Error Install NW04s SR1

Hi all,
I'm installing NW04s SR1 and have a Error in the sapinstlog.
ERROR 2006-12-08 17:32:50
MUT-03011  Execution of the command "J:\usr\sap\SAPinst\NW04S\SYSTEM\DB4\CENTRAL\AS\SAPCAR -x -v -g -i -f F:/J2EE_OSINDEP\J2EE-INST/J2EEINSTALL.SAR," finished with return code 29. Output: SAPCAR: no archives specified for extracting (error 29). No such file or directory
J: is the mapped rootbin directory of our server
F: is my DVD Local on my PC
ISERPACK8 is already patched.
can't see any failure ?
Are u having a solution ?
Grtz
Thomas

Hi Thomas,
classic error )
Thanks for your exact descriptions of F: etc.!
Where does what run ?
- on the PC JUST the SAPinst frontend runs !
- the iSeries ALL the installation runs !
=> F:\ is not available there (assuming, you install NW04s on iSeries ...)
=> I ALWAYS copy ALL CDs to "/instcds" on the iSeries and use them in the browser dialog via the drive "X:" (even when I always use X:, this doesn't matter).
but: the iSeries needs to have access there ...
=> I would start from scratch ...
good luck,
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

  • Installing NW04 SR1 WAS640 on NT

    We are trying to install XI (3.0) on an NT server to connect to R/3 (ECC5.0) on iSeries AS400.   The first step of the XI installation is to install the NW04 WAS 640.   The NW04 SR1 installation DVD listing has for the first DVD the SAP NW04 SR1 SAP (UNICODE) KERNEL 6.4 <Database>.   Our question is what Kernel is this for?   Our DVD are for the iSeries where R/3 was installed we are installing NW04 on an NT server.    Do we need the Kernel for NT?   Or is the Kernel for the iSeries sufficient as it will be connecting to the iSeries?
    Any help is appreciated!

    Hi,
    There must be some info. about the DVD
    if you install XI
    the kernel DVD should be :
    SAP NW04 SR1 SAP (UNICODE) KERNEL 6.4 <Database> <Platform>
    maybe the list is too long, and <platform> is not in your papaer list, just check your DVD Cover.

  • Error in installing  NW04s SR1 Portal

    Hi all,
    I am trying o install NW04sSR1(usage type EP).
    During the installation it went past all the satges unitl it again got stuck in the Configure development Infrastructure stage(stage 34 of 35).
    The error it shows is (output of sapinst) :
    ERROR 2006-10-13 08:00:10
    FCO-00011 The step assignUsersToGroups with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_DI|ind|ind|ind|ind|3|0|assignUsersToGroups was executed with status ERROR .
    The output of sapinst_dev shows the following in the last few lines:
    INFO       2006-10-13 08:00:04
               CJSlibModule::writeInfo_impl()
    Output of \QIBM\ProdData\Java400\jdk14\bin\java -classpath /usr/sap/EPD/JC01/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX EPDEV:50100 Administrator
    XXXXXX is written to the logfile java.log.
    INFO       2006-10-13 08:00:09
               CJSlibModule::writeInfo_impl()
    Execution of the command "\QIBM\ProdData\Java400\jdk14\bin\javaclasspath /usr/sap/EPD/JC01/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX EPDEV:50100 Administrator
    XXXXXX" finished with return code 0. Output:
    TYPE=S<BR>STATE=<BR>INFO_SHORT=<BR>CONFIGURATION=
    ERROR      2006-10-13 08:00:10
    FCO-00011  The step assignUsersToGroups with step key
    |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_DI|ind|ind|ind|ind|3|0|assignUsersToGroups was executed with status ERROR .
    Pls suggest what to do. I looked for this error on marketplace but did not get anything relevant.
    Thanks for all your help.
    Abhi

    Did you try to restart the J2EE engine and everything else and resume the installation then?
    We do this always before we look at the messages in depth...
    HTH Rudi

