Error logging on Report Conversion Tool (XIR2)

Hi,
I am unable to log onto Report Conversion Tool although I have supplied all the details correctly.
I am getting following error message :
[repo_proxy 16] SessionFacade::retrieveRights - java.lang.Exception: IInfoObject has not been found
     at com.bo.repo_proxy.SessionFacade.retrieveRights(SessionFacade.java:317)
     at com.bo.repo_proxy.SessionFacade.extractSessionInfo(SessionFacade.java:189)
     at com.bo.repo_proxy.SessionFacade.openSession(SessionFacade.java:129)
     at com.bo.migration.MigrationApp.<init>(MigrationApp.java:349)
     at com.bo.migration.MigrationTool.login(MigrationTool.java:321)
     at com.bo.migration.MigrationTool.<init>(MigrationTool.java:119)
     at com.bo.migration.MigrationTool.main(MigrationTool.java:390)
IAuthentication method used is Enterprise. BO version I am using is BO XIR2.
Could someone please help me to get this resolved. Help will be highly appreciated.
Regards,
Mukesh

Have you installed the RCT on the server hosting the CMS service or via a client? I have had this problem myself and resolved it by installing / working directly on the server.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken
http://twitter.com/mfoeken

Similar Messages

Report Conversion Tool - problem with logging in table OBJ_G_MIGRATION

Hello Community-Members,
since several days I am searching different BO-Communities for a solution, but I didn't find any threats about my problem.
I am new to BO XI R3.1 and I want to convert deski-reports with the report conversion tool.
I tried it directly on the server-machine and all is ok (report is converted inclusive the logging in the audit-table OBJ_G_MIGRATION).
When I try it on my client-machine, the conversion is made successfully, but there is no result in the audit-table.
On the client-machine, I use the same connection like on the server machine and on both machines, I am logged on (in the report conversion tool) with the "Administrator"-user.
Has anyone an idea? Could it be a problem of user-rights in the Oracle-DB?
kind regards
Guenny

Hello Denis,
thank you for your reply.
From my client machine I can successfully test the connection to the Audit-DB. With non BO-Tools like "SQL Tools1.4.1" I can also connect to that DB.
After your reply I have tested once again and I have found something else strange.
If I convert a deski-report, and the conversion-status is "not converted", the Audit-DB is written (for example: error-text = "document cannot be read" / workaround = "remove protection password if set").
But when I convert the same report together with an other report, which will result in "partially converted", nothing is written to the Audit-DB (same effect as when I convert only reports with status "partially convertet").
regards
Guenny

Report Conversion Tool error

Hi exports
iam using software 3.1
Iam facing below issue ,while converting deski to webi reports
Note : All my servers are up ..
Is i need to enable any options in servers
Thanks,
Raghunath

Hi Raghu,
Try this idea: run it on server. Other user suggest the Windows version as the reason. if does not run, reinstall the Tool, maybe something is corrupted.
Report Conversion Tool gives Error: Failed on Webintelligence Server
Regards

Problem when execute report Conversion Tool XI 3.0 on a client

Hi everyone,
When I use Report Conversion Tool on a client (not on Webi Server Windows 2003) I have an error (a red cross appears) before the conversion.
I believe that RCT can not open the document to migrate.
All it's OK when I use RCT since the Webi Server.
Any help will be appreciated.
Thanks

Hi,
Thank you for your prompt response.
I have install all the client tool (even SDK, Query Web Service) except Assitant migration source de données, Gestionnaires Vues d'entreprise et Gestionnaire de traduction.
I think I have a problem of rights on my Windows 2003 Server because in the log of conversion (C:Documents and SettingsUtilisateurLocal SettingsTempconversionUSER146731693logsD30860242.xml)
the following lines are written :
Note that I do the conversion with the Administrator login.

Report conversion tool on BO XI 3.0 doesn't work ?

