Error Messages : ORA - 37118, ORA - 06512
When i'm starting the oracle workspace manager software and trying to create a new workspace related to a schema, after to be connected to a database instance,
I get those error messages: ora - 37118, ora - 06512
Hi,
I have never encountered an ORA-37118 error during createWorkspace. The following is the description for the error.
// Cause: In shared-server mode, the OLAP API library should be loaded
// during process initialization to ensure that the C++ virtual table
// addresses are identical in all shared-server processes. The
// OLAP API session was executing in a process in which the library
// had not been loaded.
// Action: Set option XSOLAPILOAD_AT_PROCESS_START to SHARED_SERVER or
// ALWAYS, restart the instance, and try again.
You should try the suggested action, to see if it fixes the problem. You could also try another database to see if the error is specific to the database instance. If not, I would need additional information regarding your setup to be able to determine why the createworkspace procedure might not be working. What version of workspace manager are you using ?
Regards,
Ben
Similar Messages
-
ORA-12705 Error Message while trying to connect to the DB
A colleague of mine has been trying to connect to the DB through PL/SQL Developer. The error message returned is :
ORA-12705: invalid or unknown NLS parameter value specified
Checked the registry for NLS_LANG which is set to NA. I did that because the ORA message references the NLS_LANG parameter. However, I doubt that is the problem. Went about to create a new TNS Name entry through Oracle NET Manager and get the same Error Message while performing the TEST function.
Any clues ? I am clueless at this point.This can occur with any NLS_ environment variable of registry value.
Your assertion ' the ORA message references the NLS_LANG parameter' is incorrect.
You can set NLS_TERRITORY, NLS_DATE_FORMAT etc, etc, etc.
The order of precedence is environment variable, registry, Oracle provided default.
To find out what is going on set every NLS related environment variable to the empty string.
In sqlplus
select * from v$nls_valid_values
will show you what can be set,
This error will also occur when you installed the software with English as the only language.
SQL developer doesn't use tnsnames.ora
The new tnsname entry has nothing to do with it.
You have an incorrect environment variable or registry value somewhere
(in HKLM\software\oracle)
Sybrand Bakker
Senior Oracle DBA -
We're using 6i, and I'm trying to find the pl/sql error messages, such as ORA-04098. I can never seem to find these and searching on them is no help. Can you point me in the right direction?
Thanks,
TomOracle's messages are listed in the 'Oracle9i Database Error Messages' manual. Also available at:
http://download-west.oracle.com/docs/cd/B10501_01/nav/docindex.htm -
SQL*LOADER ERROR 비교 (ORA-2359, ORA-1401)
제품 : ORACLE SERVER
작성날짜 : 2002-04-09
SQL*LOADER ERROR 비교 (ORA-2359, ORA-1401)
==========================================
PURPOSE
SQL*LOADER 를 사용하는 경우 ORA-2359 ERROR가 나는 경우와
ORA-1401 ERROR가 나는 경우를 비교한다.
Examples
table 의 desc가 다음과 같다고 가정하자.
SQL> create table test5(a varchar2(1000));
이 경우 delimiter 가 comma 인지 position 으로 구분되는지에 따라 error
message가 달리 나타난다.
1) ORA-2359 : field in datafile exceeded maximum specified length
load data
infile test.dat
replace
into table test5
fields terminated by ','
(a char) 로 실행 시 발생.
---> a char(1000) 으로 하면 error 해결이 가능하다.
2) ORA-1401: inserted value too large for column
load data
infile test.dat
replace
into table test5
fields terminated by ','
(a position(1:2000) char)
---> 이 경우 a position (1:1000) char 로 하면 해결 가능하다 .
* 참고로 + , - 기호와 comma 를 load 하기 위해서는 decimal external을
사용한다. (a position decimal external (10))
Reference Documents
---------------------You hit Bug 3531336
Run the script catcio.sql from $ORACLE_HOME/rdbms/admin directory.
Run this in sys schema.
And then load the data with sqlloader. -
Capturing Oracle Error Messages
Hi when developing some applications, I come across some error messages that I would like to make custom error messages.
for example: ORA-00001: unique constraint (CREATE_USER.IC_ITEM_GENDERS_PK) violated
Is there a way to capture this message and then make a user friendly message. Any info. would be great.
