The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check.

Similar Messages

Hi , in the Creative Cloud panel under "APP" i have the following message "download error". What I have to do?

Hi , in the Creative Cloud panel under "APP" i have the following message "download error". What I have to do? Also if I click on "reload application"...the error is still there

Sorry I can not understand what I have to do. Could you please explain me what I have to do?
Messaggio originale----
Da: [email protected]
Data: 02/01/2015 11.01
A: "Francesco Mazzetta"<[email protected]>
Ogg: Hi , in the Creative Cloud panel under "APP" i have the following message "download error". What I have to do?
    Hi , in the Creative Cloud panel under "APP" i have the following message "download error". What I have to do?
    created by Mylenium in Creative Cloud Download & Install - View the full discussion
Troubleshoot Creative Cloud download and install issues
Mylenium
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059129#7059129 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059129#7059129
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creative Cloud Download & Install by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I cant open Photos om my mac. Just upgraded to Yosemite. The message I get is: An unexpected error has occurred. Please quit and restart the application. I have done this several times but nothing seems to work. iPhoto is gone. What do I do?

I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

Safari 5.1 will not change my privacy settings without quitting and restarting the browser.

I have installed Safari 5.1. When I attempt to change the block cookies setting in the privacy preferences, the browser will not change the settings until I quit and restart the browser.

Quit Safari. Open a Finder window. Select your Home folder in the Sidebar on the left.
Open the Library folder then the Cookies folder.
Move the Cookies.plist file from the Cookies folder to the Trash.
Restart your Mac.
If that didn't help, quit Safari. Open a Finder window select your Home folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db file from the com.apple.Safari folder to the Trash. Relaunch Safari.

When the Adobe Application Manager will open the following message: Download error. What should I do

When the Adobe Application Manager will open the following message: Download error. What should I do

is the error some gibberish like : UW44PKU or some code similar to that?
i think the code is U44M1P7.
if this is what happens i think i know what to do, that is if you already have PSCS6 (permanent license) version on you risk before you joined cc.
vince
Message was edited by: vinsolo

What is the procedure to stop and restart the Hyerion Environment

Hi All,
Can you kindly let me know whether the procedure that i am following below is correct to stop and restart the Hyperion Environment.
To Stop:
1) Essbase.
2) Shared Services.
3) BI+ (Financial Reporting)
4) Planning.
5) DB2
To Start:
1) DB2
2) Shared Services.
3) BI+ (Financial Reporting)
4) Hyperion Planning.
5) Essbase.
Is the above procedure correct or do i need to do any changes to it.
Regards,
Krishna.

Hi,
I guess restarting database is not required during the process of restarting Hyperion Environment. Below order is preferable.
Stop:
1) Essbase Administration Services
2) Planning
3) BI Plus Web Apps (Workspace, Web Analysis,..)
4) BI Plus (core)
5) Foundation Services (License services, shared services)
Start:
1) Foundation Services (License services, shared services)
2) BI Plus (core)
3) BI Plus Web Apps (Workspace, Web Analysis,..)
4) Essbase Administration Services
5) Planning
Regards,
Sreemani

Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

Nevermind, I got it working.
I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed.

How do I restore my 27" mid-2011 iMac EXACTLY the way it was after hard disk replacement?

Hi all.
Recently received an email from Apple saying that the 1TB Seagate hard drive in my 27" mid-2011 iMac is apt to fail anytime. Apparently they used some bad hard drives in the mid-2011 27" iMacs which are problematic so they're offering me a free replacement to a brand new hard drive. I'll be sending in my iMac for the replacement sometime in the next few days.
In preparation for it, I've backed up my entire system using Time Machine into an external harddrive. The backup is up to date & includes all system files. I've also made a Lion install disk on an 8GB USB flash/pen drive using Carbon Copy Cloner.
My question is: When I get my iMac back after the hard disk replacement, will I be able to restore my iMac to EXACTLY the way it was before the replacement using the Time Machine backup & the Lion install disk that I've prepared? When I mean EXACTLY, I do mean EXACTLY, e.g I don't have to re-install all the programs I have, my settings for the programs I have will stay intact, everything is where it should be etc...i.e EXACTLY the way my iMac is right now.
If yes, how do I do it? I've read Pondini's guide: http://pondini.org/TM/14.html
However it is less than clear on certain points, e.g in my case, which one do I have to use to restore my system to the way it was...the Time Machine backups I have on the external HDD or the Lion install disk that I made using Carbon Copy Cloner? And how do I go about doing the restore?
I'd appreciate any & all help given. Thanks in advance!

