Error: modelled objects types cannot be generated

While generating my program i am getting this error msg "modelled objects types cannot be generated"
What are the way to remove this problem.

Hi,
First you have to make it implemented then only you can release.
Reward points if helpful.
Regards
CS

Similar Messages

IDOC - process code with error "Application Object Type not planned'

Hi all,
I am doing an inbound idoc.... in TCODE we42, i trying to put function module which i created, attached to the process code.
However, when i put my function module ZIDOC_INBOUND to the process code... it comes out error, 'Application Object Type not planned.'
Why is this so?
Please advice...
Thanks and regards...
William Wilstroth

HI all,
I had solved this problem. I should have gone to we57 to tie the function module.
thanks.
William Wilstroth

Error "Associated object BUS20001 cannot be opened"

Dear Experts,
I have workflow task group on home page of web client ( i.e. WEB UI )
Whenever any customer fails a credit check, a workflow is triggered and a task is shown under this workflow task area on home page.
On clicking the task, it opened the workflow overview page (component GSWIDET , view DetVS) where you see the workflow details view and other assignment blocks. There is execute button available on the toolbar. When i click the execute button, it should ideallly open the associated object (which ia sales order in my case ) but it gives me error as "Associated object BUS20001 cannot be opened;". This error is displayed in std. error display area on webclient.
Also under Associated Objects Assignemnt block on this overview page, it corretly displays the associated Sales Order which triggered the work flow, but when i try to open it by clicking on the sales order number (hyperlinked), it does not open the same rather i get the same error as "Associated object BUS20001 cannot be opened;"
When i checked in backend GUI ( transaction SBWP >>Inbox ) it works fine.
While debugging i found that in Function Module "CRM_CT_CUST_IBWF_GET_OBJ_CUST" , it find that for object type BUS2001 , no customization flag is set . and hence it gives the above error.
Can anyone please guide me as how to resolve this error ? What is the way to define Object customization ?
Kindly help
Immidiate help is higly appreiciated .
Thanks A lot.
Regards,
Suchita
Edited by: suchita P on Sep 2, 2008 5:50 PM

Solved after implementing SAP NOTE 1250869

BPM (IP) Error: "No object type found for this message [...]"

For your info.
I have searched SDN today for a solution to an error message found in XI message monitor (trx SXI_MONITOR) when sending a message to BPM:
<b>No object type found for this message; check the activation of the corresponding process</b>
Well, I found a lot of threads, but with no good answer for me.
So, here's my self-solution: I was just missing the Interface Determination (really don't know why) bringing from Outbound to Abstract message interface. So XI message was definitely correct.

Hi,
Make sure that the first receive step in your integratiopn process uses the abstract interface that u defin in the interface determination.
Also check if you have used all the objects that you have created. Some times 'No object type found' error happens if your BPM is not activated.
Also check the activation log and see if there are any errors. Refrech the cache in SXI_CACHE. Check if the return code is 0.
Hope this helps.
Regards.
Praveen

Transport error - Data type cannot be changed

I have an infoobject whose data type was changed from NUMC2 to CHAR2. Everything is fine in Dev system. However, when I transport to Q, I get method execution with error message "Data type cannot be changed".
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
InfoO. YHRSGB01 is used in compounding of YHRAUS01: Data type cannot be changed
Characteristic YHRSGB01: The method for SID entry has changed
Characteristic YHRSGB01: The data type has changed from NUMC to CHAR
SID Table /BIC/SYHRSGB01 contains data: Characteristic YHRSGB01 cannot be activated
Text Table /BIC/TYHRSGB01 contains data: Characteristic YHRSGB01 cannot be activated
InfoO. YHRSGB02 is used in compounding of YHRAUS02: Data type cannot be changed
Any ideas please?
-Sonny

Hi,
1. It will be better if you delete all the data in Development & Quality system for this Objects - Re Activate -collect objects and then transport .
2. InfoO. YHRSGB01 is used in compounding of YHRAUS01
    InfoO. YHRSGB02 is used in compounding of YHRAUS02
    this two objects are compounded
   check weather this Componded Info objects are available in   Quality System, if not transport them prior
Regards
Hari

Getting "No Object type found error" in BPM sceanrio.

