Error installing windows 7 on 890gxm-g65 & phenom x6 1055T

hi, i've got a big issue, i've bought a new pc to assembly by myself but i'can't install any OS
my config is :
890gxm-G65 (ms 7642v1.00)
amd x6 1055t
2x2go ddr 3 kingston 1333mhz(9-9-9-24)
SSD corsair force60 go
HDD western digital 1to caviar green
sapphire radeon 5770 vapor-X
ocz modular psu 500W
i can't install any os i tried to ( Seven ultimate 32 and 64 bit, XP home sp3)
after the very first step of the install ( black screen with "Windows is loading files" on below), it freezed or a blue screen appeared with the error message ***STOP 0x000000000; 0x30000000; 0x50000 etc.
all my boot cd are well burnt (tested on another pc) i've tested the ram, the ssd, the hdd and the reader separately and everything work fine another pc.
my processor is not recognized by the bios, but i'didn't managed to flash the bios with M-flash.
If some could advice me, it would be great!!

Try physically inspecting the processor for any missing or bent pins.  If you're going to flash the BIOS, make sure to do it with the forum's USB flashing tool.  It has a 100% success rate and everybody that has used it (including myself) swear by it.
https://forum-en.msi.com/index.php?topic=108079.0

Similar Messages

  • 890GXM G65 Phenom II X6 BIOS query

    Hi. I didn't get the required information from the sticky regarding thuban support for the above mentioned board, so I've created a new thread. I have a plan of buying AMD Phenom II X6 1055T processor and MSI 890GXM G65 board. The board at the time of release didn't have the support for thubans, so most probably I'd need to get a BIOS update for the installation of the thuban CPU. My question is, Will it boot with the thuban CPU even without the bios update? I'm asking this because I don't have an old AMD CPU to carry out the BIOS update process. If it doesn't boot, the it's a complete waste of money. Thanks in advance...

    I was afraid of this combo but my results were fine. I bought the combo at Frys and it came with bios version 1.4 and booted and worked fine through windows, but it would not recognize cpu speed accurately after overclock( had nothing to do with amd cool feauture) After 1.6 bios update its recognized flawlessly. You shouldnt need to have another processor to do a bios update,it should still allow you to boot to bios.
    This is guide i followed to flash bios successfully with bootable usb
    https://forum-en.msi.com/moderator//BIOS_FD.pdf

  • Error install windows 8.1 on a 2010 macbook pro 13 inc

    hi.
    i am trying to install windows 8.1 on a 2010 macbook pro 13 inc
    i have now successfully make bootcamp show the option to create a windows 7 install disk how ever it does not show the other part of create windows 7 or “later version” install disk .
    and also i get an error when making a windows 8.1 bootable disk which says
    “boot camp only supports windows 7 installation on this platform.plz use an iso file for windows 7 installation””
    need help plzz
    thank you
    —–afrah—-
    Message was edited by: afrah000

    Welcome to Apple Support Communities
    Although you managed to "hack" Boot Camp Assistant and you can create a Windows USB installer, you will not be able to boot from the USB drive and you will get a nice "No bootable device" screen after restarting your Mac.
    Apple has set up Boot Camp Assistant in order to show the option to create a USB installer only in Macs which support it. In the case of the MacBook Pro, only MacBooks Pro with Retina display support that option, so you are out of luck. You need Windows on a DVD.

