"Overprint" object not displaying

A one color log, spot color Illustrator file was accidently set to "overprint." When placed in InDesign, on top of a grayscale Photoshop texture, it never show up as an overprint. It never showed up in any prints or PDFs. It wasn't until the printer delivered a proof that the logo showed up as transparent, overprinting the grayscale image.
Should it have appeared in an earlier PDF? My own prints were done on an office inkjet, so I kinda understand why it didn't show up there.

That's what overprint preview is for.
With Reader 9 it would have shown up but in Acrobat you'd need to enable
auto overprint preview for all files.
Bob

Similar Messages

Flash objects not displaying in Firefox (but works fine in Chrome and IE)

Well, I'm trying to embed a Shockwave Flash object into a website I'm building. It displays in Chrome and IE, but it doesn't show up at all in Firefox. It's just white space. Ive tried it on two machines, so it's presumably the code. Both the machines have Adobe Flash enabled... I'm not sure what the problem is. I've not worked with embedding Flash objects in HTML before, so, it's probably something really obvious. I just used the insert command on dreamweaver and it wrote the code that I'm using. If anyone can help me, it would be much appreciated. Here's my code:
<pre><nowiki><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="99%" height="600" id="FlashID">
<param name="movie" value="The file path" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="10.1.0.0" />

<param name="expressinstall" value="../Scripts/expressInstall.swf" />


<object type="application/x-shockwave-flash" data="the file path" width="99%" height="76.5%">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="10.1.0.0" />
<param name="expressinstall" value="../Scripts/expressInstall.swf" />

<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>

</object>
</nowiki></pre>

If you can't post an address for a page demonstrating the problem, could you check the Web Console (Ctrl+Shift+k) and Browser Console (Ctrl+Shift+j) for any messages related to the Flash media? For example, does either console show that Firefox is requesting the SWF file? Does either show an error in content type or any kind of security message?

Action script objects not displayed

Hi,
I am creating an air application using Flex 4.5 compiler. The problem i am facing currently is that i have extended shape class to my custom class movingObject. in this class i have defined a function "drawcircleObj" in this class and calling this class function to display my customized circle on the stage.
But it is not behaving as desired. i.e. no object is being displayed

Adding my code snippets
The as file code
package secondPackage
    import flash.display.*;
    public class movingObject extends Shape
        private var xPos:Number;
        private var yPos:Number;
        private var radius:Number;
        private var color:uint;
        public function movingObject()
        {// currently a stub will use it later
        public function drawcircleObj(xInput:Number,
                                      yInput:Number,
                                      radInput:Number,
                                      colorInput:uint): void
            xPos = xInput;
            yPos = yInput;
            radius = radInput;
            color = colorInput ;
            this.graphics.beginFill(color);
            this.graphics.drawCircle(xPos,yPos,radius);
The mxml file code
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/mx"
                       creationComplete="initApp()">
    <fx:Script>
        <![CDATA[
            import secondPackage.movingObject;
            import flash.display.*;
            private var myMoving:movingObject = new movingObject();
            public function initApp():void
                //show the string
                myMoving.drawcircleObj(500,500,30,0xFF0000);
                mainText.text = myMoving.letsStart();
        ]]>
    </fx:Script>
    <s:TextArea id="mainText" x="390" width="50" y="133"/>
    <s:Button id="button1" x="804" y="227" label="Button" width="45"/>
</s:WindowedApplication>
The problem which i suspect is that there should be a stage object holding the same object or circle created and then display it.
A faster reply will be highly appreciated. Thank you.

Objects not displayed in Org Structure (PPOME)

We made big changes in the existing organizational structure (new objects) with start date 01.01.2012.
Old objects were terminated by 31. Dec 2011.
In PPOME with entry date = 01. December 2011 I can only see the new objects but not the old and still valid ones.
In table HRP 1000 and HRP 1001 all relationships are correctly maintained - but I don't see any of the objects in PPOME.
Big problem, as workflows don't work any longer.
Thanks!