Hi Friends,
I am doing File to RFC with response sceanrio using BPM. For this i configured one receiver step, one send synchronous step to send input message to RFC and one asynchronous send step to send the response to a file.
I have configured 3 receiver determinations(file to bpm,bpm to ECC, bpm to file), 3 interface determinations(file to bpm, bpm to ecc, bpm to file) and 2 Receiver agreements(bpm to ecc and bpm to file).
I am getting the followin error:
No object type found for the message. Check that the corresponding process is activated
My sxi_cache has return code as ' 0 '. And as suggested in some threads, i deleted the objects and recreated them again. but still getting the same error.
Please help me in solving this issue.
Thanks & Regards,
Senthil.

Hi Senthil,
Is all the objects created in IR and ID are reflecting in SPROXY tcode.
Check SM59=> AI_JCO_Server connection is working or not ?
Check SXMB_IFR tcode is working fine or not ?
Check sm22 and let us know the dumps are there ?
Check default trace files for any errors in the following paths ?
1.usr/SAP/X7systemname/DVEBMGS07/J2EE//cluster/server0/log/defaulttrace.trc
2.usr/SAP/X7systemname/DVEBMGS07/J2EE//cluster/dispatcher/log/defaulttrace.trc
3.usr/SAP/X7systemname/DVEBMGS07/J2EE//cluster/dispatcher/logs/services/http/req_resp.trc
Thanks,
Jogula Ramesh

Error: Object Name cannot be Empty, when loading Master Data

Hi all,
We are loading mater data for one of the InfoObject, which is failing at Processing Step. Data is loaded properly till PSA. There is short dump error giving MESSAGE_TYPE_X error. On analyzing Job Log, We found the error like, "OBJECT NAME CANNOT BE EMPTY".
We checked InfoObject and found that, One of its attribute is inactive. Can it be the cause of error? Please Reply soon.
Thanks,
Harpal

It must be the cause of error. Please activate all inactive attributes and load the data again.
Regards
Pankaj

TYPE OR TABLE DEPENDENCY OF OBJECT TYPE (ORA-2303)