  • SAP Nw04s SR1 Installation

    Hi All,
       I am trying to install NW04s SR1. I have got the error "[ABAP: ACTIVE, Java: UNKNOWN] did not reach state PARTRUNNING after 20:00 minutes. Giving up."
    Same error has mentioned in below thread:
    Re: J2EE ENGINE don't start when sapinst is running
    The SAP note 848950,  just advices to restart the SAPinst, which doesnt change anything, but fails at the exact same point again.
    Regards,
    Piyush

    Piyush,
    How far is the J2EE eninge getting? Check the work directory and see how far it's getting. You should see bootstrap logs, then dispatcher logs, then server0 logs. Look at the 'out' logs as well for these entries. Try to determine where in the startup process the J2EE stack is failing.
    -Tim

  • Deploy vid SDM/J2EE hanged while Installing NW04 EP6 SR1

    Hi,
    I am installing NW04 EP6 SR1 installation on Windows 2003
    After starting SAPInst the installation hangs at Deploy vid SDM/J2EE
    at the log shows: PHASE 2006-11-15 17:07:39
    Deploying SDAs (using SDM and SAP Java EE Engine).
    But not going further from this stage, I tried restarting the Installation and even the J2EE and whole system too and no luck.
    Please help me out to over come this issue, I have checked the SAPinst.log and is as followsL
    NFO 2006-11-15 17:07:35
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2006-11-15 17:07:35
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2006-11-15 17:07:37
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO 2006-11-15 17:07:37
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO 2006-11-15 17:07:37
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.2.html.
    PHASE 2006-11-15 17:07:37
    Prepare the installation program.
    INFO 2006-11-15 17:07:38
    Installation start: Wednesday, 15 November 2006, 17:07:32; installation directory: C:\Program Files\sapinst_instdir\NW04\EP\EP; product to be installed: SAP NetWeaver '04 SR1> NetWeaver Components Running on Java> Portal Platform> Portal Installation
    INFO 2006-11-15 17:07:39
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO 2006-11-15 17:07:39
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO 2006-11-15 17:07:39
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.3.html.
    PHASE 2006-11-15 17:07:39
    Deploying SDAs (using SDM and SAP Java EE Engine).
    SAPinst_dev.log********* has the following error and I just found it
    Current access token
    ====================
    Could not get thread token. Last error: 1008. I assume that no thread token exists.
    Got process token.
    Privileges:
      Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
      Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
      Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
      Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
      Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
      Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
      Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
      Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
      Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
      Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
      Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
      Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
      Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
      Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
      Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
      Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
      Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
      Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
      Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
      Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
      Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
      Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
    Groups:
    Group count: 11
      \LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
      \Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      WATEST\Domain Users S-1-5-21-1442379584-1386351650-2746699151-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      VMTST050\ORA_DBA S-1-5-21-632969146-1124751804-835223308-1011 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      \ S-1-5-5-0-2480400 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
      NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
    TRACE      [syxxsyshlp.cpp:185]
               syslib::logSystemState()
    System information
    ==================
    OS version, host name: Microsoft Windows NT [Version 5.2.3790 Service Pack 1] VMTST050
    RAM size (MB): 3583.45
    Swap size (MB): 10687.5
    Please help me out to over come this if any one had idea on this.
    Regards
    Narsimha