  • Error installing windows azure pack; websites v2

    When installing windows azure pack: websites v2 gives the error.  All dependencies are installed successfully on windows 2012 R2. Other windows azure pack express  installed successfully in another machine.  when I try install WAP websites
    v2 on another windows 2012 R2 gives the error.  The log file follows:
    === Verbose logging started: 1/2/2014  2:05:55  Build type: SHIP UNICODE 5.00.9600.00  Calling process: C:\Windows\system32\inetsrv\InetMgr.exe ===
    MSI (c) (34:94) [02:05:55:521]: Resetting cached policy values
    MSI (c) (34:94) [02:05:55:521]: Machine policy value 'Debug' is 0
    MSI (c) (34:94) [02:05:55:521]: ******* RunEngine:
               ******* Product: C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\WebSitesFeed.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (34:94) [02:05:55:521]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (34:94) [02:05:55:521]: Grabbed execution mutex.
    MSI (c) (34:94) [02:05:56:099]: Cloaking enabled.
    MSI (c) (34:94) [02:05:56:099]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (34:94) [02:05:56:115]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (A4:24) [02:05:56:271]: Running installation inside multi-package transaction C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\WebSitesFeed.msi
    MSI (s) (A4:24) [02:05:56:271]: Grabbed execution mutex.
    MSI (s) (A4:64) [02:05:56:302]: Resetting cached policy values
    MSI (s) (A4:64) [02:05:56:302]: Machine policy value 'Debug' is 0
    MSI (s) (A4:64) [02:05:56:302]: ******* RunEngine:
               ******* Product: C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\WebSitesFeed.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (A4:64) [02:05:56:412]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (A4:64) [02:05:56:505]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (A4:64) [02:05:56:599]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (A4:64) [02:05:56:662]: MSCOREE not loaded loading copy from system32
    MSI (s) (A4:64) [02:05:58:005]: End dialog not enabled
    MSI (s) (A4:64) [02:05:58:021]: Original package ==> C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\WebSitesFeed.msi
    MSI (s) (A4:64) [02:05:58:021]: Package we're running from ==> C:\Windows\Installer\fd7dc.msi
    MSI (s) (A4:64) [02:05:58:021]: APPCOMPAT: Uninstall Flags override found.
    MSI (s) (A4:64) [02:05:58:021]: APPCOMPAT: Uninstall VersionNT override found.
    MSI (s) (A4:64) [02:05:58:021]: APPCOMPAT: Uninstall ServicePackLevel override found.
    MSI (s) (A4:64) [02:05:58:130]: APPCOMPAT: looking for appcompat database entry with ProductCode '{7DE9D988-C892-43A6-884B-74A5008D6018}'.
    MSI (s) (A4:64) [02:05:58:177]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (A4:64) [02:05:58:849]: Machine policy value 'DisablePatch' is 0
    MSI (s) (A4:64) [02:05:58:849]: Machine policy value 'AllowLockdownPatch' is 0
    MSI (s) (A4:64) [02:05:58:849]: Machine policy value 'DisableLUAPatching' is 0
    MSI (s) (A4:64) [02:05:58:849]: Machine policy value 'DisableFlyWeightPatching' is 0
    MSI (s) (A4:64) [02:05:58:880]: APPCOMPAT: looking for appcompat database entry with ProductCode '{7DE9D988-C892-43A6-884B-74A5008D6018}'.
    MSI (s) (A4:64) [02:05:58:880]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (A4:64) [02:05:58:880]: Transforms are not secure.
    MSI (s) (A4:64) [02:05:58:880]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\logs\install\2014-01-02T02.05.44\WebSitesFeed.txt'.
    MSI (s) (A4:64) [02:05:58:880]: Command Line: WEBSITES_FEED=http://go.microsoft.com/?linkid=9837345 FEED_HASH=826363D220C6EF0D8DBF36FA63172A339D16C268 FEED_FILE_NAME=WebSites0.9.0.xml WEBSITES_UPGRADE_ACTIONS=None ACTION=INSTALL REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Windows\system32
    CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=2868
    MSI (s) (A4:64) [02:05:58:880]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{F8DA307E-FEA1-4E30-8764-A09F1C1B8271}'.
    MSI (s) (A4:64) [02:05:58:880]: Product Code passed to Engine.Initialize:           '{7DE9D988-C892-43A6-884B-74A5008D6018}'
    MSI (s) (A4:64) [02:05:58:880]: Product Code from property table before transforms: '{7DE9D988-C892-43A6-884B-74A5008D6018}'
    MSI (s) (A4:64) [02:05:58:880]: Product Code from property table after transforms:  '{7DE9D988-C892-43A6-884B-74A5008D6018}'
    MSI (s) (A4:64) [02:05:58:880]: Product registered: entering maintenance mode
    MSI (s) (A4:64) [02:05:58:880]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
    MSI (s) (A4:64) [02:05:58:880]: PROPERTY CHANGE: Modifying ALLUSERS property. Its current value is '2'. Its new value: '1'.
    MSI (s) (A4:64) [02:05:58:880]: Product {7DE9D988-C892-43A6-884B-74A5008D6018} is admin assigned: LocalSystem owns the publish key.
    MSI (s) (A4:64) [02:05:58:880]: Product {7DE9D988-C892-43A6-884B-74A5008D6018} is managed.
    MSI (s) (A4:64) [02:05:58:880]: MSI_LUA: Credential prompt not required, user is an admin
    MSI (s) (A4:64) [02:05:58:880]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
    MSI (s) (A4:64) [02:05:58:880]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
    MSI (s) (A4:64) [02:05:58:896]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
    MSI (s) (A4:64) [02:05:58:896]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (A4:64) [02:05:58:896]: Specifed source is already in a list.
    MSI (s) (A4:64) [02:05:58:896]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (A4:64) [02:05:58:896]: Machine policy value 'DisableBrowse' is 0
    MSI (s) (A4:64) [02:05:58:896]: Machine policy value 'AllowLockdownBrowse' is 0
    MSI (s) (A4:64) [02:05:58:896]: Adding new sources is allowed.
    MSI (s) (A4:64) [02:05:58:896]: Package name retrieved from configuration data: 'WebSitesFeed.msi'
    MSI (s) (A4:64) [02:05:58:896]: Note: 1: 2205 2:  3: Error
    MSI (s) (A4:64) [02:05:58:912]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (s) (A4:64) [02:05:58:912]: Machine policy value 'DisableMsi' is 1
    MSI (s) (A4:64) [02:05:58:912]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (s) (A4:64) [02:05:58:912]: User policy value 'AlwaysInstallElevated' is 0
    MSI (s) (A4:64) [02:05:58:912]: Product {7DE9D988-C892-43A6-884B-74A5008D6018} is admin assigned: LocalSystem owns the publish key.
    MSI (s) (A4:64) [02:05:58:912]: Product {7DE9D988-C892-43A6-884B-74A5008D6018} is managed.
    MSI (s) (A4:64) [02:05:58:912]: Running product '{7DE9D988-C892-43A6-884B-74A5008D6018}' with elevated privileges: Product is assigned.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Adding WEBSITES_FEED property. Its value is 'http://go.microsoft.com/?linkid=9837345'.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Adding FEED_HASH property. Its value is '826363D220C6EF0D8DBF36FA63172A339D16C268'.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Adding FEED_FILE_NAME property. Its value is 'WebSites0.9.0.xml'.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Modifying WEBSITES_UPGRADE_ACTIONS property. Its current value is 'CreateOrUpdateFeed'. Its new value: 'None'.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Windows\system32'.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
    MSI (s) (A4:64) [02:05:58:912]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '2868'.
    MSI (s) (A4:64) [02:05:58:912]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
    MSI (s) (A4:64) [02:05:59:084]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '511fc0c519f6f7459d8de9cdea06010a'.
    MSI (s) (A4:64) [02:05:59:084]: RESTART MANAGER: Session opened.
    MSI (s) (A4:64) [02:05:59:084]: TRANSFORMS property is now:
    MSI (s) (A4:64) [02:05:59:084]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
    MSI (s) (A4:64) [02:05:59:084]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
    MSI (s) (A4:64) [02:05:59:084]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming
    MSI (s) (A4:64) [02:05:59:084]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Favorites
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Documents
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Recent
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Templates
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Local
