Error: Invalid byte 2 of 3-byte UTF-8 sequence

Hi Experts,
We have a synchronous scenario from Websphere to PI, where once Websphere sends the request it is been executed by ABAP proxy and gives response with some special characters. But as the xml coding is in UTF-8 only, this is not throwing error in Response Mapping.
But when it reaches the end system, it is giving this "Invalid byte 2 of 3-byte UTF-8 sequence." " error saying that enocoding to UTF-8 is not done correctly. How can I overcome this situtation. please suggest.
Thanks,
Anudeep

Hi,
Check the encoding to be used for the data..or else check whether the RFC connections used are set to unicode...
if possible execute the request in SAP and check what is the output it is generating...if it is proper over there then you need to identify the encoding to be used when it comes to PI..
HTH
Rajesh

Similar Messages

AUSST - Update Server issue: IIS7 406 errors, and ERROR: Invalid webfeed

I spent today configuring and installing an instance of the AUSST2.0 software, following http://www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Up dateServerSetupTool_TechNote.pdf
Here's where I am:
Via Firefox/IE I get the following when browsing to the Updaterfeed.xml:
XML Parsing Error: syntax error
Location: <SERVER LOCATION>
Line Number 1, Column 1:
0001
^
Which I expect is ok... the server is sending the updaterfeed.xml. I can also download the updates directly through IE or Firefox. The corresponding entry in the IIS log is:
/AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml - 80 - <MY IP ADDRESS> Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:9.0.1)+Gecko/20100101+Firefox/ 9.0.1 304 0 0 196
When I attempt to do an update via Photoshop, I receive:
"The update server is not responding. The server might be offline temporarily, or the internet or firewall settings may be incorrect. Please try again later. Error Code: U41M1C213 "
This happens regardless of firewall status locally or on the server. Other communication to the server is fine.
the aamu.log on level 10 says:
2012-01-17T20:01:52: Entering slurpURL: (http://<SERVER IP>/AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml) bytesPushed
2012-01-17T20:01:52: main download loop - waiting for network availability
2012-01-17T20:01:52: have network connection
2012-01-17T20:01:52: connected to: = http://<SERVER IP>/AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml
2012-01-17T20:01:52: received status code from server
2012-01-17T20:01:52: slurpURL: (http://<SERVER IP>/AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml) bytesPushed = 0
2012-01-17T20:01:52: CFU(Webfeed): dumping webfeed: C:\Users\<MY USERID>\AppData\Local\Adobe\AAMUpdater\1.0\Data\webfeed.xml
2012-01-17T20:01:52: CFU(Webfeed): ERROR: Invalid webfeed. Could not read webfeed sequence number.
2012-01-17T20:01:52: UCGetprogress : (B) Returning with value = 1
2012-01-17T20:01:52: UCGetprogress : Check for updates returning state for reffId =
2012-01-17T20:01:52: UCGetprogress : Check for updates returning state     = 41
2012-01-17T20:01:52: UCGetprogress : Check for updates returning outError = 213
2012-01-17T20:01:52: UCGetprogress : Check for updates returning percent   = 0
2012-01-17T20:01:52: UCGetprogress : Check for updates returning unique error code string   = U41M1C213
2012-01-17T20:01:52: UCGetprogress : (D) Returning with value = 1
2012-01-17T20:01:52: Stepped into << UCGetUserPreferences >> call.
2012-01-17T20:01:52: Returning from << UCGetUserPreferences >> call with return value - = 1
The subsequent IIS Log entry for this is:
GET /AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml - 80 - <MY IP ADDRESS> AAM+Updater+1.0 406 0 0 19
I've added the <add name=”SSINC-xml” path=”*.xml” verb=”*” modules=”ServerSideIncludeModule” resourceType=”Unspecified”> to my web.config, per http://blogs.adobe.com/oobe/2010/09/enterprise-in-house-update-hosting -for-cs5.html
I continue to get the U41M1C213 error whilst updating. I can get the updates when I remove the AdobeUpdater.Overrides from C:\ProgramData\Adobe\AAMUpdater\1.0 (Win7)
Help?

