'ora-' error messages

We're using 6i, and I'm trying to find the pl/sql error messages, such as ORA-04098. I can never seem to find these and searching on them is no help. Can you point me in the right direction?
Thanks,
Tom

Oracle's messages are listed in the 'Oracle9i Database Error Messages' manual. Also available at:
http://download-west.oracle.com/docs/cd/B10501_01/nav/docindex.htm

Similar Messages

Site with ORA error message

In the passed I used an Oracle site with a description of all the ORA error messages. Now I can not find this site anymore. Does anyone know the link to this site?
kind regards,

If you are searching for a specific error message you might try
http://otn.oracle.com/pls/db92/db92.error_search?remark=homepage&prefill=ORA-

Cannot find tnsnames.ora error message

We are using oracle 10.2.0.1 via Toad. I get a cannot find tnsnames.ora file error message and see only a tnsnames.ora file in the sample file under the c:\ORACLE\product\10.2.0.1\NETWORK\ADMIN\ directory.
Do I need to create this file, and if so how do I do this?
Thanks in advance for your help
regards,
user12943453

Do I need to use the TNSNames Editor? No need for tnsnames.ora or SQL*net to access local DB
Can I just use direct connect and the sqlnet editor?YES!

ORA- Error messages in Oracle Alert File

Hello Gurus,
In a SAP - BW system installed on Oracle 8.1.7.4, there were some oracle errors entries as follows;
Fri Nov 3 02:13:32 2006
Errors in file /oracle/<SID>/saptrace/background/p001_14866_<sid>.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-00052: maximum number of enqueue resources (8000) exceeded
ORA-00052: maximum number of enqueue resources (8000) exceeded
How fatal is this error? how to make sure this doesnt happen again and anyone can share the SQL command to see how many ENQUEUE_RESOURCES are being used?
If i have to increase the enqueue, where and how to do it?
Thanks in advance for your help.

Hi "Basis Learner",
1. Oracle 8.1.7 is out of date! It's not maintained anymore.
2. You don't need SQL to tell how many enqueue resources have been used here. The message is clear: 8000. The current maximum. Not a single one more and no less.
3. Well how many more you'll need is hard to tell. But oviously more. Try with plus 50% -> 12000.
Since the process that died here had been a paralle query server process, it may also be the case, that you've configured too many parallel servers. As they run at the same time (parallel) they'll make use of enqueues at the very same time...
4. Of course there are notes:
398927 - ORA error as the dimensions of the parameters are too small
745639 - FAQ: Oracle enqueues
632427 - Oracle 8.1.7* database parameterization for BW
Hope that helps.
KR Lars

ORA Error Message on Tablespace

just tried to run the following program and was given an error message. Please let me know what this message means.
Wrote file afiedt.buf
1 select pers.person_id,
2 pers.profile_person_id profile_id,
3 yrs.deg_sought_by_fellow_code x123,
4 yrs.fellow_deg_1st_code x124,
5 yrs.fellow_deg_2nd_code x125,
6 pers.ssn
7 from persons pers,
8 project_years_t yrs,
9 project_versions_t vers,
10 person_degs_t degs
11 where (pers.PERSON_ID = degs.person_id
12 and vers.APPL_ID = yrs.APPL_ID)
13 and pers.person_TYPE_CODE = 'PI'
14 AND yrs.admin_phs_org_code = 'AA'
15 and degs.deg_seq_num in ('01', '02', '03')
16 and yrs.activity_code IN ('R01', 'F32')
17 AND vers.fy = 1998
18 and vers.LATEST_ENCUMBRANCE_DATE is not null
19 and yrs.SUBPROJECT_ID is null
20* and vers.calculated_TOTAL_cost_AMT > 0
SQL> /
from persons pers,
ERROR at line 7:
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP_02
null

Your querry asks for joins and at times optimizer choose sort merge joins as efficient way of executing querry. Now sort merge joins are done using SORT_AREA_SIZE but if that is not enough then disk writes take place. In this case temp tablespace is used and this message is displayed when that tablespace runs out of space.

