Error message in Emulator X install

I just installed a new 1212m and Emulator X setup on a brand new install of Win XP SP2. The drivers for the card and install went fine Patchmix but when installed the Emulator X software i got the messge:
"EMUDSPDetect.exe has encoutnered an error and needs to close".
From what I can tell, the install actually went fine - asiode from the mssage the install told me that it had completed succesfully and Emu X seems to be running with no problem (I'm still getting my head around the software so I can't be certain as I haven't really put it through its paces yet).
Can anyone suggest what this error message meant ? Was I right to just ignore it ??

Please repost in the Designer forum. This can only be fixed via Designer.

Similar Messages

Error Messages when trying to install, uninstall or run iTunes 9

I get the following error message when trying to Install iTunes:
The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
I search my entire computer for the file but it's not there.
Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
"The feature you are trying to use is on a network resource that is unavailable"
Catch-22, I can't install or uninstall and when I try to run iTunes I get:
"The action is only valid for products that are installed"
Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.

wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
ok here is what you need to do:
go to the link below and download the Microsoft Windows Installer CleanUp Facility.
http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
Hope it works for you mate!

I receive an error message when trying to install Adobe Acrobat 6.0 on my new PC that has windows 8.1

I receive an error message when trying to install Adobe Acrobat 6.0 on my new PC that has windows 8.1.
Can someone help me?
thanks!

And that message is exactly? I hope you are aware that you are trying to install software from the stoneage and it may simply no longer be compatible...
Mylenium

Error message when trying to install Flash 10.0.45.2

I am running IE 7 on windows XP. We had some issues with Flash active active control version 10.1.53.64 and higher so I unistalled 10.1.53.64 and downloaded the older version (10.0.45.2) from the adobe website but when I try to install it I get the following error "The version of Adobe Flash Player that are trying to install is not the most current version. Please visit http://www.adobe.com/go/getflashplayer to obtain the latest more secure version". I am however able to install version 9.0.289.0
Is there any particular reason that i cannot install 10.0.
The reason that I don't want to use 10.1 is because it has a bug that affects the working of my application and the audio some times does not play.
Thanks

Thanks for the information. I downloaded the Active X from the link you provided but I am still getting the same error message
Date: Wed, 15 Dec 2010 17:01:23 -0700
From: [email protected]
To: [email protected]
Subject: Error message when trying to install Flash 10.0.45.2
If I remember correctly, there were two different installers for 10.0.45.2: one that did the checking for a newer version, and one that did not.
The forum search is currently disabled, and I cannot find the topics that were discussed at the time.
However, I still have the installers for the non-check version available for download on my servers:
http://www2.gol.com/users/pbw/filelib/install_flash_player_ax.exe (ActiveX)
http://www2.gol.com/users/pbw/filelib/install_flash_player.exe (plugin)
>

Error messages when trying to install Essbase 11.1.1.3 on Red Hat Linux 5.3

Hello,
I'm having an error message while trying to install EPM 11.1.1.3 on Red Hat Linux 5.3 (32-bit).
It happens when I click "Next" for the installation to begin:
Error: Linux File Service Initialization Failed. Turn on the System property 'EnableLinuxPPKLogger' for more stack trace details
Error: Linux System Util Service Initialization Failed. Turn on the System property 'EnableLinuxPPKLogger' for more stack trace details
Exception in thread "Thread-7" java.lang.NullPointerException
at com.ibm.wizard.platform.linux.utils.UnixShellInterface.shutDown(Unknown Source)
at com.ibm.wizard.platform.linux.LinuxFileServiceImpl.cleanup(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.close(Unknown Source)
at com.installshield.wizard.service.ServiceFactory.shutdownService(Unknown Source)
at com.installshield.wizard.service.LocalWizardServices.shutdown(Unknown Source)
at com.installshield.wizard.service.LocalWizardServicesManager.shutdown(Unknown Source)
at com.installshield.wizard.service.LocalWizardServices.shutdown(Unknown Source)
at com.installshield.wizard.Wizard.shutdownServices(Wizard.java:648)
at com.installshield.wizard.Wizard.exit(Wizard.java:583)
at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1848)
Many thanks for your help.
Best regards,
Andy

