Error Message: Code could not be generated successfully for the VI
I created a simplified model of an 8-pole DC servo motor with friction brakes that drives an actuator through a gear train. I can't get past the subject error message. The error is about the VI named ""Sermat 3-Phase 8-Pole Motor with Friction Brake"" in the package attached. One thing I noticed is that when I make any minor modification to this VI, even a trivial one (like multiplying a signal by a gain of one, or changing the value of a gain from a to b) the VI stops complaining for a while and simulates/runs well. But as soon as you close the VI and open it up again, it goes back crazy on you again.
I appreciate if someone can guide me as to why this happens an what am I doing wrong here. Appreciate the help :-)!
Regards,
Akif
Attachments:
Motor VIs.zip 508 KB
I am getting this same error which you have already helped somebody else with. Could you be kind enough to help me too. I am attaching my VI, it contains only a Mathscript node whose commands work perfect when typed individually on the Mathscript window.
Regards,
Karan Batra
Attachments:
mathscript_tests.vi 16 KB
Similar Messages
-
Compile error (Code could not be generated)
When I try to run the attached vi I get the following error message "Code
could not be generated correctly for this VI."
I use Labview 7.1 under Windows XP.
Attachments:
ParSettings.zip 293 KBThe "Representation" enum is defined differently in the "SDO Par In", "SDO Par", PDO Par In" and "PDO Par" clusters. Labview does apparently not recognice this and crashes instead of warning for incompatible data types.
-
I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013. I keep getting the error message "iTunes could not back up iPad "" because an error have occurred." Any suggestions on what I can do to resolve this error?
Hi there BuffaloSailor!
I have an article here with some troubleshooting suggestions for this issue:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Code could not be generated because an external component or driver is missing
Greetings All,
I've using Labview for a little over a year and I have an interesting situation with regards to Labview that I came across today. When I left off yesterday (01/11/12) my TestStand sequence was compiling fine. Today for some reason the compiler told me that one of the VI was broken or missing a sub vi. When I made my way through all the sub vi's in the vi that seemed to be a problem I came across "Code could not be generated because an external component or driver is missing".
The problem started on the computer (NI PXI-8101 with WinXP and Labview 2010) located in a PXI-1044 that is in my Test Stand. I have a complete backup on my laptop and my desktop computer which both compiling successfully with no errors. I tried installing the directory on another PXI-8101 and got a different set of results. The first PXI-8101 gave 100+ errors in TestStand pointing to one of my vi's and the other PXI-8101 reported only one (1) error. The vi is basically using DAQmx vi's to create a "write to one line" action. I'm kind of stumped as to why it works on the laptop/desktop and not the PXI computers. All four computer are WinXP professional and Labview 2010. I saw somethings through google search engine but nothing conclusive. I'm hoping that someone can give me an explaination as to what is causing the error as described. Even if I copy over the directory it doesn't fix the problem. Thank you in advance for an information you provide with this rather interesting problem that I've encountered. If you require addition information let me know.
Regards,
Scott
Solved!
Go to Solution.Greetings Beau,
Thank you for the reply.
I loaded the offending VI into Labview (2010) with TestStand inactive. Of course this was after I completely shutdown the computer and re-booted to ensure that nothing was resident in memory. I've included a couple of the error list boxes in this post.
It comes down to a subvi that is two (2) subvi's deep. All these vi's are doing is commanding a write or read to and from the PXI-6509. When I check the VI at the level that has no broken run arrows (named below), nothing in the block diagram looks out of place as it should since these were installed by Labview installation. The vi that uses these vi's looks total normal and its block diagram doesn't have anything out of the ordinary yet the run arrow is broken. The odd part of this is that the top of the window that states the filename of the vi has an astrex at the end of the filename, even though nothing has changed in that vi.
Here is a list of the deepest level that has no broken run arrow:
DAQmx Create Channel (DI-Digital Input).vi
DAQmx Start Task.vi
DAQMX Read (Digital Bool 1Line 1Point).vi
DAQmx Clear Task.vi
DAQmx Create Channel (DO-Digital Output).vi
DAQmx Write (Digital U8 1Chan 1Samp).vi
I guess the real question is what is the error message ("External component or driver missing") really telling me if all of the vi's look right. I appreciate any information you can send my way that will give me a better understanding of where this error is coming from. The program I developed had been running without a hitch for a month an all of sudden crash.
Thank you for your time in this matter.
