Error message in program

Hi,
I trying to modify some existing program and in the program I have some lines of code like this..
Read the program code from the textpool.
castProgramName = programName.
read report castProgramName into iIncludeLines.
append INCLUDE to iKeywords.
scan abap-source iIncludeLines tokens into iTokens
with includes statements into iStatements keywords from iKeywords.
clear iIncludeLines[].
I am getting error message for the above code lines like this..
(message is displaying in German language-I converte this message..(Der Zusatz WITH INCLUDES benötigt im Zusammenspiel mit Erweiterungen mindestens einen der Zusätze FRAME PROGRAM FROM oder INCLUDE PROGRAM.))
Error message..
The additive WITH of INCLUDES needs at least one of the additives FRAME PROGRAM FROM or INCLUDE PROGRAM in interaction with extensions.
Can any one please let me know what is the error.
Thanks in advance.

hi Kavitha,
This is just a warning message not a error message. this warning will not affect your program in any way.
In order to avoid the warning message change the code like below..
scan abap-source iIncludeLines tokens into iTokens
with includes
statements into iStatements
keywords from iKeywords
frame program from <program name>.
hope it solves your query.
regards,
Navneeth.K

Similar Messages

Error message c:\program files (x86)\itunes\ituneshelper.exe r6034

can not log into itunes, get the following error message: c:\program files (x86)\itunes\itunes help.exe
R6034
I have uninstalled and reinstalled and still unable to login

Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2

HT1349 I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times.

I am unable to install iTunes. I'm receiving an error message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've unistalled and attempted to reinstall several times. I keep getting the error message to reinstall to fix the problem.

See if this post from turingtest2 fixes it : https://discussions.apple.com/message/24620553#24620553

Can't download itunes update. Keep getting this error message: THe program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem

Can't download itunes update. Keep getting this error message: THe program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem

I researched the advice on the link provided by b noir as well as very similar advice from apple support: http://support.apple.com/kb/TS5376. It worked for me (for now).
Some things of note:
I did all of the things requested by the link I provided
My computer WOULD NOT uninstall Apple Mobile Device Support. I had to manually remove the folder (also as instructed by the url)
I also uninstalled MobileMe. Was a little different than removing the other apps. Follow instructs provided here: http://support.apple.com/kb/HT2992
I did not uninstall iCloud
I have to admit it was a bit scary removing all those things. Is important to note that when re-installing Apple, follow steps to do so as Administrator (the right-click thingy and whatnot).
Hope this helps!

Error Message: "The program can't start because QTCF.dll is missing....."

Full error message: "The program can't start because QTCF.dll is missing from your computer. Try reinstalling the program to fix this problem." I can't start iTunes because of this error. Any advice on what to do?

I have discovered the reason this occurs. It is because the PATH in the environment settings no longer has the path to C:\Program Files (x86)\QuickTime\QTSystem which is where the .dll lives on a Windows 7 computer. Close the application giving you this warning if it is still open and use the following 10-step process to fix this:
1. Search for the path to the QTCF.dll and upon finding it, copy it (Highlight it in the explorer address bar and press CTRL + C.)
2. Open the control panel.
3. Choose System and Security from the left.
4. Choose Advanced system settings from the left and a dialog window pops up with the Advanced tab selected.
5. Click the Environmental Variables... button near the bottom of the dialog box.
(This opens a dialog box with 2 sections: User variables and System variables.)
6. Scroll down through the System variables section so that you can select (highlight) the Path variable in the left column.
7. Click the Edit... button which opens a small dialog box and highlights the entire Variable value.
8. Click once in the Variable value (to deselect the value so you don't mess it up) and then press the end key on your keyboard (to move your cursor to the last character of the very very long string in the text box).
9. Paste (keyboard combination CTRL + V) the path to the QTCF.dll you copied earlier, and add a semi-colon, for example:
C:\Program Files (x86)\QuickTime\QTSystem;
(Note that you don't need a trailing / or the actual .dll name in the path, but be sure to add a semicolon to the end of the path name you paste.)
10. Click OK on each of the 3 open dialog boxes.
There is no need to reboot your computer. You only need to restart the application and ensure that it starts without the warning that the .dll can not be found.

While trying to download iTunes to a Windows 7 PC I got the following error message: a program reqjuired for this install to complete could not be run. Any suggestions.

While trying to download the 64 bit version of iTunes for a Windows 7 PC, I got the following error message: A program required for this install to complete could not be run. Any suggestions?

