Error : Input Definition 'Ground WIP' does not have a % Step set.

Input Definition 'Ground WIP' does not have a % Step set.
Why are we getting this error when the % Step has a percentage set? It will not allow us to save the spec.
Material
Qty
Material G/L
Moisture G/L
Solids G/L
Yld
% Step
EXT Cost
Ground WIP
Internal
1.00
1000.00
100.00
1000.00000 lb 1.00000 1.00000 1.00000 1000.00000 lb 100.00 --
Total
1000.00000 lb
1000.00000 lb

the user copied a formulation spec and entered a wip , then tried to save. it's like it wasn't recognizing the 100%. We didn't change tabs and try that, they endedup writing a new spec to get around it. We are not modifying and inputs programatically.
Another issue we saw this morning:
1, create a marinade in step 1
2 consume an FO in step 2
3 click consume from step - receive unhandled error
we found that if we put a percentage in on the FO un step 2 before clicking consume from step , it works fine. Can you guys cast a warning or error message instead of the unhandled?
thanks,
David
The description for Event ID '0' in Source 'Prodika' cannot be found. The local computer may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'ErrorType: First| ErrorCount: 0| App: GSM| SessionId: 800f067b-7860-6de0-517f-ac4ac13c0f69| UserId: johnsong| IsNewSession: False| ServerID: 10.31.11.20| Misc: Spec 5329214-001 ; Uncooked ; EditMode| Exception: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Xeno.Prodika.GSMLib.BOMCalc.BomCalcNormalizeException: All inputs have a % Step of 0.0. at Xeno.Prodika.GSMLib.BOMCalc.Utils.InputsCalculationValidationsHelper.ValidateInputWithNonZeroPercentStepExists(IEnumerable`1 inputs, IList`1 errors) at Xeno.Prodika.GSMLib.BOMCalc.InputsCalcMethods.FixedStepPercentage.FixedStepPercentageInputsCalcMethod.Validate() at Xeno.Prodika.GSMLib.BOMCalc.InputsCalcMethods.FixedStepPercentage.FixedStepPercentageInputsCalcMethod.CalculateInputs() at Xeno.Prodika.GSMLib.BOMCalc.StepCalcMethods.InputDrivenStepCalcMethod.CalculateStep() at Xeno.Prodika.GSMLib.BOMCalc.BomCalcStepTreeCalculatorBase.CalculateStep(IFormulationStep step, IStepCalcMethodFactory calcMethodFactory) at Xeno.Prodika.GSMLib.BOMCalc.BomCalcStepTreeCalculator.CalculateStepAndRelatedSteps(IFormulationStep step, IStepCalcMethodFactory calcMethodFactory) at Xeno.Prodika.GSMLib.BOMCalc.BaseBomCalcCalculator.Calculate(IFormulationStep initialStep, List`1 calculatedSteps, GetCalculator getCalculator) at Xeno.Prodika.GSMLib.BOMCalc.BaseBomCalcCalculator.Calculate(IFormulationStepAdminable initialStep) at Xeno.Web.UI.GSMExtensions.BomCalc.BomCalcEvents.Calculate(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.BomCalc.FixedInputBomCalcEvents.Calculate(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.BomCalc.FixedPercentBomCalcEvents.Calculate(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.BomCalc.EditModeOnlyBomCalcEventsDecorator.OpenConsumeFromStepOutput(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.Formulation.Steps.FormulationUIEvents.OpenConsumeFromStepOutput(IFormulationStep step) at Xeno.Web.UI.GSMExtensions.Formulation.Steps.ctlInput.btnConsumeFromStep_OnClick(Object sender, EventArgs e) at System.Web.UI.HtmlControls.HtmlInputButton.OnServerClick(EventArgs e) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) --- End of inner exception stack trace --- at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.baseforms_frmformulation_aspx.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)'

Similar Messages

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...." How do I fix this?

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)

Dear,
i 've got this error when i tried to upload my book using iTunes Producer and i don't know how to solve it
if any one know the solving please inform me
ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)

Hello ModernGuide
For specific issues with uploading your book and dealing currency, you will want to contact Apple Directly and the article below will have contact information for phone support or support through email.
Authors & Book Publishers: Frequently Asked Questions
http://www.apple.com/itunes/content-providers/book-faq.html
Apple provides support to iBooks Store authors and publishers via email and phone:
Send an email to [email protected]
If you have an Apple ID enabled for iTunes Connect, you can contact the iBooks Publisher Support team by phone, Monday through Friday from 7 a.m. to 5 p.m. (PT). Local phone support is available in English in the countries listed below
Austria, Australia, Denmark, France, Germany, Italy, Netherlands, Norway, Spain, Sweden, U.K., U.S.
Regards,
-Norm G.

