Error message need to display on other screen

Hi All,
I have implemented the enhancement implimentation for one perticular transaction code and i am valdating the one field in the one sub screen and i am displaying the error message. but its displaying in that subcreen.
But my requirment is i need to display that message in another sub screen.
can any body tell me how it is possible to do the validations on one screen and displaying the error message in another screen.
Thanks.

HI,
Is that subscreen is under tabstrip.....then you can use the sy-ucomm ....
Thanks,
Shailaja Ainala.

Similar Messages

Error message disble the Fields in Selection Screen

Hi,
In my Report i am validating some fields as mandatory.
If the field is initial then one Error message should be display in the screen and user has to modify the selection screen.
But after displaying the errro message my selection screen is input disable except the mandatory field.
I want all the fields should be input enable.
Sample code for Error message,
MESSAGE E018 WITH 'Enter Plant'.
Please provide the code for this.

Performing checks on SELECTION-SCREEN
- if the check uses only one independent field (e.g.: value exist in a table) use a[ AT SELECTION-SCREEN ON <field>|http://help.sap.com/abapdocu/en/ABAPAT_SELECTION-SCREEN_EVENTS.htm#!ABAP_ALTERNATIVE_2@2@], the field will be editable when error is raised
- if the check uses some fields, group them using [SELECTION-SCREEN BEGIN OF BLOCK <block>/END OF BLOCK <block>|http://help.sap.com/abapdocu/en/ABAPSELECTION-SCREEN_BLOCK.htm] and then [AT SELECTION-SCREEN ON BLOCK <block>|http://help.sap.com/abapdocu/en/ABAPAT_SELECTION-SCREEN_EVENTS.htm#!ABAP_ALTERNATIVE_4@4@], each field of the block will be editable when error is raised
So, if you really want that each and every field be editable when an error is raised, declare every parameter and select-options in a big block, and perform the check in a unique AT SELECTION-SCREEN ON BLOCK xxx.
Use Error message, Warning and Information don't break the flow of the report.
Regards,
Raymond

Error Message is not displayed on the pop screen for chain end chain

Hi,
I have called a screen in one of the standard program using enhancmenets,
and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
regards
afzal

Hi,
have you tried option "LIKE" with instruction MESSAGE.
Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
And instead of using a MESSAGE instruction, why to not use a popup ?
Like using one of these function modules (for instance):
TMS_BCU_POPUP_TO_CONFIRM
POPUP_TO_CONFIRM_STEP
POPUP_TO_DECIDE
FC_POPUP_ERR_WARN_MESSAGE
etc...
If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
Regards
Mickael

Validation error message is not displayed for an attribute as an Input List Of Value

Hi everyone,
I use jdev 11.1.1.7.0
In my application I've created an Entity Obj and a View Obj base Employees table.
for the JobId attribute I've taken actions as listed below:
1. in Employees EO I've created a validation for this attribute and in some cases an error message returns (the error message is "the salary is not high"):
 * Validation method for JobId.
 public boolean validateJobId(String jobid) {
 if (...) {
 return false;
 if (...) {
 return false;
 if (...) {
 return false;
 return true;
2. in Employees VO I've created a LOV for this attribute (the view accessor is JobsViewObj ) and I display the attribute as an Input Text with List Of Values.
in jspx page I drag& drop this attribute as below:
 <af:inputListOfValues id="jobIdId"
 popupTitle="Search and Select: #{bindings.JobId.hints.label}"
 value="#{bindings.JobId.inputValue}"
 label="#{bindings.JobId.hints.label}"
 model="#{bindings.JobId.listOfValuesModel}"
 required="#{bindings.JobId.hints.mandatory}"
 columns="#{bindings.JobId.hints.displayWidth}"
 shortDesc="#{bindings.JobId.hints.tooltip}"
 autoSubmit="true">
 <f:validator binding="#{bindings.JobId.validator}"/>
 </af:inputListOfValues>
I open the Popup and I select a row from the Popup list and then I click Ok. After that if the validation method(validateJobId) returns false, the error message("the salary is not high") must be show to the user. but the error message doesn't display. I don't understand why this happens.
Can anybody guide me about this problem?
Regards
Habib

yes, you're right, I've tested it in 12.1.3 and error message was displayed.
it seems it's a bug(bad bug ) in both 11.1.1.7 and 12.1.2. and now what can I do? is there any way to display the the error message?
Regards
Habib

Error message needs to be generated in case of change in released PO.

Hi all,
please help me how to solve this issue
issue1:
Error message needs to be generated in case of change in released PO.
1) change in incoterms,
2) payment terms,
3) quantity
4) rate.
The system should allow for change on the higher side.

Hi ,
I think you point no 3 & 4 can be solved using option available in release startegy and for point 1 & 2 u have to try with some user_exits. I think so , others can comment on this .
Thanks
Dipak

New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

So where is LR trying to copy the files? Check your destination in the Import panel at the right.