I would try removing and reinstall the Apple software using:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I was updating ITunes and got error message that program cannot start because MSVCR80.dll is missing

I was updating ITunes and I got an error message that program can't start because MSVCR80.dll is missing. what do I do?

I have the same problem and in following the Apple recommended procedures of unistalling Apple iTumes and related programs I am not able to unistall"Apple Mobile Device Support" as recommended. It is recommended that I delete all related files before installation! How do I proceed?

Error message or program crashing when printing on Epson printer

In July 2008, I upgraded my computer from a MacBook to a MacBook Pro (and bought a Time Machine so that all my files are backed up regularly!) I then bought my wife a MacBook Pro in November 2008. We both used to have iBook G4s.
We have an Epson EPL-6200 Laser Printer that we print from using our Airport Express. It used to work fine printing documents from any program and printing wirelessly from the iBook G4 computers we had when we bought the printer around three years ago.
But since I have switched to a MacBook and now a MacBook Pro, I have all kinds of problems printing on the Epson EPL-6200 printer. At first, my MacBook did not print remotely at all. I had long conversations with both Apple and Epson, knowing there was a problem with the Epson driver. To top it off, the problems seemed worst with Microsoft Office, so both of them also said it was Microsoft's fault!
Now that Epson has upgraded its drivers and I have dowloaded the latest one, and switched to a MacBook Pro, I can print some files easily -- Word documents now print immediately, although I get an error message saying that the printer is not connected. But trying to print from other programs such as Firefox either takes a very long time (around 5-8 minutes for one page) or causes the program to crash.
Any ideas? The strange thing is that my wife's computer and mine are exactly the same (running Mac OS X version 10.5.6) but behave slightly differently when printing. I can print from Firefox, albeit after a long time per page, whereas if she tries to print from her computer in that program it instantly crashes.
I guess we still have driver issues with the Epson EPL-6200.
But I have looked on the Apple support forums and there seem to be a lot of printer-related issues like this. Do you guys have any suggestions? Or is there a printer that will work well with our MacBook Pros, an Airport Express and/or Time Machine (we have both) and when printing remotely?
All the best,
Alex

hey,
well, i use the below machines with the current mac os (10.5.6).
i (kind of often) had issues with the network printer epson epl-6200.
of which every issue could be resolved by myself, more or less quickly.
i.e. until the last update (10.5.6).
none of my machines is able to get anything through the network to the printer.
at least they don't get the printer to print a page.
today i spent (almost) the whole day, trying out things to get it fixed this time.
none of it worked.
just to let you know:
i can access the printer through its http-interface.
i can ping it.
it gets recognized by the printer/fax-dialog in the system-preferences.
here's what i tried so far:
i tried to install the osx driver for the epl-6200 with every single protocol that's available in osx (i.e.: Appletalk, IPP, Bonjour, EPSON (IP), etc.)
i of course tried to update the driver with the latest software available on the epson-website. and did the thing with the different protocols again.
i tried the "generic" postscript driver of osx, too.
then it was getting interesting:
i tried to get "cups" for the epl-6200. i don't want to get into details here, but to drop some names:
foomatic-rip (combined with ghostscript)
http://linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
gutenprint (doesn't have an epl-6200 driver included)
pxlmono (doesn't have an epl-6200 driver included)
to sum that up:
there are two drivers on the "openprinting"-site (foomatic). but one is (of course) the official epson driver.
but:
there is a "third-party" driver downloadable on that website.
http://openprinting.org/show_printer.cgi?recnum=Epson-EPL-6200
well, i downloaded it, installed the required additional software (foomatic + ghostscript), all very fine. i could choose it in the osx printer setup menu.
but:
my printer still won't print a single page.
the error messages i got:
other than the above post none of my programs ever crashed, or was "dead slow".
but:
the printing job got constantly stopped, i could restart it, but it was then stopped again. without any error message.
there was the same thing with the halt of the printer (also monitored in the printing cue window). i could restart it, but it would stop again. without any error message.
but i also got two decent error messages: :))
the first involved the pdftoescpage.app, either it was failing (shown in the printer cue window), or it was crashing (i got the error message in a separate window popping up). according to folks on the net this malfunction involved user permissions, so i to set up the "right" permissions (giving everybody the right to do anything (rwx) - i know i shouldn't have :)) ). but it didn't help. still crashing or failing.
the second decent error message, finally:
"double free" - what that meant, i cannot tell.
conclusion:
i don't know. :))
required action:
i will await the next osx update, and hope it'll be fixed then. :))
good night, y'all
p.s.: ahh, if anybody knows anything i didn't and should try. please drop a line. thx

Error message "This program cannot display the webpage when uploading images to Cafe Press

I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
Most likely causes:
• You are not connected to the Internet.
• The website is encountering problems.
• There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address."
I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
Server not found
Firefox can't find the server at members.cafepress.com.
* Check the address for typing errors such as
ww.example.com instead of
[url=http://www.example.com]www.example.com[/url]
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
Nancy
http://www.cafepress.com/calendarflr

Sounds like your desktop application is in fact running from
a server. CHMs were identified as a security risk by Microsoft and
are best suited to the user's PC.
Click
here for more information.

