[ERROR] Login Failed - ALUI 6.5

Hi,
After logging in with a valid user, the following error is found:
Error - The server has experienced an error. Try again or contact your portal administrator if you continue experiencing problems.
After logging in with a invalid user, the following error is found:
User or password error
Configurations:
JVM: -Xms512m -Xmx1536m
ALUI 6.5
Oracle 10g express
Apache 2.2
Window XP SP2

portal.arthurpwn-4534634.Administrator 5-21-2010 17:08:44.953 Error Portal_UI_Infrastructure [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.plumtree.portaluiinfrastructure.layout.impl.LayoutManager LayoutManager:GetLayout Could not begin processing web service with Id: 40
com.plumtree.server.marshalers.PTException: -2147203531 - Layout with web service ID: 40 returned error code: -2147203532 and error message: Portlet request timed out: Web Service ID=40, User ID=200, URL='http://arthurpwn-4534634/imageserver/plumtree/portal/private/pagelayouts/basepagelayout.html'
I can access the address normally, but the images do not appear
http://127.0.0.1/imageserver/plumtree/portal/private/pagelayouts/basepagelayout.html
I cant access
http://arthurpwn-4534634/imageserver/plumtree/portal/private/pagelayouts/basepagelayout.html
Edited by: user10602997 on 21/05/2010 13:14

Similar Messages

Entourage error "The server for my email acount returned the error "Login Failed". Your username/password or security settings may be incorrect. Would you like to try re-entering your password?"

I have 1 user on a Mac who just started having a pop up message when opening entourage "The server for my email acount returned the error "Login Failed".
Your username/password or security settings may be incorrect. Would
you like to try re-entering your password?" I know the settings are right because the users mail works on iPhone,iPad,an windows machine. I have deleted entourage plist and also tried a new user same message appears in new user.

See thread here:
https://discussions.apple.com/message/23175721#23175721
It worked for me.

