Error JCO_ERROR_FIELD_NOT_FOUND in ISA

Hello everybody,
we installed a CRM B2B shop application in Netweaver version 7.01 SP 5.
The application work correctly but when we try to save order we have the follow error:
   com.sap.mw.jco.JCO$Exception: (127) JCO_ERROR_FIELD_NOT_FOUND: Field HOUSE_NO_LONG not a member of BAPISDCOAD
     at com.sap.mw.jco.JCO$MetaData.indexOf(JCO.java:9566)
     at com.sap.mw.jco.JCO$Record.getString(JCO.java:14118)
any suggestion??

Hi apederiva,
check first if the structure has the field in the crm backend. If it is not contained you should see in the exception in which class the exception is thrown. Is this a "standard" sap class or is this your own BusinessObject?
Best regards,
Nils

Similar Messages

Login page error in the ISA b2b 5.0 application.

Hi all
i deployed the CRM ISA b2b 5.0 application successfully in the j2ee engine and after that i have done the XCM configuration also successfully and i tested thru run test for both JCO and IPC components all are successful.
now when i tried with the b2b application with the following URL it is giving some different error.it is not related to application it seems the different error related to some browser or i am not sure.
URL : http://hsdnt24s15:50400/b2b/b2b/init.do when i press enter here
then it showing the following error but the error it seems not related to application side, it is different error.after pressing the enter with the above URL then URL itself is changing in the browser as like the following URL
browser URL : https://hsdnt24s15:${https.port.core.isa.sap.com}/b2b/user/secureSwitch.do
Error Details:
The page cannot be displayed
The page you are looking for might have been removed or had its name changed.
Please try the following:
Open the hsdnt24s15:${https.port.core.isa.sap.com} home page, and then look for links to the information you want.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
If you still cannot open the page, click the Internet Explorer
Search button to look for similar sites.
Internet Explorer
Please can you help me what is the solution to my problem.
i will reward the maximun points.
Regards
Sunil

Hi Mike
i have some other problem now , can i you help me on this.
i have the logon problem in the CRM ISA b2b 5.0 application when i have accessed thru the following URL.
http://hsdnt24s15.hclt.corp.hcl.in:50400/b2b/b2b/init.do
it is giving the error as follows.
Error while executing SAP E-Commerce Application with UME system; try again to log on. If the problem persists, call our hotline.
before that we have made the XCM configuration for CRM ISA b2b 5.0
Can you guide was there any problem in the XCM configuration?
Please help how to resolve this issue for logon problem in ISA b2b 5.0?
Regards
Sunil

Error Message in ISA B2B.

Hi Gurus,
I need a help to make the following. I have changed the message type "Product is not in the entered catalog/variant " from Warning to Error. But now I need for this message to have the same behaviour as message "The Product is blocked for ordering" (when the status of the product is set to blocked), because I need - in the shopping basket - not to display the pricing whenever the message comes out.
I have realized that the Blocked error message doesn't calculate the pricing, therfore I want to have the same behaviour for both the Messages.
can you help?
thanks a ton

Hi Lakshman,
I mean some data check before order save - for example, I need to display an error message if for given delivery type total quantity of products exceed maximum possible value for this product & this delivery type.
But what is really important - it is how to check ISA B2B Webshop Order data only after I press "Save" button (only once - before save), not every time when I'm pressing ENTER, for example.
Could you give me some advice what ISA* Badi method do I need to use?
Thanks.

J2EE Cluster Error while deploying ISA b2c.ear file.

Hi All,
I am trying to deploy b2c.ear file through SDM deploytool.
My build tool is working fine. In SAP MMC all node is green. All J2EE service is running. But when I try to deploy file through SDM i am getting below error.
Deployment started Sun May 14 14:24:50 PDT 2006
===========================================================================
Starting Deployment of crm.b2c_ashish
Aborted: development component 'crm.b2c_ashish'/'sap.com'/'SAP AG'/'400.200605141307':
SDM could not start the J2EE cluster on the host dgntisa! The online deployment is terminated. JStartup Framework is not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment of crm.b2c_ashish finished with Error (Duration 3250 ms)
===========================================================================
IF some one has any idea then pl. show me the way. I am new to CRM ISA side so pl. help me out.
Thanks in advance.
Ashish Patel.

