Error Message KI112 Enter a Controlling Error in IW22 and IW23

Hello Friends,
We have a set up where MO are entered on a web front end application and transferred to SAP. The problem I am experiencing with these orders are when we need to enter a WBS element in the Location tab. When this tab is selected, we receive the Enter a Controlling Area, closing the message pop-up closes the session and brings the users back to the main SAP screen. We do not have this issue with SAP generated MO's.
The work around we have found is to delete the functional location and equipment save the notification and paste the details back into the notification, then go to the Location tab and enter the WBS element for the MO.
We are already beyond the notes that I have found that addressed a similar issue and were are using 4.7.
Any ideas?

Ken,
How does the front-end web application call SAP?
PeteA

Similar Messages

  • I can receive email from my regulare email account but I cannot send. I get an error message that I have to go to settings and enter a password, but when I do the password is there. I have tried re-entering password with the same result.How can I send?

    I am able to receive email, but when I try to reply I get an error message to go to settings and enter a password. My password is there and I have re-entered it with no success. How can I enable send feature from my I Phone?

    You have to go to SMTP settings for your email account and enter a password there. Sended and receiving are two different activities managed by 2 differet servers, and each may require a separate user ID and password.

  • Creating error message in enter query mode

    Thanks u3 and am0x,
    Thanks for your answer.Now i want to implement the same thing for another scnerio.
    Suppose i have entered a certain date but there is no related data in the database for .I am concedering it as a error and want to show a message.
    In the trigger ON-ERROR i have written this code.
    DECLARE
    err_code NUMBER := ERROR_CODE;
    err_type VARCHAR2(3) := ERROR_TYPE;
    msg VARCHAR2(2000) := ERROR_TEXT;
    BEGIN
    IF err_code = 40358 AND err_type = 'FRM' THEN
    message('please enter date as 01-jan-2008');
    END IF;
    IF err_code = 40301 AND err_type = 'FRM' THEN
    message('there is no related data in the database ,please enter the value again');
    END IF;
    RAISE FORM_TRIGGER_FAILURE;
    END;
    But it is not showing any message if there is no related data in the database can you please help.

    That looks like it should work, but you have left out an important line which could tell you why it's not working. If the error code is not one of the two you have specified then there will be no message at all!
    Try this and see what error message you get. Perhaps the code is something other than 40301.
    DECLARE
      err_code NUMBER := ERROR_CODE;
      err_type VARCHAR2(3) := ERROR_TYPE;
      msg VARCHAR2(2000) := ERROR_TEXT;
    BEGIN
      IF err_code = 40358 AND err_type = 'FRM' THEN
        message('please enter date as 01-jan-2008');
      ELSIF err_code = 40301 AND err_type = 'FRM' THEN
        message('there is no related data in the database ,please enter the value again');
      ELSE
        message(err_type||'-'||to_char(err_code)||': '||msg);
      END IF;
      RAISE FORM_TRIGGER_FAILURE;
    END;

  • HT2731 why do i get an error message when entering my credit card information?

    why do i get an error message when entering accurate credit card information?

    If you would like help from these forums then saying what the error message is would be useful.
    The card is registered to exactly the same name and address as you have on your iTunes account ? And it was issued by a bank in the country where you and your iTunes account are ?

  • App store review page:billing add-country : i choose SL (Selangor). Error message: pls enter at most 3 letter or number for country. But there all is 2 letter. Cannot type ourself, all is preset. so can't create a review

    App store review page:billing address - country : i choose SL (Selangor).
    Error message: pls enter at most 3 letter or number for country.
    But what i can choose is all in 2 letter. Cannot type ourself, all is preset. so can't create a review and cannot use my app id to download or update application.

    madeline leo wrote:
    App store review page:billing address - country : i choose SL (Selangor).
    Error message: pls enter at most 3 letter or number for country.
    But what i can choose is all in 2 letter. Cannot type ourself, all is preset. so can't create a review and cannot use my app id to download or update application.
    Please enter at most 3 letters or numbers.  Two letters is fine with that instruction.

  • Error message PLEASE ENTER BUSINESS AREA

    Hi experts,
    Facing problem while doing 531 movement for by product generation by MB1A.
    Getting error message  PLEASE ENTER BUSINESS AREA.
    and for same material accounting document not heat.
    experts suggestion need to resolve issue.
    Waiting
    Bhupendra

    Business area is Pulled based on Division assignment
    Assign the division for that material in basic data view
    and then post

  • Error message F5901-Enter Business Place Value

    Hello Friends and experts,
    I am trying to enter a cross company code vendor invoice posting (vendor line in one company and all the expense lines in multiple co.cds). When I try to post the entry I am getting error message F5901 - Enter Business Place Value.
    The error is coming after we have upgraded to ECC 6.0 EHP5 from ECC 5.0 SP13.
    I have checked the customizing. We have not activated Business Place functionality for any country in our system.
    I did not even find any SAP note in this regards.
    Does someone has any clue on what may be wrong and how to fix it?
    Regards,
    Vishal.

    Hi Tanmay,
    You might have created a validation rule for Business place in order to track the TDS as per Business place. Please check it in GGB0 and OB28 and input the Business place at transaction level if needed.
    Thanks

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Hello.  Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot.  I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

    Hello.  Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot.  I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).  I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue.  I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support.  This also has not resolved the issue.
    When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.”  Verify you have sufficient privileges to start system services.  I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next. 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
    In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
    tt2

  • Every time I TRY to start firefox 18-19 I get an error message : Firefox has stopped working - close the program and check online for a solution - or - close ..

    Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.
    I have tried a Clean reinstall but it did not help.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Every time I TRY to start firefox 18-19 I get an error message : Firefox has stopped working - close the program and check online for a solution - or - close th

    Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

    I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • I have an iPod Touch version 4.2.1, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails.  What can I do to fix this problem?

    I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails.  I have tried deleting and reinstalling iTunes, and the same thing happens.  What can I do to fix this problem?

    Try:
    iOS: If you can't back up or restore from a backup in iTunes

  • I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem-.thanks

    I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem….thanks

    If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

  • The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

    The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

    Try below steps once
    click Gear icon on the top Right corner and Quit Creative Cloud App
    Click on Finder and then hold Command + Shift + G keys on your keypad
    It will open Go to folder window, type  exactly ~/Library and click on Go
    Make sure to open ~/Library not /Library (  there will be two Library folders )
    Then open Application Support > Adobe folders
    Trash AAMUpdater and OOBE folders.
    Then launch Creative Could and check.

Maybe you are looking for