Hi,
When I use "Report conversion tool" on BO XI 3.0, it doen't work : The conversion stop immediatly and the report is 0% converted
The audit connexion is OK
The Report Conversion Tool Audit Universe is OK
The same thing works on BO XI 3.1
Is it a bug in BO XI 3.0 ?
There is a fix ?
Can somebody help please ?
Thanks.

Hello again,
I put LANG=english in Report Conversion Tool, and I got these messages
Failed: BusinessObjects or Desktop Intelligence error
Not Converted : Document1 cannot be read
And in :\Documents and Settings\administrateur\Local Settings\Temp\conversion\USER146731693\logs,
there is a file D10817575.xml containing these informations :
<?xml version="1.0" encoding="UTF-8"?>
<MigrationLogFile LogDate=""><Document><Name>Document1</Name><LogEntries><LogEntry><Severity Id="420002">Error</Severity><Cause Id="100010">BusinessObjects document or Desktop Intelligence document cannot be opened</Cause><Source Id="420010">FC</Source><XMLSegment Id="100015">DC</XMLSegment><XMLPath></XMLPath><Type Id="100024">Error on BusinessObjects or Desktop Intelligence process</Type><SubType Id="101003">BusinessObjects or Desktop Intelligence process</SubType><Result Id="100350">.wid document could not be created</Result><ErrorText Id="100338">Document cannot be read</ErrorText><Keyword Id="100288">BusinessObjects or Desktop Intelligence error</Keyword><Focus></Focus><WorkAround Id="100504">Remove protection password if set</WorkAround></LogEntry>
</LogEntries><MigrationStatus>Not Converted</MigrationStatus></Document></MigrationLogFile>
I am logged with Administrator account, why I can't read the document Desktop Intelligence ?
Can some body help me ?
Thanks.

Report conversion tool--Can we modify the query

Hi all,
I have some freehand SQL reports converted into WebI reports. I understand that report conversion tool, creates a new universe for each of the freehand SQL report. But if I try to edit the query, like add a filter condition, an error pops out.
Is it possible to edit the query if we convert freehand sql reports into webi reports?
Regards
Ash.

Hi,
Yes it is possible to edit the query for the converted free hand sql query.
If you see any problem while editing the SQL of the converted report, do a refresh once and try.
Adding query filter also works fine.
Issue from your end could also be due to security settings.i advise to revisit the security once and make sure all appropriate rights are available for the user.
Thanks,
Sri

Business Objects Edge XI R2 - Missing Report Conversion Tool

We have BO Edge XI R2 (SP5) installed, and want to migrate a load of reports from a BO5.4 repository. We have used the Import Wizard to bring objects across, but according to the manual we need to use the Report Conversion Tool to convert them to WEBI report format. The manual seems to say that the Report Conversion Tool should be an option on the Start menu, but it just doesn't appear for me. I have uninstalled the client software from my machine and re-installed it, and there is no option to select to install it. Does anyone know how I can get access to the tool ?

Hello Bob
There are three products you actually mention in your post: Crystal Reports, Crystal Reports Server (Business Objects XI R2 server) and Business Objects Enterprise. Crystal Reports and Crystal Reports Server use the same runtime which is available from here:
[CR XI R2 (SP6) MSM for .NET|https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip]
[CR XI R2 (SP6) MSI for .NET|https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip]
Business Objects Enterprise SDK was always only available from the BOE Install CD and updates were posted to the SAP Market Place (SMP). This is a gated site and login info should have been provided to you on purchase of BOE. I am unable to find the runtime on SMP (it was more than likely removed when support for XI R2 products terminated last year), but I'm sure your account manager should be able to help you out.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Report Conversion Tool in BI 4.1 SP2 not working from Client PCs

Hi All,
I am trying to convert some DeskI reports to WebI using report RCT 4.1 SP2. I'm converting the DekI reports in 4.1 direclty to WebI, so my source and destination is always going to be 4.1
I am able to select the reports to be converted and when I click on the "Next" button on the conversion wizard, the conversion window opens and there is no progress for hours. I'm able to use RCT in the server, but only on the users PC's we are facing it.
Thanks in Advance.

