Error installing SCCM 2012 SP1 client

Hi All,
I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on a couple of windows 2008 R2 servers.
Error 1904. Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895
The ccmsetup.log details the same message without Error 1904 indicated.
I am installing the client using the SUP method, which has worked without any problems on all 180 other windows servers I have done. ccmsetup starts and downloads all pre reqs required for the client rollout, but it then hits this error and does not
finish the installation.
Any help would be much appreciated?
Regards PowerShell90

Hi,
I've seen this issue a couple of times and usually it's related to incorrect Versions of C++ Library installed on the system you try to install the Client. Try and remove any existing installations, reboot and install this version;
http://www.microsoft.com/en-us/download/details.aspx?id=26368
Let me know how it goes.

Similar Messages

New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
Nick

Hi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Problem Installing SCCM 2012 R2 client on Windows Thin PC 7 (Windows Embedded)

Hi, I'm trying to install SCCM 2012 R2 client on Windows thin pc 7
I check the ccmsetup.log and it returned this:
Failed to get list of protected volume: List pointer is NULL (3)
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
DetectEWF failed with 0x80070003. ccmsetup
07/08/2014 08:06:26'' 2040 (0x07F8)
DetectWindowsEmbeddedWF failed with 0x80070003.
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
A Fallback Status Point has not been specified. Message with STATEID='304' will not be sent.
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
Cannot install over embedded OS with WF enabled on the system drive.
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
CcmSetup failed with error code 0x80004005 ccmsetup
07/08/2014 08:06:26'' 1960 (0x07A8)
Can somebody help me?
Thanks
Renzo
PD: Sorry for my bad English

Cannot install over embedded OS with WF enabled on the system drive.
You have to disable write filters on that device first.
Torsten Meringer | http://www.mssccmfaq.de

[Forum FAQ] Management Point fails after installing SCCM 2012 SP1

Symptom:
The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
You might see some errors in mpMSI.log like listed below.
“Setup was unable to compile the file CcmExec_Global.mof”
“The error code is 80041002”
Cause:
Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
Resolution:
1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete _NAMESPACE.Name=”ccm”
3. Install Management Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Symptom:
The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
You might see some errors in mpMSI.log like listed below.
“Setup was unable to compile the file CcmExec_Global.mof”
“The error code is 80041002”
Cause:
Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
Resolution:
1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete _NAMESPACE.Name=”ccm”
3. Install Management Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Management Point fails after installing SCCM 2012 SP1

I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
1. Newly built Windows Server 2012 box
2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
[19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
[19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
[19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result.
Would really appreciate some help if anyone's fixed this issue

I'm still struggling, I've uninstalled MP
<04/16/14 08:06:59> SMSMP Setup Started....
<04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
<04/16/14 08:06:59> Deinstalling the SMSMP
<04/16/14 08:06:59> No versions of SMSMP are installed. Returning Success.
<04/16/14 08:06:59> ~RoleSetup().
Ran the command, Invoke-Command {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
Checked Namespace Instances to ensure '= ccm' is not longer there.
Rebooted Server and re-installed MP but it still fails
<04/16/14 08:37:26> ====================================================================
<04/16/14 08:37:26> SMSMP Setup Started....
<04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
<04/16/14 08:37:26> Installing Pre Reqs for SMSMP
<04/16/14 08:37:26> ======== Installing Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP
<04/16/14 08:37:26> Pre Req MSXML60 found.
<04/16/14 08:37:26> No versions of MSXML60 are installed. Would install new MSXML60.
<04/16/14 08:37:26> Enabling MSI logging. msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi
<04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
<04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
<04/16/14 08:37:26> Pre Req SqlNativeClient found.
<04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
<04/16/14 08:37:26> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Installing the SMSMP
<04/16/14 08:37:26> Passed OS version check.
<04/16/14 08:37:26> IIS Service is installed.
<04/16/14 08:37:26> No versions of SMSMP are installed. Installing new SMSMP.
<04/16/14 08:37:26> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/16/14 08:37:26> mp.msi exited with return code: 1603
<04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
<04/16/14 08:37:26> ~RoleSetup().
On checking I don't seem to have anything in IIS, no default web site.
I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
Any assistance would be greatly appreciated.
Thanks

Cannot install SCCM 2012 SP1 CU4

Hi,
I just tried to apply CU4 over one of my SCCM 2012 SP1 CU3 deployments and I receive the following message during the initial verification phase:
Server update status: This update applies to product version 5.0.7804. The installed version on this computer is 5.0.7958.1000. This update is not applicable to this computer.
Console update status: No serviceable configuration manager role was found on the local system.
If I engage the verification phase on this installation for CU2 and CU3 there is no problem at all, so this must be a CU4 package specific error.
Anybody experiencing the same behavior ?