I was directed here by another adobe employee.   http://forums.adobe.com/thread/950769
I'll try again.... here is the current thread. http://forums.adobe.com/thread/951039

ASDOC error : Invalid byte 2 of 3-byte UTF-8 sequence

Hi everyone,
I'm trying to use ASDOC and have some problems.
1) The first and most anoying one is that I don't have the
complete documentation generated for MXML files : the files appear
in the documentation, but the description is empty. I however
commented them correctly using /** */ in the <mx:Script> tag,
but none of my methods appear... I just see the Events when
declared as class metadata.
2) I'm using Eric Feminella's ASDocAntTask and I experience a
strange error message : Impossible to open the document, Invalid
byte 2 of 3-byte UTF-8 sequence. It happens for a whole bunch of
files in the asdoc/templates directory, including the
asdoc-util.xsl file. Maybe this is the reason why point 1) appears
3) The Index html files are not generated... Consequence of
point 2) I guess
4) I have a warning message (oddly appearing 4 times) : CSS
type selectors are not supported in components. I know it's not
possible to have a link to my CSS file in components. But my file
declaration is in the <mx:Application> class...
Thanks for your help, all these errors really put me in
trouble as I must deliver the documentation soon...
Thanks
Edit : the complete list of files impossible to read is the
following :
asdoc-util.xsl
package.xsl
all-index.xsl
class-list.xsl
package-detail.xsl
class-files.xsl
Ben

Hi again !
I finally found how to (partially) solve my problem !
In ASDocAntTask, there are two files the user has to fill in
: the build.xml file and a properties file. In the properties file,
you define, for example, the name that you want to appear in the
browser window... And as my project is French, I used a French
special character é... which messed everything up...
So finally, I got rid of this problem and solved points 2)
and 3)
I have now a great documentation, but still nothing about
mxml files !
How can I solve this problem ?

Invalid byte 2 of 3-byte UTF-8 sequence error

I'm writing a java program that accesses an XML file and do some computation on it. The problem is that the program works on small sample XML files, but when trying to work with big XML files (which was generated by other program) I get "Invalid byte 2 of 3-byte UTF-8 sequence" parsing error. Any tips?

Hi,
Check the encoding to be used for the data..or else check whether the RFC connections used are set to unicode...
if possible execute the request in SAP and check what is the output it is generating...if it is proper over there then you need to identify the encoding to be used when it comes to PI..
HTH
Rajesh

Java.io.UTFDataFormatException: Invalid byte 1 of 1-byte UTF-8 sequence.

Hi,
I see the below error when I try to import bunch of email templates.
com.waveset.util.WavesetException: ==> java.io.UTFDataFormatException: Invalid byte 1 of 1-byte UTF-8 sequence.
Can any one explain me why is this happenining?
Thanks,
Siddiqui

Hi Siddiqui,
It looks like u r importing some characters those are not valid UTF-8 character set and some time this type of error comes when u try to import characters like *<,>* so use *& lt;* for < and *>* for >.
sorry those Characters r not display properly :-(
Thanx
Shant
Edited by: Shant on Jan 18, 2008 6:19 AM
Edited by: Shant on Jan 18, 2008 6:23 AM

"Invalid byte 1 of 1-byte UTF-8 sequence" exception trying to display image

Hi there!
Last night I updated my project to open the <wellcome-file>. So I put this in my web.xml file:
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns="http://java.sun.com/xml/ns/javaee"
    xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
    id="WebApp_ID"
    version="2.5">
<context-param>
    <param-name>javax.faces.DEFAULT_SUFFIX</param-name>
    <param-value>.jspx</param-value>
</context-param>
<welcome-file-list>
    <welcome-file>faces/login.jspx</welcome-file>
</welcome-file-list>
<servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
</servlet-mapping>
[...]Now when I type http://localhost:8080/myproject the login.jspx is opened as expected.
But after this change, exceptions started to shown when images from my template.jspx is loaded (?).
Here's a piece of my template.jspx:
<?xml version="1.0" encoding="ISO-8859-1"?>
<jsp:root
     xmlns:jsp="http://java.sun.com/JSP/Page"
     xmlns:h="http://java.sun.com/jsf/html"
     xmlns:f="http://java.sun.com/jsf/core"
     xmlns:ui="http://java.sun.com/jsf/facelets"
     xmlns:r="http://richfaces.org/rich"
     xmlns:a4j="http://richfaces.org/a4j"
     version="2.0">
<f:facet name="controls">
     <h:panelGroup>
          <h:graphicImage
               value="../imagens/erro.png"
               id="hidelink" />
     </h:panelGroup>
</f:facet>
[...]And here is the exception:
SEVERE: Error Rendering View[/imagens/erro.png]
com.sun.org.apache.xerces.internal.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.
     at com.sun.org.apache.xerces.internal.impl.io.UTF8Reader.invalidByte(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.io.UTF8Reader.read(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLEntityScanner.load(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLEntityScanner.arrangeCapacity(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLEntityScanner.skipString(Unknown Source)
     at com.sun.org.apache.xerces.internal.impl.XMLVersionDetector.determineDocVersion(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
     at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
[...]And, of course, the image is not displayed.
The images from pages that uses template.jspx works fine (even the same image that causes the exception).
Only images from my template.jspx and pages that I use with <ui:include> throws the exception.
My directory structure:
web
|___templates
|___imagens
|___pages
login.jspxI tried with ISO-8859-1 and UTF-8 as encoding and the problem is the same.
I need some help. Any help.
If any more info is needed, please just ask me.
Thank you in advace!
I'm using:
JSF 1.2; Facelets 1.1.14; Richfaces 3.3; Tomcat 6, Java 6
Yoshimit