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Pictures
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (s) (A4:64) [02:05:59:099]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Desktop
    MSI (s) (A4:64) [02:05:59:115]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
    MSI (s) (A4:64) [02:05:59:115]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
    MSI (s) (A4:64) [02:05:59:115]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
    MSI (s) (A4:64) [02:05:59:115]: MSI_LUA: Setting AdminUser property to 1 because the product is already installed managed and per-machine
    MSI (s) (A4:64) [02:05:59:115]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
    MSI (s) (A4:64) [02:05:59:115]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
    MSI (s) (A4:64) [02:05:59:115]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
    MSI (s) (A4:64) [02:05:59:115]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (s) (A4:64) [02:05:59:115]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
    MSI (s) (A4:64) [02:05:59:115]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (s) (A4:64) [02:05:59:115]: PROPERTY CHANGE: Adding Installed property. Its value is '00:00:00'.
    MSI (s) (A4:64) [02:05:59:115]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\fd7dc.msi'.
    MSI (s) (A4:64) [02:05:59:115]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\WebSitesFeed.msi'.
    MSI (s) (A4:64) [02:05:59:115]: Machine policy value 'MsiDisableEmbeddedUI' is 0
    MSI (s) (A4:64) [02:05:59:115]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
    MSI (s) (A4:64) [02:05:59:115]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
    MSI (s) (A4:64) [02:05:59:115]: Note: 1: 2205 2:  3: PatchPackage
    MSI (s) (A4:64) [02:05:59:115]: Machine policy value 'DisableRollback' is 0
    MSI (s) (A4:64) [02:05:59:115]: User policy value 'DisableRollback' is 0
    MSI (s) (A4:64) [02:05:59:115]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
    === Logging started: 1/2/2014  2:05:59 ===
    MSI (s) (A4:64) [02:05:59:115]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (A4:64) [02:05:59:146]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
    MSI (s) (A4:64) [02:05:59:146]: Doing action: INSTALL
    Action start 2:05:59: INSTALL.
    MSI (s) (A4:64) [02:05:59:177]: Running ExecuteSequence
    MSI (s) (A4:64) [02:05:59:177]: Doing action: AppSearch
    Action start 2:05:59: AppSearch.
    MSI (s) (A4:64) [02:05:59:177]: PROPERTY CHANGE: Adding IISINSTALLPATH property. Its value is 'C:\Windows\system32\inetsrv'.
    MSI (s) (A4:64) [02:05:59:177]: PROPERTY CHANGE: Adding IISMAJORVERSION property. Its value is '#8'.
    MSI (s) (A4:64) [02:05:59:177]: PROPERTY CHANGE: Adding IISMINORVERSION property. Its value is '#5'.
    MSI (s) (A4:64) [02:05:59:177]: PROPERTY CHANGE: Adding IISCOREWEBENGINEINSTALLED property. Its value is '#1'.
    MSI (s) (A4:64) [02:05:59:177]: PROPERTY CHANGE: Adding IISW3SVCINSTALLED property. Its value is '#1'.
    MSI (s) (A4:64) [02:05:59:177]: PROPERTY CHANGE: Adding IISMANAGEMENTCONSOLEINSTALLED property. Its value is '#1'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding IISNETFXEXTENSIBILITYINSTALLED property. Its value is '#1'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding IISASPNET property. Its value is '#1'.
    MSI (s) (A4:64) [02:05:59:193]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\IISADMIN 3: 2
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding IISREMOTECHANNELINSTALLED property. Its value is 'Microsoft.Web.Management.Remoting.HttpChannel, Microsoft.Web.Management.Remoting, Version=7.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding NETFRAMEWORK20 property. Its value is '#1'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding NETFRAMEWORK20_SP_LEVEL property. Its value is '#2'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding NETFRAMEWORK35_SP_LEVEL property. Its value is '#1'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding POWERSHELLINSTALLED property. Its value is '#1'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding WINDOWSUPDATE_START_TYPE property. Its value is '#3'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding WINDOWSEDITION property. Its value is 'ServerDatacenter'.
    MSI (s) (A4:64) [02:05:59:193]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WebPlatformInstaller\3 3: 2
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding WEBPI4INSTALLED property. Its value is '#1'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding SAVED_WEBSITES_FEED property. Its value is 'http://go.microsoft.com/?linkid=9837345'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding SAVED_FEED_HASH property. Its value is '826363D220C6EF0D8DBF36FA63172A339D16C268'.
    MSI (s) (A4:64) [02:05:59:193]: PROPERTY CHANGE: Adding SAVED_FEED_FILE_NAME property. Its value is 'WebSites0.9.0.xml'.
    MSI (s) (A4:64) [02:05:59:209]: PROPERTY CHANGE: Adding WEBPICMD property. Its value is 'C:\Program Files\Microsoft\Web Platform Installer\webpicmd.exe'.
    MSI (s) (A4:64) [02:05:59:209]: Doing action: FindRelatedProducts
    Action ended 2:05:59: AppSearch. Return value 1.
    MSI (s) (A4:64) [02:05:59:209]: Skipping FindRelatedProducts action: not run in maintenance mode
    Action start 2:05:59: FindRelatedProducts.
    MSI (s) (A4:64) [02:05:59:209]: Doing action: LaunchConditions
    Action ended 2:05:59: FindRelatedProducts. Return value 0.
    Action start 2:05:59: LaunchConditions.
    MSI (s) (A4:64) [02:05:59:209]: Doing action: SetFEED_FILE_NAME
    Action ended 2:05:59: LaunchConditions. Return value 1.
    Action start 2:05:59: SetFEED_FILE_NAME.
    MSI (s) (A4:64) [02:05:59:209]: Doing action: SetFEED_HASH
    Action ended 2:05:59: SetFEED_FILE_NAME. Return value 1.
    Action start 2:05:59: SetFEED_HASH.
    MSI (s) (A4:64) [02:05:59:209]: Doing action: SetWEBSITES_FEED
    Action ended 2:05:59: SetFEED_HASH. Return value 1.
    Action start 2:05:59: SetWEBSITES_FEED.
    MSI (s) (A4:64) [02:05:59:209]: Doing action: ValidateProductID
    Action ended 2:05:59: SetWEBSITES_FEED. Return value 1.
    Action start 2:05:59: ValidateProductID.
    MSI (s) (A4:64) [02:05:59:209]: Doing action: CostInitialize
    Action ended 2:05:59: ValidateProductID. Return value 1.
    MSI (s) (A4:64) [02:05:59:209]: Machine policy value 'MaxPatchCacheSize' is 10
    MSI (s) (A4:64) [02:05:59:224]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'C:\'.
    MSI (s) (A4:64) [02:05:59:224]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
    MSI (s) (A4:64) [02:05:59:224]: Note: 1: 2205 2:  3: Patch
    MSI (s) (A4:64) [02:05:59:224]: Note: 1: 2205 2:  3: PatchPackage
    MSI (s) (A4:64) [02:05:59:224]: Note: 1: 2205 2:  3: MsiPatchHeaders
    MSI (s) (A4:64) [02:05:59:224]: Note: 1: 2205 2:  3: __MsiPatchFileList
    MSI (s) (A4:64) [02:05:59:224]: Note: 1: 2205 2:  3: PatchPackage
    MSI (s) (A4:64) [02:05:59:224]: Note: 1: 2228 2:  3: PatchPackage 4: SELECT `DiskId`, `PatchId`, `LastSequence` FROM `Media`, `PatchPackage` WHERE `Media`.`DiskId`=`PatchPackage`.`Media_` ORDER BY `DiskId` 
    MSI (s) (A4:64) [02:05:59:224]: Note: 1: 2205 2:  3: Patch
    Action start 2:05:59: CostInitialize.
    MSI (s) (A4:64) [02:05:59:224]: Doing action: FileCost
    Action ended 2:05:59: CostInitialize. Return value 1.
    MSI (s) (A4:64) [02:05:59:240]: Note: 1: 2205 2:  3: MsiAssembly
    MSI (s) (A4:64) [02:05:59:240]: Note: 1: 2205 2:  3: Class
    MSI (s) (A4:64) [02:05:59:240]: Note: 1: 2205 2:  3: Extension
    MSI (s) (A4:64) [02:05:59:240]: Note: 1: 2205 2:  3: TypeLib
    Action start 2:05:59: FileCost.
    MSI (s) (A4:64) [02:05:59:240]: Doing action: CostFinalize
    Action ended 2:05:59: FileCost. Return value 1.
    MSI (s) (A4:64) [02:05:59:240]: PROPERTY CHANGE: Adding OutOfDiskSpace property. Its value is '0'.
    MSI (s) (A4:64) [02:05:59:240]: PROPERTY CHANGE: Adding OutOfNoRbDiskSpace property. Its value is '0'.
    MSI (s) (A4:64) [02:05:59:240]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceAvailable property. Its value is '0'.
    MSI (s) (A4:64) [02:05:59:240]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceRequired property. Its value is '0'.
    MSI (s) (A4:64) [02:05:59:240]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceRemaining property. Its value is '0'.