Hi Rajesh,
Below is the part of the log file.
==============================
#1.5#0013D4B7BFFF002600000001000001A800041439E82CD452#1148138847796#com.sap.engine.services.monitor.common.Template##com.sap.engine.services.monitor.common.Template######25430f40e81511da9ca50013d4b7bfff#SAPEngine_System_Thread[impl:5]_52##0#0#Error##Plain###javax.management.InstanceNotFoundException: com.sap.default:name=com.sapmarkets.isa.core.jmx.ext.MyXCMInstProvider,SAP_J2EEApplicationPerNode=sap.com/crm.b2c_dgn,j2eeType=SAP_ApplicationResourcePerNode,SAP_J2EEClusterNode=8527350,SAP_J2EECluster=ITG not in repository
     at com.sap.pj.jmx.server.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1291)
     at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.getAttribute(MBeanServerWrapperInterceptor.java:181)
     at com.sap.engine.services.jmx.CompletionInterceptor.getAttribute(CompletionInterceptor.java:300)
     at com.sap.engine.services.jmx.RedirectInterceptor.getAttribute(RedirectInterceptor.java:232)
     at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
     at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.getAttribute(MBeanServerSecurityWrapper.java:234)
     at com.sap.engine.services.jmx.ClusterInterceptor.getAttribute(ClusterInterceptor.java:559)
     at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
     at com.sap.engine.services.monitor.mbeans.Template.pollDynamicData(Template.java:891)
     at com.sap.engine.services.monitor.mbeans.Template.handleNotification(Template.java:847)
     at com.sap.engine.services.jmx.server.AscynchronousProxyListener.handleNotification(AscynchronousProxyListener.java:51)
     at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:94)
     at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:61)
     at com.sap.engine.services.jmx.timer.j2ee.Timer.sendTimerNotification(Timer.java:407)
     at com.sap.engine.services.jmx.timer.j2ee.TimerNotificationEntry.timeout(TimerNotificationEntry.java:69)
     at com.sap.engine.services.timeout.TimeoutNode.run(TimeoutNode.java:50)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
=========================
According to log file it says that
SAP_J2EECLUSTER = ITG is not in Repository.
It looks like that some parameter setting is missing. Do you have any idea where I can set "SAP_J2EECLUSTER" Parameter.
Thanks.
Ashish Patel.

Error in the ISA User Admin to create users

Hi all
i am not able to create the users thru the ISA user admin. while creating the user for new contact persons we are getting the error as " User Does not Exist" and also while creating the user for existing contact persons we are getting error as " User already Exists". in our project landscape CUA also part along with CRM and Portal. i am not able to find out from where exactly we are getting the error either from CRM side or else from CUA side.
Regards
suresh babu

Hi,
You can open any process in an iview which is assigned to a page and to a role. Once you click on this role, the process will get initiated and the webdynpro application will be displayed.
If you open the instantiating url, it will ask for the input parameters that are to be passed to the application and initiates the application. It does not display your webdynpro page.
For the iview you have created, Assign this iview to a page, and then assign it to a role. Assign the role to your user id and then open the role. Also mention in the iview parameters if any role based information has to be passed.
Award points if helpful.
Regards,
Sujana