제품 : SQL*PLUS
작성날짜 : 2004-05-20
==================================================
TYPE OR TABLE DEPENDENCY OF OBJECT TYPE (ORA-2303)
==================================================
PURPOSE
Type이나 table의 dependency가 있는 type을 drop하거나 replace하고자
하면 ORA-02303 error가 난다. 이 error의 원인을 알아보도록 한다.
Explanation
Object의 attribute나 method를 수정하기 위해서는 object type을 drop하고 재생성
해야 한다. Type이나 table의 dependency가 있는 type을 drop하거나 replace하고자
하면 ORA-02303 error가 난다. Object type은 type (nested table 또는 VARRAY)
또는 object table로써 구체적으로 표현된다. 만약 data의 보존이 필요하다면
temporary table에 manual하게 옮겨놓아야 한다.
SQL Reference guide에 의하면 DROP TYPE FORCE 옵션은 recommend하지 않는다.
왜냐하면 이 옵션을 쓰게 되면 복구가 불가능하고 dependency가 있던 table들은
access하지 못하는 결과를 초래한다.
Example
아래의 query 1, 2, 3은 dependency을 확인하는 query문이다.
1. Find nested tables
select owner, parent_table_name, parent_table_column
from dba_nested_tables
where (table_type_owner, table_type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = '<typeOwner>'
and elem_type_name = '<typeName>');
2. Find VARRAYs
select owner, parent_table_name, parent_table_column
from dba_varrays
where (type_owner, type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = '<typeOwner>'
and elem_type_name = '<typeName');
3. Find object tables
select owner, table_name
from dba_object_tables
where table_type_owner = '<typeOwner>'
and table_type = '<typeName>'
and nested = 'NO';
Example ) Logon as Scott
/* Create an user defined object type */
SQL> create type object_type as object (
col1 number,
col2 varchar2(20))
Type created.
/* Create nested table type */
SQL> create type object_ntable as table of object_type
Type created.
/* Create varray type*/
SQL> create type object_varray as varray(5) of object_type
Type created.
/* Create parent table with nested table and varray */
SQL> create table master (
col1 number primary key,
col2_list object_ntable,
col3_list object_varray)
nested table col2_list store as master_col2
Table created.
/* Create object table */
SQL> create table object_table of object_type (col1 primary key)
object id primary key;
Table created.
ORA-2303 results if attempt to drop type with dependencies
SQL> drop type object_type;
drop type object_type
ERROR at line 1:
ORA-02303: cannot drop or replace a type with type or table dependents
위의 queery 1,2,3을 이용하여 object type dependency을 확인한다.
-- Find nested tables utilizing object type
SQL> select owner, parent_table_name, parent_table_column
from dba_nested_tables
where (table_type_owner, table_type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = 'SCOTT'
and elem_type_name = 'OBJECT_TYPE');
OWNER PARENT_TABLE_NAME PARENT_TABLE_COLUMN
SCOTT MASTER COL2_LIST
-- Find VARRAYs utilizing object type
SQL> select owner, parent_table_name, parent_table_column
from dba_varrays
where (type_owner, type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = 'SCOTT'
and elem_type_name = 'OBJECT_TYPE');
OWNER PARENT_TABLE_NAME PARENT_TABLE_COLUMN
SCOTT MASTER COL3_LIST
-- Find object tables
SQL> select owner, table_name
from dba_object_tables
where table_type_owner = 'SCOTT'
and table_type = 'OBJECT_TYPE'
and nested = 'NO';
OWNER TABLE_NAME
SCOTT OBJECT_TABLE
참고)
bulletin : 11576 처럼 utility을 이용하는 방법이 있다.
우리는 여기서 주의하여야 할 것은 script $ORACLE_HOME/rdbms/admin/utldtree.sql
을 내가 보고자 하는 user에서 돌려야 한다는 것이다.
$sqlplus scott/tiger
SQL> @$ORACLE_HOME/rdbms/admin/utldtree.sql
SQL> exec deptree_fill('TYPE','SCOTT','OBJECT_TYPE');
PL/SQL procedure successfully completed.
SQL> select * from ideptree;
DEPENDENCIES
TYPE SCOTT.OBJECT_TYPE
TYPE SCOTT.OBJECT_NTABLE
TABLE SCOTT.MASTER
TYPE SCOTT.OBJECT_VARRAY
TABLE SCOTT.MASTER
TABLE SCOTT.MASTER_COL2
TABLE SCOTT.OBJECT_TABLE
Reference Documents
Korean bulletin : 11576
<Note:69661.1>

Hi Carsten,
Thanks for the sharp hint. It works.
However, when I create a table using the schema, it gives me this error:
varray DOC."LISTOFASSIGNEDNUMBER"."ASSIGNEDNUMBER"
ERROR at line 14:
ORA-02337: not an object type column
Here is the script:
CREATE TABLE CUSTOMMANIFEST (
ID NUMBER PRIMARY KEY,
DOC sys.XMLTYPE
xmltype column doc
XMLSCHEMA "http://www.abc.com/cm.xsd"
element "CustomManifest"
varray DOC."LISTOFMANIFESTPORTINFO"."MANIFESTPORTINFO"
store as table MANIFESTPORTINFO_TABLE
(primary key (NESTED_TABLE_ID, ARRAY_INDEX))
organization index overflow
varray DOC."LISTOFASSIGNEDNUMBER"."ASSIGNEDNUMBER"
store as table ASSIGNEDNUMBER_TABLE
(primary key (NESTED_TABLE_ID, ARRAY_INDEX))
organization index overflow
LISTOFASSIGNEDNUMBER itself is complexType and not sure where is the error....
You may note there are more than two hierachy/levels...
Thanks.