    MSI (s) (A4:64) [02:05:59:240]: Note: 1: 2205 2:  3: MsiAssembly
    MSI (s) (A4:64) [02:05:59:240]: Note: 1: 2228 2:  3: MsiAssembly 4:  SELECT `MsiAssembly`.`Attributes`, `MsiAssembly`.`File_Application`, `MsiAssembly`.`File_Manifest`,  `Component`.`KeyPath` FROM `MsiAssembly`, `Component` WHERE  `MsiAssembly`.`Component_`
    = `Component`.`Component` AND `MsiAssembly`.`Component_` = ?
    MSI (s) (A4:64) [02:05:59:240]: PROPERTY CHANGE: Adding DIR_WebSitesFeed property. Its value is 'C:\Program Files\IIS\Microsoft Web Sites\Feed'.
    MSI (s) (A4:64) [02:05:59:255]: Note: 1: 2205 2:  3: Patch
    MSI (s) (A4:64) [02:05:59:255]: Note: 1: 2205 2:  3: Condition
    MSI (s) (A4:64) [02:05:59:255]: PROPERTY CHANGE: Adding TARGETDIR property. Its value is 'C:\'.
    MSI (s) (A4:64) [02:05:59:255]: PROPERTY CHANGE: Adding DIR_IIS property. Its value is 'C:\Program Files\IIS\'.
    MSI (s) (A4:64) [02:05:59:255]: PROPERTY CHANGE: Adding DIR_WebSites property. Its value is 'C:\Program Files\IIS\Microsoft Web Sites\'.
    MSI (s) (A4:64) [02:05:59:255]: PROPERTY CHANGE: Modifying DIR_WebSitesFeed property. Its current value is 'C:\Program Files\IIS\Microsoft Web Sites\Feed'. Its new value: 'C:\Program Files\IIS\Microsoft Web Sites\Feed\'.
    MSI (s) (A4:64) [02:05:59:255]: Target path resolution complete. Dumping Directory table...
    MSI (s) (A4:64) [02:05:59:255]: Note: target paths subject to change (via custom actions or browsing)
    MSI (s) (A4:64) [02:05:59:255]: Dir (target): Key: TARGETDIR , Object: C:\
    MSI (s) (A4:64) [02:05:59:255]: Dir (target): Key: WindowsFolder , Object: C:\Windows\
    MSI (s) (A4:64) [02:05:59:255]: Dir (target): Key: ProgramFiles64Folder , Object: C:\Program Files\
    MSI (s) (A4:64) [02:05:59:255]: Dir (target): Key: DIR_IIS , Object: C:\Program Files\IIS\
    MSI (s) (A4:64) [02:05:59:255]: Dir (target): Key: DIR_WebSites , Object: C:\Program Files\IIS\Microsoft Web Sites\
    MSI (s) (A4:64) [02:05:59:255]: Dir (target): Key: DIR_WebSitesFeed , Object: C:\Program Files\IIS\Microsoft Web Sites\Feed\
    MSI (s) (A4:64) [02:05:59:255]: PROPERTY CHANGE: Adding INSTALLLEVEL property. Its value is '1'.
    Action start 2:05:59: CostFinalize.
    MSI (s) (A4:64) [02:05:59:255]: Doing action: MigrateFeatureStates
    Action ended 2:05:59: CostFinalize. Return value 1.
    MSI (s) (A4:64) [02:05:59:255]: Skipping MigrateFeatureStates action: not run in maintenance mode
    Action start 2:05:59: MigrateFeatureStates.
    MSI (s) (A4:64) [02:05:59:255]: Doing action: InstallValidate
    Action ended 2:05:59: MigrateFeatureStates. Return value 0.
    MSI (s) (A4:64) [02:05:59:255]: PROPERTY CHANGE: Deleting MsiRestartManagerSessionKey property. Its current value is '511fc0c519f6f7459d8de9cdea06010a'.
    MSI (s) (A4:64) [02:05:59:271]: Feature: CommonFeature; Installed: Local;   Request: Null;   Action: Null
    MSI (s) (A4:64) [02:05:59:271]: Component: C_DiscoverabilityKey; Installed: Local;   Request: Null;   Action: Null
    MSI (s) (A4:64) [02:05:59:271]: Component: C_WebSitesSetupHelper.ps1; Installed: Local;   Request: Null;   Action: Null
    MSI (s) (A4:64) [02:05:59:271]: Component: C_WebSitesSetupHelperWrapper.ps1; Installed: Local;   Request: Null;   Action: Null
    MSI (s) (A4:64) [02:05:59:271]: Component: __C_DiscoverabilityKey65; Installed: Null;   Request: Null;   Action: Null
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: BindImage
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: ProgId
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: PublishComponent
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: SelfReg
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Extension
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Font
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Shortcut
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Class
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Icon
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: TypeLib
    Action start 2:05:59: InstallValidate.
    MSI (s) (A4:64) [02:05:59:271]: PROPERTY CHANGE: Modifying CostingComplete property. Its current value is '0'. Its new value: '1'.
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: BindImage
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: ProgId
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: PublishComponent
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: SelfReg
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Extension
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Font
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Shortcut
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Class
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: Icon
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: TypeLib
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2727 2: 
    MSI (s) (A4:64) [02:05:59:271]: Note: 1: 2205 2:  3: FilesInUse
    MSI (s) (A4:64) [02:05:59:287]: Note: 1: 2727 2: 
    MSI (s) (A4:64) [02:05:59:287]: Doing action: InstallInitialize
    Action ended 2:05:59: InstallValidate. Return value 1.
    MSI (s) (A4:64) [02:05:59:287]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (s) (A4:64) [02:05:59:287]: User policy value 'AlwaysInstallElevated' is 0
    MSI (s) (A4:64) [02:05:59:287]: BeginTransaction: Locking Server
    MSI (s) (A4:64) [02:05:59:302]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (A4:64) [02:05:59:302]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (A4:64) [02:05:59:302]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (A4:64) [02:05:59:302]: Server not locked: locking for product {7DE9D988-C892-43A6-884B-74A5008D6018}
    Action start 2:05:59: InstallInitialize.
    MSI (s) (A4:64) [02:05:59:552]: Doing action: RemoveExistingProducts
    Action ended 2:05:59: InstallInitialize. Return value 1.
    MSI (s) (A4:64) [02:05:59:552]: Skipping RemoveExistingProducts action: current configuration is maintenance mode or an uninstall
    Action start 2:05:59: RemoveExistingProducts.
    MSI (s) (A4:64) [02:05:59:552]: Doing action: ProcessComponents
    Action ended 2:05:59: RemoveExistingProducts. Return value 0.
    Action start 2:05:59: ProcessComponents.
    MSI (s) (A4:64) [02:05:59:552]: Doing action: UnpublishFeatures
    Action ended 2:05:59: ProcessComponents. Return value 1.
    Action start 2:05:59: UnpublishFeatures.
    MSI (s) (A4:64) [02:05:59:552]: Doing action: RemoveRegistryValues
    Action ended 2:05:59: UnpublishFeatures. Return value 1.
    Action start 2:05:59: RemoveRegistryValues.
    MSI (s) (A4:64) [02:05:59:552]: Doing action: RemoveFiles
    Action ended 2:05:59: RemoveRegistryValues. Return value 1.
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2205 2:  3: RemoveFile
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2205 2:  3: RemoveFile
    Action start 2:05:59: RemoveFiles.
    MSI (s) (A4:64) [02:05:59:552]: Doing action: InstallFiles
    Action ended 2:05:59: RemoveFiles. Return value 0.
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2205 2:  3: Patch
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2228 2:  3: Patch 4: SELECT `Patch`.`File_`, `Patch`.`Header`, `Patch`.`Attributes`, `Patch`.`Sequence`, `Patch`.`StreamRef_` FROM `Patch` WHERE `Patch`.`File_` = ? AND `Patch`.`#_MsiActive`=? ORDER BY `Patch`.`Sequence`
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2205 2:  3: Error
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2228 2:  3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1302
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2205 2:  3: MsiSFCBypass
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2228 2:  3: MsiSFCBypass 4: SELECT `File_` FROM `MsiSFCBypass` WHERE `File_` = ?
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2205 2:  3: MsiPatchHeaders
    MSI (s) (A4:64) [02:05:59:552]: Note: 1: 2228 2:  3: MsiPatchHeaders 4: SELECT `Header` FROM `MsiPatchHeaders` WHERE `StreamRef` = ?
    Action start 2:05:59: InstallFiles.
    MSI (s) (A4:64) [02:05:59:568]: Skipping action: CA_SET_PROPERTY_UPDATE_OFFLINE_FEED (condition is false)
    MSI (s) (A4:64) [02:05:59:568]: Skipping action: CA_UPDATE_OFFLINE_FEED (condition is false)
    MSI (s) (A4:64) [02:05:59:568]: Doing action: WriteRegistryValues
    Action ended 2:05:59: InstallFiles. Return value 1.
    Action start 2:05:59: WriteRegistryValues.