Error B2B Segment ISA at guideline position missing

Hi Guru's
Wehn we are running the B2B by giving it EDI file we are getting following error:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>C0A8633811F1CC820E7000006E1F0400-1</b2bMessageId>
<errorCode>AIP-51505</errorCode>
<errorText>5016: A mandatory data element is missing.</errorText>
<errorDescription>
<![CDATA[Machine Info: (soaappcrp1.dpi.com)
Segment ISA(Interchange Control Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 837 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
<parameter name="GroupReceiverID" value="9099751019"/>
<parameter name="TransactionImplementationReference" value=""/>
<parameter name="Size" value="660"/>
<parameter name="TransactionChildCount" value="23"/>
<parameter name="InterchangeReceiverQual" value="01"/>
<parameter name="InterchangeChildCount" value="1"/>
<parameter name="InterchangeControlVersion" value="00200"/>
<parameter name="GroupID" value="OG"/>
<parameter name="SubelementDelimiter" value=">"/>
<parameter name="InterchangeSenderQual" value="12"/>
<parameter name="InterchangeUsageIndicator" value="P"/>
<parameter name="GroupChildCount" value="1"/>
<parameter name="InterchangeSenderID" value="8283234100 "/>
<parameter name="InterchangeControlNumber" value="000271883"/>
<parameter name="InterchangeTime" value="1315"/>
<parameter name="RepeatingSeparator" value=""/>
<parameter name="ErrorScope" value="Transaction"/>
<parameter name="GroupVersionNumber" value="004010"/>
<parameter name="InterchangeDate" value="081103"/>
<parameter name="TransactionTrailerControlNumber" value="171889"/>
<parameter name="InterchangeAuthorizationInfoQual" value="00"/>
<parameter name="GroupSenderID" value="8283234100"/>
<parameter name="InterchangeAuthorizationInfo" value=" "/>
<parameter name="GroupTrailerControlNumber" value="271883"/>
<parameter name="InterchangeTrailerControlNumber" value="000271883"/>
<parameter name="SegmentDelimiter" value="
"/>
<parameter name="InterchangeControlStandard_RepeatingSeparator" value="U"/>
<parameter name="TransactionID" value="875"/>
<parameter name="GroupControlNumber" value="271883"/>
<parameter name="InterchangeComponentElementSep" value=">"/>
<parameter name="InterchangeSecurityInfo" value=" "/>
<parameter name="DecimalSeparator" value=""/>
<parameter name="GroupAgencyCode" value="T"/>
<parameter name="InterchangeSecurityInfoQual" value="00"/>
<parameter name="InterchangeReceiverID" value="041158668 "/>
<parameter name="ReleaseCharacter" value=""/>
<parameter name="GroupTime" value="1315"/>
<parameter name="TransactionControlNumber" value="171889"/>
<parameter name="GroupDate" value="20081103"/>
<parameter name="InterchangeAckRequested" value="0"/>
<parameter name="ElementDelimiter" value="*"/>
</errorDetails>
</Exception>
In the logs I am seeing the following error 2009.01.28 at 02:28:11:116: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup
1c
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = TransactionID, val = [875]
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [875]
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Transaction]
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = ecsFileKey
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = 6177FD270834B0EEE043C0A86365B0EE-274-1-2
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsOptFileBlob
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsFileBlob
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = xsdFilePath
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.01.28 at 02:28:11:596: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber sName = Transaction, controlNumber = 171889
2009.01.28 at 02:28:11:596: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber return = true
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = lck
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {5CB8FDC2-ED26-11DD-93E2-00151769BE8C} position = 0
2009.01.28 at 02:28:11:605: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
2009.01.28 at 02:28:11:620: Thread-40: B2B - (DEBUG) iAudit report :
Error Brief :
5016: A mandatory data element is missing.
5016: A mandatory data element is missing.
5016: A mandatory data element is missing.
5016: A mandatory data element is missing.
iAudit Report :
<?xml version="1.0" encoding="UTF-16"?><AnalyzerResults Guid="{5CB88E1E-ED26-11DD-93E2-00151769BE8C}" InterchangeReceived="1" InterchangeProcessed="1" InterchangeAccepted="0"> <ExecutionDate>Wednesday, January 28, 2009</ExecutionDate> <ExecutionTime>02:28:11 AM (PST)</ExecutionTime> <AnalyzerReturn>Failed</AnalyzerReturn> <NumberOfErrors>4</NumberOfErrors> <ErrorByCategory> <Category Name="Rejecting"> <Severity Name="Normal">4</Severity> </Category> </ErrorByCategory> <Status>Finished</Status> <DataFile> <FilePath/> <FileName/> <LastModified/> <FileSize/> <DataURL>file://</DataURL> </DataFile> <Interchange Guid="{5CB8EE72-ED26-11DD-93E2-00151769BE8C}" InterchangeAckCode="R" FunctionalGroupReceived="1" FunctionalGroupProcessed="1" FunctionalGroupAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>0</StartPos> <Size>856</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>ES</ID> <Name>ENVELOPE SEGMENTS</Name> <Standard>X12</Standard> <StdVersion>SERVICE SEGMENTS</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="InterchangeSenderQual">12</Link> <Link Name="InterchangeSenderID">8283234100 </Link> <Link Name="InterchangeReceiverQual">01</Link> <Link Name="InterchangeReceiverID">041158668 </Link> <Link Name="InterchangeControlVersion">00200</Link> <Link Name="Standard">X12</Link> </Links> <Properties> <Property Name="InterchangeAuthorizationInfoQual">00</Property> <Property Name="InterchangeAuthorizationInfo"> </Property> <Property Name="InterchangeSecurityInfoQual">00</Property> <Property Name="InterchangeSecurityInfo"> </Property> <Property Name="InterchangeSenderQual">12</Property> <Property Name="InterchangeSenderID">8283234100 </Property> <Property Name="InterchangeReceiverQual">01</Property> <Property Name="InterchangeReceiverID">041158668 </Property> <Property Name="InterchangeDate">081103</Property> <Property Name="InterchangeTime">1315</Property> <Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property> <Property Name="InterchangeControlVersion">00200</Property> <Property Name="InterchangeControlNumber">000271883</Property> <Property Name="InterchangeAckRequested">0</Property> <Property Name="InterchangeUsageIndicator">P</Property> <Property Name="InterchangeComponentElementSep">0x3e</Property> <Property