Unhandled Exception Error - Login Failed for User

Hello,
I am receiving an error when I run my application stating “Unhandled exception has occurred. If you click continue, the application will ignore the error………..Login failed for MyUser.
When I click the Continue button the application runs and seems to work properly. This application used to run without receiving the error and I did not make any changes. I have another application that is using basically the exact same code and does not
receive the error. The only difference is the application is querying a different DB but using the exact same connection string. The error only occurs when I run the exe file created from the build. When I run (debug) the application from within the VS 2013
IDE I do not receive the error.
Here are the details to the error message:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.OleDb.OleDbException (0x80040E4D): Login failed for user 'jobrunner'.
   at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
   at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.OleDb.OleDbConnection.Open()
   at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
   at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
   at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
   at LoanOrig_FDIC_Codes.DataSet1TableAdapters.I_LoansTableAdapter.Fill(I_LoansDataTable dataTable) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\DataSet1.Designer.cs:line 1668
   at LoanOrig_FDIC_Codes.Form1.Form1_Load_1(Object sender, EventArgs e) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\Form1.cs:line 152
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
LoanOrig_FDIC_Codes
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///U:/Visual%20Studio%20Projects/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/bin/Debug/LoanOrig_FDIC_Codes.exe
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34238 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
System.Data.DataSetExtensions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.DataSetExtensions/v4.0_4.0.0.0__b77a5c561934e089/System.Data.DataSetExtensions.dll
System.Numerics
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
System.Transactions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I'm not sure what the JIT debugger is but to my knowledge my other apps are not using that. The production username and password are correct in the connection string so I'm not clear why I am receiving this error especially since I'm not receiving the
error on my other application. I have also attached the code just in case it is needed. Any assistance will be greatly appreciated. Thank you.
Dave
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using ClosedXML.Excel;
using DocumentFormat.OpenXml;
using System.IO;
namespace LoanOrig_FDIC_Codes
public partial class Form1 : Form
SqlCommand sqlCmd;
SqlDataAdapter sqlDA;
DataSet sqlDS;
DataTable sqlDT;
SqlCommand sqlCmdCnt;
public Form1()
InitializeComponent();
//BEGIN BUTTON LOAD CLICK EVENT
private void btnLoad_Click(object sender, EventArgs e)
string sqlCon = "Data Source=FS-12345; Initial Catalog=ExtractGenerator; User ID=MyUser; Password=MyPW";
//Set the 2 dateTimePickers to today's date
DateTime @endDate = End_dateTimePicker.Value.Date;
DateTime @startDate = Start_dateTimePicker.Value.Date;
//Validate the values of the 2 dateTimePickers
if (endDate < startDate)
MessageBox.Show("End Date must be greater than or equal to the Start Date OR Start Date must be less than or equal to the End Date ", "Incorrect Date Selection",MessageBoxButtons.OK,MessageBoxIcon.Error);
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
return;
//End of date validation
string sqlData = @"SELECT AcctNbr,
CurrAcctStatCD,
Org,
MJAcctTypCD,
MIAcctTypCD,
NoteOriginalBalance,
ContractDate,
FDICCATCD,
FDICCATDESC,
PropType,
PropTypeDesc
FROM I_Loans
WHERE CAST(ContractDate AS datetime) BETWEEN @startdate AND @enddate ORDER BY ContractDate";
SqlConnection connection = new SqlConnection(sqlCon);
SqlCommand sqlCmd = new SqlCommand(sqlData, connection);
sqlCmd.Parameters.AddWithValue("@startDate", startDate);
sqlCmd.Parameters.AddWithValue("@endDate", endDate);
sqlDS = new DataSet();
sqlDA = new SqlDataAdapter(sqlCmd); //SqlAdapter acts as a bridge between the DataSet and SQL Server for retrieving the data
connection.Open();
sqlDA.SelectCommand = sqlCmd; //SqlAdapter uses the SelectCommand property to get the SQL statement used to retrieve the records from the table
sqlDA.Fill(sqlDS, "I_Loans"); //SqlAdapter uses the "Fill" method so that the DataSet will match the data in the SQL table
sqlDT = sqlDS.Tables["I_Loans"];
//Code section to get record count
sqlCmdCnt = connection.CreateCommand();
sqlCmdCnt.CommandText = "SELECT COUNT(AcctNbr) AS myCnt FROM I_Loans WHERE ContractDate BETWEEN @startDate AND @endDate";
sqlCmdCnt.Parameters.AddWithValue("@startDate", startDate);
sqlCmdCnt.Parameters.AddWithValue("@endDate", endDate);
int recCnt = (int)sqlCmdCnt.ExecuteScalar();
txtRecCnt.Text = recCnt.ToString();
btnExport.Enabled = true;
//End of code section for record count
connection.Close();
dataGridView1.DataSource = sqlDS.Tables["I_Loans"];
dataGridView1.ReadOnly = true;
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
//END BUTTON LOAD CLICK EVENT
//BEGIN BUTTON EXPORT CLICK EVENT
private void btnExport_Click(object sender, EventArgs e)
SaveFileDialog saveFD = new SaveFileDialog();
{ //ClosedXML code to export datagrid result set to Excel
string dirInfo = Path.GetPathRoot(@"\\FS-03250\users\dyoung\LoanOrig_FDIC_Codes");
if (Directory.Exists(dirInfo))
var wb = new XLWorkbook();
var ws = wb.Worksheets.Add(sqlDT);
ws.Tables.First().ShowAutoFilter = false;
//SaveFileDialog saveFD = new SaveFileDialog(); //I moved this variable to the top of the btnExport code block so that the variable will be available thru the entire scope of that code block
saveFD.Title = "Save As";
saveFD.Filter = "Excel File (*.xlsx)| *.xlsx";
saveFD.FileName = "LoanOrig_FDIC_Codes_" + DateTime.Now.ToString("yyyy-MM-dd");
if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.OK)
Stream stream = saveFD.OpenFile();
wb.SaveAs(stream);
stream.Close();
else if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.Cancel)
MessageBox.Show("Save file operation has been canceled", "Save As Canceled", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
//End of ClosedXML code
MessageBox.Show("File has been exported to " + saveFD.FileName, "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
//MessageBox.Show("File has been exported to U:\\LoanOrig_FDIC_Codes", "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
else
MessageBox.Show("Drive " + saveFD.FileName + " " + "not found, not accessible, or you may have invalid permissions");
//MessageBox.Show("Drive " + "U:\\Visual Studio Projects\\LoanOrig_FDIC_Codes" + " " + "not found, not accessible, or you may have invalid permissions");
return;
//END THE SAVE AS PROCESS
//END BUTTON EXPORT CLICK EVENT
private void Form1_Load(object sender, EventArgs e)
//Set dates to be today's date when the form is openend
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
private void Form1_Load_1(object sender, EventArgs e)
// TODO: This line of code loads data into the 'dataSet1.I_Loans' table. You can move, or remove it, as needed.
this.i_LoansTableAdapter.Fill(this.dataSet1.I_Loans);
private void iLoansBindingSource_CurrentChanged(object sender, EventArgs e)
private void btnExit_Click(object sender, EventArgs e)
this.Close();
David Young

