Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

Hi All,
I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
(We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
Thanks in advance.
Ameesha.

Hi Ameesha,
i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
try this once.
All check this link.
[Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
Hope it helps.
Regards,
Raj

Similar Messages

  • Data from Business Add-In ME_PROCESS_PO_CUST not adopted

    Hi,
    I am trying to find out an exit or badi for Updating Tax Unit of Measure in transaction ME21n.( Auto Po Creation)
    The scenario is like this...
    The system assumes Base Unit of Measure for all its calculations. If the order UOM of a part happens to be different from the base UOM or if an alternate UOM then the system should consider the UOM.
    The Base UOM needs to be passed to BAPI during the upload process into SAP so that the ORDER will either be created in the base UOM or the appropriate conversion factor will be taken into account when calculating the order quantity if the order UOM happens to be different from the base UOM.
    If no UOM is specified in the input of the BAPI call then the system should put the base unit of measure for the part instead.
    For the above I have written logic in BADI ME_Process_PO_CUST and Method Proess_Item..
    The code is below,
      select single meins bstme into (wa_meins, wa_bstme) from mara where
      matnr eq wa_mepoitem-matnr.
      if not wa_bstme is initial.
        if wa_mepoitem-meins <> wa_bstme.
          wa_mepoitem-meins = wa_bstme.
          call method im_item->set_data
            EXPORTING
              im_data = wa_mepoitem.
        else.
          wa_mepoitem-meins = wa_meins.
          call method im_item->set_data
            EXPORTING
              im_data = wa_mepoitem.
        endif.
    When I try to create purchase order ,I am getting the following error message...
    Data from Business Add-In ME_PROCESS_PO_CUST not adopted
    Message no. MEPO151
    Diagnosis
    An endless loop occurred during the processing of the Business Add-In ME_PROCESS_PO_CUST. The system terminated the processing.
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    Check whether standard fields are changed in the implementation of the Business Add-In ME_PROCESS_PO_CUST.
    Changes to standard fields that are part of the Include structure MEPOITEM_TECH and/or MEPOSCHEDULE_TECH are generally not allowed. In addition, no field values that are not changeable through the field settings in the Enjoy transactions can be changed in the BAdI. Correct the implementation accordingly.
    Let me know if anyone face the same issue..
    Regards,
    Kumar

    Hii Shahin ,,
    Thanks for your information but I have done that also  and found Message in Se91 and find message is triggering from another Standard Class CL_PO_HEADER_HANDLE_MM from method IF_FLUSH_TRANSPORT_MM_START so How can we confirm that problem is in Implementation not in method IF_FLUSH_TRANSPORT_MM_START ?
    Thanks

  • HTTP-500 Error Reading Data from Client!!

    I'm trying to create a page where by clients are able to contact us through the portal. So, it's a pretty basic form where I have a text box for the subject, and a text area for the message body.
    My problem is when the message body is over a certain size, I'm getting a "portlet cannot be contacted" on my screen. The Apache log comes up with the error:
    [error] mod_plsql: /pls/portal/!PORTAL.wwpob_page.show HTTP-500 Error Reading Data from Client!!
    I'm not using a windows OS, so the bug that has been talked about previously talked about shouldn't be the problem.
    Also, I am using a POST rather than a GET, so I don't think it has to do with the browser (and I have tested this on Firefox and IE 5.5 and IE 6).
    Would appreciate any advise.
    Thanks, Nicky

    Are you using SSL? Maybe, it has to do with it. I encountered a similar problem. It turned up that this read error occurred inside Apache and was caused by a nonstandard-SSL-request by Internet Explorer. te remedy was to add this to the Apache configuration:
    SetEnvIf     User-Agent     ".*MSIE.*"     \
    nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
    It tells Apache to switch to HTTP/1.0 and to never keep open socket connections with MSIE on SSL connections.
    Lycka till!