I got the same error. It was because my application's .java files were saved as UTF-8 but the .xhtml files were saved as cp1255 encoding. I have also added a filter to set the charset to each response like described [here |http://www.coderanch.com/t/211549/JSF/java/JSF-Character-Sets-UTF-mainly] .
PS: I had another error after that which was caused by copying the Richfaces xmlns definitions from a PDf provided by Refcardz. The " symbol turend to something that the SAX parser could not process.
Hope this helps.
Pavel Myshkin

BaseRuntimeException:Invalid byte 1 of 1-byte UTF-8 sequence

Hi experts,
I am getting error in MONI as :
Runtime exception occurred during application mapping com/sap/xi/tf/_MM_MES_TO_SAP_SHIPPING_REQ2_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Invalid byte 1 of 1-byte UTF-8 sequence
When i checked the payload i found :
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'file:///C:/Documents and Settings/snayak/Local S...
<ns0:SalesOrderInformation>
But when I copy and paste the payload data from note pad and did testing in Messsage mapping, it became successful.
It is not opening in xml format but it is working in notepad.
Please advise what to do.
Thanks,
Swapnashree

Hi,
Stefan is correct. If you are unable to display it, then it is not a valid xml. Based on the error that you provided, the invalid character is located just above the <ns0:SalesOrderInformation>. So you should start from there.
But when I copy and paste the payload data from note pad and did testing in Messsage mapping, it became successful.
It is possible that you just selected a part of the payload and pasted it in the mapping, hence it was successful. Pasting the whole payload would more or less give the same error as what you have seen in moni.
If you can have your input XML validated by XML programs such as XMLSpy or XMLStudio, it would greatly help in troubleshooting your issue.
Hope this helps,
Mark

Invalid byte 2 of 2-byte UTF-8 sequence

Hi everyone.
I am trying to schedule a BI Publisher report using the PublicReportService web service.
When I call the web service, I get the following error
Invalid byte 2 of 2-byte UTF-8 sequence.
I think the cause of the error is that one of the parameters has special characters (Ñ). Please look at the parameters section of the XML
<parameterNameValues>
<item>
<name>P_CDEMPCSC</name>
<multiValuesAllowed>false</multiValuesAllowed>
<values>
<string>15</string>
</values>
</item>
<item>
<name>P_CDPERMES</name>
<multiValuesAllowed>false</multiValuesAllowed>
<values>
<string>01062011</string>
</values>
</item>
<item>
<name>P_DSEMPCSC</name>
<multiValuesAllowed>false</multiValuesAllowed>
<values>
_<string>DISEÑO Y CONSTRUCCION</string>_
</values>
</item>
</parameterNameValues>
¿Am I right about tha cause of the error?
¿How could I fix it? There is not an option for me to substitute the Ñ.
Thans in advance

Hi again.
I've found the solution to this issue
1.- The XML needs this line at the beginning
'<?xml version="1.0" encoding="ISO-8859-1" ?>'
If not, it is encoded by default as UTF-8, and apparently that's why some special characters like Ñ and é produce the error
2.- In case of some parameter has an &, this character needs to be replaced by the expression &.
Bye.

Invalid byte 2 of 3-byte UTF-8 sequence.