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". Please help!!!

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!

Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app.

Error: Error #2029: This URLStream object does not have a stream opened

Hi there,
I am working on sound.
Error: Error #2029: This URLStream object does not have a stream opened.
Error occured during the sound.close()
Anyone Knows kindly reply,
Thanks in advance,
Saransoft

If you think that this error is 'normal' use this
try
sound.close()
catch( exc )
//Do nothing

Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

STOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download

Saved keynote document could not be read. Error message says The document does not have a valid format.

Using Keynote '09 on an iMac OS 10.8.4. Two of my students saved a Keynote file then the next day when trying to open received an error message- The document "4b Molly.key" could not be read. The document does not have a valid format. The students are saving correctly. Any ideas how we can retrieve a working file? Why did this happen?

Just tagging on as I encounted this problem this morning. I'm using Mavericks, on MBP (late 2013).
Have both Keynote 5 and 6 - tried to open the file in both, to no avail. I have also tried the renaming of .key to .zip that seemed to work for others with previous OS, but does not fix now. Also tried uploading to iCloud, renaming, redownloading - no fix there either. I've tried to open on iPad and on a different user's iMac - again, get the same error.
It worked yesterday and the day before. It is a large file; however, I realized that from last night to this morning the only different thing I did was that I inserted photos in the keynote deck by drag & drop verses Insert/Choose and wondering if this corrupted the file.
I'm going to hope a fix is out there somewhere and that I don't have to spend hours upon days upon weeks redoing this 98+ page deck.
Any suggestions?

Getting error ORA-20001: This person does not have preferences for the sele

*) I got user_id by following query
SELECT USER_ID, USER_NAME, FND_USER.*
from FND_USER where user_name = '205174';
*) resource_id by following query:
select * from APPS.PA_PROJECT_ASSIGNMENTS where RESOURCE_ID in (select RESOURCE_ID from APPS.PA_RESOURCES_DENORM where PERSON_ID
in (select PERSON_ID from APPS.PER_ALL_PEOPLE_F where EMPLOYEE_NUMBER= 205173) ) ;
*) person_id by following query:
select * from APPS.PA_RESOURCES_DENORM where PERSON_ID in (select PERSON_ID from APPS.PER_ALL_PEOPLE_F where EMPLOYEE_NUMBER= 205173) ;
and
Hi,
When I am running following query to submit timesheet, getting following warning msg
anonymous block completed
ORA-20001: This person does not have preferences for the selected effective date
Following is query
set serveroutput on size 1000000
DECLARE
l_tbl_messages hxc_message_table_type;
l_message fnd_new_messages.message_text%type;
i pls_integer;
l_app_blocks hxc_block_table_type := hxc_block_table_type();
l_app_attributes hxc_self_service_time_deposit.app_attributes_info;
l_time_building_block_id number;
l_new_timecard_id number;
l_new_timecard_ovn number;
l_bb_id number;
l_resource_id hxc_time_building_blocks.resource_id%TYPE := 3595; -- XPCPAY
l_start_time hxc_time_building_blocks.start_time%TYPE := fnd_date.canonical_to_date('2011/10/17 00:00:00');
l_measure hxc_time_building_blocks.measure%TYPE := 1;
l_element_type_id varchar2(80) := 'ELEMENT - 50809'; -- Jury Duty
l_comment_text hxc_time_building_blocks.comment_text%TYPE := '';
l_deposit_process hxc_deposit_processes.NAME%TYPE := 'OTL Deposit Process';
l_retrieval_process varchar2(250) := 'BEE Retrieval Process';
BEGIN
fnd_global.apps_initialize ( user_id => 3850 -- XPCPAY
, resp_id => 3595 -- Self Service Time
, resp_appl_id => 809 -- HXC
hxc_timestore_deposit.create_time_entry ( p_measure => l_measure
, p_day => l_start_time
, p_resource_id => l_resource_id
, p_resource_type => 'PERSON'
, p_comment_text => l_comment_text
, p_deposit_process => l_deposit_process
, p_app_blocks => l_app_blocks
, p_app_attributes => l_app_attributes
, p_time_building_block_id => l_bb_id
hxc_timestore_deposit.create_attribute ( p_building_block_id => l_bb_id
, p_attribute_name => 'Dummy Element Context'
, p_attribute_value => l_element_type_id
, p_deposit_process => l_deposit_process
, p_app_attributes => l_app_attributes
hxc_timestore_deposit.execute_deposit_process ( p_validate => TRUE
, p_app_blocks => l_app_blocks
, p_app_attributes => l_app_attributes
, p_messages => l_tbl_messages
, p_mode => 'SUBMIT'
, p_deposit_process => l_deposit_process
, p_retrieval_process => l_retrieval_process
, p_timecard_id => l_new_timecard_id
, p_timecard_ovn => l_new_timecard_ovn
-- OUTPUT MESSAGES --
DBMS_OUTPUT.put_line ('l_new_timecard_id = ' || l_new_timecard_id);
DBMS_OUTPUT.put_line ('l_new_timecard_ovn = ' || l_new_timecard_ovn);
if (l_tbl_messages.COUNT <> 0) THEN
i := l_tbl_messages.FIRST;
LOOP
EXIT WHEN (NOT l_tbl_messages.EXISTS(i));
l_message := fnd_message.get_string ( appin => l_tbl_messages(i).application_short_name
, namein => l_tbl_messages(i).message_name
DBMS_OUTPUT.put_line (l_tbl_messages(i).message_name);
DBMS_OUTPUT.put_line (l_message);
i := l_tbl_messages.NEXT(i);
END LOOP;
rollback;
else
commit;
end if;
exception
when others then
DBMS_OUTPUT.put_line(SQLERRM);
END;
/

