Error message -L3199-Total for assigned quantities exceeds quantity to be removed

Hi,
We are facing problem in picking at last HU in WM while creating transfer order for delivery document in PRD. We reproduced same issue in QXS.
Sales order was created with 40 Drums and also delivery with 40 Drums. Conversion factor mantained in material master is 441 DR = 30000KG, Base unit of measure is KG. While creating TO , we need to insert 5HU(each HU = 8DR) i different line items in TO . Tilll 4th HU is inserted i.e 32 DR(total) there is no issue. But as soon as we enter 5th HU below error is throwing.
Error Message - L3199-Total for assigned quantities exceeds quantity to be removed
In some cases delivery qty is showing more than picked qty (in other deliveries) and hence unable to create or confirm Transfer order.
Appreciate your comments on above issue /resolution or any OSS note/user exits/BADI exists ?
Regards,
Srinivas M

there is a huge amount of decimal dust
1 drum has a weight of 68.02721088435374
calculating the weight of 40 drums (quantity to be removed) in one single calculation rounds different to 5 * 8 drums where you actually have 5 individual calculations with a rounding that is then added to one result (assigned quantity).
Have a look into this KBA, as it explains different reactions based on the screens that are used.
However, I think you will not get lucky by this workaround as the you still have inaccurate quantities for the remaining drums
1926014 - LT03 - Overpicking allowed / not allowed during TO creation in foreground

Similar Messages

Error message appears only for a short time

An error message appears only for a very very short time so i can't read it. Sometimes the message appers directly after log in, and sometimes after using the mac for a longer time. So What should i do?

