Error message for double entry of a phone type.

Hi. From "Phone Number" form i am trying to add for second time the phone type "Home" and i get an Error Message "APP-PAY-51530: Only one active phone number is allowed. Action: Delete existing home phone, or use secondary home phone type."
This message is correct. I want to add the same message also for phone type "Mobile" because now the application allows to add it more than one time.
Does anybody knows how can i add a new error massage?

Hi Rachel,
You can make use of the exit (Include) MV45AFZZ. The corresponding form routine is FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
In this exit, For the given billing document ( which is going to be cancelled ), pick up the accouting document from BSEG tables.
For this accouting document, Pass this to BSAD Table ( Customer clleared items)
If BSEG-BELNR = BSAD-BELNR and
BSEG-Acc.Year = BSAD-Acc,year )..
Then throw a error message and EXIT.
So for all the cleared docments , user can not cancel the invoices.
Regards,
Sai

Similar Messages

OBA5 : Error Message for duplicate entry

Hi
In Tcode OBA5 - i enter F5 as Apllication area and i select new entries - i Enter 117 - and i Enter E before i save.
but when i go to MIRO to check if there is an error message for duplicate entry, i find just a Warning Message !
Please did i forget any thing ? please advise.
Thank You,

Hello,
OBA5 should be enough, but you must remenber that the following fields must be identical for duplicate invoice check:
     Company code                           (BUKRS)
     Vendor number                           (LIFNR)
     Currency                                    (WAERS)
     Reference number                       (XBLNR)
     Amount in document currency      (WRBTR)
     Document date                           (BLDAT)
Note 305201 is also helpful.
Cheers

How to create a popup of error message for multiple entries

hi
i am trying to create a pop-up message window where more than one error is stored like MIGO transaction when we click on post .
thanks
Oni

Please check the belw programs
SBAL_DEMO_04_POPUP
BCALV_GRID_AND_POPUP
BCALV_TEST_GRID_ONPOPUP
BALV_POPUP_TO_SELECT
Hope this helps.
Regards,
Bhargav.

I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Error message for Confirmation

Hi,
We have a error message for back end service entry creation in the Application monitor for Confirmations.
There is no outbound or Inbound Idoc found with error.
From this error message how can we found the PO Number or Confirmation number to check whether the confirmation is posted or not?
Thannks
Jimmi

Hi,
If you are doing confirmation in SRM , it is Extended classic scenario.
error : There is no outbound or Inbound Idoc found with error
You have not created the IDoc for the outbound Idoc for the confirmation to take to the backend.
Create the Message type and partner profile in WE20
Create Distribution model in SRM -T.code :BD 64
we found the PO Number or Confirmation number to check whether the confirmation is posted or not
Soln: Check in confirmation in display/process confirmation in SRM enter the timeframe
(or) check in R/3 in ME23N by putting the Purchase order no and check the goods receipt
Regards
Ganesh Kumar.G.

When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?

Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

Any answers how to fix it? All Im getting is error for the past 3 days!

I downloaded the latest version of itunes. Now I cannot open iTunes. I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll. Thoughts?

I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

I just tried updating to iTunes 10.7 on my pc and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Any Ideas?

I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Recently tried to update iTunes 12.0.1 and got this error message: The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.

I recently tried to update iTunes to 12.0.1 and got this error message:
The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
After that, I get: iTunes did not install properly. Reinstall iTunes.
I tried downloading iTunes again (without uninstalling it) and it won't download.
Any suggestions?

Thanks so very much, I have been looking for an answer to this for
almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
I must have installed deleted everything in order at least 15 times
Is there anyways this cane get pinned to stay at top as it works and save people ploughing
through post after post which is just asking the same question.
Off to back up and I Cloud back up and see how it works without sidebar
again thank you

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Error message-- The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library C:\Program Files (x86)\iTunes\iTunes.dll

Error message-- The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library C:\Program Files (x86)\iTunes\iTunes.dll

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Error message for double entry of a phone type.

Similar Messages

Maybe you are looking for