Please check the following MOS notes:
ORA-20001: This Person Does Not Have Preferences For the Selected Effective Date [ID 876324.1]
ORA-20001: This Person Does Not Have Preferences For The Selected Effective Date [ID 761470.1]
Troubleshooting Guide for HRMS API Errors - ORA-20001 and APP Errors [ID 152259.1]
''This Person Does Not Have Preferences For The Selected Effective Date'' Message [ID 287581.1]
Diagnostics - Setup - Time and labour Person - Test failed [ID 397214.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Error after update : "Method 'Upgrade' does not have an implementation"

Hello,
After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' does not have an implementation.
And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
Any idea ?
Thanks in advance for your answer.
Mike

Hi Mike,
If you are using SharePoint 2013 Server edition, please re-download the
SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
issue you can take a look.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
Thanks
Daniel Yang
TechNet Community Support

Problem Create ANE,ArgumentError: Error #3500: The extension context does not have a method with the name

I little confuse about build ANE, I already follow all the direction, but the error always #3500 when I try to call the ANE.
I create ANE using java android.
The tools I use : Flash Builder running on Win-64 win.7. I think I must straight to the point, here what i made it first step by step;
1. I create the JAVA application first, with package senigo.extension.android then I create 3 file, Sample.java, SampleContext.java, PassTextFunction.java
Sample.Java Source Code
package senigo.extension.android;
import android.util.Log;
import com.adobe.fre.FREContext;
import com.adobe.fre.FREExtension;
public class Sample implements FREExtension {
@Override
public FREContext createContext(String arg0) {
// TODO Auto-generated method stub
Log.i("Sample", "createContext");
return new SampleContext();
@Override
public void dispose() {
// TODO Auto-generated method stub
Log.i("Sample", "Dispose");
@Override
public void initialize() {
// TODO Auto-generated method stub
Log.i("Sample", "Initialize");
SampleContext.Java Source Code
package senigo.extension.android;
import java.util.HashMap;
import java.util.Map;
import android.util.Log;
import com.adobe.fre.FREContext;
import com.adobe.fre.FREFunction;
public class SampleContext extends FREContext {
public SampleContext()
Log.i("SampleContext", "constructor");
@Override
public void dispose() {
// TODO Auto-generated method stub
Log.i("SampleContext", "dispose");
@Override
public Map<String, FREFunction> getFunctions() {
// TODO Auto-generated method stub
Log.i("SampleContext", "getFunctions");
Map<String, FREFunction> functionMap = new HashMap<String, FREFunction>();
functionMap.put("passText", new PassTextFunction());
return functionMap;
PassTextFunction.Java Source Code
package senigo.extension.android;
import com.adobe.fre.FREContext;
import com.adobe.fre.FREExtension;
import com.adobe.fre.FREFunction;
import com.adobe.fre.FREObject;
public class PassTextFunction implements FREFunction {
@Override
public FREObject call(FREContext arg0, FREObject[] arg1) {
// TODO Auto-generated method stub
FREObject result = null;
try{
result = FREObject.newObject("Hello World");
}catch(Exception e)
return result;
after all the file I create the jar file using click right on the tree view >> Export >> Jar File >> Sample.Jar (i already create jar file that just contain the src folder and after i frustrated, i create .jar file contain all the whole project folder but still didn't work out).
Ok, After that I create project Flex Library Project, That's contain the actionscript to call the native and the extension.xml, here the code.