Thank you for the fast reply.
This is the log of the last start. The message appeared directly after login.
06.03.12 21:37:47,000 bootlog: BOOT_TIME 1331066267 0
06.03.12 21:38:00,000 kernel: PMAP: PCID enabled
06.03.12 21:38:00,000 kernel: Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
06.03.12 21:38:00,000 kernel: vm_page_bootstrap: 2003650 free pages and 77118 wired pages
06.03.12 21:38:00,000 kernel: kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
06.03.12 21:38:00,000 kernel: zone leak detection enabled
06.03.12 21:38:00,000 kernel: standard timeslicing quantum is 10000 us
06.03.12 21:38:00,000 kernel: mig_table_max_displ = 73
06.03.12 21:38:00,000 kernel: TSC Deadline Timer supported and enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
06.03.12 21:38:00,000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
06.03.12 21:38:00,000 kernel: calling mpo_policy_init for TMSafetyNet
06.03.12 21:38:00,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
06.03.12 21:38:00,000 kernel: calling mpo_policy_init for Sandbox
06.03.12 21:38:00,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
06.03.12 21:38:00,000 kernel: calling mpo_policy_init for Quarantine
06.03.12 21:38:00,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
06.03.12 21:38:00,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
06.03.12 21:38:00,000 kernel: The Regents of the University of California. All rights reserved.
06.03.12 21:38:00,000 kernel: MAC Framework successfully initialized
06.03.12 21:38:00,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
06.03.12 21:38:00,000 kernel: IOAPIC: Version 0x20 Vectors 64:87
06.03.12 21:38:00,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
06.03.12 21:38:00,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
06.03.12 21:38:00,000 kernel: [ PCI configuration begin ]
06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 6689
06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagement: (built 18:56:37 Jan 12 2012) initialization complete
06.03.12 21:38:00,000 kernel: console relocated to 0xf10010000
06.03.12 21:38:00,000 kernel: PCI configuration changed (bridge=16 device=5 cardbus=0)
06.03.12 21:38:00,000 kernel: [ PCI configuration end, bridges 12 devices 18 ]
06.03.12 21:38:00,000 kernel: mbinit: done [96 MB total pool size, (64/32) split]
06.03.12 21:38:00,000 kernel: Pthread support ABORTS when sync kernel primitives misused
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
06.03.12 21:38:00,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
06.03.12 21:38:00,000 kernel: AppleIntelCPUPowerManagementClient: ready
06.03.12 21:38:00,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffebc9f3e; max speed s800.
06.03.12 21:38:00,000 kernel: BTCOEXIST off
06.03.12 21:38:00,000 kernel: wl0: Broadcom BCM4331 802.11 Wireless Controller
06.03.12 21:38:00,000 kernel: 5.100.98.75
06.03.12 21:38:00,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
06.03.12 21:38:00,000 kernel: rooting via boot-uuid from /chosen: C48C5E4E-3694-3F9E-87F9-351F848CEC3F
06.03.12 21:38:00,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
06.03.12 21:38:00,000 kernel: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
06.03.12 21:38:00,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST9500325ASG Media/IOGUIDPartitionScheme/Customer@2
06.03.12 21:38:00,000 kernel: BSD root: disk0s2, major 14, minor 2
06.03.12 21:38:00,000 kernel: Kernel is LP64
06.03.12 21:37:49,176 com.apple.launchd: *** launchd[1] has started up. ***
06.03.12 21:37:59,329 com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
06.03.12 21:38:04,363 com.apple.pfctl: No ALTQ support in kernel
06.03.12 21:38:04,363 com.apple.pfctl: ALTQ related functions disabled
06.03.12 21:38:04,389 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
06.03.12 21:38:05,090 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
06.03.12 21:38:05,092 UserEventAgent: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12039
06.03.12 21:38:05,092 UserEventAgent: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
06.03.12 21:38:05,265 UserEventAgent: CertsKeychainMonitor: configuring
06.03.12 21:38:06,000 kernel: Waiting for DSMOS...
06.03.12 21:38:06,000 kernel: BCM5701Enet: Ethernet address 40:6c:8f:00:09:d9
06.03.12 21:38:06,000 kernel: AirPort_Brcm4331: Ethernet address 68:a8:6d:4b:27:58
06.03.12 21:38:06,000 kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
06.03.12 21:38:06,000 kernel: IO80211Interface::efiNVRAMPublished():
06.03.12 21:38:07,000 kernel: AGC: 3.0.16, HW version=1.9.23, flags:0, features:20600
06.03.12 21:38:07,000 kernel: Previous Shutdown Cause: 3
06.03.12 21:38:08,000 kernel: DSMOS has arrived
06.03.12 21:38:08,000 kernel: ** Device in slot: SLOT--1 **
06.03.12 21:38:08,869 com.apple.SecurityServer: Session 100000 created
06.03.12 21:38:09,849 mds: (Normal) FMW: FMW 0 0
06.03.12 21:38:10,000 kernel: macx_swapon SUCCESS
06.03.12 21:38:10,622 airportd: _processDLILEvent: en1 attached (down)
06.03.12 21:38:10,623 mDNSResponder: mDNSResponder mDNSResponder-320.14.0 (Nov 16 2011 01:16:56) starting OSXVers 11
06.03.12 21:38:10,641 com.apple.usbmuxd: usbmuxd-263 on Nov 14 2011 at 18:58:10, running 64 bit
06.03.12 21:38:10,000 kernel: Created virtif 0xffffff8014af6e00 p2p0
06.03.12 21:38:10,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
06.03.12 21:38:10,654 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
06.03.12 21:38:10,654 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06.03.12 21:38:10,655 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06.03.12 21:38:10,663 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06.03.12 21:38:11,283 configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
06.03.12 21:38:11,283 configd: DHCP en1: INIT-REBOOT transmit failed
06.03.12 21:38:11,304 configd: setting hostname to "Saschas-MacBook-Pro.local"
06.03.12 21:38:11,308 configd: network configuration changed.
06.03.12 21:38:13,000 kernel: en1: 802.11d country code set to 'DE'.
06.03.12 21:38:13,000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
06.03.12 21:38:15,057 com.apple.SecurityServer: Entering service
06.03.12 21:38:15,080 systemkeychain: done file: /var/run/systemkeychaincheck.done
06.03.12 21:38:15,090 configd: network configuration changed.
06.03.12 21:38:15,091 configd: network configuration changed.
06.03.12 21:38:15,192 mDNSResponder: D2D_IPC: Loaded
06.03.12 21:38:15,192 mDNSResponder: D2DInitialize succeeded