The latest CU that I see for SCCM 2012 SP1 is SP1 Cumulative Update 3, are you sure you are working with the proper file? .
CU4 was released this week:
http://blogs.technet.com/b/configurationmgr/archive/2014/01/29/now-available-cumulative-update-4-for-system-center-2012-configuration-manager-service-pack-1.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Error installing SCCM 2012 client on server

Hi Guys,
I am trying to install the SCCM 2012 client on a machine in my domain. The account specified in client settings is indeed a local admin on this server, but I get the error below:
Any assistance much appreciated!

Hi GSS1,
You can check on the C:\Windows\ccmsetup\logs , files: ccmsetup.log and client.msi.log for errors of clues about the real failure.
On the other hand I would recommend you the manual installation from the UNC path, like:
\\SCCMServerName\SMS_sitecode\Client\ccmsetup.exe
and using the parameters listed here to define the settings: https://technet.microsoft.com/en-us/library/bb693546.aspx?f=255&MSPPError=-2147217396
Optionally you can copy the files from the \\...\Client\ folder to local and try a local installation.
Any of this steps will give you more clues about the failure if they fail or success.
Please share any update for more suggestions!

Previously blocked client computers - now cannot install SCCM 2012 R2 client

Hello,
I have a Primary Site on SCCM 2012 R2. New installation of 2012 R2, not upgrade from SCCM 2007. My environment is pretty small for now, having added just few dept computers in the company.
We are using SCCM for Endpoint Security antivirus deployment. Some time ago I had not configured the Discovery methods correctly and the scep client started to install on few machines on which it was not supposed to be installed. I removed the clients then
(both remote and local uninstallation) but since the sccm client was getinng installed again - I had to Block these few machines. Now the problem is that I cannot install the scep client on these computers that have previously been blocked. I am sure the previous
block is the reason because these are about 6-7 machines and only they do not install. All others do install scep client. The installation process goes smooth on these problematic machines, ccmsetup folder gets created in C:\Windows, I follow the ccmsetup.log
and it says " <![LOG[CcmSetup is exiting with return code 0]LOG]!><time="12:33:56.415-180" date="10-08-2014" component="ccmsetup" context="" type="1" thread="3992"
file="ccmsetup.cpp:10875"> " at the end of the log which is what it is supposed to show when installation goes ok, then Ccmexec.exe process continues running but folder Microsoft Security Client in C:\Program Files never gets
created and no scep client gets installed.
I tried deleting the computers from the sccm console and discovering them anew - did not help. Tried even renaming the comp locally, after having it deleted from sccm console, then adding it anew hoping sccm will regard it as a new resource-again no good.
All these computers have the Approve, Block and Unblock buttons greyed out/inactive in console.
Has anyone had this same problem? Any ideas what can be done. Thank you.
Regards,
Hristo

Hi,
were you ever able to fix this?
I'm running in a similar issue here.
One single client was blocked, then deleted, lateron recreated (imported manually name and MAC address).
Now the client is unable to register itself in SCCM 2012 R2 (no CU yet).
Tried the usual stuff: uninstalled SCCM client, remove the entries of CCMsetup and SMS from registry, deleted the SMS certs from the computer personal
store and deleted the smscfg.ini from C:\Windows. Then re-installed the SCCM client
Client logs look fine, except ClientIDManagerStartup.log:
<![LOG[[RegTask] - Client is not registered. Sending registration request for GUID:F295F120-9C99-4D10-82B7-027FDD86B5F6 ...]LOG]!><time="14:46:11.555-60" date="01-12-2015" component="ClientIDManagerStartup" context=""
type="1" thread="6320" file="regtask.cpp:1609">
<![LOG[[RegTask] - Server rejected registration request: 3]LOG]!><time="14:46:12.616-60" date="01-12-2015" component="ClientIDManagerStartup" context="" type="3" thread="6320" file="regtask.cpp:1675">
On the server:
Begin validation of Certificate [Thumbprint 12923BCACDAE5B89547A25E54BF11E533163742F] issued to 'SMS'   MP_RegistrationManager   12.01.2015 14:31:10   8600 (0x2198)
Completed validation of Certificate [Thumbprint 12923BCACDAE5B89547A25E54BF11E533163742F] issued to 'SMS'   MP_RegistrationManager   12.01.2015 14:31:10   8600 (0x2198)
Encountered database error while verifying headers for client 'GUID:F3063334-69B4-471F-B158-56782E499F4A' (0x87d00238).   MP_RegistrationManager   12.01.2015 14:31:10   8600 (0x2198)
CCMValidateAuthHeaders failed (0x87d00238) to validate headers for client 'GUID:F3063334-69B4-471F-B158-56782E499F4A'.   MP_RegistrationManager   12.01.2015 14:31:10   8600 (0x2198)
A client is trying to re-register with an administrator revoked certificate: SMSID='GUID:F295F120-9C99-4D10-82B7-027FDD86B5F6'.   MP_RegistrationManager   12.01.2015 14:31:10   8600 (0x2198)
MP Reg: Processing completed. Completion state = 0   MP_RegistrationManager   12.01.2015 14:31:10   8600 (0x2198)
We are using HTTP for client communication.
Any ideas appreciated.
Michael