ThanksIf you write your own after-submit processes, you can write an appropriate exception handler, something like
begin
exception when dup_val_on_index -- ORA-0001
then :P1_ERROR := 'Nice error message';
end;Then show some "Error" HTML region with &P1_ERROR. conditional upon P1_ERROR being not null.
AFAIK, there is no way to do this when the error is raised by the wizard-generated automatic DML or MRU processes. For that, you could try to put your error checking code in a Validation (and specify your nice error message). If the validation fails, the after-submit processes are not fired so the "ugly" error messages will not be seen by the user.
Hope this helps. -
Error Page with my own Error Message based on table
<p class="MsoNormal"><span style="" lang="EN-AU">Hi All<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">I want to share my code (based on Apex_Lib code. Thanks Patrick) , maybe can help somebody else<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">Purpose: Replace the DB errors messages ( i.e ORA-00001- primary constraint ) with my own Message fetched from a table.<o:p></o:p> <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">Components: 4 components<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">1. Java Script function ( MyErrorPage )<o:p></o:p><br>2. My Custom Error Page Template<o:p></o:p><br>3. Application item ( you can use any item )<o:p></o:p><br>4. Application Process ( getErrorMsg )<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU"> 5. My Error Table.<span style=""> </span>( Provided just as example )<o:p></o:p><br>6. Display example<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU"> Integration:<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU"> 1 Identify your Error Page Template and Go there. In my case for example is LOGIN<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">1.1 Under Definition / Header. <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU"> Copy the follow JS<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU"> <script type="text/javascript"><br><br>function MyErrorPage(p_err_item,p_err_process)<br>{<br><br> var vElementList = null;<br> var vErrorStack = null;<br> var vOraError = null;<br> var vOraCode = null;<br> var vAjaxRequest = null;<br> var vAjaxResult = null;<br> var vMyMsg = '';<br><br> vElementList = window.document.getElementsByTagName("div");<br> for (i=0; i < vElementList.length; i++)<br> {<br> if (vElementList.className == "ErrorPageMessage")<br> {<br> vErrorStack = (vErrorStack ==null?"":vErrorStack+"<br/>")+vElementList[i].innerHTML;<br> vElementList[i].innerHTML = '';<br> vOraError = vErrorStack.split("ORA-");<br><br> for(var i=1; i < vOraError.length; i++) {<br><br> vOraCode = vOraError[i].substring(0,5);<br><br> vAjaxRequest = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS='+p_err_process,0);<br> vAjaxRequest.add(p_err_item,vOraCode);<br> vAjaxResult = vAjaxRequest.get();<br><br> if (vAjaxResult) {<br> vMyMsg = vMyMsg + vAjaxResult + '<br>' ;<br> } else {<br> vMyMsg = vMyMsg + 'ORA-'+vOraError[i].substring(0) + '<br>' ;<br> }<br><br> }<br> document.getElementById('ORA').innerHTML = vMyMsg;<br><br> }<br> }<br>}<br></script><o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU"> <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">1.2 Under Definition / Header. <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU"><body onload="MyErrorPage('F103_ERR_CODE','getErrorMsg')" #ONLOAD#>#FORM_OPEN#<o:p></o:p> <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">You can replace with your own ITEM and APPLICATION PROCESS<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">2. Under Error Page Template Control<o:p></o:p> <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU"><table summary=""><tr><td><img src="/i/error.gif" border="0" /></td><o:p></o:p><br></tr><o:p></o:p><br><b id='ORA'>Error</b><o:p></o:p><br><tr><td><a href=#BACK_LINK#>#OK#</a></td><o:p></o:p><br><td><br /></td></tr></table><o:p></o:p> <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">3. Application Item <o:p></o:p></span></p><p class="MsoNormal"><span style="" lang="EN-AU">F103_ERR_CODE<span style=""> </span><o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">4. Application Proccess.