06.03.12 21:38:15,217 UserEventAgent: ServermgrdRegistration cannot load config data
06.03.12 21:38:15,220 UserEventAgent: get_backup_share_points no AFP
06.03.12 21:38:15,000 kernel: MacAuthEvent en1 Auth result for: bc:05:43:a0:ff:1d MAC AUTH succeeded
06.03.12 21:38:15,000 kernel: wlEvent: en1 en1 Link UP
06.03.12 21:38:15,000 kernel: AirPort: Link Up on en1
06.03.12 21:38:15,000 kernel: en1: BSSID changed to bc:05:43:a0:ff:1d
06.03.12 21:38:15,000 kernel: AirPort: RSN handshake complete on en1
06.03.12 21:38:15,632 rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
06.03.12 21:38:15,696 netbiosd: Unable to start NetBIOS name service:
06.03.12 21:38:17,000 kernel: AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
06.03.12 21:38:17,595 configd: network configuration changed.
06.03.12 21:38:17,596 ntpd: proto: precision = 1.000 usec
06.03.12 21:38:17,727 configd: setting hostname to "saschas-macbook-wlan.fritz.box"
06.03.12 21:38:17,755 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
06.03.12 21:38:17,755 UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
06.03.12 21:38:17,774 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Compound_Blank_10 because it is protected and not on the exception list
06.03.12 21:38:17,777 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
06.03.12 21:38:17,778 configd: network configuration changed.
06.03.12 21:38:17,891 loginwindow: Login Window Application Started
06.03.12 21:38:18,000 kernel: AppleLMUController found an AG vendor product (0x9cb7), notifying SMC.
06.03.12 21:38:22,191 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
06.03.12 21:38:22,719 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
06.03.12 21:38:22,894 airportd: _doAutoJoin: Already associated to “Compound_Blank_10”. Bailing on auto-join.
06.03.12 21:38:22,948 com.apple.SecurityServer: Session 100005 created
06.03.12 21:38:22,950 loginwindow: Login Window Started Security Agent
06.03.12 21:38:23,023 SecurityAgent: Echo enabled
06.03.12 21:38:23,023 SecurityAgent: Echo enabled
06.03.12 21:38:23,702 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
06.03.12 21:38:29,733 SecurityAgent: User info context values set for Sascha
06.03.12 21:38:29,733 SecurityAgent: User info context values set for Sascha
06.03.12 21:38:30,733 SecurityAgent: Login Window login proceeding
06.03.12 21:38:30,733 SecurityAgent: Login Window login proceeding
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | name = Sascha, path = /Users/Sascha, homeLoc = (null)
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter setNeedsToUnmountDirVolumeAtLogout:] | mounter calling mechanism to setNeedsToUnmountDirVolumeAtLogout to 0
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | urlAttribute = null
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | homeDirPath did NOT follow a symlink, keeping original path of: /Users/Sascha
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | homeDirMajorType = 1
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMounter mountStandardDirectoryForUser:atPath:attributes:] | name = Sascha, path = /Users/Sascha, homeLoc = (null)
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMechanism isGuestAccount] | enter
06.03.12 21:38:30,813 authorizationhost: DEBUGLOG | -[HomeDirMechanism isGuestAccount] | Guest account check returning 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter setHomeDirType:] | setHomeDirType to 1
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter mountStandardDirectoryForUser:atPath:attributes:] | returning 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMounter mountHomeDirectoryForUser:atPath:homeLocation:] | returning 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism invoke] | mountHomeDirectoryForUser returns 0
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism updateAndUnlockKeychain] | updateAndUnlockKeychain
06.03.12 21:38:30,814 authorizationhost: DEBUGLOG | -[HomeDirMechanism launchHomeDirFixerToolIfNeeded:] | launchHomeDirFixerToolIfNeeded called with 0
06.03.12 21:38:31,286 loginwindow: Login Window - Returned from Security Agent
06.03.12 21:38:31,308 loginwindow: USER_PROCESS: 37 console
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.AddressBook.PushNotification': unknown error code
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.safaridavclient.push': unknown error code
06.03.12 21:38:31,377 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.syncdefaultsd.push': unknown error code
06.03.12 21:38:31,379 airportd: _doAutoJoin: Already associated to “Compound_Blank_10”. Bailing on auto-join.
06.03.12 21:38:31,486 com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
06.03.12 21:38:31,676 com.apple.launchctl.Aqua: load: option requires an argument -- D
06.03.12 21:38:31,676 com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
06.03.12 21:38:32,033 UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 25095
06.03.12 21:38:33,566 com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[131]) Exited with code: 1
06.03.12 21:38:33,691 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,691 com.apple.dock.extra: 2012-03-06 21:38:33.689 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,691 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,691 com.apple.dock.extra: 2012-03-06 21:38:33.691 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: 2012-03-06 21:38:33.691 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:33,692 com.apple.dock.extra: 2012-03-06 21:38:33.692 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
06.03.12 21:38:35,005 appleprofilepolicyd: appleprofilepolicyd: profiling drivers not loaded, loading
06.03.12 21:38:35,044 com.apple.launchd.peruser.501: (com.facebook.videochat.Sascha.updater[173]) Tried to setup shared memory more than once
06.03.12 21:38:35,671 UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2) file was /private/var/servermgrd//servermgr_certs.lock
06.03.12 21:38:35,673 UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2) file was /private/var/servermgrd//servermgr_certs.lock
06.03.12 21:38:35,673 UserEventAgent: CertsKeychainMonitor: ready to process keychain & timer events
06.03.12 21:38:36,318 com.apple.launchd.peruser.501: (*****-SharedServices[174]) Exited with code: 1
06.03.12 21:38:36,711 Firewall: java is listening from ::ffff:0.0.0.0:0 proto=6
06.03.12 21:38:49,925 coreservicesd: *** process 57 exceeded 500 log message per second limit - remaining messages this second discarded ***