During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
Issues 1) playbook wont connect to desktop manager anymore
2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account.
3) my Phone when connected to desk top software shows the calendar as read only
4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies."
I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!!
someone please help me. !!
I know you are going to ask I have updated everything last time and it is all as update as it can get.
As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts

Did you try to eboot the your PC or laptop where your device is connected ?
I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

LSO_CHECK_BOOKING custom error messages are not displayed

Hi,
Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
Is there a way for me to display my custom error message instead of the predefined SAP message?
Thanks a lot.
Cheers,
James

Hi James,
You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
Learning Portal:
The framework of the existing design of the Learning Portal does not
allow customer specific error messages to be displayed in the portal.
Only a generic message will be displayed when prebooking in the learning
portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
application does not expect to raise an exception from the BADI. If the
BADI processing is assumed to be unsuccessful, the messages filled by
the BADI will be ignored and a general error message will be displayed
in the portal.
So this is basically a design limitation.
Administrator Portal:
Have you tried e.g. the following notes?
SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
Regards,
Agnes

Error Message "No batch input data for screen SAPMF05A 0700" for FV60&FB60

Dear All,
I doing a BDC Upload program for Create Vendor Invoice and Park using FV60 ,But i can't upload successfully by Batch Input method and i am gettin the Error Message "No batch input data for screen SAPMF05A 0700'.I tried using FB60 and got the same error message. When i do in the direct method i can able to do it ,But can't park the document successfully and can do it untill sumilate only.
How to overcome this issue and if you already encounter this kind of problem please advice me.
Thanks in Advance.
Deesanth

Hi,
Below is my recording.
    perform bdc_dynpro      using 'SAPMF05A'     '1100'.
    perform bdc_field       using 'INVFO-ACCNT' gwa_inv_up-lifnr.
    perform bdc_field       using 'INVFO-BLDAT' gwa_inv_up-bldat.
    perform bdc_field       using 'INVFO-XBLNR' gwa_inv_up-xblnr.
    perform bdc_field       using 'INVFO-BUDAT' gwa_inv_up-budat.
    perform bdc_field       using 'INVFO-MONAT' '9'.
    perform bdc_field       using 'INVFO-BLART' gwa_inv_up-blart.
    perform bdc_field       using 'INVFO-WRBTR' gwa_inv_up-dmbtr.
    perform bdc_field       using 'INVFO-WAERS' gwa_inv_up-waers.
    perform bdc_field       using 'INVFO-XMWST' gwa_inv_up-xmwst.
    perform bdc_field       using 'INVFO-MWSKZ' 'P0'.
    perform bdc_field       using 'INVFO-SGTXT' gwa_inv_up-sgtxt.
    perform bdc_dynpro      using 'SAPMF05A'     '1100'.
    perform bdc_field       using 'BDC_OKCODE'   '=PAYM'.
    perform bdc_field       using 'INVFO-GSBER' gwa_inv_up-gsber.
    perform bdc_dynpro      using 'SAPMF05A'     '1100'.
    perform bdc_field       using 'BDC_OKCODE'   '=BS'.
    perform bdc_field       using 'INVFO-ZLSCH' gwa_inv_up-zlsch.
    cnt = 1.
    cnt1 = 1.
    clear gwa_inv_line.
    loop at gt_inv_up into gwa_inv_line where indic = 'D'
                                   and count = gwa_inv_up-count.
      if cnt1 gt 1.
        concatenate 'ACGL_ITEM-MARKSP(' cnt ')' into fld.
        perform bdc_field using fld 'X'.
        perform bdc_dynpro using 'SAPMF05A' '1100'.
        perform bdc_field using 'BDC_OKCODE' '=0005'.
      endif.
      concatenate 'ACGL_ITEM-HKONT(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-lifnr.
      concatenate 'ACGL_ITEM-SHKZG(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-shkzg.
      concatenate 'ACGL_ITEM-WRBTR(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-dmbtr.
      concatenate 'ACGL_ITEM-MWSKZ(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-mwskz.
      concatenate 'ACGL_ITEM-SGTXT(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-sgtxt.
      concatenate 'ACGL_ITEM-GSBER(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-gsber.
      concatenate 'ACGL_ITEM-KOSTL(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-kostl.
      concatenate 'ACGL_ITEM-PROJK(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-posid.
      concatenate 'ACGL_ITEM-FISTL(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-fistl.
      concatenate 'ACGL_ITEM-FIPOS(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-fipos.
      concatenate 'ACGL_ITEM-GEBER(' cnt ')' into fld.
      perform bdc_field       using fld gwa_inv_line-geber.
      perform bdc_field       using 'BDC_CURSOR' fld.
      cnt1 = cnt1 + 1.
    endloop.
    perform bdc_dynpro using 'SAPMF05A' '1100'.
    perform bdc_field using 'BDC_OKCODE' '=BS'.
    perform bdc_dynpro      using 'SAPMSSY0' '0120'.
    perform bdc_field       using 'BDC_OKCODE' '=BP'.
    call transaction 'FB60' using gt_bdcdata mode 'N' pdate 'S'
                                    messages into gt_bdc_messages.
Thanks,
Deesanth

Help! My iPhone 4 can not be switched on as it went off while updating. The error message come up on the itune screen to restore the phone but it can not be restored. Now I want just the phone to be on so I can use it!!!!