    MSI (s) (A4:64) [02:05:59:584]: Doing action: RegisterUser
    Action ended 2:05:59: WriteRegistryValues. Return value 1.
    Action start 2:05:59: RegisterUser.
    MSI (s) (A4:64) [02:05:59:584]: Doing action: RegisterProduct
    Action ended 2:05:59: RegisterUser. Return value 0.
    Action start 2:05:59: RegisterProduct.
    MSI (s) (A4:64) [02:05:59:599]: Doing action: PublishFeatures
    Action ended 2:05:59: RegisterProduct. Return value 1.
    Action start 2:05:59: PublishFeatures.
    MSI (s) (A4:64) [02:05:59:599]: Doing action: PublishProduct
    Action ended 2:05:59: PublishFeatures. Return value 1.
    Action start 2:05:59: PublishProduct.
    MSI (s) (A4:64) [02:05:59:599]: Resolving source.
    MSI (s) (A4:64) [02:05:59:599]: Resolving source to launched-from source.
    MSI (s) (A4:64) [02:05:59:599]: Setting launched-from source as last-used.
    MSI (s) (A4:64) [02:05:59:599]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\'.
    MSI (s) (A4:64) [02:05:59:599]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\'.
    MSI (s) (A4:64) [02:05:59:599]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{7DE9D988-C892-43A6-884B-74A5008D6018}'.
    MSI (s) (A4:64) [02:05:59:599]: SOURCEDIR ==> C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\
    MSI (s) (A4:64) [02:05:59:599]: SOURCEDIR product ==> {7DE9D988-C892-43A6-884B-74A5008D6018}
    MSI (s) (A4:64) [02:05:59:599]: Determining source type
    MSI (s) (A4:64) [02:05:59:599]: Source type from package 'WebSitesFeed.msi': 2
    MSI (s) (A4:64) [02:05:59:599]: Source path resolution complete. Dumping Directory table...
    MSI (s) (A4:64) [02:05:59:599]: Dir (source): Key: TARGETDIR , Object: C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\ , LongSubPath:
     , ShortSubPath:
    MSI (s) (A4:64) [02:05:59:599]: Dir (source): Key: WindowsFolder , Object: C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\ , LongSubPath:
     , ShortSubPath:
    MSI (s) (A4:64) [02:05:59:599]: Dir (source): Key: ProgramFiles64Folder , Object: C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\ ,
    LongSubPath: x64\ , ShortSubPath:
    MSI (s) (A4:64) [02:05:59:599]: Dir (source): Key: DIR_IIS , Object: C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\ , LongSubPath:
    x64\IIS\ , ShortSubPath:
    MSI (s) (A4:64) [02:05:59:599]: Dir (source): Key: DIR_WebSites , Object: C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\ , LongSubPath:
    x64\IIS\Microsoft Web Sites\ , ShortSubPath: x64\IIS\f-y7bkar\
    MSI (s) (A4:64) [02:05:59:615]: Dir (source): Key: DIR_WebSitesFeed , Object: C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\ , LongSubPath:
    x64\IIS\Microsoft Web Sites\Feed\ , ShortSubPath: x64\IIS\f-y7bkar\Feed\
    MSI (s) (A4:64) [02:05:59:615]: Doing action: InstallFinalize
    Action ended 2:05:59: PublishProduct. Return value 1.
    MSI (s) (A4:64) [02:05:59:630]: Running Script: C:\Windows\Installer\MSI963B.tmp
    MSI (s) (A4:64) [02:05:59:630]: PROPERTY CHANGE: Adding UpdateStarted property. Its value is '1'.
    MSI (s) (A4:64) [02:05:59:662]: Note: 1: 2265 2:  3: -2147287035
    MSI (s) (A4:64) [02:05:59:662]: Machine policy value 'DisableRollback' is 0
    MSI (s) (A4:64) [02:05:59:677]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (A4:64) [02:05:59:677]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1143083200,LangId=1033,Platform=589824,ScriptType=1,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
    Action start 2:05:59: InstallFinalize.
    MSI (s) (A4:64) [02:05:59:677]: Executing op: ProductInfo(ProductKey={7DE9D988-C892-43A6-884B-74A5008D6018},ProductName=Web Sites Local Feed,PackageName=WebSitesFeed.msi,Language=1033,Version=117778466,Assignment=1,ObsoleteArg=0,,,PackageCode={F8DA307E-FEA1-4E30-8764-A09F1C1B8271},,,InstanceType=0,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
    MSI (s) (A4:64) [02:05:59:677]: Executing op: DialogInfo(Type=0,Argument=1033)
    MSI (s) (A4:64) [02:05:59:677]: Executing op: DialogInfo(Type=1,Argument=Web Sites Local Feed)
    MSI (s) (A4:64) [02:05:59:677]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
    MSI (s) (A4:64) [02:05:59:693]: Executing op: SetBaseline(Baseline=0,)
    MSI (s) (A4:64) [02:05:59:693]: Executing op: SetBaseline(Baseline=1,)
    MSI (s) (A4:64) [02:05:59:693]: Executing op: ActionStart(Name=RegisterProduct,Description=Registering product,Template=[1])
    MSI (s) (A4:64) [02:05:59:693]: Executing op: UpdateEstimatedSize(EstimatedSize=0)
    MSI (s) (A4:64) [02:05:59:709]: Executing op: ProductCPDisplayInfoRegister()
    MSI (s) (A4:64) [02:05:59:724]: Executing op: ActionStart(Name=PublishProduct,Description=Publishing product information,)
    MSI (s) (A4:64) [02:05:59:724]: Executing op: CleanupConfigData()
    MSI (s) (A4:64) [02:05:59:724]: Executing op: RegisterPatchOrder(Continue=0,SequenceType=1,Remove=0)
    MSI (s) (A4:64) [02:05:59:724]: Executing op: SourceListRegisterLastUsed(SourceProduct={7DE9D988-C892-43A6-884B-74A5008D6018},LastUsedSource=C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\)
    MSI (s) (A4:64) [02:05:59:724]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (A4:64) [02:05:59:724]: Specifed source is already in a list.
    MSI (s) (A4:64) [02:05:59:724]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (A4:64) [02:05:59:724]: Adding new sources is allowed.
    MSI (s) (A4:64) [02:05:59:724]: Set LastUsedSource to: C:\Users\Administrator\AppData\Local\Microsoft\Web Platform Installer\installers\HostingPrimaryControllerBootstrapper_v2\8679DB5B824AE838ACFF0353D295F7353D721621\.
    MSI (s) (A4:64) [02:05:59:724]: Set LastUsedType to: n.
    MSI (s) (A4:64) [02:05:59:724]: Set LastUsedIndex to: 1.
    MSI (s) (A4:64) [02:05:59:724]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)
    MSI (s) (A4:64) [02:05:59:771]: Note: 1: 2265 2:  3: -2147287035
    MSI (s) (A4:64) [02:05:59:771]: User policy value 'DisableRollback' is 0
    MSI (s) (A4:64) [02:05:59:771]: Machine policy value 'DisableRollback' is 0
    MSI (s) (A4:64) [02:05:59:802]: Note: 1: 2265 2:  3: -2147287035
    MSI (s) (A4:64) [02:05:59:865]: Note: 1: 2318 2: 
    MSI (s) (A4:64) [02:05:59:865]: No System Restore sequence number for this installation.
    MSI (s) (A4:64) [02:05:59:865]: Unlocking Server
    MSI (s) (A4:64) [02:05:59:974]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
    Action ended 2:05:59: InstallFinalize. Return value 1.
    Action ended 2:05:59: INSTALL. Return value 1.
    MSI (s) (A4:64) [02:05:59:974]: Note: 1: 1728
    MSI (s) (A4:64) [02:05:59:974]: Note: 1: 2205 2:  3: Error
    MSI (s) (A4:64) [02:05:59:974]: Note: 1: 2228 2:  3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1728
    MSI (s) (A4:64) [02:05:59:974]: Note: 1: 2205 2:  3: Error
    MSI (s) (A4:64) [02:05:59:974]: Note: 1: 2228 2:  3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
    MSI (s) (A4:64) [02:05:59:974]: Product: Web Sites Local Feed -- Configuration completed successfully.
    MSI (s) (A4:64) [02:05:59:974]: Windows Installer reconfigured the product. Product Name: Web Sites Local Feed. Product Version: 7.5.10274.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
    MSI (s) (A4:64) [02:06:00:084]: Deferring clean up of packages/files, if any exist
    MSI (s) (A4:64) [02:06:00:084]: MainEngineThread is returning 0
    MSI (s) (A4:24) [02:06:00:084]: RESTART MANAGER: Session closed.
    MSI (s) (A4:24) [02:06:00:084]: No System Restore sequence number for this installation.
    === Logging stopped: 1/2/2014  2:05:59 ===
    MSI (s) (A4:24) [02:06:00:084]: User policy value 'DisableRollback' is 0
    MSI (s) (A4:24) [02:06:00:084]: Machine policy value 'DisableRollback' is 0
    MSI (s) (A4:24) [02:06:00:084]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (A4:24) [02:06:00:084]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (A4:24) [02:06:00:099]: Note: 1: 2265 2:  3: -2147287035
    MSI (s) (A4:24) [02:06:00:099]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (A4:24) [02:06:00:099]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (34:94) [02:06:00:099]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (34:94) [02:06:00:099]: MainEngineThread is returning 0
    === Verbose logging stopped: 1/2/2014  2:06:00 ===
    Please help me to sort out this problem.