Hi All
I have to read a xml file from a given URL, which consists some french characters in it. I am getting
IOException :Invalid byte 2 of 3-byte UTF-8 sequence Exception.
The code i am using is.
SAXBuilder builder = new SAXBuilder();
Document doc = builder.build(new URL(url));
Thanks in Advance
Amit Srivastava

The original XML may have been coded in UTF-16, but then you have this code:xml.trim().getBytes()which says
"Take that XML string and convert it to bytes, using my system's default encoding."
The parser then attempts to parse those bytes, which are encoded in ISO-8859-1 or windows-1252 or some such. Since you didn't declare this fact in the XML's header, the parser assumes the bytes are encoded in UTF-8. When it comes to a sequence of bytes in the code that aren't valid UTF-8 encodings of anything then it complains.
If you really have to convert the input to bytes then try this:xml.trim().getBytes("UTF-8")

Org.dom4j.DocumentException: Invalid byte 1 of 1-byte UTF-8 sequence. Neste

Hi there,
I'm getting following exception, when i try to parse xml containing french character like
la valeur utilisée pour le paramètre ROWS est passée de 10000 à 5418*
org.dom4j.DocumentException: Invalid byte 1 of 1-byte UTF-8 sequence. Nested exception: Invalid byte 1 of 1-byte UTF-8 sequence.
     at org.dom4j.io.SAXReader.read(SAXReader.java:353)
     at org.dom4j.io.SAXReader.read(SAXReader.java:264)
     at com.azure.sparkcommon.XMLHelper.loadDocument(XMLHelper.java:57)
     at com.test.Sample.main(Sample.java:41)
Nested exception:
java.io.UTFDataFormatException: Invalid byte 1 of 1-byte UTF-8 sequence.
     at org.apache.xerces.impl.io.UTF8Reader.invalidByte(Unknown Source)
     at org.apache.xerces.impl.io.UTF8Reader.read(Unknown Source)
     at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)
     at org.apache.xerces.impl.XMLEntityScanner.scanLiteral(Unknown Source)
     at org.apache.xerces.impl.XMLScanner.scanAttributeValue(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanAttribute(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.dom4j.io.SAXReader.read(SAXReader.java:334)
     at org.dom4j.io.SAXReader.read(SAXReader.java:264)
     at com.azure.sparkcommon.XMLHelper.loadDocument(XMLHelper.java:57)
     at com.test.Sample.main(Sample.java:41)
Nested exception: java.io.UTFDataFormatException: Invalid byte 1 of 1-byte UTF-8 sequence.
     at org.apache.xerces.impl.io.UTF8Reader.invalidByte(Unknown Source)
     at org.apache.xerces.impl.io.UTF8Reader.read(Unknown Source)
     at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)
     at org.apache.xerces.impl.XMLEntityScanner.scanLiteral(Unknown Source)
     at org.apache.xerces.impl.XMLScanner.scanAttributeValue(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanAttribute(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.dom4j.io.SAXReader.read(SAXReader.java:334)
     at org.dom4j.io.SAXReader.read(SAXReader.java:264)
     at com.test.XMLHelper.loadDocument(XMLHelper.java:57)
     at com.test.Sample.main(Sample.java:41)
Can any body help me out.
Thanks,
S

Hey...
I got the solution..... it's all because of charset UTF-8 used in xml doctype/CharEncoding, As my JVM is running on OS for French locale i need to make use of 'ISO-8859-1' as CharEncoding.
This resolved my problem.
Anyways thanks.
Sid
Edited by: hiremath47 on May 20, 2010 5:48 PM

Invalid byte 1 of 1 byte utf 8 sequence(BI Mobile 4.0)

hi..
i want to try open a report from my ipad..
in the report the only prompt is the day.
but when i try the refresh report i see "invalid byte 1 of 1 byte utf 8 sequence"
so i cant refresh report..
what can i do..
thanks in advance.

The problem is in the file format. I do not know exact solution for this since I'm not familiar with BI Mobile 4.0. The report you try to open is really not in UTF-8 format. I would quess it is in ISO-8859-1 or similar format so you need to change this into the UTF-8 format somehow.
Edited by: Mika Karvonen on Sep 15, 2011 2:27 PM