<o:p></o:p> <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">Name : getErrorMsg<o:p></o:p><br>Process Poing : ON DEMAND<span style=""> </span>( Make sure about this )<o:p></o:p><br>Process Text :<o:p></o:p> <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">declare<o:p></o:p><br><span style=""> </span>l_msg<span style=""> </span>varchar2(500);<o:p></o:p><br>begin<o:p></o:p><br><span style=""> </span>for i in (select msg_code, msg_desc from apex_message<o:p></o:p><br><span style=""> </span>where msg_code = :F103_ERR_CODE ) <o:p></o:p><br><span style=""> </span>loop<o:p></o:p><br><span style=""> </span><span style=""></span>l_msg := 'GEN-'||i.msg_code||': '||i.msg_desc;<o:p></o:p><br><span style=""> </span>end loop;<span style=""> </span><o:p></o:p><br><span style=""> </span>htp.prn(l_msg);<o:p></o:p><br>end;<o:p></o:p> <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">5. Create Apex_message (<o:p></o:p><br><span style=""> </span>id<span style=""> </span>number,<span style=""> </span>-- PK<o:p></o:p><br><span style=""> </span>msg_code<span style=""> </span>varchar2(10)<span style=""> </span>-- UK<o:p></o:p><br><span style=""> </span>msg_desc<span style=""> </span>varchar2(100) );<o:p></o:p><span style=""> </span><o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">6. Scenario: Table or View does not exist coming with 3 "ORA" errors<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">There is only one record in Apex_message with msg_code = '00942' therefor it will replace error message for ORA-00942.<span style=""> </span>( note that value for msg_code is<span style=""> </span>'00942' and not 'ORA-00942' )<o:p></o:p> <o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">Before<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">ORA-06550: line 1, column 28: PL/SQL:<o:p></o:p><br>ORA-00942: table or view does not exist<o:p></o:p><br>ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored<o:p></o:p></span></p> <p class="MsoNormal" style="margin-left: 247.8pt; text-indent: -247.8pt;"><span style="" lang="EN-AU"> After<o:p></o:p><br></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">ORA-06550: line 1, column 28: PL/SQL:<br>GEN-00942: My own Message <o:p></o:p><br>ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored<o:p></o:p></span></p> <p class="MsoNormal"><span style="" lang="EN-AU">I did this because I do not want to create my own DML process for each table<o:p></o:p><br>I hope this can help. <o:p></o:p> <o:p></o:p></span></p> <p class="MsoNormal">Regards</p> <p class="MsoNormal">Marcelo</p>
True the main method does not throw any exceptions, that's because there is no higher level to throw them to (actually it implicitly throws any uncaught exceptions to the JVM). That does not mean that you can't write your own try catch block around the code in the main method.
-
KR TAX LOCALIZATION REPORT 실행시의 ORA-20000, ORA-06512 ERROR MESSAGE
제품 : FIN_AP
작성날짜 : 2002-12-02
KR TAX LOCALIZATION REPORT 실행시의 ORA-20000, ORA-06512 ERROR MESSAGE
===================================================================
PURPOSE
Multi-Org 환경속에서 Kr Tax Localization Report 실행시의 ORA-20000, ORA-06512 Error Message 를 해결한다.
Problem Description
Kr Tax Localization의 Reports가 Error를 발생하고, View Log를 통해 확인한 Message가 다음과 같을 경우
ORA-20000: APP-00001: Unable to find message:
AR_NO_ROW_IN_SYSTEM_PARAMETERS
ORA-06512: "APPS.ARP_STANDARD", 줄 999에서
ORA-06512: "APPS.ARP_STANDARD", 줄 2246에서
ORA-06512: "APPS.ARP_UTIL", 줄 29에서
ORA-06512: "APPS.ARP_UTIL_TAX", 줄 111에서
ORA-06512: "APPS.ARP_TAX_EXTRACT", 줄 6178에서
ORA-06512: 줄 1에서
Workaround
Solution Description
1) fnd_client_info.set_org_context(<org_id>);
or
2) v_org_id varchar2(10);
v_org_id := fnd_profile.value('ORG_ID');
fnd_client_info.set_org_context(v_org_id);
.rdf 의 경우 : Before Report Trigger 에 추가
.sql (Package Body, Procedure) 의 경우 : 각 Begin 절 이후
Reference Documents
-------------------제품 : FIN_AP
작성날짜 : 2002-12-02
KR TAX LOCALIZATION REPORT 실행시의 ORA-20000, ORA-06512 ERROR MESSAGE
===================================================================
PURPOSE
Multi-Org 환경속에서 Kr Tax Localization Report 실행시의 ORA-20000, ORA-06512 Error Message 를 해결한다.
