Error Message Problem !?

i All!
I have some problem in my database.
If I purposely tried to create a Procedure with Error or any PL/SQL block with error.
If there is any error I couldn`t see the error messages.
It is giving like below
ERROR at line 1:
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-906: Message 906 not found; No message file for product=plsql, facility=PCM
For I try the same PL/SQL in Some other database it is giving the error messages..
I think Some problem in DBMS Packages...
I think It may be DBMS_STANDARD package problem..
I ran all the three
catproc.sqlpupbld.sql and v8pup.sql in my db.
Still I have the problem.
How to solve this ?
What i did was ..
I tried to create one proc with error.
SQL> create or replace procedure p1
2 is
3 begin
4 select * from notable;
5 end;
6 /
Warning: Procedure created with compilation errors.
SQL> show err
Errors for PROCEDURE P1:
LINE/COL ERROR
4/2 PL/SQL: SQL Statement ignored
4/16 PLS-00201: Message 201 not found; No message file for
product=plsql, facility=PCM
The Same thing I tried with another database which I have..
SQL> create or replace procedure p1
2 is
3 begin
4 select * from notable;
5 end;
6 /
Warning: Procedure created with compilation errors.
SQL> show err
Errors for PROCEDURE P1:
LINE/COL ERROR
4/1 PL/SQL: SQL Statement ignored
4/15 PLS-00201: identifier 'NOTABLE' must be declared
Previously I was able to see all the error messages by using SHOW ERRor
Now I am not able to see. It is not displaying the error messages.
Give me a suggestion...
Thanks and Regards
Suresh.N

Do you also get that error message when you freshly install windows 7?Perhaps a program which is not responding or is broken.
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Similar Messages

Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).

Quicktime has stopped working message when I open that. Error message: Problem Event Name: BEX

When I try to open Quicktime I get a message saying it has stopped working. The error message says:
Problem Event Name: BEX
Application Name: QuickTimePlayer.exe
Application Version: 7.73.80.64
Application Timestamp: 508900dd
Fault Module Name: QuickTimePlayer.dll
Fault Module Version: 7.73.80.64
Fault Module Timestamp: 508900c0
Exception Offset: 00005b6d
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081
Additional Information: 9da7
Additional Information 2: 9da7586a62744150d954cf6a5ec876d1
Additional Infromation 3: db4f
Additional Information 4: db4f7e51c3cffddbf929f5acfefa97e3
Similarly, when I try to play media on iTunes, or when my iPhone is backing up, I get a message saying iTunes has stopped working with the error:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 11.0.1.12
Application Timestamp: 50c8fc7e
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0800a3bc
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081
Additional Information: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: Same as 2

We'd better check to see if some other application has stashed old versions of QuickTime componentry down in your system files.
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Error message problem in ORDER_SAVE badi.

I have used a error message using MESSAGE statement in ORDER_SAVE badi. The problem is when I press the save button and if the condision fails it shows error message. After if you press enter it shows the order is saved.
It is strange. Please help.

Can you give some more information?
1. Which method of the badi are you using?
2. Do you raise the exception error_occured in this method?
In general, if you use change_before_update method and raise the exception if you do not want to save the order, the order would not be saved. This exception should be raised every time the method is executed if you do not want to save the current order.
See the standard implementation class CL_IM_CRM_BUS20001_UPLOAD.
Hope this helps. If not, post the code, so that I can check.
Prakash

"Not Found" Error Message Problem

Hi All!
I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
Some Specs that might be helpful:
FCP HD 4.5
Dual 2 GHz PowerPC G5
2.5 Gigs DDR SDRAM
Raid 1 with 134.6 Gigs Available Space
SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
A Few JPGs of Photoshop Titles
I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
Emily

They were originally on a PC. That quite possibly could be it.
I just checked all the titles again and they are all RGB.
Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
I was just hoping that someone might have had this problem and knew what to do.
Thanks for your help!

JSP Error Message Problem

I keep getting the following error message when I click login on my sample login page:
Error: 500
Location: /examples/jsp/gcdBB/Login.jsp
Internal Servlet Error:
javax.servlet.ServletException: Syntax error or access violation, message from server: "You have an error in your SQL syntax near '"USERNAME", "PASSWORD") VALUES ('admin','admin')' at line 1"
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:386)
     at jsp.gcdBB._0002fjsp_0002fgcdBB_0002fLogin_0002ejspLogin_jsp_6._jspService(_0002fjsp_0002fgcdBB_0002fLogin_0002ejspLogin_jsp_6.java:97)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.jasper.runtime.JspServlet$JspServletWrapper.service(JspServlet.java:174)
     at org.apache.jasper.runtime.JspServlet.serviceJspFile(JspServlet.java:261)
     at org.apache.jasper.runtime.JspServlet.service(JspServlet.java:369)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:503)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:160)
     at org.apache.tomcat.service.TcpConnectionThread.run(SimpleTcpEndpoint.java:338)
     at java.lang.Thread.run(Unknown Source)
Root cause:
java.sql.SQLException: Syntax error or access violation, message from server: "You have an error in your SQL syntax near '"USERNAME", "PASSWORD") VALUES ('admin','admin')' at line 1"
     at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:1628)
     at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:886)
     at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:945)
     at com.mysql.jdbc.MysqlIO.sqlQuery(MysqlIO.java:917)
     at com.mysql.jdbc.Connection.execSQL(Connection.java:1806)
     at com.mysql.jdbc.Connection.execSQL(Connection.java:1740)
     at com.mysql.jdbc.Statement.executeUpdate(Statement.java:1309)
     at jsp.gcdBB._0002fjsp_0002fgcdBB_0002fLogin_0002ejspLogin_jsp_6._jspService(_0002fjsp_0002fgcdBB_0002fLogin_0002ejspLogin_jsp_6.java:87)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.jasper.runtime.JspServlet$JspServletWrapper.service(JspServlet.java:174)
     at org.apache.jasper.runtime.JspServlet.serviceJspFile(JspServlet.java:261)
     at org.apache.jasper.runtime.JspServlet.service(JspServlet.java:369)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:503)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:160)
     at org.apache.tomcat.service.TcpConnectionThread.run(SimpleTcpEndpoint.java:338)
     at java.lang.Thread.run(Unknown Source)
How can i solve this error?