    Hi Daniel,
    I am very much thankful for your kind reply. I have to check this with the network team. I just posted whole contents of SAPinst_dev.log file can you please have a quick look so that you may have your valuable suggestions for me to over come the issue:
    Regards
    Narsimha
    TRACE      [sapinst.cpp:285]
               CSapInst::initMessaging()
    Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:344]
               CControlFile::getMessageFilePath()
    Running with messages from C:/Program Files/sapinst_instdir/NW04/EP/EP
    TRACE      [sapinst.cpp:306]
               CSapInst::initMessaging()
    This is SAPinst, version 642, build 851600
    compiled on Aug 24 2006, 03:01:15
    TRACE      [sapinst.cpp:311]
               CSapInst::initMessaging()
    Gui connected by user svc_netwvr_inst from host vmtst050
    TRACE      [syxxsyshlp.cpp:175]
               syslib::logSystemState()
    Process environment
    ===================
    Environment Variables
    =====================
       = C:=C:\Program Files\sapinst_instdir\NW04\EP\EP
       = E:=E:\software\MASTERCD\IM_WINDOWS_I386\SAPINST\NT\I386
      ALLUSERSPROFILE = C:\Documents and Settings\All Users
      APPDATA = C:\Documents and Settings\svc_netwvr_inst\Application Data
      CLIENTNAME = WS10345
      ClusterLog = C:\WINNT\Cluster\cluster.log
      CommonProgramFiles = C:\Program Files\Common Files
      COMPUTERNAME = VMTST050
      ComSpec = C:\WINNT\system32\cmd.exe
      FP_NO_HOST_CHECK = NO
      HOMEDRIVE = C:
      HOMEPATH = \Documents and Settings\svc_netwvr_inst
      JAVA_HOME = C:\j2sdk1.4.2_13
      LOGONSERVER =
    VMTST001
      NUMBER_OF_PROCESSORS = 1
      OS = Windows_NT
      Path = E:\oracle\ora92\jre\1.4.2\bin\client;E:\oracle\ora92\jre\1.4.2\bin;E:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\j2sdk1.4.2_13\bin
      PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
      PROCESSOR_ARCHITECTURE = x86
      PROCESSOR_IDENTIFIER = x86 Family 15 Model 4 Stepping 8, GenuineIntel
      PROCESSOR_LEVEL = 15
      PROCESSOR_REVISION = 0408
      ProgramFiles = C:\Program Files
      SAINST_JRE_HOME = C:\j2sdk1.4.2_13\jre\bin
      SAPINST_EXEDIR_CD = E:/software/MASTERCD/IM_WINDOWS_I386/SAPINST/NT/I386
      SESSIONNAME = RDP-Tcp#3
      SystemDrive = C:
      SystemRoot = C:\WINNT
      TEMP = C:\Temp\1
      TMP = C:\Temp\1
      USERDNSDOMAIN = WATEST.WCORP.COM.AU
      USERDOMAIN = WATEST
      USERNAME = svc_netwvr_inst
      USERPROFILE = C:\Documents and Settings\svc_netwvr_inst
      windir = C:\WINNT
    User: WATEST\svc_netwvr_inst, Id: S-1-5-21-1442379584-1386351650-2746699151-39577
    Working directory: C:\Program Files\sapinst_instdir\NW04\EP\EP
    Current access token
    ====================
    Could not get thread token. Last error: 1008. I assume that no thread token exists.
    Got process token.
    Privileges:
      Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
      Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
      Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
      Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
      Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
      Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
      Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
      Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
      Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
      Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
      Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
      Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
      Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
      Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
      Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
      Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
      Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
      Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
      Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
      Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
      Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
      Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
    Groups:
    Group count: 11
      \LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
      \Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      WATEST\Domain Users S-1-5-21-1442379584-1386351650-2746699151-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      VMTST050\ORA_DBA S-1-5-21-632969146-1124751804-835223308-1011 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
      \ S-1-5-5-0-2480400 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
      NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
    TRACE      [syxxsyshlp.cpp:185]
               syslib::logSystemState()
    System information
    ==================
    OS version, host name: Microsoft Windows NT [Version 5.2.3790 Service Pack 1] VMTST050