Problem Description
Kr Tax Localization의 Reports가 Error를 발생하고, View Log를 통해 확인한 Message가 다음과 같을 경우
ORA-20000: APP-00001: Unable to find message:
AR_NO_ROW_IN_SYSTEM_PARAMETERS
ORA-06512: "APPS.ARP_STANDARD", 줄 999에서
ORA-06512: "APPS.ARP_STANDARD", 줄 2246에서
ORA-06512: "APPS.ARP_UTIL", 줄 29에서
ORA-06512: "APPS.ARP_UTIL_TAX", 줄 111에서
ORA-06512: "APPS.ARP_TAX_EXTRACT", 줄 6178에서
ORA-06512: 줄 1에서
Workaround
Solution Description
1) fnd_client_info.set_org_context(<org_id>);
or
2) v_org_id varchar2(10);
v_org_id := fnd_profile.value('ORG_ID');
fnd_client_info.set_org_context(v_org_id);
.rdf 의 경우 : Before Report Trigger 에 추가
.sql (Package Body, Procedure) 의 경우 : 각 Begin 절 이후
Reference Documents
------------------- -
Exclude ORA-06512 from error message
Hi all,
Lets have a simple example:
declare
EXP_FRZN_VER EXCEPTION;
begin
if (1=1) then
raise EXP_FRZN_VER;
end if;
exception
when EXP_FRZN_VER then
raise_application_error (-20303, 'Frozen version cannot be modified!');
when OTHERS then
dbms_output.put_line('TEST');
end;
I want to send error message to my web application through raise_application_error.
Error message looks like:
Error report:
ORA-20303: Frozen version cannot be modified!
ORA-06512: at line 12
Question: Is there a way to exclude string "ORA-06512: at line 12" from that message? I need to handle it on DB side...
Thanks
FinecYour calling code shouldn't get that line as you haven't passed back the error stack in your raise_application_error...
e.g.
SQL> ed
Wrote file afiedt.buf
1 declare
2 EXP_FRZN_VER EXCEPTION;
3 v_err varchar2(200);
4 procedure x is
5 begin
6 if (1=1) then
7 raise EXP_FRZN_VER;
8 end if;
9 exception
10 when EXP_FRZN_VER then
11 raise_application_error (-20303, 'Frozen version cannot be modified!');
12 end;
13 begin
14 x;
15 exception
16 when others then
17 v_err := SQLERRM;
18 dbms_output.put_line('Error Message received is actually: '||v_err);
19* end;
SQL> /
Error Message received is actually: ORA-20303: Frozen version cannot be modified!
PL/SQL procedure successfully completed.If you did pass back the whole stack, then you'd get the whole thing...
SQL> ed
Wrote file afiedt.buf
1 declare
2 EXP_FRZN_VER EXCEPTION;
3 v_err varchar2(200);
4 procedure x is
5 begin
6 if (1=1) then
7 raise EXP_FRZN_VER;
8 end if;
9 exception
10 when EXP_FRZN_VER then
11 raise_application_error (-20303, 'Frozen version cannot be modified!', true); -- pass back whole error stack
12 end;
13 begin
14 x;
15 exception
16 when others then
17 v_err := SQLERRM;
18 dbms_output.put_line('Error Message received is actually: '||v_err);
19* end;
SQL> /
Error Message received is actually: ORA-20303: Frozen version cannot be modified!
ORA-06512: at line 11
ORA-06510: PL/SQL: unhandled user-defined exception
PL/SQL procedure successfully completed. -
database version 11.2.0.4
rac two node
CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
(DESCRIPTION)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('lexer global_lexer language column LANGCODE')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366Like the error message says, you don't have a global_lexer. So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters. Please see the demonstration below, including reproduction of the error and solution.
SCOTT@orcl12c> -- reproduction of problem:
SCOTT@orcl12c> CREATE TABLE actci
2 (description VARCHAR2(60),
3 langcode VARCHAR2(30))
4 /
Table created.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
SCOTT@orcl12c> -- solution:
SCOTT@orcl12c> DROP INDEX actci_ndx3
2 /
Index dropped.