Here is the section of code in question:
<%
Class.forName("org.gjt.mm.mysql.Driver");
java.sql.Connection connection=java.sql.DriverManager.getConnection
("jdbc:mysql://localhost:8080/gcdBB_db");
java.sql.Statement statement = connection.createStatement();
Enumeration parameters = request.getParameterNames();
if(parameters.hasMoreElements())
String usernameValue = request.getParameter("username");
String passwordValue = request.getParameter("password");
statement.executeUpdate("INSERT INTO USERS (\"USERNAME\", \"PASSWORD\") VALUES ('"+usernameValue+"','"+passwordValue+"')");
%>
Any ideas to solving the problem?

How do I resolve Playback Error Message: "Problem syncing MIDI with audio."

I recently bought the Nexus2 instrument. After backing up all my files last week, the Nexus content wasn't being read (it aparently got moved somehow), and I had to contact their support to resolve the problem. As soon as that problem got fixed, Logic quit playback altogether. Everytime I hit Play, I just get an error message that says "problem syncing MIDI and audio," and the the only sound coming out of the speakers is a high-pitched humming. How do I go about fixing this?
thanks,
Shane

Check your Internet connection.

Cmd.-Shift-3 & -4 error message problem

After having worked all right forever, suddenly when I try to do a screen capture on my MacBook, an error message window is generated which says:
"Screen capture failed
The attempt to take a screen capture has failed.
The error is: 'Unable to create type string.'"
I have tried numerous things (DiskWarrior, logging out, restarting) to no avail. Anybody know what to do to correct this on a MacBook (early 2009) with Leopard 10.5.8.

I checked the preference files using Terminal as you suggested, and nothing was reported as corrupted.
The application "Grab" does work (of which I was unaware or at least about which I'd forgotten!) without apparent problems.
I deleted the Finder and ScreenCapture plist files and emptied the trash to no avail--trying cmd-shift-4 afterwards still produced the identical error message window.
I've not yet tried Tony's suggestion of moving all the preference files to an untitled folder and restarting, as I'm in the middle of some things in other programs which I don't yet want to interrupt, but I'll try that next.
Another thought which just occurred to me: I seem to remember browing some place where a program was downloadable which allowed one to change the format of screen capture files from png files to other formats (pict, jpeg, tiff, etc.) I don't recall either downloading or doing this, or now even the name of the program, but could some program like that have messed up the screen capture function to produce this type of "string" error message?

Validation "Error Message" problem

In APEX 4.2 i have under "Page Processing"-->"Validations" my valdidation rule created with name "10 validate report".
My APEX Validation attributes are:
Type="Function Returning boolean"
Validation Expression 1 = "return rpt_utl_pkg.validate('my_db_pkg.validate(:p1, :p2, :p3, :p4, :p5)');"
"*Error Message (Value Required)"="Error in data".
Attribute "When Button Pressed"="SAVE", the validation runs when i click button SAVE, and the validation logic is inside a plsql function where i throw business errors with such code:
apex_error.add_error (
        p_message          => 'Message 1',
        p_display_location => apex_error.c_inline_in_notification );
apex_error.add_error (
        p_message          => 'Message 2',
        p_display_location => apex_error.c_inline_in_notification );
....My plsql function successfully throw those 2 error messages and those are put to the page header.
But problem is that also phrase "Error in data" is didsplayed as 3rd message.
How can i do so that the 3rd message "Error in data" wouldn't appear?
I only want the report to show messages:
Message 1
Message 2
I cannot leave the field "*Error Message (Value Required)" empty. And if i put a space character there, then also it prints 3rd row but with no text, but still 3rd row starting bullet symbol is there.