ORA- error messages defined

I am hoping to find a single source for the description of all error messages. Does such a document exists and where might I find it?
Thanks.

Oracle's messages are listed in the 'Oracle9i Database Error Messages' manual. Also available at:
http://download-west.oracle.com/docs/cd/B10501_01/nav/docindex.htm

Custumize error message

Hi
How can I customize ORA error messages?
For example I have a master-detail page generated with JHeadstart 10.1.2.
When I delete a master with details I get this error message: ORA-02292: integrity constraint (APL.PWL_PWJ_FK) violated - child record found
How can I get my own error message?
I Have tryed to add "PWL_PWJ_FK=My error message" in the ApplicationResources.properties file, but nothing happens
Thanks in advance
Olavur

Sandra,
Here is the reference in the struts-config:
<message-resources parameter="view.ApplicationResources,fo.samteld.webpayroll.view.ApplicationResources" factory="oracle.jheadstart.view.strutsadf.JhsMessageResourcesFactory" null="false"/>
There are two ApplicationResources.properties files.
Here is the first one:
...src\view\ApplicationResources,fo\samteld\webpayroll\view\ApplicationResources.properties
The code in this file is here:
errorpage.message=Error Message:
errorpage.title=Error Page
error.Validate3=Â Â Â Â Â Â Â Â Â {0}
error.Validate2=Â Â Â Â Â Â {0}
error.Validate1=Â Â Â {0}
errorpage.apperror=Application Error
error.Validate0={0}
globalerror.jboException=Application Error
PWL_PWJ_FK_CASDEL=My error message 1
The second one is here:
...src\view\ApplicationResources.properties
and the code:
errors.prefix=<li>
errors.suffix=</li>
errors.footer=</ul><hr>
errors.header=<h3><font color="red">Validation Error</font></h3>You must correct the following error(s) before proceeding:<ul>
PWL_PWJ_FK_CASDEL=My error message 2
The text variable in handle 3 gets the value "My error message 2" when i debug
Should I add a reference to the second ApplicationProperties.ressources in the struts-config? How?
Olavur

Receiving Alerts on ORA- error in Alert Log File

Hi,
I am using 10.2.0.5 OEM grid control and same versioned agent on my database servers. I have configured the alert email notification if there is any ORA- error message in my alert log file. The metric i selcted for this is "Generic Alert Log Error Status". In notification email, i see only the message that there is generic error message in the alert log file. Is there any way to set this notification so that i receive the exact ORA- error message in my alert notification email if there is any kind of ORA- error found in my alert log file?
Thanks
Salman

Please look into the Metalink Note: 458605.1
Subject: Receiving "Clear" Notifications Unexpectedly for 'Generic Alert Log Error Status' Metric

Recurring text error message

Hi, just got a iphone 4 last week and starting to discover all the different features. I have a text problem starting today I can't seem to resolve. My text messaging has been working fine I have to say. Then this morning I sent a text to an international phone number that turn out to be wrong number. First nothing happened. Then 5 hours later I received a reply telling me the phone number is incorrect. Ok, fine. But wait, after that I keep receiving the same exact error message, about every five minute. I went I deleted the original text message by going into edit and removing the whole post. Not so lucky, I still keep receiving the error sms. I am afraid this is going to go on and on, all night and day. Does anyone knows what I can do to make it stop?

Well there is no table available in the oracle to see such. However, for UNIX flavour in the rdbms directory (I guess) you have a flat file called oraus whch contains all ora errors messages. For NT(WINDOWS) system, you need to write a procesure using error code I believe. I had seen this in the asktom site. Search, you may get it.
Jaffar

Sql@loader-704 and ORA-12154: error messages when trying to load data with SQL Loader