    Please check in the log files from the following path: %ProgramFiles%\IIS\Microsoft Web Sites\Logs
    HostingPrimaryControllerBootstrapper_v2 entry from the feed will execute a couple of powershell scripts after installing WebsitesFeed.msi. The output of this commands are saved in the Logs folder.

  • Error Installing Windows 8.1 on SSD which is in place of macbook pro's SuperDrive

    I'm trying to install a regular copy of Windows 8.1 pro on an SSD on a Macbook Pro mid 2010. The SSD has been mounted replacing the old, unused SuperDrive with a support to add another disk.
    After starting the setup and formatting the disk to be ready for Windows 8.1 i press continue to start the actual setup but after few seconds an error 0xC0000005 appears. I've never had problems installing windows on this mac, now i'm completely puzzled.
    Thank you for your help

    okay, thanks!
    but I guess the bigger problem will be that the internal Superdrive is replaced and that there is not support for installing windows from an external optical drive if you had an internal drive before. Or am I false!?
    But I will try to install windows 7, may be this works! Do you know wheather the upgrade from win7 to win 8.1 is possible?

  • Boot camp error installing Windows 8.1 "An unexpected I/O error has occurred"

    Well, just like it says on the title, when im going to install windows 8.1 in my MBP (late 2011 13" i7) it gives me a blue screen and the message
    "RECOVERY
    There was a problem with a device connected to your PC
    An unexpected I/O error has occurred
    Error Code: 0x00000e9
    This problem can happen when a removable storage device is removed while it`s in use or is failing. Properly connecting any
    removable storage and restarting your PC may fix this problem."
    I dont have any peripherals connected to the MBP while restarting or booting windows installer....
    Anyone had this problem while installing Windows?
    Any tip of what to do??

    If you tried to install Windows 8.1 and it failed at 73% then Windows 7 is lost if you did not create recovery disks.
    Should you wish to install Windows 8.1 and you the Win 8.1 license key you could download and create a Windows 8.1 ISO and burn it to USB or DVD to reinstall on your computer.
    http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Error installing windows xp via bootcamp

    Hi guys,
    I just bought my macbook pro yesterday and I tried to install windows xp via bootcamp and after the installing it says "setup is starting windows" and then an error saying "session3initializationfailed" came out.
    I downloaded windows xp sp3 from my university and burn it into a disk.
    Can anybody tell me what's going on or what did i do wrong?
    Thanks

    Greetings Appelonians
    I am privileged to have attained a brand new Macbook Pro 2010. I am not completely new to Apple and have used 'boot camp' on my other iMac's have have owned previously. In the process of installing Windows XP on the new Macbook Pro, I came upon a few challenging errors, some I have solved, but others getting the best of me at them moment. I am going to run through my situation I am at the moment, starting with my initial challenge, the solutions I came up with and at last the cul de sac I am at the moment.
    The family of errors all evolved with me trying to install Windows XP on my Mac
    A) Windows on my Macbook
    1) I used Boot Camp to create a 50gm partition for Windows XP.
    2) I booted up with the WinXP Install CD (original)
    3) Deleted the Boot Camp Partition, recreating it and formatted it as NTFS.
    4) Rebooted and got my first error after choosing to have the Macbook reboot with the newly installed WinXP partition.
    Error
    Windows could not start because the following file is missing or corrupt:
    <windows_root>\System32\hal.dll
    Please re-install a copy of the above file.
    windows_root\System32\hal.dll missing or corrupt:
    Please re-install a copy of the above file.
    Windows could not start because of a computer disk hardware configuration problem.
    Could not read from the selected boot disk. Check boot path and disk hardware.
    Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information.
    Error Fix
    1) I used a Bootdisk created by BartPE and changed a line in the Boot.ini file. Apparently this issue is due to the fact that the Macbook Pro has a 200Mb partition, the Boot.ini refers incorrectly to the wrong partition when trying to complete the WinXP installation after rebooting.
    2) I changed the line in the Boot.ini that refers to the partition as 3 to 2 (see bold below):
    [quote][boot loader]
    timeout=30
    default=multi(0)disk(0)rdisk(0)partition(2)\WINDOW S
    [operating systems]
    multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Micro soft Windows XP Professional" /noexecute=optin /fastdetect [/quote]
    3) This fixed the issue and Windows started after the reboot, remember still that my WinXP installation is still incompete.
    B) Blue Screen of Death
    1) During the WinXP run screen, my second error popped up as one of the dreaded [URL="http://justasktheitguy.com/software/blue-screen-unmountablebootvolume-stop-0x000000ed-0xaaaaaaaa0xbbbbbbbb0xcccccccc0xdddddddd/"]Blue Screen of Death[/URL], as found at the mentioned link.
    2) It seems that this error is caused by a problem with an IDE cable or the BIOS in which case you just replace the cable or reload the fail-safe default settings in the BIOS. However, most of the time this error is caused by some sort of problem with the volume.
    3) I booted again with my boot disk and ran 'chkdsk -r' and there after 'fixboot' to fix any errors regarding the volume of the HDD. (Fix can be found at the above mentioned 'Blue Screen of Death' link.)
    4) Now I know that Mac does not use a BIOS but a EFI and this is where I am stuck.
    All I need is to get WinXP installed properly on my New Macbook Pro. I had no trouble installing WinXP on my other iMacs and this has been the first time I had this issue. I do own a copy of Parallels, but I would like to run WinXP on a seperate partition with the option of either booting up with WinXP as well as using WinXP as Virtual Machine in Snow Leopard.
    Hope some one out there can assist me, please.