Scott
Attachments:
Write to one port broken VI error list.JPG 47 KB
Readfrom one line broken VI error list.JPG 46 KB
Broken_VI_Error_Screen.JPG 56 KB -
Simulation Loop: Code could not be generated correctly for this VI
Running LabView Simulation 8.2 on Windows XP laptop. I have a Simulation Loop that keeps generating the following error message:
"Simulation Loop: Code could not be generated correctly for this VI"
The only reference I can find in my searches is to using an RTX target, which does not apply. When I click on Show Error it just highlights the Sim Loop
Any ideas on how to debug this?Perhaps you can start removing things until you don't get the error any more. How big is the code in the loop?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/ -
Error message: itunes could not connect to the itunes store
Hi All,
I'm a rookie to the whol Apple ipod nano, etc, etc. I bought the generation 3 nano yesterday. I successfully downloaded a CD to the nano, but when i tried to download a tv show and open itunes i get the follow error message:
"itunes could not connect to the itunes store. Make sure your network connection is active and try again."
The funny thing is, is that i'm not even on a network. I'm just doing this from home and not connected to a network. internet connection works, I ran the diagnostic and nothing weird came up? Any suggestion for a newbee.Hi, I am having the same problem and I get the message: "iTUNES could not connect to the iTUNES store. Make sure your network connection is active and try again." I just downloaded 2 songs no problem, after uploading the latest version on iTUNES online. I closed the program and tried again, same message. My cable internet connection works just fine, so I am assuming the problem is on their end. I will check in with you guys to see if someone figured it out.
Thanks
WP -
Error "Jurisdiction code could not be determined" in so create bapi
I am using the bapi "SO_NEW_DOCUMENT_ATT_SEND_API1" for creating the sales order,
it gives the error "Jurisdiction code could not be determined" Sometimes there are two juridiction code maintained in the system .
1) During the ship to party address change at sales order , city , country and postal code fields determine the Juridiction codes. Sometimes there are two juridiction code maintained in the system for one city and in such cases BAPI fails to create an order.
2)When the ship to party is foreign country then we do not need Juridiction code in sales order. In such cases also the BAPI fails to create sales orders and writes an error log , saying juridition code could not be determined.
Proposed Soltuion.
We have to modify the BAPI to force the values of ship to address as it is from the text file without exiting the sales order creation.
Thank You,
Ganeshhi ,
u need to give the right postal address. If it is then it won't give the warning message.
Regards,
Rose. -
Continue to get error message "backup could not be completed" after purchasing additional storage
continue to get error message "backup could not be completed" after purchasing additional storage
Just wanted to update the community on my exciting adventure to fix my ipad;
I made my way over to the Apple Store here in South Florida and had my appointment with the geniuses. No one could figure this sucker out! They did every thing they could think of to the ipad without success. Couldn't even tell me what the problem was. All were very nice about it, of course. I was told to wait a day while they contacted the great and powerful central genius(es) but apparently no one was home there since they never responded to the request for help.
Anyway, I will go back to the Apple Store one more time before I give in to the conclusion that my 3 year old iPad (original) is DOA -
I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.
One thing that might help.
1. open itunes preferences from the edit menu and click on the devices tab.
2. check the box to disable syncing for iphones connected to itunes and click ok.
3. Then click the button to reset sync history.
4. Now click ok to close the preferences window.
5. connect the iphone to itunes and go to the info tab.
6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
7. then click apply on the bottom right of itunes.
This will overwrite any events on the iphone, including any events that has become corrupted.
Hope this helps -
I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?
I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%% -
I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes
Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
How to get rid of the error message we could not complete your iTunes store request?
How to get rid of the error message we could not complete your iTunes store request?
having this problem when trying to authorise an newly downloaded app in iTunesBased on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
Do not change your settings.
Edit -
When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils
Can someone help me with this issue please? Tkshttps://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…
Maybe you are looking for
-
What is maximum column name length?
What is the maximum column name length in Oracle (XE) ? Peter
-
Ical very slow!! 18,145 .calender folders!!
I just upgraded to Panther the other day... no problems. I go into work Monday and mail start to run slow also iCal takes forever to load and when it does iCal has double and tripled the events on the left... and by tripled i mean their are 100's. I
-
I am trying to run a simple test program to unmarshall and XML doc and am getting the following error: [erdos OpenOfficeDev]$ ./java_jaxb.sh unmarshall sampleDoc.xml JAXBLIB /opt/tomcat50-jwsdp/jaxb/lib CLASSPATH /opt/tomcat50-jwsdp/jaxb/lib/jaxb-api
-
My nano won't play .GIF files! How can i fix this?
My iPod Nano displays all of the supported picture files except for the .GIF's Is there something I must do to enable the viewing of a .GIF file or does it just not support it? (although everywhere I've looked it sais it is) I have a Black 4GB iPod N
-
i know the first thing that you guys will think is that i need to change my security preferences to where i can download programs from anywhere but thats not the case... when i go to try to install a new program i double click on the installer and i