Error Mes. While riversing of MIRO-The price for material will be negative

Hi,
When doing cancellation of MIRO the system is throwing error message as below.
The Price for material 476178 will be negative
When analysing purchase order it is identified that invoice TAB of Item Details in PO is not checked with GR-Bsd IV, So in this case IR happened before GR and still GR has not happened.
But when doing cancellation of the above MIRO the system is not allowing to cancel this MIRO and throwing the above error message.
Please let us know how to cancel the IR.

Hi,
u cant cancel any entries in FI, u need to reverse the entries with t code FB08.
While Creating the PO if u select GR based then the invoice always depend on MIGO transaction
where u receive the good and u get the Off setting entry GR/IR entry.
if u are not selecting the GR at PO Creation then, invoice does not depend on MIGO transaction.
then the invoice is blocked for payment
try to reverse the MIRO with the T code MR8M.
Regards,
Padma

Similar Messages

MR11- The price for material && will be negative - Material Ledger Active

Hi All,
The material ledger is active and user is getting error message "The price for material && will be negative" while doing MR11. I found the below SAP Notes:
sapnote_0000010757_FAQ MR11, clear GRIR clearing account
sapnote_0000174684_Procedure for error C+121C+131, price
sapnote_0000320941_Posting in spite of negative price
sapnote_0000790426_MR11 Functionality
I found SAP Note: 174684_Procedure for error C+121C+131, price , but it seems to give a temporary solution of changing the price using MR21 / MR22. The error has become very frequent.
I appreciate, if someone can help me know the pros and cons of using MR21/MR22 transaction when material ledger is active, because I am not able to figure out where will the MR21 / MR22 transaction have impacts in MM and CO?
Is there anyway to do away with the recurrence of Error message permanently?
Thanks in advance!!!
Sagar K.

Hi:
This error occurs when PO price does not match with Moving average price in Material price.
First check the price in PO and in Moving average price in Material Master. If the Moving average price is less than PO, go the T.code MR21 to change the moving average price to PO Price.
Also check T.code MRBR - it will show why the invoice is blocked.
Please let me know if you need more information.
Assign points if useful.
Regards
MSReddy

MIRO Error - The price for material X will be negative

Dear All
When create invoicing in Tcode MIRO, have message error
The price for material X will be negative
Message no.C+131
Diagnosis
the system calculated a ngative moving avarage price for the material
System response
the moving avarage price is set to zero for material with price control S
Processing is terminate for materials with price control V, because the system is not set up to handle negative prices for such material
The message Error will solve, after there is new GR from vendor.
are there anyone can help my problem
regrads
imron

Dear Gregory Mathews,
thanks for your response
the price contrl for the material is set as 'V' and the standard price for the material is 0
And qty Stock < qty invoicing
My question is:
1. My stock < qty invoicing was caused by material used, whereas invoicing from vendor not yet come so that invoice created after material used, --> How to solve ?
2. I agree with your statement that "The error will come either if the price contrl for the material is set as 'S' and the standard price for the material is 0.
Or if there isn't enough stock coverage" --> how to solve for next time
regrads
imron

DBD: An error occurred while trying to load the provider for transport odbo

Hello,
I am trying to create universe on top of BPC cube using 'Business Planning and Consolidation' option under SAP Business Objects in Universe Designer ; however when creating connection I am getting following error messgae
"DBD: An error occurred while trying to load the provider for transport odbo. Failed to load library . System error message: The specified module could not be found."
I am using BO 3.1
Is anyone aware of this issue? Kindly assist.
Thanks

We were having the same problem, found this note in the SAP KB
https://websmp130.sap-ag.de/sap/support/notes/1321459
Mike

Error - DBD: An error occurred while trying to load the provider for ...

Error - DBD: An error occurred while trying to load the provider for transport odbo.
Failed to load library. System error message: The specifed module could not be found.
While I am trying to create connection in universe designer to MS Analysis Services 2005.
Thank you - Ashok
Edited by: akojha on Jan 4, 2010 5:27 PM

We were having the same problem, found this note in the SAP KB
https://websmp130.sap-ag.de/sap/support/notes/1321459
Mike

I keep getting an error message while trying to download the cd for my Epson SX515W Printer

Can any one help me with this problem? I keep getting an error message while trying to download the cd for my new Epson Stylus SX515W series printer.

Contact Epson's support and read the troubleshooting section of their manual - http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-SX515W/Driver s-Support

DBD: An error occurred while trying to load the provider for transport sap.

Hi,
I just installed the BO XI 3.1 SP2 & SAP integration KIT 12.0 and could able to import all the roles from SAP client in BO CMC.But when i am trying to create new Universe & creating a connection to SAP it is throwing an error " DBD: An error occurred while trying to load the provider for transport sap.System error message:The specified module could not be found ".
I even applied FIX packs 1.7 & 1.8 for both BOXI 3.1 & SAP Integration KIT,but still throwing the same error.
Could any please help me out in this issue.
Thanks in advance,
Sanjay

Hi,
this looks like a Bug:
Check SAP Note - 1365062
I would recommend installing SP2 for BOXI 3.1
Regards
-Seb.