In SQL you have a login which allows access to the server but you must also have permissions to access each database that you will use (including Master). So I would verify that your user also has the necessary permissions on the database itself and
not just the SQL instance. The error you're getting is from SQL saying that the user doesn't have permissions. If it works for 1 DB but not the other on the same SQL instance then it is likely a missing permission on the DB itself.
I should note that you have a hard coded conn string in your code but the error is for a different user. I'm assuming that you simply posted it there for convenience and that you changed the values to obscure the data. If you are actually getting
the info from your config file then verify the connection string is correct. Also be sure to not use Integrated Security since it appears that you are using SQL authentication.

Linked Server error: Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON' between sql server 2005 32 bit and sql server 2012 64 bit

Hi All,
Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i access it from
instance 3 i am getting the below error. SPN setting has been done between these 2 servers. Also the option 'Trust the delegate' is enabled for the both the service account.
'Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
Appreciate your quick response.
Vikas.M.S

Hello,
Please read the following resources:
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ea26de43-4c6b-4991-86d7-e1578f107c92/linked-server-login-failed-for-user-nt-authorityanonymous-logon?forum=sqldataaccess
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Gather distribution_name stopped with error: Login failed

Does anyone know what this error means....? I'm getting it on one
distribution I have. I've looked thru the KB and googled it, and can't find
anything that really applies.
Graham

Just an update, but this error went away when I installed Zen7 SP1 (which
seems to be fixing a few of our outstanding issues).
Graham
"Graham Mitchell" <[email protected]> wrote in message
news:mQgdh.9463$[email protected]..
> I've also just deleted and recreated the distribution, and I still get the
> same error.
>
>
> Graham
>
>
> "Jared Jennings" <[email protected]> wrote in message
> news:mf3dh.9087$[email protected]..
>> Graham Mitchell,
>>
>>>
>>>Does anyone know what this error means....? I'm getting it on one
>>>distribution I have. I've looked thru the KB and googled it, and can't
>>>find anything that really applies.
>>
>> It sounds as if the distributor object did not correctly install. Did
>> this just start happening?
>>
>> Have you implemented Universal Password on this tree?
>>
>> --
>> Jared Jennings - Data Technique, Inc.
>> Novell Support Forums Sysop
>> My Blog and Wiki with Tips, Tricks, and Tutorials
>> http://jaredjennings.org
>
>

Like Server error Linked Server error: Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

Getting error when trying to test the link server from remote ... Please help

Hello,
You've supplied us with little information other than what little is in the title. I'll refer you to a post I wrote about this. Please read
through it and post back if it does not fix your issue. There are a few other resource links in the post to check out, but it's most likely related to a Kerberos/SPN issue.
-Sean
The views, opinions, and posts do not reflect those of my company and are solely my own. No warranty, service, or results are expressed or implied.

MS SQL 2008 R2 Named instance: Login failed. Microsoft SQL server, Error: 18452) - Tryig to access using the FQDN assigned for the backup network card.

Hi,
I have a windows 2008 R2 Enterprise servers with standalone MS-SQL 2008 R2 named instance. The server is having two networks, once production and the second for backup. The server FQDN is resolving to the production IP. The backup NIC
DNS dynamic update is disabled and an "A" record is registered with the dns. While trying to connect to the instance using the management studio:
Successfuly able to connect using the instance name, the production hostname, production IP and backup IP.
but while trying to connect to the insance using the backup hostname getting the below error:
"Login failed. The login is an untrusted domain and cannot be used with windows authentication. (Microsoft SQL server, Error: 18452) "
This is required for the backup tool to get connected using the backup FQDN of the server.
Should I need to create a host name alias, request you to kindly assist me with the best recommedation to fix this.
http://blogs.msdn.com/b/dbrowne/archive/2012/05/21/how-to-add-a-hostname-alias-for-a-sql-server-instance.aspx

Hi,
It might be a kerberos issue. Check that there are valid SPN's registered using the setspn utility - http://technet.microsoft.com/en-us/library/cc731241.aspx
Thanks, Andrew
My blog...