Test.as Source Code, FYI : i already create public function and the static function the error still same #3500.
package senigo.extension.android
import flash.external.ExtensionContext;
public class test
private static var extContext:ExtensionContext = null;
public function test()
trace ("Test Constructor");
if (!extContext)
initExtension();
public static function get passText():String
trace ("Test Pass Text");
if (!extContext)
initExtension();
return extContext.call("passText") as String;
private static function initExtension():void
trace ("Vibration Constructor: Create an extension context");
extContext = ExtensionContext.createExtensionContext("senigo.extension.android", null);
extension.xml source code
FYI: in Flex when i put the Native Extension, they said must have Windows-x86 so I already create 3 ANE, that just contain Android-ARM , Contain Android-ARM and Default, Contain Android-ARM,Default and Windows-x86 but the error still same. I didn't got it where is the error.
<extension xmlns="http://ns.adobe.com/air/extension/3.1">
<id>senigo.extension.android</id>
<versionNumber>1.0.0</versionNumber>
<platforms>
<platform name="Android-ARM">
<applicationDeployment>
<nativeLibrary>Sample.jar</nativeLibrary>
<initializer>senigo.extension.android.Sample</initializer>
<finalizer>senigo.extension.android.Sample</finalizer>
</applicationDeployment>
</platform>

<platform name="default">
<applicationDeployment/>
</platform>
</platforms>
</extension>
After I create it, I copy the .swc file and extension file sample with the Sample.jar file.
I extract the .swc file, copy the library.swf to folder Android-ARM,Default,Windows-86 and I create build.bat that contain the command like this
adt -package -storetype PKCS12 -keystore senigo.p12 -storepass l10nk1ng -target ane senigo.extension.android.ane extension.xml -swc AndroidLib.swc -platform Android-ARM -C ./Android-ARM/ . -platform default -C ./default/ .
the I put the ane to Flex mobile project that I created:
I run it but got error #3500, I really confuse?? what's wrong with my code? is there something I wrong or I Miss it?
Please any one help me.. and when is already ane file can I debug it in Flex Mobile Project? I wanna looks the log.i code that i wrote but i confuse how to looking up in flash builder.
at the end, I wanna said Sorry if my english not very goods, and thanks, because wanna see my problem and thank you very much if You can gave me a solution's

Alex Rekish wrote:
Why you comment Windows-x86 in your extension.xml ?
I think that is a problem. You launch your application on Windows but ANE haven't got Windows-x86 implementation (also you don't include it while packaging). So your application use default implementation. But default implementation don't use any native code and cannot use ExtensionContext. And you got error.
If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation.
Thanks for you answer Alex Rekish, Sorry I didn't screen shoot all about the extension.xml. I comment it because the latest ANE that I build is contain Android-ARM and default. so I commented. but I already try it using just ANE that's just contain Android-ARM, with Android-ARM and windows-x86,and Android-ARM, and default, and Android-ARM,default,Windows-x86 the error still the same.
here the screen shoot, I embeded the ane that's i contain Windows-x86
in action script test.as I didn't change it anythings, I just play it on extension.xml to build the ane. is there any mistake over there? I interact with your answer that "If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation." I didn't need to user ExtensionContext? is means? in the actionscript? or in extension.xml? can you explained

I am getting error message saying iPhone 4 does not have enough memory to hold 270 iPhoto pictures that I want to import. I have this issue with my iPad 2 as well.