Error message "Maximum number of drilldown characteristics exceeded"

Hello,
an user created a Web report. In the navigation block there are nearly 100 selection fields. If you make either "drilldown in the rows" or "drilldown in the columns" you recieve after 50 drilldowns the error message "Maximum number of drilldown characteristics exceeded" and it is not possible to proceed further. Does anybody has got an idea what this can be?
Thanks!
Regards,
Christian

Hi Check SAP Note No -
Note 144478 - BEx: Termination/Message at 10th/20th drilldown characterstc
1. Terminations occur when you drill down a large number of characteristics at the same time during interactive navigation in the Business Explorer Analyzer (Excel).
2. In the global query definition, the system displays message 'Termination: the maximum number (10/20) of drilldown characteristics is exceeded' if the total of the characteristics and structures you are using exceeds
              - 10 objects in Release 1.2B
              - 20 objects in Release 2.0A/2.0B/2. 1C
              during the definition of a query.
Hope it helps
regards
Vikash

Cancel a SD invoice error message "no authorization for transaction FB08"

Hi Gurus,
I am trying to cancel a SD invoice and am receiving the error message " no authorization for transaction FB08" is coming. Never has this happened in past, i have checked all the security authorizations also and they are in place. Accounting document status is showing as not cleared. Also, as per my understanding cancellation of invoice happens through VF11 which does not calls FB08. Please point out reasons as to why this could be happening and the possible solution thereof.
regards
Anmol Pareek

Hi Anmol
Once you got the error screen, immediately after that goto T code SU53 and expand all link. Take the screen shot and send it to your BASIS team to provide you proper access.
Yes you are correct cancellation is done through VF11 but sometime some programs internally calls other T codes.
take help of your basis team.

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.