    RAM size (MB): 3583.45
    Swap size (MB): 10687.5
    TRACE      [iaxxclientacceptor.cpp:124]
               CClientAcceptor::acceptImpl()
    Running with control file E:/software/MASTERCD/IM_WINDOWS_I386/SAPINST/NT/I386/PATCOL640/WEBAS630/IND/control.xml version 642 and changelist 15172
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:142]
               CControlFile::getKeydbControlFileName()
    Running with keydb file keydb.xml
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:235]
               CControlFile::getDialogControlFileName()
    Running with dialog control file dialog.xml
    TRACE      [iaxxccontrolfile.cpp:184]
               CControlFile::getResourecFileName()
    Running with resource file C:/Program Files/sapinst_instdir/NW04/EP/EP/helppool.xml
    INFO       2006-11-15 17:07:35 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO       2006-11-15 17:07:35 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iaccdlib.dll
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE      [iaxxclib.cpp:165]
               load()
    Opened iamodos.dll
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:37 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO       2006-11-15 17:07:37 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.2.html.
    INFO       2006-11-15 17:07:37 [synxcpath.cpp:834]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.2.html.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    PHASE      2006-11-15 17:07:37 [iaxxcwalker.cpp:416]
               CDomWalker::printPhaseInfo()
    Prepare the installation program.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:38 [iaxxcwalker.cpp:59]
               CDomWalker::walk()
    Installation start: Wednesday, 15 November 2006, 17:07:32; installation directory: C:\Program Files\sapinst_instdir\NW04\EP\EP; product to be installed: SAP NetWeaver '04 SR1> NetWeaver Components Running on Java> Portal Platform> Portal Installation
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_DQE_DB_CONTENT|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_DQE_SERVICE|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_DQE_EAR_INSTALLATION|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component startStopGenericWithoutDialogs|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component startStopGenericWithoutDialogs2|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_INSTALL_CM|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component startStopGenericWithoutDialogs|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component DEPLOY_CM_PAR_FILES|ind|ind|ind|ind|ind; available: 1; required: 0
    TRACE      [iaxxcdgprc.cpp:610]
               CDialogProcessor::printTraceOnChangedInstanceNum()
    Deactivated some dialog sequences for component EP_INSTALL_***|ind|ind|ind|EP60|ind; available: 1; required: 0
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04/EP/EP/summary.3.html.
    INFO       2006-11-15 17:07:39 [synxcpath.cpp:834]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\summary.3.html.
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    PHASE      2006-11-15 17:07:39 [iaxxcwalker.cpp:416]
               CDomWalker::printPhaseInfo()
    Deploying SDAs (using SDM and SAP Java EE Engine).
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    TRACE[E]   [syxxcfsmgt.cpp:269]
               CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
    Node product.catalog does not exist.
    TRACE      [iaxxccontrolfile.cpp:77]
               CControlFile::getControlFilePath()
    Running with control file path
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:402]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml.
    INFO       2006-11-15 17:07:39 [syxxcfile.cpp:523]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/EP/EP/keydb.2.xml.
    INFO       2006-11-15 17:07:39 [synxcpath.cpp:834]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04\EP\EP\keydb.2.xml.
    TRACE      [iaxxcwalker.cpp:296]
               CDomWalker::processStep()
    Executing installation step EP_PORTAL_MAIN|ind|ind|ind|EP60|ind|0|EP60|ind|ind|ind|EP60|ind|0|EP_MAIN_SP3|ind|ind|ind|EP60|ind|0|EP_ADAPT_PRT|ind|ind|ind|EP60|ind|0|EP_SET_UME_PROPERTIES|ind|ind|ind|ind|ind|0|updateJ2eeEngineSysProps
    TRACE      [iaxxejsexp.cpp:208]
               EJS_Installer::writeTraceToLogBook()
    EP_SET_UME_PROPERTIES:
          - getCD EP60 = E:/software/netweaver/EP-KMC/PORTAL
          - SDM_HOME = E:\usr\sap/J2E/JC00/SDM
          - j2ee = E:\usr\sap/J2E/JC00/SDM/../j2ee
          - configtoolPath = E:\usr\sap/J2E/JC00/SDM/../j2ee/configtool
          - xml_target = E:\usr\sap/J2E/JC00/SDM/../j2ee/configtool/ume_config.xml
          - xml_source = E:/software/netweaver/EP-KMC\TOOLS/TEMPLATES/ume_config.xml
          - configPropertiesFile = E:\usr\sap/J2E/JC00/SDM/../j2ee/configtool/config.properties

