your end to end scenario so that we identify where the problem is ?
Also, this sometimes happens when the one of the two systems which are communicating are not Unicode Compliant. Please check if this is the issue is due to this.
Regards,
Amit

Error in interface mapping when calling a xsl file

Hi,
Using XSLT I am calling another XSL file into my main xsl file.I have added both the zip files into a single zip file and imported in my imported archive.But when i do the interface mapping testing i get an error 'Transformer configuration exception occurred when loading XSLT xslt1.xsl'.
What should i do?

Dear Sidhvin,
First test your XSLT in the editor (for example STYLUS STUDIO). In Editor run your mapping and have a look whether you are getting the required result.
if you are getting the required result of XSLT then use it in the scenario and after importing this activate it and then run the interface.
hope this time you will not get any error
Thanks
Sandeep
PS: if helpful Reward points

Get user name - web services throws error if a name has special character

I am calling UserProfileService.asmx web service and using GetUserPropertyByAccountName. The method works for almost everyone except for those who has special characters in the Preferred Name. How do I fix this? We are having serious production issues and
would like to know how to fix the issue.
User: domain\aberg returns name as the name does not have any special characters. Arthur Berg
User: domain\jobill returns following error because this use has a dash in the last name. Joe O-Bill
User: domain\mobrien returns following error because this use has a dash in the last name. Mark O'Brien
<?xml version="1.0" encoding="utf-16"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>A user with the account name DOMAIN\jobill could not be found. ---> An error was encountered while retrieving the user profile.</faultstring>
<detail>
<ErrorCode xmlns="http://microsoft.com/webservices/SharePointPortalServer/UserProfileService">UserCannotBeFound</ErrorCode>
<ErrorMessage xmlns="http://microsoft.com/webservices/SharePointPortalServer/UserProfileService">An error was encountered while retrieving the user profile.</ErrorMessage>
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
I am using codeplex tool "web service studio 2.0" to verify this.

I have NO clue what is going on. When I go to user profile from Central Admin the user account is domainxp.net\username. But when I pull up the user using address bar (say in edit form) I see domain\usename. Could this be confusing the workflow which is
calling the web services?
I ran the following powershell and after few minutes it starting to resolve the user name without any errors. I like to know what is going on here. Problem is solved for now but I wont be surprise if I see the same problem after doing a Full AD sync.
$adUser = "domain\user"
$siteCollection = "http://local.site/sales"
Set-SPUser -Identity $adUser -Web $siteCollection -SyncFromAD
Thanks
Brooke

Error opening KM file with special character

I'm using the following code to get the url to an file stored in KM, but when some file has the ( or )character in the name, an error occurs saying that the file doesn't exist in KM. The file name look like this (CDU001-C010) Delegar WorkFlow.doc.gif.
IUriReference uriRef;
IURLGeneratorService ugs;
ugs = (IURLGeneratorService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.URLGENERATOR_SERVICE);
uriRef = ugs.getRelativeUri(PathKey.CONTENT_ACCESS_PATH).appendPath(resource.getRID().toExternalForm());
retorno = uriRef.toExternalForm();
thanks.

231

Error opeing KM file with special character

I'm using the following code to get the url to an file stored in KM, but when some file has the [[ or ]]character in the name, an error occurs saying that the file doesn't exist in KM. The file name look like this [[CDU001-C010]] Delegar WorkFlow.doc.gif.
IUriReference uriRef;
IURLGeneratorService ugs;
ugs = (IURLGeneratorService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.URLGENERATOR_SERVICE);
uriRef = ugs.getRelativeUri(PathKey.CONTENT_ACCESS_PATH).appendPath(resource.getRID().toExternalForm());
retorno = uriRef.toExternalForm();
thanks.
Edited by: fabio saito on May 18, 2009 6:31 PM
Edited by: fabio saito on May 18, 2009 6:32 PM
Edited by: fabio saito on May 18, 2009 6:32 PM

231

Error with XSLT mapping .. code included

I am using XSLT to map my input legacy message into the CATS_INSERT02 IDoc. I am getting a wierd error ....
=====================================================
<Trace level="1" type="T">TransfromerException during XSLT processing:</Trace>
<Trace level="1" type="T">javax.xml.transform.TransformerException: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:245) at com.sap.aii.ibrun.server.mapping.MappingTransformer.transform(MappingTransformer.java:153) at com.sap.aii.ibrun.server.mapping.XSLTMapping.executeStep(XSLTMapping.java:67) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor20721.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy26.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Caused by: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8) at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:1988) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2632) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2688) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:341) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:234) ... 24 more -
com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8) at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:1988) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2632) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2688) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:341) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:234) at
I am able to test the transform fine in XMLSpy. Any ideas will be really appreciated.
=====================================================
XSL code:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
     <xsl:attribute-set name="idoc_begin">
          <xsl:attribute name="BEGIN">catsdb_test</xsl:attribute>
     </xsl:attribute-set>
     <xsl:attribute-set name="EDIDC">
          <xsl:attribute name="SEGMENT">EDI_DC40</xsl:attribute>
     </xsl:attribute-set>
     <xsl:attribute-set name="E1CATS_INSERT">
          <xsl:attribute name="SEGMENT">E1CATS_INSERT</xsl:attribute>
     </xsl:attribute-set>
     <xsl:attribute-set name="E1BPCATS1">
          <xsl:attribute name="SEGMENT">E1BPCATS1</xsl:attribute>
     </xsl:attribute-set>
     