Error inserting XML records 4000 bytes through Pro*C

Hi,
I am seeing the following error while trying to insert XML records > 4000 bytes (Records < 4000 bytes get inserted without any issues). Any help in resolving the issue would be highly appreciated.
ORA return text: ORA-01461: can bind a LONG value only for insert into a LONG column.
I am also able to insert records > 4000 bytes using the following query, But, I want to insert the records through a C application (using Pro*C) that is not running on the database server.
INSERT INTO MY_XML_TABLE
VALUES (XMLType(bfilename('XML_DIR', 'MY_FILE.XML'),
nls_charset_id('AL32UTF8')));
Oracle Version
===============
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Solaris: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Pro*C/C++ version:
====================
Pro*C/C++ RELEASE 11.2.0.0.0 - PRODUCTION
Schema registration:
====================
begin
DBMS_XMLSCHEMA.registerSchema (
SCHEMAURL => 'MY_XML_SCHEMA.xsd',
SCHEMADOC => bfilename ('ENG_REPORTS', 'MY_XML_SCHEMA.xsd'),
GENTYPES => FALSE,
OPTIONS => DBMS_XMLSCHEMA.REGISTER_BINARYXML,
CSID =>nls_charset_id ('AL32UTF8'));
end;
Table creation
===============
CREATE TABLE MY_XML_TABLE (
MY_XML_RECORD XmlType )
XMLTYPE MY_XML_RECORD STORE AS BINARY XML
XMLSCHEMA "MY_XML_SCHEMA.xsd" ELEMENT "MYXMLTAG" ;
Record Insertion (Pro*C generated code):
=========================================
/* EXEC SQL FOR :l_sizeof_array_togo
insert INTO MY_XML_TABLE
(MY_XML_RECORD )
VALUES( XMLTYPE(:l_XML_ptr INDICATOR :l_XML_indicators )); */
struct sqlexd sqlstm;
sqlstm.sqlvsn = 12;
sqlstm.arrsiz = 1;
sqlstm.sqladtp = &sqladt;
sqlstm.sqltdsp = &sqltds;
sqlstm.stmt = "insert into MY_XML_TABLE (MY_XML_RECORD) values (XMLTYPE(:s1\
:s2 ))";
sqlstm.iters = (unsigned int )l_sizeof_array_togo;
sqlstm.offset = (unsigned int )20;
sqlstm.cud = sqlcud0;
sqlstm.sqlest = (unsigned char *)&sqlca;
sqlstm.sqlety = (unsigned short)4352;
sqlstm.occurs = (unsigned int )0;
sqlstm.sqhstv[0] = (unsigned char *)&l_XML_ptr->xml_record;
sqlstm.sqhstl[0] = (unsigned long )8002;
sqlstm.sqhsts[0] = ( int )sizeof(struct xml_rec_definition);
sqlstm.sqindv[0] = ( short *)&l_XML_indicators->XML_record_ind;
sqlstm.sqinds[0] = ( int )sizeof(struct XML_indicator);
sqlstm.sqharm[0] = (unsigned long )0;
sqlstm.sqadto[0] = (unsigned short )0;
sqlstm.sqtdso[0] = (unsigned short )0;
sqlstm.sqphsv = sqlstm.sqhstv;
sqlstm.sqphsl = sqlstm.sqhstl;
sqlstm.sqphss = sqlstm.sqhsts;
sqlstm.sqpind = sqlstm.sqindv;
sqlstm.sqpins = sqlstm.sqinds;
sqlstm.sqparm = sqlstm.sqharm;
sqlstm.sqparc = sqlstm.sqharc;
sqlstm.sqpadto = sqlstm.sqadto;
sqlstm.sqptdso = sqlstm.sqtdso;
sqlcxt((void **)0, &sqlctx, &sqlstm, &sqlfpn);
}

After selecting data from xmltab table I just received first line of xmldata file. i.e
<?xml version="1.0" encoding="WINDOWS-12 52"?> <BAROutboundXM L xmlns="http://BARO
That must be a display issue.
What client tool are you using, and what version?
If SQL*Plus, you won't see the whole content unless you set some options :
{code}
SET LONG <value>
SET LONGCHUNKSIZE <value>
{code}
Could you try the following?
{code}
SET LONG 10000
SELECT t.object_value.getclobval() FROM xmltab t;
-- to force pretty-printing :
SELECT extract(t.object_value, '/*').getclobval() FROM xmltab t;
{code}
Edited by: odie_63 on 16 févr. 2011 08:58

Solution for Visual composer error: 32k span and 64k byte limit

Dear friends,
I am getting the error in visual composer 32k span and 64k byte limit since last half year,
some time error will get resolved by adding layer in to model OR adding some table and form to model OR reduce the animation effect OR even by doing tab strip view for layer model, doing nested ivew.
but this solution not usefull for every time.
what should we do for this error(32k span and 64k byte limit),
is it solved by updating EP version or by EP java stack or any other updates which will solve the This VC error.
64k error i am getting is:
+Error in compiling Flex application: Error: A function in the code exceeds the 64K byte limit (actual size = '65570'). Since the problem occurs in the compiler-generated deferred instantiation code, please refactor/componentize portions of this document.
(/usr/sap/IBD/DVEBMGS10/j2ee/cluster/server0/GUIMachine_Business_Packages/Managment_cockpit11_31066/FLEX_COMPILATION_FOLEDR/AADCDM.mxml:19)
Failed to compile AADCDM.mxml+
hope to get answer form you,
Thanks and Regards,
Dushyant.