Hi Navaladi,
Sort out whether the problem is only with RCT.
Check if other clients are working good by connecting to the server and RCT is the only having the problem. As said, the poblem is with all the users, try to check out the Patch that recently installed. On any one of the users box, you can try reparing option for clients tools and check. Check with any simple sample report with no data.
Rgds
Niranjan.

Error using the SQL conversion tool for Hand Held Management 7

This is for Zenworks 7 HandHeld Management.
I can't seem to find any mention of the SQLConv.exe tool in the
documentation for Hand Held Management??
Does any one have any?
Also when using this tool I get the following error message:
Error: DB-29 Database Message (1 of 2)
Thursday, October 05, 2006
An error occurred while executing the SQL command <CREATE
DATABASE [ZENHM]>.
Error: GEN-2 General Message (2 of 2)
Thursday, October 05, 2006
A database exception was caught: <>.
ODBC Return Code: <-2>
Return Code Meaning <>
Additional Information: <>

cactus,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Error while migrating reports from XI3.1 to BI4.0

Hi,
I have converted deski report into webi report using report conversion tool and i am trying to migrate the converted report from XI 3.1 to BI 4.0. I am getting 'Error:INF' while doing this. how to overcome this error while migration ?. any suggestions..
Regards,
Shanthakumar.

Hi,
could you please provice a little more information. Can you view the converted Reports in your XI 3.1 Environment? Are you trying to view the Reports as administrator in your BI4 Environment?
Regards
-Seb.

About error logs...urgent..

hello experts,
how will i use error log in my program?
thank you.:-)

Hi,
if there is no data in the table,if we write select statement then error message should be created in 'error log' when it run on background.
You need to create a Custom table , where you can store the Error Log.say report name and error text , Date of run , user name etc.
Best is create a Include , which you can use in all reports for future.
Later you can use the table to retrive log.
Or you can do in the following way:::::::::::::::::
You can use the function module 'APPL_LOG_WRITE_MESSAGES' to log application messages and display using FM 'APPL_LOG_DISPLAY'.
CALL FUNCTION 'APPL_LOG_WRITE_MESSAGES'
    EXPORTING
      OBJECT                    = ls_balhdri-object
    SUBOBJECT                 = ' '
      LOG_HANDLE                = gd_handle
    UPDATE_OR_INSERT          = 'U'
    TABLES
      MESSAGES                  = lt_balmi
EXCEPTIONS
    OBJECT_NOT_FOUND          = 1
    SUBOBJECT_NOT_FOUND       = 2
    OTHERS                    = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Or You can use the function module 'APPL_LOG_WRITE_MESSAGES' to log application messages and display using FM 'APPL_LOG_DISPLAY'.
CALL FUNCTION 'APPL_LOG_WRITE_MESSAGES'
    EXPORTING
      OBJECT                    = ls_balhdri-object
    SUBOBJECT                 = ' '
      LOG_HANDLE                = gd_handle
    UPDATE_OR_INSERT          = 'U'
    TABLES
      MESSAGES                  = lt_balmi
EXCEPTIONS
    OBJECT_NOT_FOUND          = 1
    SUBOBJECT_NOT_FOUND       = 2
    OTHERS                    = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regarding help for why you require and why to go for application logs, refer this SAP Help
http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa0223493111d182b70000e829fbfe/frameset.htm
Or you can try in the following way.depending upon your reqt you use any one.
DATA: ls_log TYPE bal_s_log.
DATA: p_log_handle TYPE balloghndl.
ls_log-extnumber = 'YMYTEST'.
ls_log-alprog = sy-repid.
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
    I_S_LOG                 = ls_log
IMPORTING
    E_LOG_HANDLE            = p_log_handle
EXCEPTIONS
    LOG_HEADER_INCONSISTENT = 1
    OTHERS                  = 2.
IF SY-SUBRC <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
data: l_s_msg TYPE bal_s_msg.
data: E_MSG_WAS_DISPLAYED type boolean.
data: E_MSG_WAS_LOGGED type boolean.
data: E_S_MSG_HANDLE type BALMSGHNDL.
l_s_msg-msgid = '00'.
l_s_msg-msgty = 'E'.
l_s_msg-msgno = '001'.
l_s_msg-msgv1 = 'This is a test message from 20130810'.
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
    I_LOG_HANDLE              = p_log_handle
    I_S_MSG                   = l_s_msg
IMPORTING
   E_S_MSG_HANDLE            = E_S_MSG_HANDLE
   E_MSG_WAS_LOGGED          = E_MSG_WAS_LOGGED
   E_MSG_WAS_DISPLAYED       = E_MSG_WAS_DISPLAYED
EXCEPTIONS
   LOG_NOT_FOUND             = 1
   MSG_INCONSISTENT          = 2
   LOG_IS_FULL               = 3
   OTHERS                    = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
data: I_T_LOG_HANDLE type BAL_T_LOGH.
append p_log_handle to i_t_log_handle.
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
EXPORTING
I_S_DISPLAY_PROFILE          =
    I_T_LOG_HANDLE               = i_t_log_handle
I_T_MSG_HANDLE               =
I_S_LOG_FILTER               =
I_S_MSG_FILTER               =
I_T_LOG_CONTEXT_FILTER       =
I_T_MSG_CONTEXT_FILTER       =
I_AMODAL                     = ' '
IMPORTING
E_S_EXIT_COMMAND             =
EXCEPTIONS
   PROFILE_INCONSISTENT         = 1
   INTERNAL_ERROR               = 2
   NO_DATA_AVAILABLE            = 3
   NO_AUTHORITY                 = 4
   OTHERS                       = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please reward if its useful.
Regards,
Sivaparvathi