  • I get error message when trying to add key tags

    I get error message when trying to add key tags

    You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
    You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

  • Error message when deleting Business transaction: Activity in CRM

    Hi All,
    I am trying to delete a couple of Activities from CRM (Production system) and encounter two error message: "Enter a Business Partner" and "Administration header not found."
    I have tried three ways to delete/archive the activity numbers in the system:
    1) Using T code: CRMD_ORDER and then while in change mode - trying to delete the activities. When I tried this I get a warning message: "Enter a Business Partner" after I hit enter the warning: "Administration header not found." comes up and then takes you to the Easy access Menu after hitting enter.
    2)   I used T code SE38 to open program: "CRM_Order_Delete", here I entered the activity #s that I want to delete, the Activity Transaction type, select check box "Parallel" and then execute. I see a job log which says "Number of archived records = 3", the log shows that no records were deleted.
    3) I have also tried archiving using T code SARA. But this also didn't seem to work. Here, I entered the Archiving object: CRM ACTON, then click on Preprocessing. I created a variant with the transaction type and activity numbers then set the start time to immediate and executed (F8) it. Even then I was not able to archive these activities. I did set the activities to status Complete.
    Am I missing something? Appreciate your help.
    Regards,
    Ramesh
    Edited by: Ramesh Nallabelli on Oct 9, 2008 9:55 AM

    Received response from SAP support partner:
    Please verify first if the issue is caused by badi implementation
    of ORDER_SAVE badi. Please check method prepare and check_before_save.
    Maybe inside your implementation the function crm_order_read is called
    but that is not possible in case of deleting a document as document is
    not available anymore.
    If that doesn't work try this one:
    Please check to see if you have a badi ORDER_SAVE method
    CHANGE_BEFORE_UPDATE. Please deactiviate the ORDER_SAVE Badi and retestthe deletion.
    This is how we resovled our issue - hope this helps someone else:
    Check using T Code: SE80 to look for a BADI implementation which used BADI: ORDER_SAVE:
    SE80-> Package: Z* (look for custom packages) -> Look under enhancements for any BADI Implementations which have used ORDER_SAVE (double click implementation and in the right pane look under Definition name).
    Click 'Change' and deactivate this implementaiton. Now try to delete the CRM transaction. The error msg should not pop up now. Once deletion is completed reactivate this implementation.
    This is just a work around. The problem lies in the code and the code within the implementation should be debugged and fixed so that this error message does not come up again.

  • TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

    My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

    Be sure to try restarting, if you have not done so since this problem occurred.  You should also power off the printer while you do the restart...
    If that does not help, you can try resetting the printing system.  Open System Preferences Print & Scan (or Print & Fax) pane.  In the sidebar with list of printers, right (control) click anywhere.  Select Reset printing system.  You will have to add back your printers after you do this.

  • EVDRE encountered an error retrieving data from the Web Server

    Hi,
    I'm working on a presales AppSet "Demo5b".
    When I create a brand-new EVDRE report on FINANCE app, there is no problem.
    However, after changing to ICMATCHING app, when I type =EVDRE() on a blank sheet and press Refresh, the following message pops up.
    EVDRE encountered an error retrieving data from the Web Server
    Retrying in (??) seconds
    Any idea why this happens and how it can be solved?
    Thanks!
    Sunny

    Hi Joost,
    I have the same problem. When I try to retrieve data on an input schedule is launched that error.
    I am working on an VM on MS BPC.
    I am not working with cubes so the solution is not the same.
    If i process all my dimensions this error does not appear any more?
    Best regards,
    Vitor

  • Error message PLEASE ENTER BUSINESS AREA

    Hi experts,
    Facing problem while doing 531 movement for by product generation by MB1A.
    Getting error message  PLEASE ENTER BUSINESS AREA.
    and for same material accounting document not heat.
    experts suggestion need to resolve issue.
    Waiting
    Bhupendra

    Business area is Pulled based on Division assignment
    Assign the division for that material in basic data view
    and then post

  • Error message F5901-Enter Business Place Value

    Hello Friends and experts,
    I am trying to enter a cross company code vendor invoice posting (vendor line in one company and all the expense lines in multiple co.cds). When I try to post the entry I am getting error message F5901 - Enter Business Place Value.
    The error is coming after we have upgraded to ECC 6.0 EHP5 from ECC 5.0 SP13.
    I have checked the customizing. We have not activated Business Place functionality for any country in our system.
    I did not even find any SAP note in this regards.
    Does someone has any clue on what may be wrong and how to fix it?
    Regards,
    Vishal.