     <xsl:key name="employees-by-ssn" match="EMPDETL" use="ssn"/>
     <xsl:template match="EMPDET">
          
          <xsl:element name="CATS_INSERT02">
               
               
               <xsl:for-each select="EMPDETL[count(. | key('employees-by-ssn', ssn)[1]) = 1]">
                    
                    <xsl:sort data-type="text" select="ssn"/>
                    
                    <xsl:element name="IDOC" use-attribute-sets="idoc_begin">
                         <xsl:element name="EDI_DC40" use-attribute-sets="EDIDC">
                              <xsl:element name="TABNAM">EDIDC</xsl:element>
                              <xsl:element name="DIRECT">2</xsl:element>
                              <xsl:element name="IDOCTYP">cats_insert02</xsl:element>
                              <xsl:element name="MESTYP">cats_insert</xsl:element>
                              <xsl:element name="SNDPOR">T90CLNT090</xsl:element>
                              <xsl:element name="SNDPRT">LS</xsl:element>
                              <xsl:element name="SNDPRN">T90CLNT090</xsl:element>
                              <xsl:element name="RCVPOR">SAPBAS</xsl:element>
                              <xsl:element name="RCVPRN">ERPCLT800</xsl:element>
                         </xsl:element>
                         
                         <xsl:element name="E1CATS_INSERT" use-attribute-sets="E1CATS_INSERT">
                              <xsl:for-each select="key('employees-by-ssn', ssn)">
                                   
                                   <xsl:element name="E1BPCATS1" use-attribute-sets="E1BPCATS1">
                                        <xsl:element name="WORKDATE">xsl:value-of select="workdate"</xsl:element>
                                        <xsl:element name="EMPLOYEENUMBER">xsl:value-of select="ssn"</xsl:element>
                                        <xsl:element name="ABS_ATT_TYPE">xsl:value-of select="abstype"</xsl:element>
                                        <xsl:element name="WAGETYPE">xsl:value-of select="wagetype"</xsl:element>
                                        <xsl:element name="CATSHOURS">xsl:value-of select="catshours"</xsl:element>
                                   </xsl:element>
                                   
                              </xsl:for-each>
                              
                         </xsl:element>
                         
                    </xsl:element>
                    
               </xsl:for-each>
               
          </xsl:element>
     </xsl:template>
</xsl:stylesheet>

what is correlation here?
I have three messages coming into BPM....now all the three messages should have a field (any field) whose value will be the same in all the messages.
Ex:
<Message1>
<Name>SAP</Name>
<ID>40</ID>
</Message1>
<Message2>
<Name>SDN</Name>
<ID>40</ID>
</Message2>
<Message3>
<Name>FORUM</Name>
<ID>40</ID>
</Message3>
Now to correlate the above messages, the field ID would be used as it has the same value in all the messages.
How does message mapping looks for the following messages
In your BPM you will have a Transformation step....the mapping included here will have three source messages (File1, File2, File3) and there will be a single target message which will have the below structure:
<ROOT>
<OUTPUT> ...... 0..unbounded
</ROOT>
OUTPUT node of the target should be duplicated (right-click --> duplicate ... in message mapping).....do it twice so that you will have three OUTPUT nodes.
Now each target-OUTPUT node should be mapped to the source OUTPUT node, respectively.
Regards,
Abhishek.

Seeburger BIC Mapping Designer: Special Character (German Umlaut) Problem

Hi,
i have created a Mapping with Seeburger Mapping Designer (Invoicd96a to XML). I started the test environment, compiled the mapping and converted the Message to XML. I got a syntax error in the destination file so i added the setSourceEncoding("UTF-8") option and i got a working xml file.
My problem is that all special characters, will be displayed as ? So the word "Beträge" will be converted to "Betr?ge".
What i have to di, to fix this problem ?
Thanks in advance
Matthias

hi,
i have to create an Edifact to XML Mapping with the BIC Mapping Designer. After creation i can deploy this mapping to SAP XI and calling it by using it as module in the specified adapter.
My idea is that the mapping should working correct in test enviroment before i deploy to SAP PI.
Perhaps anyone has an idea.
regards
Matthias
P.S.: A few month ago i had a similar problem with the conversion agent and it was just a "secret" checkbox

Error in XSLT mapping TEST in the Integration Repository?