Sap Payroll error log report

Hi All,
We are developing Report on SAP Payroll log with the error message . Is any table exist in SAP where we can get the standard error message repositery and then convert it in the User freindly error message ?
Thanks
H

Hello hg,
Before developing report on SAP Payroll error log I suggest taking a look at below blog. There is a new functionality from SAP to improve payroll data validation and they are calling it "Control Center Add-On".
This is going to be a free add on for anyone who is on EHP7 and NetWeaver on 7.4 release. The general availability is June 2nd 2014.
Improve payroll data validation with SAP Payroll control center add-on
Hope this helps.
Thanks,
Hemanth Jamithi.

Creation of error log on input data and stat report

I am doing call transaction on <b>C202</b> transaction.my client asked me before uploading the file he needs some validations on input file and he is asking me to create a log for all the validations.i have to place error lof for all the input data.
An error log will record all errors occurring during upload. For each error the list should
contain the data (line) going in error and an error text in a subsequent column (subsequent to data). The change number used to perform the upload will be stated in the header of the error list.A txt-file containing the error log will get the same name as the input file, but with an ending err.xls.
Therefore no Batch-Input-Session is needed.
After execution of the batch input program, the following analysis regarding execution will be shown:
o Number of records in input file (including title, first line)
o Number of records successfully updated
o Number of records in error
Example:
Number of records in input file (incl. first line) 4
Number of records successfully updated: 3
Number of records in error: 0
How to do this according to client requirements.can u help me to get a statastical way to represent errors. Send me some smpale code for number of errors and no records gets success and no of failed.
Thanks
chandrasekhar