  • Error while Installing Nw04S SR2 Developer Workplace - Import Java Dump

    Hi All,
    Iam trying to install NW04S SR2 Developer Workplace.Iam getting error in 15 th step i.e Import Java Dump.
    I have gone thru SDN threads and check the basic things like
    Java Version,whether i can connect to database or not..
    Iam using SQL Server 2005,Win XP.The database is fine.
    Please find the log file content below and let me know  how to resolve the problem.
    J2E,jdbc/pool/J2E,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/NW04s/51032258\JAVA_EXPORT\JDMP -job "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MSSQL\IMPORT.XML" -log jload.log" finished with return code 1. Output:
    java version "1.4.2_14"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_14-b05)
    Java HotSpot(TM) Client VM (build 1.4.2_14-b05, mixed mode)
    15-Apr-2009 15:31:22 com.sap.inst.jload.Jload main
    INFO: Jload -sec J2E,jdbc/pool/J2E,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/NW04s/51032258\JAVA_EXPORT\JDMP -job C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MSSQL\IMPORT.XML -log jload.log
    15-Apr-2009 15:31:51 com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    15-Apr-2009 15:31:51 com.sap.inst.jload.Jload logStackTrace
    SEVERE: java.sql.SQLException: [NWMss][SQLServer JDBC Driver]Error establishing socket to host and port: GBC7621C:1433. Reason: Connection refused: connect
         at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
         at com.sap.nwmss.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
         at com.sap.nwmss.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseConnection.connect(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseConnection.open(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseDriver.connect(Unknown Source)
         at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
         at com.sap.inst.jload.db.DBConnection.connectViaSecureStore(DBConnection.java:105)
         at com.sap.inst.jload.db.DBConnection.connect(DBConnection.java:149)
         at com.sap.inst.jload.Jload.main(Jload.java:580)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    ERROR 2009-04-15 15:31:52
    CJS-30049  <html>Execution of JLoad tool 'C:\j2sdk1.4.2_14\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MSSQL\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/jload.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/antlr.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/exception.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/jddi.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/logging.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/offlineconfiguration.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/opensqlsta.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/J2E/SYS/exe/uc/NTI386/mssjdbc/base.jar;C:/usr/sap/J2E/SYS/exe/uc/NTI386/mssjdbc/util.jar;C:/usr/sap/J2E/SYS/exe/uc/NTI386/mssjdbc/sqlserver.jar;C:/usr/sap/J2E/SYS/exe/uc/NTI386/mssjdbc/spy.jar" -sec J2E,jdbc/pool/J2E,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/NW04s/51032258\JAVA_EXPORT\JDMP -job "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MSSQL\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/jload.java.log' for more information.</html>
    ERROR 2009-04-15 15:31:52
    FCO-00011  The step importJavaDump with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
    Thanks,
    Anil.

    > 15-Apr-2009 15:31:51 com.sap.inst.jload.Jload main
    > SEVERE: couldn't connect to DB
    > 15-Apr-2009 15:31:51 com.sap.inst.jload.Jload logStackTrace
    > SEVERE: java.sql.SQLException: [NWMss][SQLServer JDBC Driver]Error establishing socket to host and port: GBC7621C:1433. Reason: Connection refused: connect
    as you see yourself the jload is unable to connect to the database.
    Check that your firewall is properly configured and that the SQL Server agent is running.
    Markus

  • Error while installing NW04s with MS SQL Server 2005

    INFO 2007-06-12 11:36:58
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/inifile.4.xml'.
    INFO 2007-06-12 11:36:58
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/inifile.5.xml'.
    INFO 2007-06-12 11:37:01
    Execute step Component  W2K_ServicePack_Check|ind|ind|ind|indPreprocess  of component |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
    INFO 2007-06-12 11:37:15
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/keydb.3.xml'.
    INFO 2007-06-12 11:37:16
    Execute step doGrantServiceRights of component |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0.
    INFO 2007-06-12 11:37:21
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:37:21
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:37:21
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:37:21
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:38:29
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:38:30
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:38:30
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:38:30
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:38:30
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:38:31
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:38:31
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:38:31
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:38:31
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:38:31
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:38:32
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:38:32
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:38:32
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:38:32
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:38:32
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:10
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:10
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:10
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:10
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:10
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:13
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:13
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:13
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:13
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:13
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:14
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:14
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:14
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:14
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:14
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:15
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:15
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:15
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:15
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:15
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:15
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:15
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:15
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:15
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:15
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:16
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:16
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:16
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:16
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:16
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:16
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:16
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:16
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:16
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:16
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:16
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:16
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:16
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:16
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:16
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:17
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:17
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:17
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:17
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:17
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:17
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:17
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:17
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:17
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:17
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:18
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:18
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:18
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:18
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:18
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:18
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:18
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:18
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:18
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:18
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:19
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:19
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:19
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:19
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:19
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:19
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:19
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:19
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:19
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:19
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:20
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:20
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:20
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:20
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:20
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:20
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:20
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:20
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:20
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:20
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:20
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:20
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:20
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:20
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:20
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:21
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:21
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:21
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:21
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:21
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:21
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:21
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-11, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-21-2636335234-3221473321-619975244-1040, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service 'MSSQL$SAPDB' on computer 'Local'.
    ERROR 2007-06-12 11:49:21
    FSL-06002  Error 1060 (The specified service does not exist as an installed service.
    ) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'SqlAgent$SAPDB' NT service).
    ERROR 2007-06-12 11:49:21
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2007-06-12 11:49:21
    FCO-00011  The step doGrantServiceRights with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR .
    INFO 2007-06-12 11:49:22
    An error occured and the user decided to retry the current step: "|NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights".
    INFO 2007-06-12 11:49:22
    Successfully set '(S-1-5-18, NONE, +o | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_REA