The error message come up on the itune screen to restore the phone but it can not be restored. Now I want just the phone to be on so I can use it!!!!

Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH.

Stop Transaction Error Message Doesn't Display

Hi,
I am using a custom message, like "Results Not Yet Confirmed", in the Stop Transaction action. But this error message is not displaying when I run the JavaScript code. I used the expression "document.<AppletName>.getValue(1,1)".
Any clues?
Regards,
Chanti.

Hi Chanti,
What display type are you using? An iGrid? If so, try
document.appletName.getErrorMessage()
Otherwise, please provide more details - the display type and which MII version you are using.
Kind Regards,
Diana Hoppe

Display error message from SLG1 on shopping cart screen

I have implemented a 'BBP_CATALOG_TRANSFER' badi. I am adding all the custom error messages in ET_SC_MESSAGES export parameter of this badi. As a result of this, all the custom error messages added in the above parameter, gets logged in the application log SLG1 automatically and I can see those custom messages in SLG1. Now how to display this message from SLG1 on the shopping cart screen on the top where you normally see standard error messages in red.
Can anyone please help me on this?
Thanks,
Krupa

Hi
Which SRM version are you using ?
I have not tried this... but I think this is not possible to display error messages
using BBP_CATALOG_TRANSFER BADI.
Try to code your logic in using BBP_DOC_CHECK_BADI for filter type - BUS2121 (shopping cart). You need to add your custom message in ET_MESSAGES [] table.
For sample coding, refer to the link below ->
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/bbp_doc_check_badi-CheckPurchasingDocument&
Hope this will definitely help.
Do let me know.
Regards
- Atul

Error Messages to be displayed in Interactive Form

Hi All,
I have a requirement in SPPM form to check for the amount and based on that give some warning messages or error messages depending on the amount entered after checking the amount. I am successfully able to track the error when a certain event is triggerred (i.e. Dropdown of PayScale Group/Level) but I need to validate based on the value and give error messages. If someone has done this kind of error handling in Interactive Forms please tell me know.
Also the warning message does not seem to appear any idea why ?
Regards,
Samar.

Hi Samar,
you may check out the adobe designer help for scripting, displaying the messsages etc. store the value in a hidden fieldand do the scripting accordingly.
I didnt get what you meant by 'as this is a free text'.
Kindly update once you find the solution. Hope this helps.
Thanks and Regards,
Anto.
addition *****
FYI, this is what i get on a quick search at the adobe designer help. you may search in the help for all your scripting queries :
messageBox method
Displays a dialog box on the screen. It is available only for client applications.
FormCalc syntax
$host.messageBox( STRING param1 [, STRING param2 [, INTEGER param3 [, INTEGER param4 ] ] ] )
Parameters
param1
A valid string representing the message to display.
param2 (Optional)
A valid string representing the title to appear in the title bar of the dialog window.
param3 (Optional)
An integer representing the icon to display in the dialog box.
0 (Error) - This is the default.
1 (Warning)
2 (Question)
3 (Status)
param4 (Optional)
An integer representing the buttons to display.
0 (OK) - This is the default.
1 (OK, Cancel)
2 (Yes, No)
3 (Yes, No, Cancel)
Returns
A valid integer representing the value of the button pressed by the user:
1 (OK)
2 (Cancel)
3 (No)
4 (Yes)
Examples
JavaScript
// Display the number of child nodes under rootNode.
xfa.host.messageBox("Number of nodes under rootNode after appending clone: " + xfa.record.nodes.length);
Message was edited by:
Antony John Isacc

Problem in BADI, error message not getting displayed

Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.

Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
 IF l_s_eban-estkz NE 'B'.
 CLEAR v_mtart.
 SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
 IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
 MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
 ENDIF.
 ENDIF.
 IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
 IF l_s_eban-knttp NE 'A'.
 IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
 AND l_s_eban-matnr EQ space.
 MESSAGE e000(zm_msg) WITH 'You cannot create'
 'a PR without material number'.
 ENDIF.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDMETHOD.
Reward points for useful Answers
Regards
Anji

My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

Error message need to display on other screen

Similar Messages

Maybe you are looking for