While tring to coonect to SQL server from MS excel getting Login Failed error

Hi I am trying to connect to SQL Server DB from another server using the MS excel connect to SQL server in other data sources option.
When I am trying to connect I am getting the following error, "Login Failed For User xxxx\yyyy".
In the DB server this user is the super user and he is having complete set of permissions, need help on this.
Thanks,
Neela Krishna B

As you are using the SQL Server Authentication to connect the database, please make sure you have already check the option 'SQL Server and windows Authentication mode' in your DB Server, also check if this login account is enabled.
If you can connect the database with this login account in this server using SSMS, You can connect the database in Excel too.
Wind Zhang
TechNet Community Support

Login failed for user 'NT AUTHORITY\ANONYMOUS

Hi All
I have already gone thru lot of links, So appreciate if i can have some solution
I have 3 servers A, B and C . A and B are in same domain and C is in different domain. and I am sysadmin in all 3 servers and all have trusted connection with each other
1. All have tcp and named pipe enable
2. All 3 servers and all services including browser are up and running
3. When i connect any sql server from any Server using SSMS i am able to connect and (net_transport, auth_scheme = TCP , NTLM).
Now i create linked server at server B to Server C (C domain is different than A and B). When i login on Server B and try to run query on C its working fine. But after remote login to server A and connect sql server at B using SSMS when
i expand linked server to c i cant see databases and query is giving error "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'"
I also tried to connect to all 3 server in ssms using forced named pipes but i am getting below error
"provider named pipes provider error 40 - Could not open connection to sql server"
My question :
1. I have to use domain account to use linked server from server A to connect SQLserver B to server C, How this can be done is this related to Double hop ??
2. Why i cant connect using forced Named pipe to any server using SSMS except local host
Thanks Saurabh Sinha http://saurabhsinhainblogs.blogspot.in/ Please click the Mark as answer button and vote as helpful if this reply solves your problem

Hello,
First, it is possible to use Kerberos delegation across trusted domains.
net_transport, auth_scheme = TCP , NTLM
This means something isn't correctly setup as you're defaulting back to NTLM. This should read Kerberos if your SPNs were setup correctly and authenticated properly. Check the SPNs and service accounts.
http://technet.microsoft.com/en-us/library/cc280744(v=SQL.105).aspx
1. I have to use domain account to use linked server from server A to connect SQLserver B to server C, How this can be done is this related to Double hop ??
To go across domains I'm not entirely sure on that part, but I can say it'd probably be easier if you did use a domain account as the service account.
2. Why i cant connect using forced Named pipe to any server using SSMS except local host
I'm not quite sure what you mean here. You can't connect through NP? Why the need for NP at all?
Sean Gallardy | Blog |
Twitter

SUP and SQL login failed

Hi,
Been racking my brain about this one, searched online (including here) but haven't found a solution yet. My scenario is: SCCM 2012 R2 and SQL 2012 (with databases CM_SCM and SUSDB, instance name is MSSQLSERVER) installed on the same server. SCCM will only
be used to build servers using TS. I'm using SCCM as a SUP to do offline servicing of the wim files. This setup was working up to several weeks ago (don't know exactly when it stopped) and since, whenever I do a software update sync, I get
'Sync failed: WSUS server not configured. Please refer to WCM.log for configuration error details.. Source: CWSyncMgr::DoSync'.
Checking the WCM.log I get the following error:
System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'DOMAIN\MACHINENAME$'.~~ at Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow(SoapException soapException)~~ at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetConfiguration()~~
at Microsoft.UpdateServices.Internal.BaseApi.UpdateServerConfiguration.Load()~~ at Microsoft.UpdateServices.Internal.ClassFactory.CreateWellKnownType(Type type, Object[] args)~~ at Microsoft.UpdateServices.Internal.ClassFactory.CreateInstance(Type
type, Object[] args)~~ at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetConfiguration()~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.SetUpstreamServerSettings(Boolean SyncFromMicrosoftUpdate, Boolean ReplicaServer, String
UpstreamWSUSServerName, Int32 UpstreamWSUSServerPortNumber, Boolean UseSSL, Boolean HostBinariesOnMU, Int32 ReportingLevel, Int32 MaximumAllowedComputers)~~ClientConnectionId:00000000-0000-0000-0000-000000000000
If I then check the SQL Server log, I have (over and over again) the error:
Login failed for user "DOMAIN\MACHINENAME$". Reason: Could not find a login matching the name provided. [CLIENT: <local machine>] - Error 18456, Severity: 14, State: 5
According to http://sqlblog.com/blogs/aaron_bertrand/archive/2011/01/14/sql-server-v-next-denali-additional-states-for-error-18456.aspx , state 5 indicates (as the error msg mentions) that the login doesn't exist, however in the SQL server it does exist
and is also present under both DBs\Security\Users.
There was no SPN set for the service account I created when setting the server up (in this case sccmsql), I've now set it manually to MSSQLSvc/FQDN:1433, as mentioned in http://technet.microsoft.com/en-us/library/hh427336.aspx#BKMK_ManageSPNforDBSrv
, but without any luck.
Thanks in advance for reading this.
Dan