    Hi David,
    Thanks for the reply. Actually the rpoblem has been resolved by using full version of MS SQL Server 2005.
    Earlier I was trying to install NW04s using SQL Server 2005 express edition or 2000 MSDE.
    The user had administrative privilages, so the problem was not with the access rights.
    Regards,
    Ritin Jain

  • Shared Memory Ceation error when we install NW04S Java Stack.

    Hi.
    I trying to install NW04S Java Stack in Windows 2003/ MS SQL but We got error to starting enqueue service for Java WAS.
    Error is
    [Thr 4364] Sun Mar 12 23:13:34 2006
    [Thr 4364] *** ERROR => ShmDelete: Invalid shared memory Key=34. [shmnt.c      719]
    [Thr 4364] *** ERROR => ShmCleanup: ShmDelete failed for Key:34. [shmnt.c      793]
    [Thr 4364] initialize_global: enqueue server without replication
    [Thr 4364] Enqueue: EnqMemStartupAction Utc=1142172814
    [Thr 4364] *** ERROR => [CreateOsShm] CreateFileMapping(37,36 KB) failed with Err=5
                  ERROR_ACCESS_DENIED: Access is denied.  [shmnt.c      2174]
    [Thr 4364] *** ERROR => ShmCreate: Create (37,37664,1) failed [shmnt.c      506]
    Anyone have idea for fixing this problem ?
    Reagrds, Arnold.

    Hi Arnold,
    Kindly check if the User SAPService<SID> is a member of
    the local administrator group. If not add manually and
    try again.
    Hope it helps.
    Regards
    Srikishan

  • Error when Installing NW04 using Rapid Installer:FJS-00003  ReferenceError

    Hi friends,
    As a part of Portal migration, i am installing NW04 using Rapid Installer 2.5.1 for SunOS.
    Installation went fine till phase "Database Oracle Patch" but in "Oracle Sidadm Env" phase, an error occured.
    Acc. to sapinst.log file:
    FJS-00003  ReferenceError: mgt is not defined (in script InstallationScript_10, line 12689: ???)
    I searched in SDN and found SAP Note 785921 and 668604. Both are asking us to do the same thing i.e.
    After the following line in control.xml
    "OraJ2ee.prototype.CreateProfilesFromTemplate = function() { "
    insert the line
    var mgt = new FileMgt();
    I did the same but no luck. I stopped the installation and again started it to see if it works but again the same thing.
    Can some one just tell me how to get rid off it?
    Regards,
    Nilz

    Hi Asshish,
    After installing the oracle database did you check whether JDK version is correct in the environment variables before installing the rapid installer.
    What happens is that oracle resets the JDK version to lower version, which is not acceptable to portal. So after installing the oracle verify the version of JDK in the Environment variables and the JAVA_HOME variable.
    Then you try to install the RI 2.5.1
    Regards
    Arun

  • Problem Installing EP 6.0 From NW04 SR1

    I already installed NW04, but I have a problem installing the EP in the phase "Start SAP J2EE Engine".
    I know that may take a long time, but every 30 min the installation bring me a message of timeout, asking for retry, but allways happens the same problem.
    I checked my instances, there r with green light. I also tried to Manually to Stop the service and start it again, but the problem is still there.
    My server is Windows 2003 Standart edition and I installed the Sql 2005 (of the DVDs from SAP)
    When I see the log there is no error.
    So if some1 know what may be happening, pls reply me ASAP.
    Thx

    Hi,
    The next time it timesout stop the installation and then manually stop and start the J2EE engine once. Once the engine is up then continue the installation and you should be able to finish.
    Cheers!!