Name="DecimalSeparator"/> <Property Name="ElementDelimiter">0x2a</Property> <Property Name="ReleaseCharacter"/> <Property Name="RepeatingSeparator"/> <Property Name="SegmentDelimiter">0xd0xa</Property> <Property Name="SubelementDelimiter">0x3e</Property> <Property Name="InterchangeChildCount">1</Property> <Property Name="InterchangeTrailerControlNumber">000271883</Property> </Properties> </NodeInfo> <FunctionalGroup Guid="{5CB8F926-ED26-11DD-93E2-00151769BE8C}" FunctionalGroupAckCode="R" TransactionSetsIncluded="1" TransactionSetsReceived="1" TransactionSetsProcessed="1" TransactionSetsAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>107</StartPos> <Size>732</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>ES</ID> <Name>ENVELOPE SEGMENTS</Name> <Standard>X12</Standard> <StdVersion>SERVICE SEGMENTS</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="GroupSenderID">8283234100</Link> <Link Name="GroupReceiverID">9099751019</Link> <Link Name="GroupVersionNumber">004010</Link> </Links> <Properties> <Property Name="GroupID">OG</Property> <Property Name="GroupSenderID">8283234100</Property> <Property Name="GroupReceiverID">9099751019</Property> <Property Name="GroupDate">20081103</Property> <Property Name="GroupTime">1315</Property> <Property Name="GroupControlNumber">271883</Property> <Property Name="GroupAgencyCode">T</Property> <Property Name="GroupVersionNumber">004010</Property> <Property Name="GroupChildCount">1</Property> <Property Name="GroupTrailerControlNumber">271883</Property> </Properties> </NodeInfo> <Transaction Guid="{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}" TransactionAckCode="R" RError="4" NError="0" OtherWI="0"> <DataXPointer> <StartPos>166</StartPos> <Size>660</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>875</ID> <Name>GROCERY PRODUCTS PURCHASE ORDER</Name> <GroupID>OG</GroupID> <Standard>X12</Standard> <StdVersion>V4010</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="TransactionID">875</Link> </Links> <Properties> <Property Name="TransactionID">875</Property> <Property Name="TransactionControlNumber">171889</Property> <Property Name="TransactionImplementationReference"/> <Property Name="TransactionChildCount">23</Property> <Property Name="TransactionTrailerControlNumber">171889</Property> </Properties> </NodeInfo> <TransactionErrors> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1340</IID> <ID>ISA</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>0</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="1" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment ISA(Interchange Control Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 837</ErrorMsg> <DetailGuidelineInfo> <IID>1340</IID> <ID>ISA</ID> <Name>INTERCHANGE CONTROL HEADER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>ISA</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">0</Parameter> <Parameter Name="_ec_last_known_data_offset">837</Parameter> <Parameter Name="_ec_node_id_">430</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">837</Parameter> <Parameter Name="ec_DataPath"/> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath"/> <Parameter Name="ec_SegmentCount">0</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <Part3/> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1399</IID> <ID>GS</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>0</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="2" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment GS(Functional Group Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 837</ErrorMsg> <DetailGuidelineInfo> <IID>1399</IID> <ID>GS</ID> <Name>FUNCTIONAL GROUP HEADER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>GS</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">1</Parameter> <Parameter Name="_ec_last_known_data_offset">837</Parameter> <Parameter Name="_ec_node_id_">469</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">837</Parameter> <Parameter Name="ec_DataPath"/> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath"/> <Parameter Name="ec_SegmentCount">0</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <Part3/> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1431</IID> <ID>GE</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>23</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="3" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment GE(Functional Group Trailer) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 23{br}{tab}Character: 824</ErrorMsg> <DetailGuidelineInfo> <IID>1431</IID> <ID>GE</ID> <Name>FUNCTIONAL GROUP TRAILER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>GE</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">2</Parameter> <Parameter Name="_ec_last_known_data_offset">824</Parameter> <Parameter Name="_ec_node_id_">486</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">824</Parameter> <Parameter Name="ec_DataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_SegmentCount">23</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1>SE*23*171889</Part1> <Part3/> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1442</IID> <ID>IEA</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>23</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="4" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment IEA(Interchange Control Trailer) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 23{br}{tab}Character: 824</ErrorMsg> <DetailGuidelineInfo> <IID>1442</IID> <ID>IEA</ID> <Name>INTERCHANGE CONTROL TRAILER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>IEA</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">3</Parameter> <Parameter Name="_ec_last_known_data_offset">824</Parameter> <Parameter Name="_ec_node_id_">490</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">824</Parameter> <Parameter Name="ec_DataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_SegmentCount">23</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1>SE*23*171889</Part1> <Part3/> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> </TransactionErrors> </Transaction> </FunctionalGroup> </Interchange></AnalyzerResults>
2009.01.28 at 02:28:11:621: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processIncomingDocument sErrorGuid =
I have cheked the EDI payload in spec builder and it comes up fine. I tried doing whole configuration by getting new ECS file from spec builder, making a Buisness Action, creating TP, creating aggrement.
Any guess what the issue is.
any pointer will be highly appreciated.
Regards
Sahil

