Error Level 10: I have this error where a plugin broke that I had to remove because it was not finding it. How do i install it back so it functions?

Question

8/29/2014 7:15am
It seems to me that if Microsoft's platform can not fix it with the troubleshooter that the troubleshooter sucks.  It does not know when errors are thrown so your developer sucks on creating software for errors that are popping up in your software?
if a error is thrown in Windows 8 it should catch it upon a thrown error in programming? This hsould be a level 1 ticket. Since when I call you support for error in your product no one wants to address problems in your software and get mea tech to resolve
it?
The question now is how do I fix this and why is it causing me an internal error 500 for my web server install?
I may have other issues but I need access to my web server through my browser I used fsocketopen to troubleshoot it?
It gets back a internal 500 on Gecko process in firefox and on IE it just won't serve out the document in my web server abyss or apache? So the question is what service is broken so I can't serve my [web server] pages out? Let me go through all the event
logs that I have with errors below?
Under Applications:
1) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 10
2) LMS Service cannot connect to Intel(R) MEI driver. Error level 1
3) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 3
4) SearchIndexer (3476) Windows: The database engine attached a database (1, C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb). (Time=0 seconds)
5) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.125, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000.
Saved Cache: 1 0: Evenet Id level 326.
6) SearchIndexer (3476) Windows: The database engine started a new instance (0). (Time=0 seconds)
7) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000. eveent level 105
8) SearchIndexer (3476) Windows: The database engine (6.03.9600.0000) is starting a new instance (0). Error Level 102
Under Security:
1) We might want to check this out here User Account Management changed?
Under Setup: no errors.
Under System below:
1) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.Event level  1014
2) Intel(R) 82567LM-3 Gigabit Network Connection
 Network link is disconnected.
3) The system has returned from a low power state.
Sleep Time: ‎2014‎-‎08‎-‎29T05:10:07.602701000Z
Wake Time: ‎2014‎-‎08‎-‎29T13:13:47.945773100Z
Wake Source: Device -USB Root Hub : Error level 1
4) The browser has forced an election on network \Device\NetBT_Tcpip_{58565081-3013-43B6-AE07-CC89C71F6036} because a master browser was stopped. Event Id 8033.
5) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Event error 219.
6) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{3c83e4cf-28e9-11e4-827b-b8ac6f8aec21}#0000000000004000. Error Level Id 219.
7) The UMDF reflector was unable to complete startup because the WUDFPf service was not found.  This service may be started later during boot, at which point Windows will attempt to start the device again. Error Id 10114.
8) Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine.  The data field contains the error number. Event Id 15005.
9) The supersafer64 service failed to start due to the following error:
The system cannot find the file specified. Event ID 7000.
10) The SNMP Service encountered an error while accessing the registry key SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration. Error: 1500.
11) The SAS Core Service service failed to start due to the following error:
The system cannot find the file specified. 7000
12 The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/ for site 1. The site has been disabled. The data field contains the error number. 1004
13) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Error level 219
14) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded. Error level 1014.
Now I need help with all these error since Windows 8 with maybe 15 applications is failing after no setup errors? What would cause these we need to find out? Since I can not use your product with so many developer errors? and to put out a products that doesn
work is pointless? So please call me and have some help me through the errors and tell your support to stop ignoring the errors that broke the products?
Sincerely, William Dunlap {removed} N. Academy blvd, 201, Colorado Springs, CO 80910 http:\\interfacesone.fnhost.org
{removed}.  I need a tech to help me get my web server up?

Answer 1

So now you don't release the security breaches in windows 8. You mean to tell me that you can use Powershell - Using WMI to breach security in VB apps on the web by getting my file structures?
What is this all about?
 1 Set VPN NIC Settings
    2 Get Network Data from servers
Set VPN NIC Settings
$error.clear | out-null
cls
$ErrorActionPreference = "SilentlyContinue"
if ( $Args.Count -ne 1 ) { "
Not enough arguments
Usage :
    script.ps1 server
"; exit }
$server = $Args[0].ToLower()
"We are working with $server"
$netAdapt = get-wmiobject -class Win32_NetworkAdapter -computer $server
if (!($netAdapt)) {  
    "Failed to connect to the target server!"
    exit(5)
foreach ($card in $netAdapt) {
    IF (!([string]::IsNullOrEmpty($card.NetConnectionID))) {
        if ($card.NetConnectionID.CompareTo("VPN Virtual NIC") -eq 0) {
            $myID = $card.DeviceID
$NAC = [wmi]"\\$server\root\cimv2:Win32_NetworkAdapterConfiguration.index='$myid'"
$guid=$NAC.settingID
"Setting DNS Toggles"
$dnsToggle = $NAC.SetDynamicDNSRegistration(0,0)
if ($dnsToggle) {
        "Success"
    } else {
        "Failure"
$strShowNicKeyName = "SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\$guid\connection"
#$strShowNicKeyName
$reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey('LocalMachine', $server)
$regKey= $reg.OpenSubKey("$strShowNicKeyName",$true)
$showIcon = $regKey.GetValue("ShowIcon")
if (!($showIcon -eq 1)) {
    "The icon is hidden.. Setting it now"
    $setIcon = $regKey.SetValue('ShowIcon',1,'DWORD')
   } else {
    "The icon is visible already."
"Script Ends"
Get Network Data from servers
$myfile = get-content servers.txt
echo "Server    IPs    Subnet    GW" | out-file "Results.txt" -Append
foreach ($server in $myfile) {
    Write-Host "Looking at $server"
    $colitems = Get-WmiObject win32_NetworkAdapterConfiguration -computer "$server" -Filter 'IPEnabled = "True"' | select ipaddress,ipsubnet,index,defaultipgateway
    foreach($objItem in $colItems) {
    Write-Host ""
    $myip = $objItem.IPAddress -join " "
    $mySubnet = $objItem.IPSubnet  
    $myGW = $objItem.DefaultIPGateway
    $temp = $objItem.index
    $myid = Get-WmiObject win32_NetworkAdapter -computer "$server" -Filter "index = $temp" | select  netconnectionid
    $myid = $myid -replace "@{netconnectionid=",""
    $myid = $myid -Replace "}",""
    echo "$server    $myip    $mySubnet    $myGW    $myid"
    echo "$server    $myip    $mySubnet    $myGW    $myid"  | out-file "Results.txt" -Append
Is this possible on any machine with power shell and if so how is access done?
William Dunlap