Just for futher reference
CharlesRoos wrote:
If I change "Validation Expression 1" with adding "true or" into expression to get always True:
return (true or rpt_utl_pkg.validate('my_db_pkg.validate(:p1, :p2, :p3, :p4, :p5)'));Result is that i get don't get any error message shown at all. I get message that data was saved successfully, but the "apex_error.add_error" clauses were executed successfully.This is because rpt_utl_pkg.validate never gets executed.
Personally I would turn rpt_utl_pkg.validate into a procedure instead of a function.
The validation code would then be
rpt_utl_pkg.validate('my_db_pkg.validate(:p1, :p2, :p3, :p4, :p5)');
return true;If rpt_utl_pkg.validate has to be a function I would do
declare
v_dummy boolean;
begin
v_dummy := rpt_utl_pkg.validate('my_db_pkg.validate(:p1, :p2, :p3, :p4, :p5)');
return true;
end;This makes it clear that the function will always return true.
Together with a good documentation in the validation of why that is will makes it's use clear for a different developer who happens to stumple on the code in the future.
Nicolette

InDesign CC Out of Memory Error message problem

I am getting an Out of Memory Error message in InDesign CC and it is crashing. Very unusual and not a particularly lage file. Contains a few PDFs and crashes tend to be when scrolling- is it a screen redraw problem?

Does it have an SSD or conventional hard drive? How much free space?
For testing you should create and log into a new user account and see if the problem persists. That will narrow the possibilities to either user-related or document/application/system problems of some sort. Is this happening frequently? More than the one file? If it's just the one, try this: Remove minor corruption by exporting

BIG error message problem

From what I can see alot of others like myself are having the same problem. Whenever songs or movies are bought, especially with redeemable gift cards, error messages pop saying the network has timed out or the itunes store cannot connect or some bull like that.
If anyone has a fix to this problem that actually works posting it would be much appreciated.

No fix my man. I think it's just traffic. I was able to redeem my cards after a while but haven't been able to purchase anything yet.
Keep at it.

Error Message Problem logging in

Having a problem logging into iChat. Gives me this error message "The iChat Agent process has unexpectedly quit, disconnecting you from all service. Logging in again will restart it." I have tried everything I can think of short of completely reloading leopard. Any thoughts??

Delete com.apple.ichatAgent.plist and restart iChat to recreate it from defaults.
It is in Users/(your account)/Library/Preferences which you have to go to Manually
9:03 PM Thursday; July 17, 2008

Qosmio G20 error message: problem with cooling system has been detected

I am attempting to fix a Qosmio G20 (which is about 3 years old, so no longer in warranty).
The error message is: Warning: A problem with the cooling system has been detected.
I have managed to remove the outer case and observe the machine working, and basically one of the fans is not operating at all. The fan which is nearest to the power connector seems to be working fine (it seems to spin quite a lot, dont know if this is normal), it is the other fan which does not seem to move at all.
When I reattached the case and switched the machine on I noticed after a few minutes that the heatsink vent of the working fan got quite warm, whereas the vent of the non-working fan stayed cool.
I have cleaned the fan of dust and have also altered the BIOS to battery mode from high performance mode, but still the problem exists.
I would be grateful if someone could advise whether the problem is the fan or something else.
If the fan is the problem, where can I buy one from (I live in the UK)?

Hi
In my opinion there could be something wrong with the cooling module and the replacement would be necessary.
Usually this should be done by an authorized service provider (ASP) in your country.
The technicians could replace it with a new part and also could renew the thermal grease which is placed between the cooling module and CPU.
Therefore contact the ASP in your country and ask for the further handling!!!
By the way; you can purchase the cooling module also from the ASP!!!
Good luck

FI Validation rule error message problem at line item level

Hello all.
I have created a step within an FI Validation rule (OB28) at the document line item level. I have set the message to "E" for an error. I have generated the validations. When I test my step, the error is triggered, but triggered as an Information popup - warning and does not give me a hard stop. Does anyone have an idea why this may happen? I need this to be a hard stop but not a cancellation of the document entry. I am using FV60 to enter my document.
Thanks for help.
mvp0821

OSS note # 863267 explains answer. Cannot create "error" message on ENJOY transactions - FV60 is included in this list. "E" works on classic transactions.
Thanks for thinking about this.

Error message/problem connecting 5G iPod to my Windows XP computer (code 28

Whenever I try to connect my new 5G iPod or my Olympus C700 camera I always encounter a problem. Upon connection I get the "New Hardware Found" message and the device is properly identified. However, immediately afterward I get
a Hardware Update Wizard screen which gives the following message: "CANNOT INSTALL THIS HARDWARE There was a problem installing this hardware: (the device is always properly named here)" The message goes on to say: "An error occurred during the installation of this device. The filename, directory name or volume label syntax is incorrect" Sometimes the camera photo download will work despite this message, but the iPod never works. If I look at the device manager, the camera and the iPod are always shown with a yellow question mark. If I click on it I get the same message for both camera and iPod--"Code 28, driver not installed" I have tried numerous times to
reinstall the drivers but nothing ever works. Both of these devices work properly on my other computer running Windows 2000. Can anyone tell me how to get them to work on the computer running XP Home??

Yes, the software on the disc can be used more than once but it is the same software you download from www.itunes.com.
The website has a newer version though.
Uninstall it from your work computer and reinstall it.

Error Message Problem !?

Similar Messages

Maybe you are looking for