Does anyone know how to resolve this? please help.
Adrienne

We need some numbers. Connect the phone to your computer with a USB cable. Click on its name in iTunes.
Look at the bottom of the iTunes screen; there will be a graph of the memory usage of the phone. At the right end it will tell you how much free memory you have.
Now go to iPhoto. Select all of the images you want on the phone. iPhoto will tell you how much space is required.
Compare the 2 numbers, available vs total of the image sizes.

My downloads of iTunes and related software onto my Windows PC fails every time with error message that the software does not have valid signature. How to get around this problem?

I have trouble downloading iTunes software and related software like the new ios8 on both my desktop--Windows 7, and my laptop--Windows Vista, because I keep getting error messages saying the software has been deleted because invalid signature. I have tried download and install and I have tried just download, but neither method works. So I am stuck with the older software and my new iPad 2 Air isn't connecting because I need ios8 apparently.
I have an iPhone 5 and a new iPad 2 Air.
How to get around the Windows problem, please?
Thank you!

bump

Adobe air windows/C++:Error #3500: The extension context does not have a method with the name

I created a C++ dynamic dll called by air.
If the dll depends on other dlls, then the error#3500 occured. However removed other dlls, it works.
Could that mean the air can only call one dynamic dll that doesn't depend any other dlls?
does anybody met this problem before, or let me know what can I do?

Alex Rekish wrote:
Why you comment Windows-x86 in your extension.xml ?
I think that is a problem. You launch your application on Windows but ANE haven't got Windows-x86 implementation (also you don't include it while packaging). So your application use default implementation. But default implementation don't use any native code and cannot use ExtensionContext. And you got error.
If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation.
Thanks for you answer Alex Rekish, Sorry I didn't screen shoot all about the extension.xml. I comment it because the latest ANE that I build is contain Android-ARM and default. so I commented. but I already try it using just ANE that's just contain Android-ARM, with Android-ARM and windows-x86,and Android-ARM, and default, and Android-ARM,default,Windows-x86 the error still the same.
here the screen shoot, I embeded the ane that's i contain Windows-x86
in action script test.as I didn't change it anythings, I just play it on extension.xml to build the ane. is there any mistake over there? I interact with your answer that "If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation." I didn't need to user ExtensionContext? is means? in the actionscript? or in extension.xml? can you explained

HT1386 When I try and sync my brand new iPad I get an error message saying the IPad does not have the latest iTunes but the Ipad says it is up to date and I am stuck in the middle? Help.

The specific message is must download iTunes version 10.7 or later?

You will need at least Snow Leopard (10.6.8) to install iTunes 10.7. Check the Apple link below for requirements and ordering info for Snow Leopard.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

IMac late 2013 does not have "Computer sleep" setting in Energy Saver prefs

I seem to be missing the "Computer sleep" setting in my Energy Saver pref window. All I see is "Turn display off after" setting. The computer does go to sleep.Is this a change that was made for recent iMacs?

It appears that the chip manages the power states itself. Again getting exact information on this is a pain and I'm really surprised (well maybe not so surprised) that Apple hasn't said anything about this. You'd think if they make such a drastic change to the system and to the Energy Savings pane of System Preferences there would be something.
From http://www.itpro.co.uk/desktop-hardware/19655/intel-haswell-release-date-and-spe cs-revealed#ixzz2iJsWa73p
Haswell chips will have 3 power states, compared to two in its predecessor, Ivy Bridge. These will be Active, Sleep, and Active Idle. Intel claims the advanced power saving will help give it at least 20x power consumption improvement over third generation chips.
It appears that the CPU will put itself to sleep if it is inactive for so many cycles. In a way this makes sense, the old method of telling the system to sleep after so many minutes is really very imprecise.
The only reason not to put the system to sleep as soon as it is idle is that it takes some amount of time to wake-up. So the lag would be annoying if it happened each time the system was idle. With the Haswell chip (as near as I can make out) wake-up is almost instantaneous. So there is no lag going from sleep to running. With no lag then it becomes feasible to put the CPU to sleep sooner and more often.
Again there is nothing I can point you to that states this it's what I've pieced together from various sources. In any case the missing setting in System Preferences is not an error so I guess you'll get to experience fist hand how this all works. Post back with your observations, it will be interesting to hear what you think.
regards

Error : Input Definition 'Ground WIP' does not have a % Step set.

Similar Messages

Maybe you are looking for