Hi Sahil,
It seems like the ecs file used in the document definition contains the Interchange(ISA)/group segments(GS). Please remove the these ISA and GS segments and use only the transaction set (ST) segments.
Thanks and Regards,
Prasanna

Error :JCO_ERROR_FIELD_NOT_FOUND with JCo3

Hi Experts,
I have created a java application to send a XML to SAP inorder generate an IDOC by using SAP JCo3. But during parsing i am facing an error
" Field COSMAS01 not a member of EDI_DC40StackTrace:com.sap.conn.jco.JCoRuntimeException: (127) JCO_ERROR_FIELD_NOT_FOUND : Field COSMAS01 not a member of EDI_DC40
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1111) "
But same XML is working fine when i am using java application supporting SAP JCo2 version.
Where am i making mistake ? What could be the possible rechecks i need to perform ?
Thanks in advance

are you printing the XML to check everything its good?
on the SE11 Im watching the EDI_DC40 estructure and I dont see that field, nevertheless you could use some idoc transactions to debug your xml better. I would suggest you to post on XI forums too (Expert Forums » SAP NetWeaver » Process Integration )
check testing
http://wiki.sdn.sap.com/wiki/display/XI/XITransactionCodes
also sxmb_moni
Edited by: Jean Carlo Abreu on Jul 16, 2009 12:43 PM

Relogin Error connecting to ISA B2B Shop iView for SAP CRM 4.0

Hi
I am trying to access ISA B2B Shop iView (for SAP CRM 4.0) from EP 6.0 SP14. I am getting the below mentioned error
ERROR : "The session is invalid." "Please re-login."
Please find the portal version details:
Area                   Version
J2EE Engine            6.40 PatchLevel 98256.313
Portal                 6.0.14.0.0
Please help me in solving this issue
Regards
Sudhir