I have a data base with two tables that is used by Apex 4.2. One table has 800,000 records . The other has 7 million records
The client recently upgraded from Apex 3.2 to Apex 4.2 . We exported/imported the data to the new location with no problems
The source of the data is an old mainframe system; I needed to make changes to the source data and then load the tables.
The first time I loaded the data i did it from a command line with SQL loader
Now when I try to load the data I get this message:
sql@loader-704 Internal error: ulconnect OCISERVERATTACH
ORA-12154: tns:could not resolve the connect identifier specified
I've searched for postings on these error message and they all seem to say that SQL Ldr can't find my TNSNAMES file.
I am able to connect and load data with SQL Developer; so SQL developer is able to find the TNSNAMES file
However SQL Developer will not let me load a file this big
I have also tried to load the file within Apex (SQL Workshop/ Utilities) but again, the file is too big.
So it seems like SQL Loader is the only option
I did find one post online that said to set an environment variable with the path to the TNSNAMES file, but that didn't work..
Not sure what else to try or where to look
thanks

Hi,
You must have more than one tnsnames file or multiple installations of oracle. What i suggest you do (as I'm sure will be mentioned in ed's link that you were already pointed at) is the following (* i assume you are on windows?)
open a command prompt
set TNS_ADMIN=PATH_TO_DIRECTOT_THAT_CONTAINS_CORRECT_TNSNAMES_FILE (i.e. something like set TNS_ADMIN=c:\oracle\network\admin)
This will tell oracle use the config files you find here and no others
then try sqlldr user/pass@db (in the same dos window)
see if that connects and let us know.
Cheers,
Harry
http://dbaharrison.blogspot.com

Error Message - ORA-01722 Invalid Number

Hello:
I have the following situation. When I create an organization, a record is inserted into the following table, AGREEMENTS, and populates four fields.
I have an update form which selects the organization from the AGREEMENTS table so the user can populate the rest of the table. In addition, on this form, there is a drop-down box which allows the user to select the name of a legal document along with the version of the document in which the user needs to select. This select list is created via an LOV joining three tables. The item name for this select list is :P6_DOCUMENT.
The code for the LOV is:
SELECT S.DOC_NAME||' - '|| O.VERSION_NO AS DOC, O.ORG_DOC_CURR_KEY
FROM SUPPORTING_DOCS S,
     ORG_DOC_CURR_VER O,
     AGREEMENTS H
WHERE
    S.DOC_TYPE = 'HISA'
AND S.SUPPORTING_DOC_KEY = O.SUPPORTING_DOC_KEY
AND H.ORG_KEY_LE = O.ORG_KEY
AND O.ORG_KEY=:P6_ORG_KEY_LEWhen the user completes the form, the SUBMIT process is a PL/SQL block consisting of an UPDATE statement to update the AGREEMENTS table based on the selected organization and an INSERT statement to insert a record into the AGREEMENTS_DOC table to store the value stored in :P7_DOCUMENT.
Ok, now here is where my problem starts.
When I first bring up the form and I select the organization I want to update, I click the Search button to find the organization and I receive the following error message: ORA-01722 Invalid Number.
At this point all I'm doing is a basic search. There is no insert/update or anything going on. I'm not understanding why I would be receiving this error message.
The search is based on the database column ORG_KEY_LE whose datatype is NUMBER.
In my application, the item assigned to ORG_KEY_LE is P6_ORG_KEY_LE.
I have a PL/SQL block process created (On Load-Before Header) in the Page Rendering area of my page definition. The PL/SQL code that is written is:
BEGIN
IF :P6_SEARCH_ORG != '0' THEN
:P6_ORG_KEY_LE := :P6_SEARCH_ORG;
END IF;
END;I then have an Item created, :P6_SEARCH_ORG, which is a Select List. In the LOV portion of the page for this item, I have the following:
select ORG_KEY_LE display_value, ORG_KEY_LE return_value
from AGREEMENTS
order by 1The reason for using this table is because this table contains the newly created organization which needs to be updated with the remaining columns of data.
I then have a Search button in the Button area which has the following settings:
Button Position: Region Template Position #CHANGE#.
Condition Type: Value of Item in Express 1 is NULL.
Expression 1: :P6_ORG_KEY_LE.
To troubleshoot this problem, I created two pages, one page to do the UPDATE and the second page to do the INSERT.
The SEARCH functionality in both pages are identical.
When I run my UPDATE page, which only involves updating the missing fields, the process works. I have my search box, I'm able to search for the organization, make my updates, and I'm good.
When I run my INSERT page, which involves inserting the record with the assigned document, I receive the error message after I click the SEARCH button. In order to INSERT the record into this table, I first need to SELECT the organization that was UPDATED in the AGREEMENTS table (using the UPDATE page described in above paragraph). When I select the organization, the user can then assign the appropriate legal document to the organization and insert the record into the AGREEMENTS_DOC table.
Can someone help me with this error message? I'm not sure why I am able to perform my SEARCH on a page with the UPDATE statement, not able to perform the SEARCH on the page with my INSERT statement, and not be able to perform the SEARCH on the page that combines the UPDATE and INSERT statements.
I did some more troubleshooting and I do believe my SUBMIT process which contains the INSERT statement is the issue. I created a fourth page which doesn't have a SUBMIT process. I brought up the form, searched for my organization and the information for that organization appeared. The problem is definately with my UPDATE/INSERT process.
The PL/SQL block for the Submit process is the following:
BEGIN
update
    MDD.HISA_AGREEMENTS
     set
       LAST_UPDATED_BY=V('APP_USER'),
       APPROVER_SALUTATION=:P6_APPROVER_SALUTATION,
       APPROVER_FIRST_NAME=:P6_APPROVER_FIRST_NAME,
       APPROVER_MIDDLE_INITIAL=:P6_APPROVER_MIDDLE_INITIAL,
       APPROVER_LAST_NAME=:P6_APPROVER_LAST_NAME,
       APPROVER_NAME_SUFFIX=:P6_APPROVER_NAME_SUFFIX,
       APPROVER_EMAIL_ADDR=:P6_APPROVER_EMAIL_ADDR,
       SPONSOR_EMAIL_ADDR=:P6_SPONSOR_EMAIL_ADDR,
       APPROVER_TITLE=:P6_APPROVER_TITLE
where
      ORG_KEY_LE=:P6_ORG_KEY_LE
INSERT INTO
    HISA_AGREEMENT_DOCS
      (HISA_AGREEMENT_DOC_KEY,
       ORG_KEY_LE,
       APPLICATION_KEY,
       STATUS,
       STATUS_DATE,
       CREATED_BY,
       ORG_DOC_CURR_KEY)
VALUES
      (HISA_AGREEMENT_DOC_KEY_SEQ.NEXTVAL,
       :P6_ORG_KEY_LE,
       :P6_APPLICATION_KEY,
       'C',
       SYSDATE,
       V('APP_USER'),
       :P6_DOCUMENT)
END;There is something wrong with the above statement and I do not understand what it could be. Can someone help?
Thanks for the help.