Released Object Types must be transportable

Hi,
I am trying to release my BAPI and the BOs, but I am getting this error: "Released Object Types must be transportable"
Please suggest. Does it have anything to do with the function modules I created of its the BOs?
Thanks,
Apurv

Hi
Jawle Apurv and Vempalli.
Do like this copy Same Business Object to Another Name Save it in Transport Request and in Transportable Objects.
This is the Best way overcome from that error .
Regards,
Hiriyappa

ORA- 31684 Object type already exists while import

Hi All,
I wrongly imported a user schema "AP_PD@SRV01" to user "A_IT@SRV02" (Instead of "AP_IT@SRV02").
User AP_IT and Tablespaces are already exists and used remap option while import.
remap_schema=AP_PD:A_IT (instead of mapping to user AP_IT, I misspelled as A_IT)
remap_tablespace=AP_PD_DATA:AP_IT_DATA remap_tablespace=AP_PD_INDEX:AP_IT_INDEX
After successful import to "A_IT@SRV02", I deleted the user "A_IT"
SQL> DROP USER A_IT CASCADE;
I restarted the import to the correct user schema .. i.e AP_IT@SRV02
remap_schema=AP_PD:AP_IT remap_tablespace=AP_PD_DATA:AP_IT_DATA remap_tablespace=AP_PD_INDEX:AP_IT_INDEX
and import was completed with the following errors
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"AP_IT" already exists
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
ORA-31684: Object type PACKAGE:"AP_IT"."DBMS_NUMSYSTEM" already exists
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
ORA-31684: Object type PACKAGE_BODY:"AP_IT"."DBMS_NUMSYSTEM" already exists
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 3 error(s) at 07:53:32
My questions ...
1.Can I assume that import was success as these objects were already exists.
2.Does this effect in anyway to the end users if I ignore this errors assuming import was successful.
3.If import is not a success then what should be my next step to import successfully.
Thanks.

Ven wrote:
Hi All,
I wrongly imported a user schema "AP_PD@SRV01" to user "A_IT@SRV02" (Instead of "AP_IT@SRV02").
User AP_IT and Tablespaces are already exists and used remap option while import.
remap_schema=AP_PD:A_IT (instead of mapping to user AP_IT, I misspelled as A_IT)
remap_tablespace=AP_PD_DATA:AP_IT_DATA remap_tablespace=AP_PD_INDEX:AP_IT_INDEX
After successful import to "A_IT@SRV02", I deleted the user "A_IT"
SQL> DROP USER A_IT CASCADE;
I restarted the import to the correct user schema .. i.e AP_IT@SRV02
remap_schema=AP_PD:AP_IT remap_tablespace=AP_PD_DATA:AP_IT_DATA remap_tablespace=AP_PD_INDEX:AP_IT_INDEX
and import was completed with the following errors
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"AP_IT" already exists
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
ORA-31684: Object type PACKAGE:"AP_IT"."DBMS_NUMSYSTEM" already exists
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
ORA-31684: Object type PACKAGE_BODY:"AP_IT"."DBMS_NUMSYSTEM" already exists
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 3 error(s) at 07:53:32
My questions ...
1.Can I assume that import was success as these objects were already exists.
2.Does this effect in anyway to the end users if I ignore this errors assuming import was successful.
3.If import is not a success then what should be my next step to import successfully.
Thanks.You mentioned AP_IT schema and tablespaces already exist before doing first import itself.
Did you check the list of objects in AP_IT schema before performing import?
The following error is just an informational message and can be ignored:
ORA-31684: Object type USER:"AP_IT" already exists
But, the other 2 errors which says that package +"AP_IT"."DBMS_NUMSYSTEM" already exists+ means you have package in AP_IT schema and it wasn't replaced from the dump you imported. If you need the package from the dumpfile, you can drop the package and can import PACKAGE alone.
Hope this helps.
Regards,
Murali Mohan