  • Install Trex on NW04s SR1

    Hi,
    The option for installing TREX is not appearing in the SAP Master DVD for NW04s SR1.
    Can someone suggest how to install TREX on NW04s SR1?
    Thanks.

    Hi,
    nothing under SAP NetWeaver 2004s >> Standalone Engines >> Search and Classification (TREX) ??
    If not, maybe you have a look at the installation DVDs, there should be a setup.exe for TREX!?
    Michael
    Message was edited by: Michael Wiedemann

  • Installation Error for 2004s SR1 At Step Create User PIREPUSER

    Hello,
    I'm installing 2004s SR1 and I'm at step 62 and when it tries to create the PIREPUSER account, this is the error I get:
    ERROR      2006-08-23 14:46:44 [iaxxejsbas.cpp:178]
               EJS_ErrorReporter
    FJS-00003  TypeError: this.getSystemInfo() has no properties (in script
    NW_Onehost|ind|ind|ind|ind, line 12941: ???)
    ERROR      2006-08-23 14:46:44 [iaxxgenimp.cpp:736]
               showDialog()
    FCO-00011  The step CreateUser with step key
    |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind
    |ind|ind|5|0|NW_Usage_Types_Configuration_PI|ind|ind|ind|ind|1|0|GenericNew
    CreateAbapUser|ind|ind|ind|ind|1|0|CreateUser was executed with status
    ERROR .
    TRACE      [iaxxgenimp.cpp:657]
               showDialog()
    <html><head></head><body><p>An error occurred while processing service
    <b>SAP NetWeaver 2004s Support Release 1 > SAP Systems > MS SQL Server >
    Central System > Central System Installation</b>. You may now</p><ul>
    <li>press <I>Retry</I> to repeat the current step.</li> <li>press the
    <I>View Log</I> button to get more information about the error.</li>
    <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>D:\Program
    Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS</b>.</p></body></html>
    TRACE      [iaxxgenimp.cpp:1093]
               showDialog()
    waiting for an answer from gui
    INFO       2006-08-23 14:55:53 [iaxxgenimp.cpp:787]
               showDialog()
    An error occured and the user decide to stop.\n Current step
    "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|in
    d|ind|ind|5|0|NW_Usage_Types_Configuration_PI|ind|ind|ind|ind|1|0|GenericNe
    wCreateAbapUser|ind|ind|ind|ind|1|0|CreateUser".
    The funny thing is that in the previous steps when it created users and called RFC_SYSTEM_INFO, there was no problem.  Only when it gets to this User.
    Note that before the FJS-00003 error, the line before it in the trace file stated "RFC Connection closed."  This is for one of the successful BAPI_USER_CREATE1 calls it had made.
    Please help if you can...I want to desperately to complete the installation.
    Many thanks,
    Mike

    Hi Mike
    Am also facing exactly the same problem with PIAPPLUSER....Desperately waiting to complete this installation,Please help me how you deleted the user table entires where did u do it?

  • Got stuck ---- importing java dump while installing NW04s .....