I have the same problem, I have updated relations of some positions. HRP1001 looks correct, with limitations on correct dates.
But on PPOME I can see the same position under two organizations, both with end date 31.12.9999.
This is an impossible case, when standart PPOME controls are concerned, but something happened, and I could not find how to correct it.
If you have any suggestions, please share.
Thanks.

Java Label object not displaying ascii chars (128-159)

I am having a problem getting ASCII characters between 128 and 159 to show up in a Label object which is inside a Panel which is in turn inside a Frame. There is other code in a different class that uses a Graphics object and drawString and Paint methods to display the same text, and that works. However, simply passing the text containing the above mentioned ascii characters like so:
lb = new Label("€‚ƒ„…†‡");
results in mostly empty boxes being displayed (there is other code that eventually displays the label in the Frame). The Euro sign comes through, as does the integral sign. Some others come through, and they are mostly modifed letters of some sort.
I've tried coding a mock up simple Frame with a few labels. I've passed in literal strings, String objects derived from hex and integer byte arrays and a String object with the Cp1252 encoding passed in. None display the characters in question. However, in the same code, I pass a title string containing these characters into the Frame's constructor, and it appears with no problems.
I just want to be able to handle all characters that may be entered into this application, and that may include these Cp1252 characters. Is there any way of using Label objects and getting these characters to display correctly?
[Windows-1252 Chart|http://upload.wikimedia.org/wikipedia/commons/e/e7/Windows-1252.svg]

I am having a problem getting ASCII characters between 128 and 159 to show up in a Label object which is inside a Panel which is in turn inside a Frame. There is other code in a different class that uses a Graphics object and drawString and Paint methods to display the same text, and that works. However, simply passing the text containing the above mentioned ascii characters like so:
lb = new Label("€‚ƒ„…†‡");
results in mostly empty boxes being displayed (there is other code that eventually displays the label in the Frame). The Euro sign comes through, as does the integral sign. Some others come through, and they are mostly modifed letters of some sort.
I've tried coding a mock up simple Frame with a few labels. I've passed in literal strings, String objects derived from hex and integer byte arrays and a String object with the Cp1252 encoding passed in. None display the characters in question. However, in the same code, I pass a title string containing these characters into the Frame's constructor, and it appears with no problems.
I just want to be able to handle all characters that may be entered into this application, and that may include these Cp1252 characters. Is there any way of using Label objects and getting these characters to display correctly?
[Windows-1252 Chart|http://upload.wikimedia.org/wikipedia/commons/e/e7/Windows-1252.svg]

Database objects not displaying in Business components wizard

I am trying to create new entity object based on a table using Entity Object Wizard. But I dont see that the tables,views,sysnonyms enabled and also do not get the list of tables in the dropdown
Following are the steps that I am following :
1] in the navigator, have right-clicked and selected the "New Entity Object " Wizard Option.
2] Entered the name and the package and in the schema object lov, do not see the list of all the tables at all and also the Database Schema is disabled.
I have connected to the database from JDeveloper using database connections, but do not while creating an Entity object. Can you pls help me resolve this.
Version of Jdeveloper is 11.5.10(CU3)

Select your project in Jdev, right click and select "Edit business components project". In the new window check the value used for connection.
--Shiv

Transparent objects not displaying correctly

Interactive pdfs which were created in indesign and functioned perfectly in Acrobat XI and Acrobat reader    are failing to display correctly in Acrobat DC Specifically Drop shadows and transparent items display as heavily pixelated mess any thoughts

I have just downloaded Acrobat Reader DC and the display issues are the same
This is very worrying I have produce numerous interactive pdfs over the past few years    many have   show and hide areas displaying text on semi transparent background overlaying a image    and button which glow on rollover etc   it appear that anyone viewing the projects in a Adobe DC will basically get garbage
I find it unbelievable that adobe would a releases a version of a programme which effectively   totally undermines a production process from indesign i.e. interactive pdfs
but even worse to introduce it with out waring so effectively content creators    will just have to deal with the fall out of suddenly having a back catalogue of work   which no longer functions   let a lone having to deal with clients which will be infuriated to learn their assets have been rendered useless.
How incompetent does this make   designers look in this area
Hopefully there is a fix in the offing

Dynamic OLE object not displaying proper file

We are using CR IX R2. I have a report that I would like to attach a pdf to. This pdf will be different depending on the selection of data from the rest of the report. The file location is always the same but again the name of the file will vary.
The location and name of the file are listed in one field of a table. Is there a way to do this. When I edit the OLE object and select the field where the file resides it only shows the original document that I choose.
At this point I am testing it in a blank report before I create the subreport to add it to our existing report.
Any suggestions?