  • Error installing Windows 7 on Macbook running snow leopard

    I've been trying to install Windows 7 on Macbook running snow leopard.  During the windows install, it goes through expanding the files and then fails with errors saying the installation files are corrupted.  I've gone back to boot camp assistant, and removed the partition, and then re-partitioned and still see the same issue. Has anyone seen this problem?

    Read the Boot Camp Instructions located here: http://www.apple.com/support/bootcamp/. You must use the same drive that contains OSX to install Windows using Boot Camp Assistant.
    The Boot Camp community is located here: https://discussions.apple.com/community/windows_software/boot_camp
    I've asked the moderators to move your post.

  • Error installing windows from Server 2012r2 / WDS

    Hi ! I get that error every time i trying to install windows 7 pro x64 CAPTUREIMAGE from Server 2012R2 standard .
    It says it couldnt progress answeringfile (specialize) Answeringfile setup cant use .Error occured when handling component (Microsoft Windows-Shell-Setup) .
    So i need to modified that image ? How? Is there tool for that ?
    Thanks Ari

    Hi Ari,
    Was your issue resolved?
    If no, please reply and tell us the current situation in order to provide further help.
    Meanwhile, tell us what method did you use to do the deployment? And then help us collect the related log file. You could find them in the following path:
    Please upload the log file in order to analyze. You could find it from this path:
    %WINDIR%\Panther\setupact.log
    %WINDIR%\Panther\setuperr.log
    %WINDIR%\Panther\UnattendGC
    To collect logs, we have two methods in forum:
    If you concern personal information or company related information in logs, we recommend to send log files to our forum email account:
    [email protected]
    For dump file or other logs which do not contain the sensitive information, you can still use OneDrive to share them so that other community members can also provide help in analysis.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Error installing windows 8.1

    I brought Today an HP 250g3. I load it with windows 7 pro.
    In the box there were 2 DVD of windows 8.1. I put it in and load it. At the 73% of the procedure i have the error
    Reducer
    Copy file fails
    From:E:\PRELOAD\BASE16.SWM
    To:C:\RM\Image\BASE16.SWM
    Press OK to retry
    I retried a lot, but at the end I shut it down with the power botton. If i don't put the dvd in, it says that there is no boot device, so my new laptop is useless. Can someone help me...PLEASE???

    If you tried to install Windows 8.1 and it failed at 73% then Windows 7 is lost if you did not create recovery disks.
    Should you wish to install Windows 8.1 and you the Win 8.1 license key you could download and create a Windows 8.1 ISO and burn it to USB or DVD to reinstall on your computer.
    http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Select CD-ROM Boot Type Error installing Windows 7 in Boot Camp walkthrough

    Much thanks to John Anderson at AndersonHatch.com for his excellent
    walkthrough for installing Windows 7 x64 in Boot Camp.
    Since his post there has been an update to ImgBurn which adds a few
    screens and dialogues whose proper navigation may not be obvious. He
    also left out a few choices that SHOULD be obvious but you know how
    THAT goes.
    Here then, cribbing liberally (plagiarizing, actually) from John's
    walkthrough, but including some "for idiots" footnotes (which are
    more for my own benefit than yours), is the most current (as of March,
    2010) walkthrough, which presumes you have a DVD of Win7 (if you
    downloaded an iso file from somewhere I'm sure the instructions are
    similar but I'm not exactly sure how. Perhaps someone can add a
    comment with this variation?)
    ON A WINDOWS MACHINE:
    1: Download and install ImgBurn.exe from the cloud.
    2: Insert your Windows 7 Install DVD, preferably into your
    ---DVD-ROM drive but if possible into an orifice of whomever is
    ---responsible for ordinary shmoes like you and me having to spend an
    ---entire day Googling this problem and then following a simple
    ---27-step procedure to do the most basic thing you can do on a computer
    ---which is to install an OS. This is before we can even use the computer
    ---to do anything useful which at this point is a dubious prospect. But I
    ---digress...
    3: Extract your boot image as follows:
    ---a. Using ImgBurn, go to "Build" mode. All fields should be blank at
    -----this point.
    ---b. Select the "Advanced" tab.
    ---c. Select the "Bootable Disc" tab
    ---d. In the dropdown under "Extract boot Image" select your DVD drive
    -----and then click on the the little disk icon to the right of the
    -----dropdown. A "Save As" window opens. Choose a location on your hard
    -----drive to save to and keep the filename "BootImage" and click "Save."
    -----This operation only takes a few seconds. ImgBurn presents a dialogue
    -----box upon success.
    ---e. When it asks if you would you like to use the boot image file in
    -----your current project say "Yes."
    4: Add your disk to your new disc image
    ---a. On the left side of the ImgBurn window in the "Source" panel
    -----click the little folder icon (second down from the plus sign)
    -----and browse to select your Windows 7 Install DVD (Just select
    -----the entire drive, no files or folders inside it). Hit OK.
    ---b. Select the "Options" tab on the right. Data Type: MODE1/2048.
    -----File System: ISO9660. UDF Revision 1.02.
    ---c. Only the "Recursive Subdirectories" checkbox should be checked.
    ---d. Select the "Advanced" tab again.
    ---e. Select the "Restrictions" tab
    ---f. Select “Level X – 219 Characters”
    ---g. Select "Standard" character set.
    ---h. Select only the following checkboxes:
    -----Allow More Than 8 Directory Levels
    -----Allow More Than 255 Characters In Path
    -----Allow Files Without Extensions
    -----Don't Add ';1: Version Number To Tiles
    ---i. Select the “Bootable Disc” tab again. Make sure “Make image
    -----bootable” is checked.
    ---j. Select "Emulation Type: None (Custom)" in dropdown.
    ---k. The "Boot Image" (which should already be filled in if you said
    -----"Yes" in 3e) should be a path to the file "BootImage.ima." If not,
    -----select the BootImage.ima file you created in Step 3.
    ---l. Load Segment: 07C0
    ---m. Sectors to Load: 8
    5: Build your new iso.
    ---a. Under "Extract Boot Image" select your DVD-ROM drive again.
    ---b. Enter a name for your new iso on the left under "Destination."
    -----Use the folder icon to the right of the dropdown, or enter a
    -----filename manually. You can call it anything. I called mine "New7."
    -----Make sure you are saving it to your hard drive, not back to the
    -----DVD-ROM drive.
    ---c. The "Source" field in the upper left should be blank but the
    -----directory is "D/:' I know this is confusing but trust me.
    ---d. Click the big folder pointing at a disc document icon at the
    -----bottom left to create your new image! This operation may take
    -----a few more minutes of your precious life. Oh well, there's plenty
    -----where those came from...
    ---e. Here is where ImgBurn gets way too helpful. Decline its offer to
    -----change the setting from "UDF" to ISO9660 + UDF." Just say "No."
    ---f. Laugh at the politically correct dialogue for "Confirm Volume
    -----Label" and click "Yes" or just wait 30 seconds for the
    -----programming gremlin to do it for you.
    ---g. Click "OK" for the useless (to non-propellerheads) "File,
    -----Content, and Data" info dialogue box (but thank you ImgBurn!)
    6: Burn your new iso.
    ---a. Go to burn mode, baby.
    ---b. Select the iso file you created in 5b.
    ---c. Remove your Windows 7 Install DVD and insert a blank DVD,
    -----preferably into your DVD-ROM drive but...
    ---d. Select your destination blank DVD and click the "Burn" button.
    If you have ADHD like me you can skip the "Verify" cycle (the disk is
    probably fine) and use it to install Windows 7 x64 on your Mac and
    return to your regularly scheduled life.
    Enjoy!