    Hi All,
    I am installing NW04s. Doing EP on java stack. I got stuck in the 17th step ie..import java dump... the log file says...
    ERROR 2006-11-28 16:18:17
    CJS-30049  Execution of JLoad tool 'C:\j2sdk1.4.2_10\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\MSS\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/jload.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/antlr.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/exception.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/jddi.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/logging.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/offlineconfiguration.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/opensqlsta.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/GDC/SYS/exe/uc/NTI386/mssjdbc/base.jar;C:/usr/sap/GDC/SYS/exe/uc/NTI386/mssjdbc/util.jar;C:/usr/sap/GDC/SYS/exe/uc/NTI386/mssjdbc/sqlserver.jar;C:/usr/sap/GDC/SYS/exe/uc/NTI386/mssjdbc/spy.jar" -sec GDC,jdbc/pool/GDC,
    BLRN50059958A/sapmnt/GDC/SYS/global/security/data/SecStore.properties,
    BLRN50059958A/sapmnt/GDC/SYS/global/security/data/SecStore.key -dataDir F:/Dumps/DVD_NW_2004s_Java_based_SW_Components\JAVA_EXPORT\JDMP -job "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 6. Check 'jload.log' and 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/MSS/CENTRAL/AS/jload.java.log' for more information.
    ERROR 2006-11-28 16:18:17
    FCO-00011  The step importJavaDump with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Java_OneHost|ind|ind|ind|ind|1|0|NW_Jload|ind|ind|ind|ind|12|0|importJavaDump was executed with status ERROR .
    The jload file says....
    Nov 28, 2006 4:06:09 PM com.sap.inst.jload.db.DBConnection disconnect
    INFO: disconnected
    Please let me know what do i need to do for continuing....
    Thanks in advance
    George

    Dan,
    I have restarted the system....
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table XAP_TAX_CATEGROOT
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: table XAP_TAX_CATEGROOT created
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: XAP_TAX_CATEGROOT loaded (0 rows)
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table XAP_TAX_CATEG_LANG
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: table XAP_TAX_CATEG_LANG created
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: XAP_TAX_CATEG_LANG loaded (0 rows)
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table XAP_TRA_TRANSCONTE
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: table XAP_TRA_TRANSCONTE created
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: XAP_TRA_TRANSCONTE loaded (0 rows)
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table XAP_TRA_TRANSPORTO
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: table XAP_TRA_TRANSPORTO created
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: XAP_TRA_TRANSPORTO loaded (0 rows)
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table XAP_UOM_UNITCONVES
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: table XAP_UOM_UNITCONVES created
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: XAP_UOM_UNITCONVES loaded (0 rows)
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: trying to create table XAP_UOM_UNITOFMEAS
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: table XAP_UOM_UNITOFMEAS created
    28.11.06 16:18:17 com.sap.inst.jload.Jload dbImport
    INFO: XAP_UOM_UNITOFMEAS loaded (0 rows)
    28.11.06 16:18:17 com.sap.inst.jload.db.DBConnection disconnect
    INFO: disconnected
    i can send u the jload if u can give ur mail id.
    My system is in Indian Std Time +5.30 from GMT.
    Regards
    George

  • Error installing Adobe Flash 11 "launchfail" after enable AppLocker

    Error installing Adobe Flash 11 "launchfail" after enable AppLocker please help. I have allow everyone from publisher for .exe and .msi

    I'll ask around, but I don't have any experience with AppLocker.  Have you gone through all of the documentation here?
    http://technet.microsoft.com/en-us/library/dd723678(v=ws.10).aspx

  • When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

    When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

    Hi,
    Please download the updates directly from the link below:
    WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
    MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    Regards,
    Sheena

Maybe you are looking for

  • Reducing PDF File

    How do I reduce the size of a PDF file? It is now 1.9 MB and I would like it to be 150kb. It is just a photograph of me and I can't send it through to some email servers because it is too big. A

  • Problem with font-family name

    I have adobe Univers LT Std font purchased and installed on my PC, but there is a problem when I try to use it on the webpage. The font has otf format. I noticed that Chrome and FireFox use different font-family names for this font. FireFox 25.0 seem

  • Best way to detect failure in Metro ethernet networks

    Hello , I am working for a well known provider and I am currently migrating one of my client from Frame-relay to Metro-ethernet link . I am actually looking for advices on what sort of mechanism to implement to detect a failure in the ME parth . As y

  • Size does matter!

    hello! im in need of some help with my acrobat x. im trying to reduce the sizes of some vary bloated textbooks uisng AAX (adobe acrobat x). i have managed to reduce the size of a 290mb file down to 80mb which is awesome! the problem comes with the 35

  • Iphone 4s doesn't vibrate after installing IOS 8.1

    My Iphone 4s, 32GB lately doesn't seem to vibrate and i suppose it is after the recent update of IOS 8.1 . It does vibrate when i do certain tasks like keying in a wrong password or when i go into Settings>Sound to ensure that vibrate is on for both