My Itunes won't open. When I click on it I get error message: The program can't start because MSVCR80.dll is missing from your computer.

The first error message is: itunes.exe-System Error: the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix the problem.
The second error message says: itunes: itunes was not installed correctly. Please reinstall itunes Error 7 (Windows error 126)
I have reinstalled several times and the same thing keeps happening. Does anyone know what to do?

Ralph, both links you've posted point to the same place!
Ah, I see the second one is meant to lead to Tony's tip: https://discussions.apple.com/docs/DOC-6571
That one applies for certain launch errors that can occur when iTunes has otherwise installed successfully. I've addressed the same issue in the first box of my tip.
What would be interesting to know is if Aswim does indeed have QTMovieWin.dll in their Program Files\iTunes folder, and if removing it allows iTunes to launch? It would seem that different error messages may be thrown up by different versions of the file on different versions of the OS. Perhaps many more people have been doing a complete rebuild than needed to.
tt2

When i click on the Firefox icon I get an error message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. What is it? and how do i fix it? in English

When i click on the icon to open Firefox an error message box appears with the following message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. It then advises me to use the Search function, but the search function says it is unavailable.
What is it? and how do I fix it? in English

See:
http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0

Field Unknown error message in program node

I'm brand new to SAP and trying to get to grips with Smartforms. This is a very basic question I'm afraid but hope someone will answer it.
I'm trying to perform the following in a program node
SELECT SINGLE * FROM MARC INTO WA_MARC
WHERE IT_VBDPA-MATNR = MARC-MATNR.
IT_VBDPA is defined in TABLES tab of Form Interface
WA_MARC is defined in Global Definitions
IT_VBDPA is defined as an input parameter on the program node
WA_MARC is defined as an output parameter.
I get 'Field IT_VBDPA-MATNR unknown' error message. What am I doing wrong?
Mike.

I did define IT_VBDPA in the input parameters section of the program node. Is that what you mean by interface of coding node?
Mike.

Error Message: External program terminated with exit code 2

Hi ALL
We are doing REORG tablespace in DB13 and i am getting below error message. Please help us to resolve the issue.
20100430 113234 DB6PM 000 Reorg_Tbspc:Command DB6CLP failed on server
20100430 103959 DB6PM 000 Reorg_Tbspc:Exitcode:Error
20100430 103959 DB6PM 000 Reorg_Tbspc:ERRORMESSAGE: An SQL error occured. Will print output of the command
20100430 103959 DB6PM 000 Reorg_Tbspc:External program terminated with exit code 2
20100430 103959 DB6PM 000 REASON=C call failed
Regards
K.Gunasekar
Edited by: KGUNASEKAR on Apr 30, 2010 6:55 AM

Exitcode 2, if returned from the OS, means "No such file or directory". Note that as of SAP kernel release 7, you usually do not have DB6CLP any more. Can you check if the executable is available in the SAP exe directory ?
If running SAÜ kernel 700 or higher, I suggest to apply a recent SP level.
Malte

Os10.5 error message 'A program run as part of the setup did not finish as expected. Contact your package vendor.''

I'm using windows xp and kept getting error message when installing the latest os10.5. 'There is a problem with this windows installer package. A program run as part of the setup did not finish as expected. Contact your support personal or package vendor.' I've tried removing itunes completely then re-install the latest version but same message popped up again. Help?

I'm using windows xp and kept getting error message when installing the latest os10.5. 'There is a problem with this windows installer package. A program run as part of the setup did not finish as expected. Contact your support personal or package vendor.' I've tried removing itunes completely then re-install the latest version but same message popped up again. Help?

Despite unistalling and reinstalling iTunes, I can't load the program. The error message "the program can't start because MSVCR80.dll is missing from your computer."

Despite trying to unistall and reinstall iTunes, I continue to get the message "the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99385)

Error message in program

Similar Messages

Maybe you are looking for