Hi,
I have the same error, could you help me ?
Thanks and regards.
Manuel .-

XCM Error in Custom ISA Application

Hi Gurus
I want to create a custom application like the one described
in this
note 1017761: imsb2b.
I did this way:
In the first NWDS I have created imsb2b in a NWDS and then I
have
added dependencies between DCs and modified just files in
imsb2b
component which resides in CUSTCRMPRJ. Then I have
checked-in all the
activities to the server.
In the second NWDS I have imported the configuration and I
have created the required projects imsb2b, shopadmin and
b2b. After deployment I could see just the xcm of shopadmin
and b2b.
I got the following error when I try to access xcm for
imsb2b:
An unexpected error occurred in the admin console. For more
information, please check your log file.
Then I have followed note 1017761 in the second NWDS (this
required to change a lot of xml content from b2b to imsb2b),
but I still get the error when I try to access xcm for
imsb2b.
There is anything apart note 1017761 I should try to
implement?
Thanks a lot,
CRM Team

Hi Sateesh
Thanks for the reply.
I am making a Web Module project for my dc project. Included all the library files required into public parts.
Build it and deployed it.
Now I think its more appropriate to give the first error. It is coming as
Application error occurred during the request procession.
Details: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException:
Error parsing [/start.jsp] of alias [LocalDevelopmentecom_auctastykake.com] of J2EE application [tastykake.com/ecomear].
Exception id: [0007E923BE02006F000000180000244400044B19525B1D70]
I have seen the note 1017761, and applied it after creating the data-source-aliases and doing changes in web.xml and xcm files.
But now also error remains the same. I shall be really grateful if you could advise on this.
By the time, I will try to create a project as you have recommended. Also what do we need to do for the additional jar files. Please advise.
Thanks
Gaurav Sahai
Edited by: Gaurav Sahai on Apr 18, 2008 1:37 AM

ISA Error by running an application in JDeveloper 10.1.3

Hi every body
when i run my web application in oc4j( embeded in jdeveloper 10.1.3) I see this error "Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202) "
what's wrong?
by thanks
Javaneh

I am also facing the same issue on my laptop. I searched for forum but no luck.
appreciate if anybody can throw some light on this.

ISA Frame Work "Internal Error " In IPC 4.0 Webapplications

Hi
I had installed IPC 4.0 and also Webapplications.When i tried to open the file command.html for testing purpose as per installtion guide .i get the following error in browser
"ISA Framework: Internal Error
Application cannot be startetContext parameter 'customer.config.path.xcm.config.isa.sapmarkets.com' is not maintained in web.xml.For further information see the description of the parameter and the installation guide".
I had opened web.xml and updated the following parameter
"<param-value>%sys.global.dir%/xcm/${com.sap.dc_name}</param-value> " with
"<param-value>C:\xcm_dir</param-value> " but still gets the same error.
Is any tool is available to modify the web.xml file or directly can modify or suggest me the correct value to be put in parameter (c:\xcm is the directory).
thanks
satish kumar

Hi ,
I dont think its a critical error.
What's happening is that there is already user data in the roll in memory/buffer of some user but in the connection table(tm_adm) the user present at that time is different .
i.e there was a mis match between user info in tm_adm and roll-in area due and hence the error.
Scenario Could be:
The user whose data is there in roll-in buffer must have logged off or his connection was suddenly terminated
Regards,
Ameya Joshi

I can't see the java errors (ISA 4 - WAS 6.40)

Hi everybody,
Why I can't see the errors originated in jsp? when an error occurs, the ISA (b2b) displays a blank page only. =(
Should I make a configuration in WAS or ISA for enabling this ?
Thanks a lot ! Regards from Mexico.
Diego

I had the same situation. You get blank screen if you have (some specific)exceptions thrown in your code. My suggestion is to encapsulate your jsp code in try catch block and manually print out the exceptions on to jsp page using out.println() statement.
hope this helps.
Santhosh
Message was edited by: Santhosh Kumar