SCOTT@orcl12c> BEGIN
2 CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
3 CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
4 CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
5 END;
6 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
Index created. -
I recieved this error message, when running a procedure:
ORA-02068: following server error from DBLINK
ORA-03114: not connected to ORACLE
ORA-06512: at line 13
DBLINK is a database link to a remote database. Is it as simple as the remote database being offline..or is a different problem possible?
Thanks,
DuncanIs this an Oracle to Oracle connection? Or is the addressed database a non-Oracle database? The combination ora-02068 and ora-03114 is typical for Heterogeneous Connectivity and/or Gateway Connectivity.
The basic problem is ora-03114 (You are not connected), it does not necessarily mean, database is down. -
Depoly error ORA-29532, ORA-06512
Hi all,
When I deploying tables and mappings, I get the following error message:
ORA-29532: Java call terminated by uncaught Java exception: oracle.jdbc.driver.OracleSQLException: ORA-28239: no key provided
ORA-06512: at "SYS.DBMS_OBFUSCATION_TOOLKIT_FFI", line 40
ORA-06512: at "SYS.DBMS_OBFUSCATION_TOOLKIT", line 153
ORA-06512: at "OWBRTR2.WB_RT_SERVICE_CONTROL", line 286
ORA-06512: at "OWBRTR2.WB_RT_SERVICE_CONTROL", line 314
ORA-06512: at line 1
We are in RAC environment. I did some search for similar error messages, and upon the previous replies, I copy rtrepos.properties to all the cluster nodes. Actually, I get this error message after the first couple of tables deployments, which are all going correctly. It seems this error comes out randomly.
any idea of how to fix it?
thanks so much.Hi,
you told that error appears randomly.
I guess that this problem occurs when you connect from OWB to non-primary RAC node (primary/first in sense of OWB repository - it is node where OWB repos.assistant started for initial creating of repository).
So when you guarantee connecting from OWB to primary node you maybe resolve problem.
Minimal db instance configuration is disabling load balancing at server and client side.
Regards,
Oleg -
We are observing below mentioned error message at application login process. Could you please let me know how to debug this issue.
ORA-20876: Message 20876 not found; Error in reading message file for product=RDBMS, facility=ORA
Environment: Oracle 11g R1
APEX: 4.0This is debug stack ( start from bottom to top)
30-JUL-12 11.39.19.384362000 PM +00:00 End Page Rendering
30-JUL-12 11.39.19.383095000 PM +00:00 Rendering form close tag and page checksum
30-JUL-12 11.39.19.382177000 PM +00:00 Processes - point: BEFORE_ERROR_FOOTER
30-JUL-12 11.39.19.380627000 PM +00:00 Processes - point: AFTER_ERROR_HEADER
30-JUL-12 11.39.19.378330000 PM +00:00 Rendering form open tag and internal values
30-JUL-12 11.39.19.376442000 PM +00:00 ......Performing rollback
30-JUL-12 11.39.19.375870000 PM +00:00 ...Show Error on Error Page
30-JUL-12 11.39.19.375156000 PM +00:00 "......error_backtrace: ORA-06512: Message 6512 not found; product=RDBMS; facility=ORA
; arguments: [""APEX_040100.WWV_FLOW"", ] [4751]
ORA-06512: Message 6512 not found; product=RDBMS; facility=ORA
; arguments: [""APEX_040100.WWV_FLOW_UTILITIES"", ] [5116]
ORA-06512: Message 6512 not found; product=RDBMS; facility=ORA
; arguments: [""APEX_040100.WWV_FLOW"", ] [6354]"
30-JUL-12 11.39.19.374512000 PM +00:00 ......ora_sqlerrm: ORA-20876: Message 20876 not found; Error in reading message file for product=RDBMS, facility=ORA
30-JUL-12 11.39.19.373908000 PM +00:00 ......ora_sqlcode: -20876
30-JUL-12 11.39.19.373263000 PM +00:00 ......apex_error_code: APEX.UNHANDLED_ERROR
30-JUL-12 11.39.19.372648000 PM +00:00 ......is_internal_error: true
30-JUL-12 11.39.19.371880000 PM +00:00 ......display_location: ON_ERROR_PAGE
30-JUL-12 11.39.19.371260000 PM +00:00 ......additional_info: ORA-20876: Message 20876 not found; Error in reading message file for product=RDBMS, facility=ORA
30-JUL-12 11.39.19.370625000 PM +00:00 ......message: Error processing request.