I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

Dear ALL,
i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
var myBookFileName ,myBookFileName_temp;
                if ( myFolder != null )
                        var myFiles = [];
                        var myAllFilesList = myFolder.getFiles("*.indd");
                        for (var f = 0; f < myAllFilesList.length; f++)
                                    var myFile = myAllFilesList[f];
                                    myFiles.push(myFile);
                        if ( myFiles.length > 0 )
                                    myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                    myBookFileName_temp=myFolder.name ;
                                    myBookFile = new File( myBookFileName );
                                    myBook = app.books.add( myBookFile );
                                   myBook.automaticPagination = false;
                                    for ( i=0; i < myFiles.length; i++ )
                                               myBook.bookContents.add( myFiles[i] );
                                    var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                    var bookComps = myBook.bookContents;
                                    if (bookComps.length === 1)
                                                   bookComps = [bookComps];
                                     var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                  //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                  //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                    myBook.close(SaveOptions.yes);

Change the below line:
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
to
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
Vandy

When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit

When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
What can I do?

madonnafromqld wrote:
When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
What can I do?
Stop doing that.

ERROR MESSAGE - Ivalid operation for forward only resultset : first 17075

Hi, all, I'm using Jdbc Drive Oracle JDBC driver 8.1.7.0.0 and weblogic. However, when I do:
Statment stmt = (CallableStatement) conn.prepareCall("{call some_pkg.p_searc(?,?,?,?,?,?,?,?,?)}",
ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
ResultSet.first();
I got the error message: Ivalid operation for forward only resultset : first 17075.
Thanks.
Mag

Thanks for your reply. But what I want to use first. One thing I don't understand is why even I use ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY, but the resultset is still not scrollable. How can I get a scrollable resultset. Thanks.

Firefox crashes with error message: "Plugin Container for Firefox has stopped working"

When I open Firefox it seems to be working fine for one minute, then everything freezes and I receive the following error message:
"Plugin Container for Firefox has stopped working
--> Check online for a solution and close the program
--> Close the Program"
Neither option restores Firefox and I'm left with a frozen (white blurry Not Responding) screen. When I click on the X button, then I get the regular "Firefox is not responding" message and the whole program just shuts down.
Should I disable all plugins and / or this plugin container? How can I do that, if Firefox keeps crashing?
Basically, how can I fix this? Thanks a lot!

I found the issue was with the Nik Filters I was using. The filters were messing with Photoshop's initializing. I uninstalled and reinstalled the filters and now Photoshop works like a charm.
It appears this forum is dead?!
Thankfully, I was able to troubleshoot on my own and figured out the problem...

Error message: The data for filename was already added to the form

I recently modified an existing data-collection PDF - only mod was to add some additional pull-down menu options in two fields. I went thru the Distribution wizard, tested the revised form, added the PDF to the Responses file...everything seemed fine. Next day, I distributed the revised form, and had 22 submissions. When adding the 22 submissions to the Response file, 6 or 7 bounced with the error message "The data for <filename> was already added to the form", even though that was not true. I went back, cleared all, and added one of the "bad" files to the response form. It went in OK, but I could not add another "bad one". Although several of the forms may be submitted by the same person, the data is different in all of the submissions, plus, we've been doing this procdure for over a year and never had an issue until now.
The original form may have been created in Acrobat X, and I have Acrobat 9 Pro. Not sure if that is part or all of the answer. Thanks for any insights...I saw a posting in the Reader side, but I can't see any answers.

Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang

Error messages or information for the invalidation of those procedures

Hello expert:
I have a few procedure invalidated . in principle , those procedures should be validated automatically when they are called somewhere. but they don't, that means there are some error blocking them validated. please where I can find out corresponding error messages or information for the invalidation of those procedures.
Many Thanks.