Error executing custom function module

Hi all,
am trying to read a function module form my java code as below.
There is no problem with the function module.
I think there is some problem with the java code that is written. I am sure the problem lies with the TABLES IT_PRODUCT_DATA STRUCTURE ZOG_ITEM_SCREENSTR.
Function module parameters and signature.
FUNCTION ZGET_CUST_ORDERGUIDE_ITEMDATA.
""Local Interface:
*" IMPORTING
*" VALUE(IV_ORDER_GUID) TYPE CRMT_OBJECT_GUID OPTIONAL
*" VALUE(IV_CUSTOMER) TYPE BU_PARTNER
*" TABLES
*" IT_PRODUCT_DATA STRUCTURE ZOG_ITEM_SCREENSTR
Java Code that is Implemented is attached above.
public ArrayList fetchOrderGuide(String customerNumber) {
 ArrayList itemList = new ArrayList();
 ItemSalesDoc itemSalesDoc = new ItemSalesDoc();
 if (log.isDebugEnabled()) {
 log.debug("inside ZAdminLogin");
 try
 JCoConnection aJCoCon = (JCoConnection) getConnectionFactory().getConnection(com.sap.isa.core.eai.init.InitEaiISA.FACTORY_NAME_JCO,
 com.sap.isa.core.eai.init.InitEaiISA.CON_NAME_ISA_STATEFUL);
 try
 try
 JCO.Function zFetchSalesOrderFunctionModule = aJCoCon.getJCoFunction("ZGET_CUST_ORDERGUIDE_ITEMDATA");
 // set the import values
 Table zItemsTable = new Table("ITEMS");
 //zPackagesTable.addColumn(Table.TYPE_STRING,"HUI");
 zItemsTable.addColumn(Table.TYPE_STRING,"JOGITEM");
 zItemsTable.addColumn(Table.TYPE_INT,"JPRUOM");
 zItemsTable.addColumn(Table.TYPE_STRING,"JPRSEQ");
 zItemsTable.addColumn(Table.TYPE_STRING,"JOGDESC");
 zItemsTable.addColumn(Table.TYPE_STRING,"JLINE");
 zItemsTable.addColumn(Table.TYPE_STRING,"JOGNR");
 zItemsTable.addColumn(Table.TYPE_STRING,"JPACK");
 zItemsTable.addColumn(Table.TYPE_STRING,"JSIZE");
 zItemsTable.addColumn(Table.TYPE_STRING,"JBRAND");
 zItemsTable.addColumn(Table.TYPE_STRING,"JWEEKAVG");
 zItemsTable.addColumn(Table.TYPE_STRING,"JDELFLAG");
 JCO.ParameterList importParams = zFetchSalesOrderFunctionModule.getImportParameterList();
 importParams.setValue("BP-104", "IV_CUSTOMER");
 aJCoCon.execute(zFetchSalesOrderFunctionModule);
 JCO.Table zRtItems = zFetchSalesOrderFunctionModule.getTableParameterList().getTable("IT_PRODUCT_DATA");
 int numberOfPackages = zRtItems.getNumRows();
 if (log.isDebugEnabled()) {
 log.debug("number of packages " + numberOfPackages);
 if (numberOfPackages > 0)
 for (int j=0; j<numberOfPackages; j++)
 TableRow itemRow = zItemsTable.insertRow();
 //itemRow.setRowKey(new TechKey(zRtItems.getString("EXIDV")));
 //packageRow.getField("HUI").setValue(zGoods.getString("EXIDV"));
 itemRow.getField("JOGITEM").setValue(zRtItems.getString("OGITEM"));
 itemRow.getField("JPRSEQ").setValue(zRtItems.getString("PRSEQ"));
 itemRow.getField("JOGDESC").setValue(zRtItems.getString("OGDESC"));
 itemRow.getField("JLINE").setValue(zRtItems.getString("LINE"));
 itemRow.getField("JOGNR").setValue(zRtItems.getString("OGNR"));
 itemRow.getField("JPACK").setValue(zRtItems.getString("PACK"));
 itemRow.getField("JSIZE").setValue(zRtItems.getString("SIZE"));
 itemRow.getField("JBRAND").setValue(zRtItems.getString("BRAND"));
 itemRow.getField("JWEEKAVG").setValue(zRtItems.getString("WEEKAVG"));
 itemRow.getField("JDELFLAG").setValue(zRtItems.getString("DELFLAG"));
 zRtItems.nextRow();
 catch(JCO.AbapException abapException)
 //Exception thrown, user is not valid
 if(log.isDebugEnabled())
 log.debug( abapException.getKey());
 catch (Exception ex)
 if (log.isDebugEnabled()) {
 log.debug(ex);
 finally
 aJCoCon.close();
 catch(BackendException beeEx)
 if(log.isDebugEnabled())
 return itemList;
LOGDETAILS
ZGET_CUST_ORDERGUIDE_ITEMDATA:: - IN: INPUT * IV_CUSTOMER='BP-104' IV_ORDER_GUID='00000000000000000000000000000000'
Oct 9, 2008 6:48:41 AM,507 SAPEngine_Application_Thread[impl:3]_7 Error com.sap.isa.core.eai.sp.jco.JCoConnectionStateful Error occcurred in EAI layer "com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Trying to access row values in a table which does not have any rows yet".
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Trying to access row values in a table which does not have any rows yet
 at com.sap.mw.jco.JCO$Record.checkRowCapacity(JCO.java:12354)
 at com.sap.mw.jco.JCO$Record.getString(JCO.java:12827)
 at com.sap.mw.jco.JCO$Field.getString(JCO.java:11055)
 at com.sap.isa.core.eai.sp.jco.JCoUtil.paramIterator(JCoUtil.java:412)
 at com.sap.isa.core.eai.sp.jco.JCoUtil.logCall(JCoUtil.java:382)
 at com.sap.isa.core.eai.sp.jco.JCoUtil.logCall(JCoUtil.java:236)
 at
All helpful answers will be rewarded heavily