30-JUL-12 11.39.19.369972000 PM +00:00 ...Error data:
30-JUL-12 11.39.19.369255000 PM +00:00 Add error onto error stack
30-JUL-12 11.39.19.368062000 PM +00:00 Stop APEX Engine detected
30-JUL-12 11.39.19.367313000 PM +00:00 Redirecting to f?p=101:LOGIN:2459254576382801
30-JUL-12 11.39.19.364679000 PM +00:00 ...New Instance Detected -
30-JUL-12 11.39.19.363962000 PM +00:00 Session created: 2459254576382801 user:nobody
30-JUL-12 11.39.19.362450000 PM +00:00 ...Creating new session, session ID=""
30-JUL-12 11.39.19.361899000 PM +00:00 ... sentry+verification failure
30-JUL-12 11.39.19.360534000 PM +00:00 Authentication check: Application Express Authentication (NATIVE_APEX_ACCOUNTS)
30-JUL-12 11.39.19.359884000 PM +00:00 ...fetched 0 session state items
30-JUL-12 11.39.19.359228000 PM +00:00 fetch items
30-JUL-12 11.39.19.358475000 PM +00:00 ...fetch session state from database
30-JUL-12 11.39.19.356737000 PM +00:00 Application 101, Authentication: PLUGIN, Page Template: 2716132140270164
30-JUL-12 11.39.19.355829000 PM +00:00 NLS: Language=en-us
30-JUL-12 11.39.19.355182000 PM +00:00 ...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
30-JUL-12 11.39.19.354507000 PM +00:00 ...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"
30-JUL-12 11.39.19.353813000 PM +00:00 ...NLS: Set g_nls_date_format="DD-MON-YYYY HH24:MI"
30-JUL-12 11.39.19.353025000 PM +00:00 Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY HH24:MI
30-JUL-12 11.39.19.352277000 PM +00:00 ...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
30-JUL-12 11.39.19.351587000 PM +00:00 ...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"
30-JUL-12 11.39.19.350890000 PM +00:00 ...NLS: Set g_nls_date_format="DD-MON-RR"
30-JUL-12 11.39.19.350198000 PM +00:00 ...NLS: Set NLS Group separator=","
30-JUL-12 11.39.19.349601000 PM +00:00 ...NLS: Set Decimal separator="."
30-JUL-12 11.39.19.348938000 PM +00:00 NLS: CSV charset=WE8MSWIN1252
30-JUL-12 11.39.19.348083000 PM +00:00 alter session set nls_territory="AMERICA"
30-JUL-12 11.39.19.347348000 PM +00:00 alter session set nls_language="AMERICAN"
30-JUL-12 11.39.19.344781000 PM +00:00 S H O W: application="101" page="1" workspace="" request="" session="380911071284401" -
Error -- ORA-20101: ORA-06512: at "DEV_PORTAL.WWPOB_API_PA
Hi!
When I click on a tab in Oracle Portal page i got the following error:
- ORA-01403: no data found ORA-20101: ORA-06512: at "DEV_PORTAL.WWPOB_API_PAGE", line 5247 ORA-01403: no data found ORA-01403: no data found.
In WLS_PORTAL.log fileL do not appear any error message but in the WLS_PORTAL.out i get:
- ERROR: Repository Gateway error: Database Error: ORA=20001 ORA-20001: Unable to obtain session information from the cookie.
ORA-06512: at "DEV_PORTAL.WPG_SESSION", line 174
ORA-06512: at line 32
I Have installed the 11g version in a Windows Server 2008.
Anybody knows how can i solve it?
Regards.
Carlos G.Hi Carlos
Looks like you are using Oracle Portal and NOT Oracle Weblogic Portal (earlier bea weblogic portal 10.3). Since this is Weblogic Portal Forum, may be you can try posting your issue in the Oracle Portal Forums.