Hai Chandrasekhar
Go through the following Code
report Z_CALLTRANS_VENDOR_01
no standard page heading line-size 255.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of it_lfa1 occurs 0,
KTOKK like lfa1-ktokk,
NAME1 like lfa1-name1,
SORTL like lfa1-sortl,
LAND1 like lfa1-land1,
end of it_lfa1.
End generated data section ***
data : it_bdc like bdcdata occurs 0 with header line.
*DATA: IT_MESSAGES TYPE TABLE OF BDCMSGCOLL WITH HEADER LINE.
*DATA: LV_MESSAGE(255).
data : it_messages like bdcmsgcoll occurs 0 with header line.
data : V_message(255).
data : V_flag.
data : V_datum1 type sy-datum.
data : begin of it_mesg occurs 0,
message(100),
end of it_mesg.
*V_datum1 = sy-datum-1.
parameters : P_Sess like APQI-GROUPID.
start-of-selection.
perform Get_data.
*perform open_group.
loop at it_lfa1.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-KTOKK'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-KTOKK'
it_lfa1-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-LAND1'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'LFA1-NAME1'
it_lfa1-name1.
perform bdc_field using 'LFA1-SORTL'
it_lfa1-sortl.
perform bdc_field using 'LFA1-LAND1'
it_lfa1-land1.
call transaction 'XK01' using it_bdc
mode 'N'
update 'S'
messages into it_messages.
if sy-subrc <> 0.
if V_flag <> 'X'.
perform open_group.
V_flag = 'X'.
endif.
perform bdc_transaction. "using 'XK01'.
endif.
perform format_messages.
refresh : it_bdc,it_messages.
endloop.
if V_flag = 'X'.
perform close_group.
endif.
*& Form Get_data
text
--> p1 text
<-- p2 text
FORM Get_data .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\srinu_vendor.txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = it_lfa1
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " Get_data
*& Form bdc_dynpro
text
-->P_0061 text
-->P_0062 text
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR it_BDC.
it_BDC-PROGRAM = PROGRAM.
it_BDC-DYNPRO = DYNPRO.
it_BDC-DYNBEGIN = 'X'.
APPEND it_BDC.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR it_BDC.
it_BDC-FNAM = FNAM.
it_BDC-FVAL = FVAL.
APPEND it_BDC.
ENDFORM.
*& Form format_messages
text
--> p1 text
<-- p2 text
FORM format_messages .
loop at it_messages.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messages-MSGID
LANG = 'EN'
NO = it_messages-MSGNR
V1 = it_messages-MSGV1
V2 = it_messages-MSGV2
V3 = it_messages-MSGV3
V4 = it_messages-MSGV4
IMPORTING
MSG = V_message
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write : / V_message.
clear : V_message.
endloop.
ENDFORM. " format_messages
*& Form open_group
text
--> p1 text
<-- p2 text
FORM open_group .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = P_Sess
HOLDDATE = V_datum1
KEEP = 'X'
USER = SY-UNAME
IF SY-SUBRC = 0.
write : / 'Session Creating wit Name : ',P_Sess.
ENDIF.
ENDFORM. " open_group
*& Form close_group
text
--> p1 text
<-- p2 text
FORM close_group .
CALL FUNCTION 'BDC_CLOSE_GROUP'.
ENDFORM. " close_group
*& Form bdc_transaction
text
-->P_0132 text
FORM bdc_transaction. "USING VALUE(P_0132).
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'XK01'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = it_bdc
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " bdc_transaction
Regards
Sreeni
Message was edited by: Sreenivasulu Ponnadi

SQL reporting - An internal error occurred on the report server. See the error log for more details. (rsInternalError)