Repporting problem after install SCCM 2012 SP1

Hi there:
After install SP1, our reporting does not work any more. It pop up following error messages.
Any helps on this?
Thanks..................................
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Query execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Invalid object name 'fn_rbac_StatusMessagesAlerts'.
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)

Suspiciously similar to my report error after upgrading to SCCM 2012 R2 today:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Query execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Procedure or function 'sp_CP_StatusPercent_All' expects parameter
'@UserSIDs', which was not supplied.
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Any ideas?

SCCM 2012 SP1 client compatiblity with OS X

Hi,
Anyone knows if CM 2012 SP1 CU3 or older is compatible with OS X 10.9
Mavericks?
Thanks

http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigMacClientReq So the answer is yes.
Torsten Meringer | http://www.mssccmfaq.de

Collection evaluator error in SCCM 2012 SP1

I m getting below errors continuously in colleval.log,
CCEPSource::GetCollectionInfo:- Collection Not Found with CollectionID=2924
CEP-ErrorCode=-2016280319
CEP-Failed to process Collection Extended Properties changes, Status = COLLECTION NOT FOUND FOREIGN KEY CONSTRAINTS, changes will be retried on next processing cycle.
But, there is no such collection id '2924' in SCCM database. Due to these continuous errors, SMS_Collection_Evaluator component is in Critical.

Colleval.box had some CEP files (240+ files) and I deleted all of them.
Now, Colleval.box is empty and Colleval.box\Retry folder is also empty.

Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895 Problem installing sccm 2012 client

Hi,
I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on windows 2008 R2 servers.Why StatusAgentProxy.dll fails to register.
<![LOG[MSI: Action 22:08:03: RegisterTypeLibraries. Registering type libraries]LOG]!><time="22:08:03.092-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[MSI: Action 22:08:03: SelfRegModules. Registering modules]LOG]!><time="22:08:03.827-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[MSI: Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895. Contact your support personnel.]LOG]!><time="22:08:03.889-330" date="12-18-2013" component="ccmsetup"
context="" type="3" thread="8096" file="msiutil.cpp:300">
<![LOG[MSI: Action 22:08:03: Rollback. Rolling back action:]LOG]!><time="22:08:03.952-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text:
ExitCode: 1603
Action: SelfRegModules.
ErrorMessages:
Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895. Contact your support personnel.
I've already checked this forum but nothing helped .
Please provide a valid action plan to resolve this issue.
I'd highly appreciate any help.
Thanks and regards
Arsalan

Hi,
Restart those server might be helpful.
After installing the Client manually, you could check the registration of statusagentproxy.dll in that log.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Installing and Managing SCCM 2012 R2 client in workgroup

Hi,
I'm trying to install sccm 2012 r2 client on a workgroup workstation, but i can't manage to put the client working.
Already tried this solutions
http://blogs.technet.com/b/anilm/archive/2012/05/06/managing-workgroup-clients-in-configuration-manager-2012.aspx
http://eskonr.com/2013/08/sccm-configmgr-2012-manage-workgroup-computers-for-deploymentremote-tools-etc/
if i use this commands to install the client the client don't install.
ccmsetup.exe /source:C:\client SMSSITECODE=PRI SMSMP=sgcmcen.cm12lab.com DNSSUFFIX=cm12lab.com
if i use this one same happens
Ccmsetup.exe /mp:sccmserver SMSSITECODE=XXX FSP=sccmserver DNSSUFFIX=dnssuffix
If i use this one the client gets installed and the site code assigned but nothing more. It shows at the sccm console, but don't receive informations from sccm i think
Ccmsetup.exe /mp:sccmserver SMSSITECODE=XXX SMSSLP=sccmserver DNSSUFFIX=dnssuffix
on the client, clicking in Site tab and configure settings, the site code is there, clicking in Find Site returns error saying that cant find the site. on the locationservices log i'm getting
Policy prevents failover to WINS for lookup
Unable to retrieve AD Site membership
No Location reply received from xxxxxx.domain.xxx
No location reply received from xxxxxx
thks in advance