Hi John,
I get the error messages once I click on "Next" from the "Confirmation" window.
I've extracted:
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:19 commonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 essbaseAddins
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:20 essbase_administration_services_webapp
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:19 essbase_integration_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:16 essbaseProductCommonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:21 essbase_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:17 essbase_smartsearch_webapp
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:17 essbase_studio_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 productCommonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 tools
For the Essbase installation.
Thanks for your help.
Best regards,
Andy

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

Error Message "No plugins are installed"

Hi
I have download Oracle Migration Workbench 10.1.0.4 and unzipped
I need to migrate from DB2 8.2 to Oracle 9i
When i am trying to create database repository getting error message "No plugins are installed, please install the plugin for the database you are trying to migrate." and creating respository.
I have followed the steps as per Oracle Migration Workbench guide.
I have also copied the db2java.zip file D:\omwb\plugins direcotry
When getting the log file the error is as follows
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Omwb
** user language: en
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows XP
** o.s. version: 5.1
** Classpath:
..\lib\boot.jar
** Started : Sun Jun 22 00:14:56 IST 2008
EXCEPTION: _isValidPlugin(): oracle.mtg.migration.MigrationInitException: java.lang.ClassNotFoundException: oracle.mtg.db2java.db2java:java.lang.ClassNotFoundException: oracle.mtg.db2java.db2java
Some one please help. I need to compelete the test task by monday.

OMWB consists of 2 parts, the common files and a plugin. The message you get commonly means you didn't download a plugin.
Under certain circumstances the Internet Explorer is sometimes saving JAR files with the ZIP extension and thus OMWB can't handle it as well.
But anyway, you try to migrate a DB2 database V8 to Oracle using OMWB. There is no plugin available to use OMWB with Db2 V8.
So you need to choose a different method like a gateway or flat files and SQL*Loader to move the data to Oracle.

CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing.

CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing. This is a brand new machine. This is one of the first things I'm installing on it. I'm running Windows 7 Home Premium 64-bit. The disks are fine. I have the programs installed on my two XP machines. When I run the disk, I get the window pop up that says "Initializing Installation for Adobe Creative Suite 3". Then the disk stops spinning and nothing else happens. No error message. Nothing else happens. I'm baffled. I have searched several discussion boards and cannot find anybody that has had a similar install issue like this.

Old_Timer I would recommend reviewing your install logs to determine the exact error message. You can find details on how to locate and interpret the logs at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

Does anybody know if you uninstall iTunes (mine is giving me an error message) and then re-install, will my music still be there (somewhere?) I don't have it saved to the cloud, but it is on my iPad.

Does anybody know if you uninstall iTunes (mine is giving me an error message) and then re-install, will my music still be there (somewhere?) I don't have it saved to the cloud, but it is on my iPad I recently upgraded my iTunes account and now I can't open it. I get an error message and it says I need to re-install.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT5934 I keep getting an error message when trying to instal is7 in my iPad 2 . Can anyone pls help . I lost wifi for a white during the installation ...

Hello
Can anyone assist me with installing ios7 on my ipad2 please ?

laleh08 wrote:
Hello
Error message is "unable to install update " "an error occurred during installing IOS7 "'
Can you assst ?
Ooof... I hate those super-generic messages. If I were in your shoes, I'd start all over again with a new download. My WAG is that your first download was corrupted.

I get the following error message when trying to instal in copy: "Creative Cloud Installer" can't be opened because the identity of the developer cannot be confirmed.

I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

I get an error message when trying to install software update 4.2.8 "problem downloading, network connection timed out. Check network connections.

I get an error message when trying to install software update 4.2.8
"problem downloading, network connection timed out. Check network connections."
Anyone one else had this problem?

Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799

Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE.

Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE. Recently upgraded to windows 8.1 then everything just wouldn't work properly

Could you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?

Error message in Emulator X install

Similar Messages

Maybe you are looking for