Hi,
I believe you are on to something.
The select list for item :P6_DOCUMENT appears when I first bring up the form. When I select my organization and receive the error message, I clicked on the Session in the Developer's bar. The value in item/field :P6_DOCUMENT shows %null%.
This is the path in which my user would like to accomplish her task:
1. Select an organization
2. Display the information for that organization from the AGREEMENTS table
3. Enter the data for the remaining fields in the AGREEMENTS table
4. Select the document (:P6_DOCUMENT) from the drop-down.
5. Click Submit
6. Update the AGREEMENTS table with data entered in #3.
7. Insert a record into the AGREEMENTS_DOC table with the selection from #4.
Somehow I need the :P6_DOCUMENT field not to show the %null% during the SEARCH functionality. I think that is causing the problem.
How do I fix this?

Error Message (ORA-01722: invalid number) when add amount into Number field

I am using VB.net, trying to insert data into a field called amt with Data Type 'Number'.
my vb.net code is as follows
Dim oradb As String = DatabaseConnectionString
Dim AmountValue As Decimal = 123.45
'get the connection
Dim conn As New OracleConnection(oradb)
'open the database connection
conn.Open()
'create oracle command
Dim cmd As New OracleCommand("INSERT INTO TBL1 (AMT) VALUES (:AMT)", conn)
cmd.CommandType = CommandType.Text
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
'Execute
cmd.ExecuteNonQuery()
I got error message "ORA-01722: invalid number". Please help