Dan,
Remove the SUP role. Remove WSUS and delete the SUSDB. Reboot the site server and reinstall WSUS and SUP. It'll recreate all the required permissions as part of the install.
Cheers
Paul | sccmentor.wordpress.com

"Login Failed for user" in Standard Report Creation Wizard

I am trying to create a report using the report wizard in CR 08. When I choose new connection ==> OLE DB(ADO)==>Microsoft OLE DB Provider for SQL Server and enter the Server and user ID (no password), I get the error "Login failed for users".
SQL State: 42000
[DataBase Vendor Code: 18456]
I was using CR 10 and called the 1-866 # and was told to try it wil CR 08 and Im getting the same error. I know the log on information is correct because I use the same server name and userID to login with SQL Server management studio and Visual Studio 08.
Please let me know what I can do to link CR to my SQL Database.
Thanks,
John

How is your user accessing the site?
Did you extend it to a different zone, and if so what authentication provider are you using for that zone or is it the same zone?
Looks like the domain is a workstation name? are they logging in with valid credentials for the WIN-IMH9QUCN1FU workstation, which may be different than what they usually log in as?
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Integrated Security results in Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON' after code deployment

Sometimes, when we deploy new code to the server, we're getting the following error:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
we're using windows authentication and in our connectionstring use integrated security.
Only after restarting the server, the application can connect to the DB again. restarting IIS or recycling the application pool doesn't help.
Our application pool is configured using ApplicationPoolIdentity and we would like to keep it as such.
Any idea what we can do to prevent this error from occurring almost every time we deploy code?
Thanks

Hi amisol,
Thanks for your post here.
For your issue is related with asp.net security ,i suggest that you can post your issue to the link below:
http://forums.asp.net/25.aspx/1?Security
Best Regards,
Kevin Shen.

Accessing WebDynPro - Login Failed

Hi
Facing the Login failed error , though the User exist in SRM-MDM-Catalog Repository while Using the URL http://..MDM SERVER Host../ webdynpro/dispatcher/sap.com/tc~mdmsrmui/MDM_SRM_UI_App.
When it promps Server, after entering the server name ,under the Login Repository pops ups in drop down box,, then if we try to login.. getting an error "Login failed"
Pls let me know any other settings....

Hello,
I face exactly the same problem.
Please help!
In this thread or in
Re: Login problem in SRM MDM Catalog
Many Thx in advance!
Felix

SQL server(PC1) --- PC2: Login failed. The login is from untrusted domain and cannot be used with windows authentification

Hey,
I'want to make connection from my laptop(xxx.xxx.xxx.xxx = A) to a fixed computer(SQL server xxx.xxx.xxx.xxx =B). My connection string = "Provider=SQLNCLI11; Data source:name-pc/SQLEXPRESS; Integrated circuit=SSPI;Intial Catalog=Database name for visual
studio C#.
Laptop -> PC1 : Eror
It works when i use localhost or 127.0.0.1 and i can read my database without any problems if i install SQL server on my laptop. Know i install it to PC1 and uninstall on my laptop. When i change the name-pc by an ip-adress i get this error: Login failed.
The login is from untrusted domain and cannot be used with windows authentification. I did some research on multiple forums where they say about Local security policy(secpol.exe) but i don't have this file.
PC2-> PC3: work fine but i want to work with my laptop and i don't understand why it isn't working with my Laptop.
Can someone help me?
Thx a lot and sry about my english(its a disaster)
Thibaut

Hello,
Yes, for the Windows Authentication to work you should be using the same Windows account and password.
Are you willing to create SQL logins inside SQL Server and allow your users to connect to SQL Server using SQL Authentication
instead of Windows Authentication? That could be a solution on a workgroup network.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Database Login failed for SIDADM

Hi,
I've installed a Solman system & the system starts just fine (even post OS reboots), however the problem is that sidadm is unable to connect to the database.
Administrator is able to connect just fine.
r3trans also ends with the same login failed error:
Login failed for user 'hostname\soladm'. [CLIENT: <local machine>]
Error: 18456, Severity: 14, State: 11.
I can't seem to find anything concrete on this.
Pls. help.
Thanks,
Saba.

Wowie:)
Disable UAC did the trick !!!
Thanks Markus n Sunil )

[ERROR] Login Failed - ALUI 6.5

Similar Messages

Maybe you are looking for