daniirwan wrote:
baltwo: Thanks for your input! I didn't think of wiping the old HDD before sending it in for the replacement..all those sensitive user data! One question: What's a FWHD?
Already answered. Just note that FW is much faster than USB. See http://help.bombich.com/kb/troubleshooting/how-long-should-the-clone-or-backup-t ake for details.
I already have CCC installed so I'll probably try it out. Are the steps outline here the one that I should do to restore the CCC clone when I get my Mac with the new HDD back? See: http://help.bombich.com/kb/overview/restoring-data-from-your-backup#full_volume_ restore
Yes.
Another question: while I'm booted on the backup/clone, and just after I've wiped the old HDD, how do I reinstall the OS to create a generic user account? Will I have to use a Lion install USB disk?
No. IIRC (if I remember correctly), you can either use a saved Lion installer (hopefully it exists on your backup/clone) or use the Recovery HD. If you have the USB stick w/Lion installer on it, use that.

I am downloading the Creative Cloud desktop app on my Mac, and it starts to download but just stalls in the process and doesn't get any closer to finishing. Anyone have any suggestions. I've restarted my computer multiple times and restarted the download,

I am downloading the Creative Cloud desktop app on my Mac, and it starts to download but just stalls in the process and doesn't get any closer to finishing. Anyone have any suggestions. I've restarted my computer multiple times and restarted the download, but to no avail.

uninstall anything cc that's already installed, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and the reinstall, Adobe: Creative, marketing, and document management solutions

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

I have an 21.5 Mid 2011 iMac and i want to upgrade my RAM. Currently I have two 2GB and two free slots. Do I have to put in two 2GB in the free slots or can I use two 4GB or 8GB?

I have an 21.5 Mid 2011 iMac and I want to upgrade my RAM. Currently I have two 2GB and two free slots. Do I have to put in two 2GB in the free slots or can I use two 4GB or 8GB?

You can leave the existing RAM in their current slots and add compatible modules in the empty slots. For best performance, add two of teh same size. Our 2010 iMac 21" shipped with 4GB RAM---two 2GB modules in two of the four slots. I added two 2GB modules to the empty slots and now have 8 GB RAM.
Be sure to order RAM from a trusted Mac-savvy RAM vendor. Some vendors thing a Mac is a hamburger. For over a decade I've bought all our Mac RAM (and we have 18 Macs in teh family!) from one vendor:
http://eshop.macsales.com/shop/memory/iMac/2011/DDR3_21.5_27
The link is to the proper RAM for your Mac.
Crucial.com is also a trusted vendor.

Where did 30GB of unused space on my SSD main drive go? I have a mid 2011 iMac that until yesterday had just 54GB of space occupied on the primary drive. I imported 45 minutes of video from an SD card. Could that have used up the space?

Where did 30GB of unused space on my SSD main drive go? I have a mid 2011 iMac that until yesterday had just 54GB of space occupied on the primary drive. I imported 45 minutes of video from an SD card. Could that have used up the space?

I added an SSD to my 27" 2011 iMac. Although Sahidus is absolutely correct, it is much easier to add an SSD replacing the optical drive, it wasn't that bad to add it using an entirely seperate cable using SATA-III. To me it is worth the extra hassle to install a SATA-III SSD. This is where you are going to get maximum performance.
Although it appears complicated, if you go slow, the procedure to install an SSD drive isn't too bad. It takes at most 3 hours, as long as you are prepared and have all the parts and tools.
http://www.btobey.com/learn/imac-ssd-install.php
This describes how I did it. Now I get awesome data performance from my iMac!
I think the 21.5" may be more difficult to find where to place the SSD. But im sure it is possible. Just be creative.

HT1522 I have a mid 2011 iMac running Lion, and the remote seems not to work at all!

Have been trying to pair my Apple Remote with my mid 2011 imac.
Nothing doing, although if I go and try same remote with an older macbook, it works fine.Battery all fine too, have been checking via digital camera. Something on my iMac is preventing this remote form being seen (and yes I have disabled ir receiving on the laptom after testing it)
any ideas?
thanks for your time!!

Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

HT201457 I have a mid 2011 iMac and have installed windows 8.1 on it I costantly get system thread not handled and kernel security check failure and the Mac restarts

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

What is the max RAM for a mid-2011 iMac?

MMy mid-2011 iMac shows that I can upgrade to 16mb of Ram, but I have redact that I can actually upgrade to 32mb. Which is true?

It can take 32GB of RAM.
(108544)

The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

Similar Messages

Maybe you are looking for