It should work just by:
Copy the client files (the whole directory) to the workgroup computer (c:\tmp\Client)
Run ccmsetup.exe /source:c:\tmp\Client SMSSITECODE=PRI SMSMP=sgcmcen.cm12lab.com DNSSUFFIX=CM12LAB.COM
Examine %windir%\ccmsetup\logs\ccmsetup.log for more information if the client doesn't install at all, possible causes might be corrupted WMI, lack of BITS (if running Windows 2003 server).. in these cases you could run WMIDiag (http://www.microsoft.com/en-us/download/details.aspx?id=7684)
to get more info on the errors and how to fix them.
Couple of checks:
DNS is working correctly both ways? Workgroup machine can find ConfigMgr server and ConfigMgr server can find workgroup machine by name? You can test this by running
nslookup <target.fqdn> on both
Workgroup computer is in the boundary / boundary group that has a site server assigned

SCCM 2012 R2 Client only showing 2 items under Actions

I've enable AD Forest Discovery on Primary Site also checked Automatically create AD site boundaries when they are discovered and Automatically create IP address range boundaries for IP subnets when they are discovered.
I didn't change this (default) Disable AD Forest Discovery on CAS.
I am still running SCCM 2007 R3 SP2 in Production environment. Do I need to remove all the boundaries first on SCCM 2007? Before I could install SCCM 2012 R2 client?
The reason that I manually install SCCM 2012 R2 client to my test computers just want to see if the SCCM 2012 R2 client will install without any issues. Right now, there's :(
On my Client Push Installation Properties, I haven't Enable automatic site-wide push installation. I just don't want SCCM 2012 R2 client is automatically pushing it out. Should I enable this? Is there any effect?
Two nights ago, I manually deploy SCCM 2012 R2 client (right click to deploy SCCM Client) to my test Win7x64 Enterprise and Win8.1x64 Enterprise. Until this morning Actions are not fully there (it should be total 11)
SCCM 2012 R2 client (version 5.00.7958.1000) installed but SCEP 2012 is not install (I think there's a problem here) since I checked the Actions button on both of Win7x64 Enterprise and Win8.1x64 Enterprise are only showing 2 Actions:
1. Machine Policy Retrieval & Evaluation Cycle
2. User Policy Retrieval & Evaluation Cycle
I've checked on both of Win7x64 Enterprise and Win8.1x64 Enterprise logs (using CMTrace):
1. CcmExec.log -> no errors
2. LocationServices.log -> Current AD site of machine is Default-First-Site-Name
3. ClientLocation.log -> It knows my new MP (correct one)
4. ClientIDManagerStartup.log -> with errors below
ClientIDManagerStartup.log has lots of RED errors (same one):
<![LOG[RegTask: Failed to send registration request message. Error: 0x8000000a]LOG]!><time="11:26:13.695+420" date="07-03-2014" component="ClientIDManagerStartup" context="" type="3" thread="1716"
file="regtask.cpp:1297">
I am hoping someone will be able to point me to the right direcly, please. Thanks, Reza
Reza Prawirasatya

Idan,
Thanks for the info.
I have check this registry below:
Check in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Mobile Client
It's pointing to my new site code of SCCM 2012 R2 (it's not SCCM 2007 site code).
What I did wrong I deploy SCCM 2012 Client Custom Settings to a collection that I created and also Antimalware Policies to that collection as well where that collection has 0 (none members).
So I deleted and just simply pointed both SCCM 2012 Client Custom Settings and Antimalware Policies to All Systems and all my test computers (workstations & servers) have SCCM 2012 R2 client along with SCEP 2012.
I have more questions below:
What's the best way for me to approach this SCCM 2012 R2 Client push to a test computers (workstations and servers).
I have SCCM 2007 R3 SP2 is still running in Production, currently Boundaries set as IP subnet (not using AD Site, it used but I changed it 2 years ago).
Now, SCCM 2012 R2 Primary Site set Enable AD Forest Discovery with Automatically create AD & Automatically create IP address range boundaries for IP subnets.
Of course, by turning this option above, it will pick up lots of different IP subnets. Even the one our sister company (lots of different domain).
1. In SCCM 2012 R2 Boundary Groups, I set Default-First-Site-Name (AD Site), under Site Systems tab, I have also my Primary Site SCCM 2012 R2 here.
Here's the questions:
1. Do I need to add IP subnet in SCCM 2012 R2 Boundary Groups? Do I need to add let's say 10.xxx.20.xxx (IP subnet here).
2. Also, do I need to delete IP subnet in SCCM 2007 Boundaries that correspond to that IP subnet? Let's say I have 10.xxx.20.xxx (IP subnet here) and remove this one since I have added on number 1?
Reza Prawirasatya

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

Error installing SCCM 2012 SP1 client

Similar Messages

Maybe you are looking for