What happens if you try this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0fbebaf-07e0-2c10-ad9a-d45810ae7109&overridelayout=true
It should open the PDF Browser viewer. If it doesn't then you likely need to add PDF support to your browser. Or configure PDF or install the latest version. Could be a permission issue also.
Thank you
Don

Excelsius flash object not displaying in DHTML viewer

We are using Crystal 2008 and ASP.NET 2.0.
When executing a Crystal report containing an Excelsius object and viewing it in the DHTML viewer, nothing comes up. This is going through a web page and ASP.NET.
There is a blank spot where the flash file should go but nothing else. It works when running it in Crystal reports. Right-clicking on the space shows the Adobe flash properties but nothing else.
Are there any special considerations we need to take into account when viewing an Excelsius object in the DHTML viewer on the web?

I've just tried it and it works fine. I am using CR 2008, SP 1 and .NET 2008.
SP 1 is here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
Ludek

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

My anchored objects dont display after CS5 upgrade - help?

Hi,
We've just upgraded to CS5 from CS3.
I publish educational books, which contain a lot of object styles and anchored objects.
I have just opend a book im working on in CS5 and have had problems with both anchored objects not displaying and object styles changing. The first is more pressing.
The problem arises where I have an anchored object inside another anchored object, and they use custom positioning.
For example. I have a pullout box that contains text and an image. The image is anchored inside the pullout box and the pullout box is anchored to the main body of text.
The images are no longer displaying. I can select their frames, and if i change the image positioning to inline the images display fine, but when it is set to custom (which they need to be) I can no longer see the image.
Is anyone able to help with this, its a major problem as i am woking with hundreds of images here.
Thanks

My usual advice is that with a project this large, it's best to finish it in the same version it was started in. Even a small change in the text engine can effect things like this and there were changes from CS3 to CS4 and again to CS5, but I'm not really sure what's happening in your case.
Bob

Color gradients not displaying correctly

I'm having an issue with my color gradients in type and objects not displaying correctly in the content viewer. For the last app I created, I made sure the colors were RGB and that seemed to fix it. With the current app I'm working on, that dosen't seem to fix the issue. Actually, when I test in the viewer on my iPad, it shows the correct gradient in the split second that it's loading the update but then once it's loaded, it goes to a gray white gradient (the correct gradient is from a yellow to a gray; attached a pict for referrence).
Anyone know why this is happening? Thanks in advance!
UPDATE: It seems to view fine if I preview the page via the foilo overlay but when I preview the folio, that's when it's no viewing correctly.

The Color Picker is unreliable for choosing colors based on what you see because it is not color managed while Color panel and Swatches are.
In your image, the color that you see in the Color Picker is how your monitor displays R=0 G=255 B=0. The color that you see in the Color Panel represents the same values in the file but the color management sends different values to the video card and thus to the monitor to display a color with appearance in the color space selected for the document. In your image this is a CMYK color space which you can check from the Show popup menu at the bottom left of the document window. To check the different values the video card is using, make a screen capture, save the image, open it in Illustrator and measure the color with the eyedropper. The color translation from the values in the file to the video card allows simulation of color spaces other than your monitor's. This simulation is accurate if you have a monitor profile installed in your system that correctly describes how your monitor displays colors. Such profile is created by using a color measuring device and profiling software. If your monitor profile (color space) installed in the system is the same as the color space of the document then there will be no translation (simulation) which in effects shuts down the color management - then the colors in the Color Picker will be the same as in the document. Many people do not bother to get an accurate profile of their monitor and use a generic sRGB profile for that. In such case working in RGB color mode using the sRGB color space (default in the Color Settings) will give the same colors in the Color Picker and the document. This usually is a sign of using a monitor that incorrectly displays colors.