    You cannot stuff a UEFI into an EFI32 ROM, there isn't room; EFI32 is 2005-2008; UEFI 2.x was the first to support 64-bit.
    Apple does have an article on which Macs DON'T support 64-bit Windows (I think it actually just says my Mac Pro 2006 doesn't support Windows 7, which of course I am running! But had extra hoops.
    It is possible to install Windows 7 32-bit on one drive, then boot into that, and install Windows 7 64-bit ON A SEPARATE drive or partition (my mac has 4 internal drives). Else, you get into 'triple boot' and the pitfalls and problems.
    Technology changes and you can't always go back. Even having a 64-bit processor is only part of the equation.

  • Error Installing Windows XP

    Hi Guys,
    My apologies for asking, I have tried searching but cant find anything relevant.
    I have ran the bootcamp assistant in OS X, computer has reset and the installer seems to crash, doesn't do anything so I have to turn off the laptop and back on, if the installer tries to continue it gets stuck at the same place again.
    The part of the installation it gets stuck is "Inspecting your computer's hardware configuration"
    Please help.
    Dan
    I'm trying to install Windows XP Service Pack 3 on OS X 10.6.7 - Macbook Pro 2011

    Hi,
    the 2011 MacBook Pros no longer support Windows XP or Vista.
    Only Windows 7 is supported.
    http://support.apple.com/kb/HT4410
    Sorry
    Stefan

  • Error installing windows 7 on macbook early 2011

    Hie
    I was installing windows 7 on the 2nd partition of my hard drive on macbook pro early 2011 from dvd
    The installation process started well nd at end it asked me for restart for completion of windows installation
    Macbook got restart but got boot in mac os instead of windows
    So the completion was incomplete
    I restarted it again and holding option key boot in windows but now it just shows a blank screen with hyphen blinking till I hard restart it
    If I install windows again the same problem will occur when it will ask for restart for completion
    What should I do?

    Read the Boot Camp Instructions located here: http://www.apple.com/support/bootcamp/. You must use the same drive that contains OSX to install Windows using Boot Camp Assistant.
    The Boot Camp community is located here: https://discussions.apple.com/community/windows_software/boot_camp
    I've asked the moderators to move your post.

  • Error installing windows 7 on partition with Bootcamp.

    I'm having issues when I try and istall Windows 7 using bootcamp on my Macbook Pro 15' Retina Late-2013.
    I am able to create the USB Key with Windows 64-bit and Support files from apple with no issues. For this, I'm using a ScanDisk Extreme 32Gb USB 3.0.
    So after creating the Key/Install Drive for Windows and the computer boots using the Flashdrive for installing windows, I get until the following step:
    I am able to "Format" the Bootcamp partition (Parition 4) but when I try and select the partition for installing Windows, I get this:
    I tried doing this mutiple times, earasing the bootcamp installation and starting over, re-downloading the files. I even tried to use an other Win7 ISO files from before Win7 SP1 but with no luck. I did also try to "Delete" the partition and then create a "New" partition from the unallocated space but that didn't work.
    Any advice?

    So, I went ahead and contaced apple.
    It was not a pleasent experiance, I kept being bounced around diffrent support people; each time having to re-explain my problem, While they where all pretty friendly and somewhat helpful, they couldn't help me. I was therefore promoted to a "Senior Advisor", I rejoiced at the idea of this. After explaining my problem in depth and going throught everything I had done, she suggested I check out this other article posted on the Support Forums.
    She sent me to this: https://discussions.apple.com/message/23756557#23756557
    Which sends you to this: https://discussions.apple.com/thread/5488789?tstart=0
    However, after following the somewhat unclear instructions on those discussions, I was completly unable to start up my bootcamp; I kept getting "Application has Crashed".
    And here I am, back to square one.

  • Build error installing windows version of swfinvestigator

    I am getting the following error when installing the latest version of swfinvestigator.  I have updated to the latest version of adobe air, is there anything else I need to do to install this software.

    Only if you're running Windows in Boot Camp or by a virtualiser (Parallels, VMWare, VirtualBox).

Maybe you are looking for

  • To add condition on which distribution model MATMAS should be sent

    Hello All, I have to send MATMAS Idoc to XI. But in R/3 there 2 distribution models created one for XI and other for some R/# system. I have created a custom report of MASTERIDOC_CREATE_SMD_MATMAS to handle specific conditions. Now I want to send to

  • Footer information not repeating under for-each

    Hello, I am trying to customize Loan Statement to show the first as summary and the rest for the details for each loan. I need to print Payment information and Bar Code at detail level for each loan. In order to control the position of the bar code,

  • Can we write Spel Language Programatically

    Hi All Is it possible to write Spel Language Programatically ? For example , Can I have a code that reads as follows ? Line 1 : OAMessageTextInputBean descBean = (OAMessageTextInputBean)webBean.findChildRecursive("Description"); Line 2: descBean.setR

  • 10 most needed iMovie 8 Features

    1. Fast/Slow for Video clips 2. Fade in/out Audio for Video and audio clips 3. Adjustable audio volume with keystones 4. ViV overlay with transparency adjustments or 2 Video channels 5. PiP overlay with transparency adjustments 6. Import/Export proje

  • Add file or .pdf to event

    Why can't I add a .pdf to an event? Like have the schedule for a meeting be entered into the Event? Or a .doc that has the directions to get into a building so I can have it with the actual Event? Or an e-mail, or anything? One post said that I shoul