    Hi Tanmay,
    You might have created a validation rule for Business place in order to track the TDS as per Business place. Please check it in GGB0 and OB28 and input the Business place at transaction level if needed.
    Thanks

  • EVDRE encountered an error retriving data from web server in PROD

    Hi friends,
    We are checking Evdre reports in BPC production system. We checked few application' EVdre input templates & reports and are fine.
    But yesterday evening onwards we are facing below error message.
    EVDRE encountered an error retriving data from web server. This message we are getting  for all BPC applications in BPC production.  There is no short dump in backend.
    But when i checked in BPC developement there is no probelm.
    We are on BPC7.5 NWsp04 and BI7.01.
    In BPC, production,when i try to create evdre template(just after filling
    information in evdre builder), immediately getting same error information.
    I read few notes, did as per that but sill problem exists. In note, mentioned process dim of particular application and process application. Logout from bpc admin & excel. I did this and, that error message not received for upto 20min. After that i'm getting error. We checked communciation between ABAP layer and bpc, reset IIS also. Still same probelm exists.
    Any suggestions pls.
    thanks,
    naresh

    Hi frineds,
    SAP OSS team resolved along with our basis guy.
    Initially SAP supported notes:
    1.1475233 and 1378705 Process all dimensions and applications.
    2.1355954 Drop SAP temp tables.
    3.1428764 confilict only if you use Oracle 10 g, if you don't, then forget it.
    I used 1378705 and problem resolved temporarly, but still exists after 1 day.
    There are different reasons for getting the error message. In our case, problem is at backend BW and, BW system running on HP unix OS.
    Checked librfc32.dll in the
    directory /usr/sap/BP1/DVEBMGS00/exe.
    Executed the following MDX statment in MDXTEST transcaction, and it
    executed in both the available instances.
    SELECT
    {[Measures].MEMBERS} ON COLUMNS,
    [0MATERIAL].[LEVEL00].MEMBERS ON ROWS
    FROM [$ZCO_CDPC].
    Even i also don't have clue how SAP resolved this issue.
    Regards,
    Naresh

  • Can we get data from business views  in CR 2008/XI?

    Hi All,
    Can we get data from business views  in CR 2008/XI?
    If its possible, pls let us know how to get connect with Business View in both of these versions and what is the tool that we have to use to create Business Views.
    Thank you,
    Krishna Pingali

    Hi Krishna,
    Crystal Reports/BusinessObjects Enterprise ( BOE ) Business Views can only be created using the BV build which comes with BOE and installed using the Work Station installer for BOE. for both XI and 2008.
    You cannot mix these two versions on the same PC not can one talk to the other, the BV designer must match the same version as BOE. XI ( version 11.0 ) is no longer available but if you mean XI R2 ( version 11.5 ) then it still is.
    It's not completely clear which Business View you are referring to? BOE has a Business View Designer so not sure if this is just a naming problem or not? If you are referring to the BOE Business View Designer then the above is true. If your reference is about some other BV designer or data source then you need to clarify.
    Contact our Sales department for pricing and availability.
    Thank you
    Don

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

  • I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

    I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

    I just figured it out. All I had to do was close out of iTunes then restart.

  • Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

    Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.  How can I fix this?
    Thanks
    [email protected]

    What is your operating system?  Reader version?

  • I need help! when I am importing my NEF files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support"

    I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you

    Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
    Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
    Thank you @dj_paige

Maybe you are looking for