CREATE TABLE t
AS
   SELECT 1 id FROM DUAL;
CREATE OR REPLACE PROCEDURE my_procedure
AS
   v_id   t.id%TYPE;
BEGIN
   SELECT id INTO v_id FROM t;
END;
CREATE OR REPLACE PROCEDURE my_proc2
AS
BEGIN
   my_procedure;
END;
exec my_proc2;
DROP TABLE t;
ALTER PROCEDURE   dsamstrc.my_proc2
   COMPILE;
SELECT *
FROM SYS.USER_ERRORS
WHERE NAME = 'MY_PROC2'
       OR NAME IN (SELECT REFERENCED_NAME
                     FROM dba_dependencies
                    WHERE NAME = 'MY_PROC2');
NAME     TYPE     SEQUENCE     LINE     POSITION     TEXT     ATTRIBUTE     MESSAGE_NUMBER
MY_PROCEDURE     PROCEDURE     4     4     2     PL/SQL: SQL Statement ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     3     4     27     PL/SQL: ORA-00942: table or view does not exist     ERROR     0
MY_PROCEDURE     PROCEDURE     2     2     10     PL/SQL: Item ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     1     2     10     PLS-00201: identifier 'T.ID' must be declared     ERROR     201
MY_PROC2     PROCEDURE     2     3     5     PL/SQL: Statement ignored     ERROR     0
MY_PROC2     PROCEDURE     1     3     5     PLS-00905: object DSAMSTRC.MY_PROCEDURE is invalid     ERROR     905wonder if something like this would work if the dependencies were more than 2 deep.
SELECT distinct *
FROM SYS.USER_ERRORS
WHERE NAME in
       (SELECT name
        FROM dba_dependencies
connect by nocycle name = prior referenced_name
start with NAME = 'MY_PROC2')
order by name;Edited by: pollywog on Apr 4, 2011 2:49 PM

Script Error message when checking for updates....

Post Author: rcoleman
CA Forum: General Feedback
Getting a Script Error message when checking for updates or logging in to Crystal Reports. CR Developer v XI 11.0.0.1994.
Script Error
Line 481
Position 41
If g3()=True then main=True: Exit Fun
FYI to the Site Administrator

parkerpress wrote:
Any idea how to solve this if I haven't activated the 3GS service? I've been doing fine on wireless only.
Steve
Same problem here. After upgrading to iOS 4.2.1 a couple of weeks ago I'm getting the same error as the OP in the first post. I've never activated the 3G service.
I tried turning the cellular service on and checking for updates, pulled and replaced the SIM card, rebooted, nothing helps. I'm still getting the error when I click on the "Check for Update" button in iTunes (v10.1) when my iPad 64GB 3G is connected to my iMac. Any help would be appreciated. TIA.

Error message: The request for account "iCloud" failed. The server responded with "400" to operation CalDAVUpdateShareesQueuableOperation.

I created a new public iCAL. Trying to send invitations to join and am receiving this error message:
The request for account “iCloud” failed.
The server responded with
“400”
to operation CalDAVUpdateShareesQueuableOperation.
Tried copying the URL link provided for the Calendar into a MailChimp announcement. Not working.
I've tried the uncheck calendar method on iCLOUD and re-checking to stop the pop-up message.
Is this perhaps because they don't have an iCLOUD account? If they have iTUNES, shouldn't it work?
Appreciate any help.

Try this first:
In iCal Preferences…, choose Accounts, then select the account that is giving you trouble. Uncheck the box labeled Enable this account. Wait a few seconds, then re-check the box. This should solve the problem.

TS4268 I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activati

I upgraded from the 4s to the 5s on Tuesday and requested my O2 number be carried over to my new EE contract. Everything has been carried over fine but i have been unable to switch on Imessage and Facetime, Error message shows 'Waiting for Activation' I've done the the resets and followed the instructions from the Apple Help page but still can't get it to switch on??

If you say you have done everything in this article: http://support.apple.com/kb/ts4268, then you should probably contact your carrier for their advice.

Why do I keep getting the error message "insufficient content for edit"?

I'm following a tutorial to create crawling text but when I come to superimpose it onto my video, I get the error message "insufficient content for edit"?
The crawling text lasts for 10 seconds.
I'm confused

I usually get that error when I'm trying to cut in a shot that FCP decides is lacking in content. It might be a perfectly good shot on its own, but it doesn't really add to the story. When I step back and think about it, the program is usually right. I also sometimes get "Edit operation had no effect" which is a little harsh. I like to think my edits have some effect.

Error message -L3199-Total for assigned quantities exceeds quantity to be removed

Similar Messages

Maybe you are looking for