I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
    <DataSource Name="DataSource1">
      <DataSourceReference>DataSource1</DataSourceReference>
      <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
    </DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
    <ReportParameter Name="machine_id">
      <DataType>String</DataType>
      <Prompt>machine_id</Prompt>
    </ReportParameter>
    <ReportParameter Name="from_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>From Date</Prompt>
    </ReportParameter>
    <ReportParameter Name="to_date">
      <DataType>String</DataType>
      <AllowBlank>true</AllowBlank>
      <Prompt>To Date</Prompt>
    </ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
    <ReportItems>
      <Table Name="table1">
        <DataSetName>Main_Report</DataSetName>
        <TableGroups>
          <TableGroup>
            <Header>
              <TableRows>
                <TableRow>
                  <TableCells>
                    <TableCell>
                      <ReportItems>
                        <Textbox Name="textbox2">
                          <rd:DefaultName>textbox2</rd:DefaultName>
                          <ZIndex>1</ZIndex>
                          <Style>
                            <TextAlign>Left</TextAlign>
                            <PaddingLeft>2pt</PaddingLeft>
                            <PaddingBottom>2pt</PaddingBottom>
                            <PaddingRight>2pt</PaddingRight>
                            <PaddingTop>2pt</PaddingTop>
                          </Style>
                          <CanGrow>true</CanGrow>
                          <Value>=Fields!syscode.Value</Value>
                        </Textbox>
                      </ReportItems>
                    </TableCell>
                  </TableCells>
                  <Height>0.25in</Height>
                </TableRow>
              </TableRows>
              <RepeatOnNewPage>true</RepeatOnNewPage>
            </Header>
            <Grouping Name="table1_Group1">
              <PageBreakAtEnd>true</PageBreakAtEnd>
              <GroupExpressions>
                <GroupExpression>=Fields!syscode.Value</GroupExpression>
              </GroupExpressions>
            </Grouping>
          </TableGroup>
        </TableGroups>
        <Details>
          <TableRows>
            <TableRow>
              <TableCells>
                <TableCell>
                  <ReportItems>
                    <Subreport Name="subreport1">
                      <Parameters>
                        <Parameter Name="machine_id">
                          <Value>=Fields!machine_ip.Value</Value>
                        </Parameter>
                        <Parameter Name="syscode">
                          <Value>=Fields!syscode.Value</Value>
                        </Parameter>
                        <Parameter Name="from_date">
                          <Value>=Parameters!from_date.Value</Value>
                        </Parameter>
                        <Parameter Name="to_date">
                          <Value>=Parameters!to_date.Value</Value>
                        </Parameter>
                      </Parameters>
                      <ReportName>Holding_Summary_Multi_Period</ReportName>
                    </Subreport>
                  </ReportItems>
                </TableCell>
              </TableCells>
              <Height>0.25in</Height>
            </TableRow>
          </TableRows>
        </Details>
        <TableColumns>
          <TableColumn>
            <Width>10.5in</Width>
          </TableColumn>
        </TableColumns>
        <Height>0.5in</Height>
      </Table>
    </ReportItems>
    <Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
    <DataSet Name="Main_Report">
      <Query>
        <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
        <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
        <QueryParameters>
          <QueryParameter Name="@machine_id">
            <Value>=Parameters!machine_id.Value</Value>
          </QueryParameter>
        </QueryParameters>
        <DataSourceName>DataSource1</DataSourceName>
      </Query>
      <Fields>
        <Field Name="syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>syscode</DataField>
        </Field>
        <Field Name="display_name">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>display_name</DataField>
        </Field>
        <Field Name="customer_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>customer_syscode</DataField>
        </Field>
        <Field Name="account_syscode">
          <rd:TypeName>System.Int64</rd:TypeName>
          <DataField>account_syscode</DataField>
        </Field>
        <Field Name="machine_ip">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>machine_ip</DataField>
        </Field>
      </Fields>
    </DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
    offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
    <ReportItems>
      <Image Name="image1">
        <Sizing>Fit</Sizing>
        <Left>8.875in</Left>
        <MIMEType />
        <Width>1.5in</Width>
        <Source>External</Source>
        <Style />
        <Value>bottom_right_logo.gif</Value>
      </Image>
    </ReportItems>
    <Height>0.5in</Height>
    <PrintOnLastPage>true</PrintOnLastPage>
    <PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>

i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this

<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

Error logging on Report Conversion Tool (XIR2)

Similar Messages

Maybe you are looking for