Did you also change the below line before inserting Integer 123:
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
to
cmd.Parameters.Add(":AMT", OracleDbType.Integer, AmountValue, ParameterDirection.Input)

'ORA-01722: Invalid number' error message in BeX

Hi Gurus,
We have a new report built on top of a DSO. When I run this report, I get the message 'ORA-01722: invalid number'. On furthur testing, I found that when I move two objects 'Date Changed' & 'Time Changed' [both are 'Z' objects we created] from the 'Rows' to 'Free Characteristics', the report runs as expected. So the issue seems that it is with these two objects. One of them is of type 'DATS' & the other of type 'TIMS'. These two are mapped to respective 'Date' & 'Time' fields in SAP R3.
SID's exists in the Master Data tables for both these objects. The data for both the fields contains the normal 'Date' & 'Time' values.Running the query using RSRT shows the same error message. The RSRV check on this report says that 'Query execution not possible as the variables contain invalid values'.
I have seen a couple of other posts in SDN with similar issues but none of them have a solution identified so far. Just wanted to check if anyone who has experienced this issue have been successfully able to resolve it?
Thanks
Arvind

Hi Ravi,
Thanks for your prompt reply. Yes, the 'Date' & 'Time' objects have 0DATE & 0TIME as reference objects.
I couldn't find any invalid vallues for these date and time fields. If invalid values were present, wouldn't the DSO activation have failed?
Thanks
Arvind.

ORA-12705 Error Message while trying to connect to the DB

A colleague of mine has been trying to connect to the DB through PL/SQL Developer. The error message returned is :
ORA-12705: invalid or unknown NLS parameter value specified
Checked the registry for NLS_LANG which is set to NA. I did that because the ORA message references the NLS_LANG parameter. However, I doubt that is the problem. Went about to create a new TNS Name entry through Oracle NET Manager and get the same Error Message while performing the TEST function.
Any clues ? I am clueless at this point.

This can occur with any NLS_ environment variable of registry value.
Your assertion ' the ORA message references the NLS_LANG parameter' is incorrect.
You can set NLS_TERRITORY, NLS_DATE_FORMAT etc, etc, etc.
The order of precedence is environment variable, registry, Oracle provided default.
To find out what is going on set every NLS related environment variable to the empty string.
In sqlplus
select * from v$nls_valid_values
will show you what can be set,
This error will also occur when you installed the software with English as the only language.
SQL developer doesn't use tnsnames.ora
The new tnsname entry has nothing to do with it.
You have an incorrect environment variable or registry value somewhere
(in HKLM\software\oracle)
Sybrand Bakker
Senior Oracle DBA

Error message: ORA-01422:

Hi All
while running a package I received an error message:
ERROR at line 1:
ORA-01422: exact fetch returns more than requested number of rows
I wrote an exception for too_many_rows , which took care of the error but my question is does the exception condition get logged anywhere?
Thanks

if you want to log messages to a table within your code, but not in an exception handler, then consider an autonomous transaction;
something like this:
SQL> create table xyz (x varchar2(500))
2 /
Table created.
SQL>
SQL> set serveroutput on
SQL> declare
2
3    p_Value number := 0;
4
5    procedure Log_Msg (p_Msg in varchar2) as
6      pragma autonomous_transaction;
7      begin
8        insert into xyz (x) values (p_Msg);
9        commit;
10        exception
11          when others then
12            rollback; -- always ensure a rollback or commit occurs with an autonomous proc
13    end;
14
15 begin
16    p_Value := 10;
17    Log_Msg ('Value is now, ' || p_Value);
18    p_Value := p_Value*10;
19    Log_Msg ('Value ten times more, ' || p_Value);
20
21
22    dbms_output.put_line('Done');
23
24    exception
25      when others then
26        dbms_output.put_line('Error ' || sqlerrm);
27 end;
28 /
Done
PL/SQL procedure successfully completed.
SQL>
SQL> select * from xyz;
X
Value is now, 10
Value ten times more, 100

'ora-' error messages

Similar Messages

Maybe you are looking for