Flash Player 11.2.202.235, IE9 64-bit, Windows 7 64-bit, HP laptop - objects do not display-seevideo

Flash Player 11.2.202.235, Internet Explorer 9 64-bit, Windows 7 64-bit, HP laptop - Flash objects do not display properly in browser; right-click Settings window does not display properly either; i have to scroll down and back up to see parts of the Flash object but it disappears anyway when i mouse over.
I took video of the issue and have now linked to it. In the video, I show two browser tabs - one from this site and one from a Bank of America (BoA) site with a flash object. You can see how the BoA flash object disappears when I make that tab active.
Please help!
Link to video:
http://www.youtube.com/watch?v=PCLJcxmzPkI&feature=youtu.be
Message was edited by: Jleon21612012

Thanks for the reply and the link. The driver update did not work because it says I have the latest one installed - even though the driver date is 10/8/2009. It's the Intel(R) Graphics Media Accelerator HD, version 8.15.10.1968.
Can you believe that...the latest is from 2009?! I tried to install an updated version anyway - first by going to the Intel site. I found a driver update from Jan 2012 that matches my system, but the install aborts with the error message "A customized computer manufacturer driver is installed on your computer. The Intel Driver Update Utility is not able to update the driver."
So, I searched through the HP support site and finally found a link to my computer:
http://h10025.www1.hp.com/ewfrf/wc/product?product=4121236&lc=en&cc=us&dlc=en&task=&lang=e n&cc=us
And I downloaded and installed the "same" driver anyway:
Intel Graphics Media Accelerator HD Driver ►
2009-12-04 , Version:8.15.10.1968 B, 29.91M
This package contains the driver for the Intel Graphics Media Accelerator HD in the supported notebook/laptop models.
But it does not correct the problem.
Maybe this problem is because of an old graphics driver - but this is apparently a dead end for me.
Is there any possibility it is caused by something else?

Objects not visible in Map Viewer Display Data with Mouse Moveover

Hi All,
On version 11.1.1.5.2 OBIEE with Map Viewer a customer has the following problem. Data objects are not displayed as expected on the map when the visibility check box is disabled on a dashboard. However the data about the object is incorrectly displayed on the map when the mouse is placed over the location of the hidden object.
The customer's screen shots show a map with a panel which has a list of assets with a check box controlling if the asset is displayed. When the check box is off then the asset image is correctly not displayed but when the mouse is placed over the hidden asset’s location then incorrectly a pop window shows the hidden asset's Tooltip data.
I was unable to reproduce this in-house with an OBIEE dashboard connected to Google Maps.
In the MapViewer User Guide there is a reference to a MapViewer JavaBean method “setSVGShowInfo” which appears to be related to this:
http://docs.oracle.com/cd/E14571_01/web.1111/e10145/vis_beanapi.htm#i1023460
What approach should be taken to troubleshoot the problem?
Aidan
Edited by: user817045 on 21-Feb-2013 02:08
Edited by: user817045 on 21-Feb-2013 02:32

This is likely a bug.
Is there an SR filed on this?
Anyway, the Mapviewer javascript API is being used in OBIEE (not the java bean one).
Is it a standard obiee map view which has this issue?
Try the OBIEE Sample App (available on OTN)
Try Dashboard page 3.3. SF Metrics. There are two layers that can be shown on the map (Revenue and Billed Quantity, and Establishment Revenue).
Enable both and on hover the Rev & Billed qty info is shown. Uncheck Rev & Billed Qty and only the info for Establishment Revenue is shown on hover or when clicked on.

Print Preview in Safari for Windows does not display Flash object

I have a web page with images, text and a flash movie in several divs. I can see all the objects on the page but when I print preview the flash object is not displayed. The same problem occurs in Firefox 3 but not in IE6/7 or Opera9.5
Any clues/help would be greatly appreciated.

Click Help -> Report Bugs to Apple.
I'm hoping they fix it.

"Overprint" object not displaying

Similar Messages

Maybe you are looking for