Ravi Jegga -
[Jena RDF] Error message ORA-13199
Hello all, ,
I use D2Rq for transformation of SGBD(SQLserveur at Oracle a semantic graph c12 through, used file .ttl)
My error message is the following result:
java.sql.SQLException: ORA-13199: During LBV: [04-NOV-14 03.07.15.421063000 PM -05:00]
ORA-13199: Element Parse Error: Invalid numeric value [debug info: GCVN-numeric: 114.4000015258789E0] (value: "114.4000015258789E0"^^<http://www.w3.org/2001/XMLSchema#decimal>) [
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF", line 86
ORA-06512: at "MDSYS.SDO_RDF_INTERNAL", line 1307
ORA-06512: at line 1
ORA-06512: at "MDSYS.SDO_RDF_INTERNAL", line 2826
I am looking for a solution with Jena API? Or a way to hide exhibitors decimal (E0) !!
Any suggestions would be welcome
Ce message a été modifié par : 2773504Hello everyone,
I use d2rq to the transformation of relational and RDF file with the Association d2rq attached.
The result is that when I recovered figures initially BigDecimale (in the relational database) I transform them ^^Double or ^^Decimal I have the scientific concept that is used with an E?
Message: ORA-13199: Element Parse Error: Invalid numeric value [debug info: GCVN-numeric: 114.4000015258789E0] (value: "114.4000015258789E0"^^<http://www.w3.org/2001/XMLSchema#decimal>)
How it is possible to resolve this behavior?
Thins. -
Sql@loader-704 and ORA-12154: error messages when trying to load data with SQL Loader
I have a data base with two tables that is used by Apex 4.2. One table has 800,000 records . The other has 7 million records
The client recently upgraded from Apex 3.2 to Apex 4.2 . We exported/imported the data to the new location with no problems
The source of the data is an old mainframe system; I needed to make changes to the source data and then load the tables.
The first time I loaded the data i did it from a command line with SQL loader
Now when I try to load the data I get this message:
sql@loader-704 Internal error: ulconnect OCISERVERATTACH
ORA-12154: tns:could not resolve the connect identifier specified
I've searched for postings on these error message and they all seem to say that SQL Ldr can't find my TNSNAMES file.
I am able to connect and load data with SQL Developer; so SQL developer is able to find the TNSNAMES file
However SQL Developer will not let me load a file this big
I have also tried to load the file within Apex (SQL Workshop/ Utilities) but again, the file is too big.
So it seems like SQL Loader is the only option
I did find one post online that said to set an environment variable with the path to the TNSNAMES file, but that didn't work..
Not sure what else to try or where to look
thanksHi,
You must have more than one tnsnames file or multiple installations of oracle. What i suggest you do (as I'm sure will be mentioned in ed's link that you were already pointed at) is the following (* i assume you are on windows?)
open a command prompt
set TNS_ADMIN=PATH_TO_DIRECTOT_THAT_CONTAINS_CORRECT_TNSNAMES_FILE (i.e. something like set TNS_ADMIN=c:\oracle\network\admin)
This will tell oracle use the config files you find here and no others
then try sqlldr user/pass@db (in the same dos window)
see if that connects and let us know.
Cheers,
Harry
http://dbaharrison.blogspot.com
Maybe you are looking for
-
How can I move pictures from my media card from my SLR camera to my IPAD
How can I move pictures from my media card from my SLR camera to my IPAD2 without my iMac?
-
IChart_ Y Co-ordinate for all Tags in Legend
Hello All, I am using a ichart to display the trends of various parameters.(industrual parameters like motor temperature, amps, speed etc.) I can see the X and Y value of the mouse or a when a single point is selected; I can see the X, Y co-ordinates
-
I updated today to v. 18, and while my menus do pull down (for both the firefox one of the left and the bookmark one on the right) and the links work, the... image file, I guess, is very glitchy. I only know what I'm clicking on because I know vaguel
-
I am having problems with java
Hi I am using a banking website for online management. I use Safari. Java is required for this applet to run. When I login, the message comes Timeout! And the applet shut offs. I am attaching the message that comes when I want to login. Any solution?
-
Problems with sysex midi dumps (Jomox Xbase 888 Logic Pro 8)
Hello, I am trying to record sysex midi dumps FROM (Jomox Xbase888) TO Logic Pro 8 but I can't get the two devices to communicate. Can somebody help out? Many thanks. Seb