Hi,
I think it's better to post this question into the Visual Composer forum. Anyway, the 32k/64k bug is solved with the flex2 server which is already released.
Also have a look into the [Wiki page|https://wiki.sdn.sap.com/wiki/display/VC/64Kbytelimit].
Hope that helps!
Best Regards,
Marcel

ConvertToClob and byte order mark for UTF-8

We are converting a blob to a clob. The blob contains the utf-8 byte representation (including the 3-byte byte order mark) of an xml-document. The clob is then passed as parameter to xmlparser.parseClob. This works when the database character set is AL32UTF8, but on a database with character set WE8ISO8859P1 the clob contains an '¿' before the '<'AL32UTF8');
I would assume that the ConvertToClob function would understand the byte order mark for UTF-8 in the blob and not include any parts of it in the clob. The byte order mark for UTF-8 consists of the byte sequence EF BB BF. The last byte BF corresponds to the upside down question mark '¿' in ISO-8859-1. Too me, it seems as if ConvertToClob is not converting correctly.
Am I missing something?
code snippets:
l_lang_context number := 1;
dbms_lob.createtemporary(l_file_clob, TRUE);
dbms_lob.convertToClob(l_file_clob, l_file_blob,l_file_size, l_dest_offset,
l_src_offset, l_blob_csid, l_lang_context, l_warning);
procedure fetch_xmldoc(p_xmlclob in out nocopy clob,
o_xmldoc out xmldom.DOMDocument) is
parser xmlparser.Parser;
begin
parser := xmlparser.newParser;
xmlparser.parseClob(p => parser, doc => p_xmlclob);
o_xmldoc := xmlparser.getDocument(parser);
xmlparser.freeParser(parser);
end;The database version is 10.2.0.3 on Solaris 10 x86_64
Eyðun
Edited by: Eyðun E. Jacobsen on Apr 24, 2009 8:58 PM

can this be of some help? http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions027.htm#SQLRF00620
Regards
Etbin

Crypto errors CTM ERROR: Failed to allocate x bytes of memory

Hi There.
I am currently getting a strange error when trying to use and crypto services on our ASA 5520 (8.0.3)
Initially I observed that a connected VPN had dropped.
Then when I attempted to use ASDM or SSH I was blocked.
In the end I opened telnet as a test and this was successful. Syslog also shows that traffic is passing as normal.
The only obvious error I can see when observing various debug traces is this;
FW02# CTM: rsa session with no priority allocated @ 0xCF1FBBA0
CTM: Session 0xCF1FBBA0 uses a nlite (Nitrox Lite) as its hardware engine
CTM: rsa context allocated for session 0xCF1FBBA0
CTM: rsa session with no priority allocated @ 0xCE7A5EA8
CTM: Session 0xCE7A5EA8 uses a nlite (Nitrox Lite) as its hardware engine
CTM: rsa context allocated for session 0xCE7A5EA8
CTM: rsa session with no priority allocated @ 0xCEF249D0
CTM: Session 0xCEF249D0 uses a nlite (Nitrox Lite) as its hardware engine
CTM: rsa context allocated for session 0xCEF249D0
CTM: dh session with no priority allocated @ 0xCEF249D0
CTM: Session 0xCEF249D0 uses a nlite (Nitrox Lite) as its hardware engine
CTM: dh context allocated for session 0xCEF249D0
CTM ERROR: Failed to allocate 279 bytes of memory, ctm_nlite_generate_dh_key_pair:183
Has anyone seen anything like this before as I am lost?
Mike

Thanks for that. It does look like its out of crypto memory...
DMA memory:
   Unused memory:                 23849516 bytes (30%)
   Crypto reserved memory:        20537556 bytes (26%)
     Crypto free:                       0 bytes ( 0%)
     Crypto used:                20537556 bytes (26%)
   Block reserved memory:         34669024 bytes (44%)
     Block free:                 30734752 bytes (39%)
     Block used:                  3934272 bytes ( 5%)
   Used memory:                     185120 bytes ( 0%)
Unless there is a way to specifically restart only the crypto engine or clear crypto memory then I guess I am looking at a reload?
Mike

Error: Invalid byte 2 of 3-byte UTF-8 sequence

Similar Messages

Maybe you are looking for