Posting of miro doc: Error as "Moveing aveage price for material negative"

Hi All,
Here is an Uregent issue
Client has done MAP for material as Zero (MR21)
before that,
import PO with fright clearing vendor but added in the same
vendor and payment is done already .
but as he had made MAP as Zero
know when post the PO the system is through the error
as" Moveing aveage price for material is negative",
know the client wants the MAP to be increased to Some
value for that material.
pls give some solution to it !
Regards,
Rajashekhar

hi,
Use T.code: MR22 to increase the qty from ZERO to whatever qty then you can verify the MIRO
G.Ganesh Kumar

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

I finally got my iphone out of recovery mode, after 7.1.1 but now it won't accept my Icloud info and states "An error occrured while trying to save the Icloud account?" What do I do????

I tried updating my iphone 4 to 7.1.1 and it went straight into recovery mode.... I finally got my iphone out of recovery mode, but now it won't accept my Icloud info and states "An error occrured while trying to save the Icloud account?" What do I do????

Same situation. I installed iOS 8 beta 4 on my iPhone 5 and a few days later my iCloud account disappeared. My contacts and calendar entries are gone.
My Mac Mini and MacBook do sync as they should with iCloud.
When I try to log in to iCloud on the iPhone (the username shows "[email protected]" and password shows "required"), I put in my username and password and tap "Sign In", It says "Verifying" at the top and after a while checkmarks appear next to my username and password. Then I get an error message saying "An error occurred while trying to save the iCloud account". If I tap OK the message goes away, leaving my username and password intact (checkmarks are now gone). If I tap "Sign In" again I get a message saying " '[email protected]' is Already Added. This iCloud account has already been added to your iPhone". If I go back to Settings and then go into iCloud again it's not set up and appears as I stated at the beginning of this paragraph.
Nothing works and the sync does not occur. Contacts are empty and Calendar has no entries.

An error occurred while trying to access the service?

I'm trying to convert a PDF into Excel but I get the message 'an error occurred while trying to access the service'.
I have tried logging into my Adobe account online and doing it within there, but once I have exported the file and pressed 'convert' it simply says 'conversion failure' with no explanation.
My subscription is still valid, so I don't see why the problems? Has anyone else had this issue and managed to fix it? I get the error message regardless of whether I'm trying to convert to Word or Excel.
Any ideas greatly appreciated!!
Thanks
Sophie

Hi SHurcs,
I'm sorry that you're having such trouble with your ExportPDF subscription. Does this error occur for one particular file, or with any file that you try to convert? What operating system and browser are you using?
To get us started, here are a few things that you can try:
In Reader, sign out, and then sign back in.
Use a supported web browser: http://www.adobe.com/acom/systemreqs/
Clear the browser cache.
If you're using a networked computer, make sure that there are no firewall/proxy settings that prevent you from uploading files to the Internet.
Make sure that the files you're trying to convert are within the file-size limits for ExportPDF (100 MB).
If the problem persists, please let us know, and tell us a bit more about the files that you're converting.
Best,
Sara

An error occured while trying to access the service

i'm continually having issues with trying to convert my files from PDF to excel. I keep on getting the error message "An error occured while trying to access the service" with no real explanation as to what is wrong. I've tried several times on several different computers, logging on and off, changing users...same message everytime. I have a time sensitive project to complete, and can't get it done if this conversion can't be done. HELP!

Hi J,
Here are a couple documents that may assist you:
'Getting started' guide
FAQ
Let me know if those help!
Kindest regards, Stacy

Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
Sequence of events:
The main error message is always:
An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
Yesterday, I opened Disk Utility and verified the disk. Got this error:
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
Starting manual backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Found 145601 files (11.88 GB) needing backup
16.1 GB required (including padding), 620.77 GB available
Copied Zero KB of 11.88 GB, 0 of 145601 items
Copied 0 files (Zero KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
Ejected Time Machine network volume.
Starting automatic backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
Does anyone know what the problem is here and what I should do?
Thanks,
Tery

You have repaired your boot drive (which is good) but have you repaired your time machine drive? I don't own a Time Capsule so I don't know if disk utility can operate on it. If it can, you should repair it as well. You may need to erase it and start a new backup. That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

"An error occurred while extracting files from the package "BaseSystem.pkg".

Hello!
I have a
MacBookPro5,5
Prozessortyp:Intel Core 2 Duo
Prozessorgeschwindigkeit:2.26 GHz
Anzahl der Prozessoren:1
Gesamtzahl der Kerne:2
L2-Cache:3 MB
Speicher:2 GB
Busgeschwindigkeit:1.07 GHz
Boot-ROM-Version:MBP55.00AC.B03
SMC-Version (System):1.47f2
Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
Problem:
I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation: 139 MB wired, 259 MB trapped, 397 MB active, 7 MB inactive, 1246 MB free, 1650 MB usable, 2048 MB total

It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

An error occurred while attempting to perform the operation.

Hi All,
I am getting an error while running the report:
"An error occurred while attempting to perform the operation. Then operation did not complete successfully."
Although I can see the data coming is correct, but don't know why this error is coming.
I have seen for NULL values.
How can I see the detail log to trace the error?
Please help.
Thanks,
Himanshu Tiwari

Hi,
You can login as system using SQLPlus and use the DBMS_SYSTEM.set_sql_trace_in_session procedure to set trace on another Discoverer session. This should establish if there is any database error occuring in the Discoverer session.
Rod West

Error Mes. While riversing of MIRO-The price for material will be negative

Similar Messages

Maybe you are looking for