hi,
first of all you do not set the import values for your table correct. You should do something similar like this:
Function myFunction = connection.getJCoFunction(Z_FM");
Table myTable = myFunction.getTableParameterList().getTable("Z_TABLE");
for(int i=0; i<2; i++) {
 myTable.appendRow();
 myTable.setValue(value1,"VALUE1");
 myTable.setValue(value2,"vALUE2");
 connection.execute(myFunction);
Did you debug your java class? You should check at which point your java class throws the error.
Regards
Michael

Error while creating an Order

Hi Experts,
We are using CRM7.0 with ECC and CRM as backend. When we are trying to create an order, it throws an error log shown below
SAPEngine_Application_Thread[impl:3]_28 Error com.sap.isa.isacore.action.order.MaintainBasketSendAction A runtime exception occurred on the highest level
[EXCEPTION]
java.lang.NullPointerException
at com.sap.isa.businessobject.ShipTo.clone(ShipTo.java:231)
at com.sap.isa.backend.r3lrd.WrapperIsaR3LrdSet.fillPartner(WrapperIsaR3LrdSet.java:335)
at com.sap.isa.backend.r3lrd.WrapperIsaR3LrdSet.execute(WrapperIsaR3LrdSet.java:126)
at com.sap.isa.backend.r3lrd.salesdocument.SalesDocumentR3Lrd.updateInBackend(SalesDocumentR3Lrd.java:1934)
at com.sap.isa.businessobject.SalesDocument.update(SalesDocument.java:1354)
at com.sap.isa.isacore.action.order.MaintainBasketBaseAction.updateSalesDocument(MaintainBasketBaseAction.java:682)
at com.sap.isa.isacore.action.order.MaintainBasketSendAction.basketPerform(MaintainBasketSendAction.java:101)
at com.sap.isa.isacore.action.order.MaintainBasketBaseAction.isaPerform(MaintainBasketBaseAction.java:997)
I am unable to understand the error. Could someone please help me as why is this error coming up?
Thanks,
Gary

Hi Shanto,
SH ( ship to party ) is already maintained for this sold to party ( SP ) , We could create ORDER in ECC-GUI DIRECTLY ( with no incompletion log )
So, i am not as what could be the problem. Could someone please help ?
Thanks,
Gary

Error while installing oracle 10g developer suite on windows xp

I am getting following error when i am trying to install the oracle 10g developer suite windows xp with sp3
+*"---------------------------*+
Oracle Universal Installer+
---------------------------+
Error in writing to directory c:\TEMP\OraInstall2010-03-18_12-57-52PM. Please ensure that this directory is writable and has atleast 55 MB of disk space. Installation cannot continue."+
Even i have enough space of my C drive plus i m the administrator on my PC. I changed the temp location as well and download the zip files(installation) again but it doesn't work. Kindly provide some solution for this error.

Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202) This means you already have ISA configured as proxy server. Disable the proxy from the browser and you should be able to access the application. Or simply add the application URL to the list of the proxy exceptions.

Error JCO_ERROR_FIELD_NOT_FOUND in ISA

Similar Messages

Maybe you are looking for