Hi,
I try to use imported .xsl file for mapping. I have configured the interface mapping using this .xsl file for transformation. But when I try to test the transformation in the TEST (bookmark), it returns as the result the same .xsl - the stylesheet!
Is it a bug?
Thanx, Peter

What more, it doesn't work so only in the test... I used this transformation in the BPM process and it has produced the stylesheet as the result of the transformation... It doesn't seem as a bug...
What is wrong?
...one more thing: detailed log of the transformation in the TEST shows NO WARNING!

I keep getting error -50 on itunes when i try to login through my apple id. I am able to access itunes store but it does not allows me to sign into my id

When i try to login with my apple id i keep on getting error saying "We could not complete your itunes store request. An unknown error occured(-50)." I get this error everytime i try logging into my account. But still i can access to the iTunes store. I had recently downloaded this iTunes software into my new windows 8.1 laptop so i think it is up to date. I have earlier used this apple ID into another iTunes conneted to my older PC(I haven't logged out from it yet.Could that be the problem?).

Ok.
Seems this is a well known problem.
https://discussions.apple.com/thread/3574459?start=0&tstart=0
Killing the APSDaemon.exe works for me!

Java Mapping, XSLT Mapping, ABAP Mapping

Hi Experts,
Could any one explain what is the main features of the following Mapping. How to pick the mapping?
Java Mapping - When to use and what is the advantage.
ABAP Mapping - When to use and what is the advantage.
XSLT Mapping - When to use and what is the advantage.
Graphical Mapping - When to use and what is the advantage.
cheers,
Sunee

There are 4 types of mapping in XI
1. Graphical Mapping
2. XSLT Mapping
3. JAVA Mapping
4. ABAP Mapping
When to use Message mapping
1 When the logic for your mapping is simple and straight forward, you can use
Advantages of message mapping
1)Easy to use.
2) has GUI drag and drop.
3) used for simple mapping cases
4) it does not involve any complex logic
Disadvantages of message mapping
1)has limitation in terms of complex hierarchy
When to use Java mapping
1) Java mapping are used when graphical mapping cannot help you.
Advantages of Java Mapping
1)you can use Java APIs and Classes in it.
2) file look up or a DB lookup is possible
3) DOM is easier to use with lots of classes to help you create nodes and elements.
Disadvantages of Java mapping
1)SAX parser is not easy to develop
2)DOM parser is intensive
3) Java knowledge is required
4) bit complexer
XSLT Mapping - When to use
1)When the required output is other than XML like Text, Html or XHTML (html displayed as XML )
2)When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
3)When data is to be filtered based on certain fields (considering File as source)
4)When data is to be sorted based on certain field (considering File as source)
5)When data is to be grouped based on certain field (considering File as source)
Advantages of using XSLT mapping
1)XSLT program itself defines its own target structure.
2)XSLT programs can be imported into SAP XI. Message mapping step can be avoided. One can directly go for interface mapping once message interfaces are created and mapping is imported.
3)XSLT provides use of number of standard XPath functions that can replaces graphical mapping involving user defined java functions easily.
4)File content conversion at receiver side can be avoided in case of text or html output.
5)Multiple occurrences of node within tree (source XML) can be handled easily.
6)XSLT can be used in combination with graphical mapping.
7)Multi-mapping is also possible using xslt.
8)XSLT can be used with ABAP and JAVA Extensions
Disadvantages of using XSLT mapping
1)Resultant XML payload can not be viewed in SXMB_MONI if not in XML format (for service packs < SP14).
2)Interface mapping testing does not show proper error description. So errors in XSLT programs are difficult to trace in XI but can be easily identified outside XI using browser.
3)XSLT mapping requires more memory than mapping classes generated in Java.
4)XSLT program become lengthier as source structure fields grows in numbers.
5)XSLT program sometimes become complex to meet desired functionality.
6)Some XSL functions are dependent on version of browser.
Advantages of Abap Mapping
1) A person comfortable with OOABAP can go for ABAP mapping instead.
Disadvantages of Abap Mapping
1) Abap knowledge is required
2) bit compexer
For further info on each of the mapping, refer to these links,
Graphical Mapping,
http://help.sap.com/saphelp_nw04/helpdata/en/6d/aadd3e6ecb1f39e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm
XSLT Mapping
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
http://www.w3.org/TR/xslt20/
Java Mapping
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
DOM parser API
http://java.sun.com/j2se/1.4.2/docs/api/org/w3c/dom/package-frame.html
Check this blog on Mapping:
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
Also, check this thread for more info,
Different types of Mapping in XI

Error in XSLT Mapping when special character is passed through

Similar Messages

Maybe you are looking for