Urgent: Application Object Type for ALE IDoc

Hi All,
I am struggling with ALE IDoc, I just wanted to know that is it mandatory to create Application Object Type when i have created my own message type, Idoc type, segment type and Function Module. I am Getting an error while excuting transaction we42( Maintaining Process code)
Error: Application Object Type is not planned.
Please Help with this. i don't have any requirement of filtering or serialisation, so still do i need to create these application objects.
Useful ans will be rewarded.
Thanx

Hi,
Yes u need to have the assignment of Object type as ur extending the IDOC.
Check the steps below:
TCode- BD95.
Create ALE object type Z... with table name EKKO and Field name -BSART
Step2:
Tcode- BD59 Assignment of Object type to Message
Give the message type ORDERS.
Assign the object type Z........ to segment type E1EDK01 with field BSART.
Regards
Kannaiah

Some chart types cannot be combined with other chart types

Good morning,
I am working on a MacBook Air (purchased Oct 2009) running Lion. While working in Excel 2011, I encounter the error "Some chart types cannot be combined with other chart types. Please select a different chart type." I am highlighting 46 cells to create a marked line graph. There are no other charts in the file. I called Microsoft support who told me they had not heard of this problem in Excel (only in PowerPoint). I also took it to an Apple Store Genius, who was unable to solve the problem, which is understandable, given that he does not work for Microsoft.
To try to resolve this issue, I have recopied the data to a new spreadsheet, re-typed all the data to a new spreadsheet, and deleted plist files. When I sent it to a different computer (which was running Excel 2011 and Snow Leopard), I could make the figure but I cannot edit the figure or add data on my laptop.
Any suggestions that you have would be much appreciated,
Signed,
One stressed out PhD student who desperately needs Excel to work

Hi, folks.
Apparently, when using Excel 2011 and running Lion, if the tab names in excel contain a period (.), this error occurs. I removed the periods and now I can graph again. I hope this helps anyone else who may experience this problem.

IDOC - Application object type not planned

Hi all,
I am doing an inbound idoc.... in TCODE we42, i trying to put function module which i created, attached to the process code.
However, when i put my function module ZIDOC_INBOUND to the process code... it comes out error, 'Application Object Type not planned.'
Why is this so?
Please advice...
Thanks and regards...
William Wilstroth

Sorry... i think this should be in Data Transfer section

Impdp ORA-31684: Object type USER:"USERNAME" already exists

Hi,
I use expdp/impdp to duplicate one schema in a database like this:
expdp system/manager@DB SCHEMAS=SCHEMANAME
then I drop destination Schema like this
drop user SCHEMANAME_NEW cascade;
create user SCHEMANAME_NEW identified by PW default tablespace TABLESPACENAME;
and impdp like this
impdp system/manager@DB FULL=Y REMAP_SCHEMA=SCHEMANAME:SCHEMANAME_NEW
and I get this error:
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"SCHEMANAME_NEW" already exists
I know that the import was successful, but this error breaks my hudson build.
I tried to add exclude like this
impdp system/manager@DB FULL=Y REMAP_SCHEMA=SCHEMANAME:SCHEMANAME_NEW exclude=USER:\"=\'SCHEMANAME_NEW\'\"
I need to get rid of this error.
Thx

You get this error because you precreated the user. All you need to do is add
exclude=user
to either your expdp or impdp command. Or let impdp create the user for you. If you need it to have a different tablespace you can just use the
remap_tablespace=old_tbs:new_tbs
This should take care of the default tablespace on the create user command.
Dean

Object type 'EBAN' is not defined

Hi All,
I have a developed a custom workflow for PR release.
but the workflow is not triggering.
When i checked in SWU3 configuration, check event linkages, i found that the error message Object type 'EBAN' is not defined.
Can someone tell me what it means and how can i fix it?
Thanks and regards,
Raj

Hi PK,
r u using ReleaseStrategy, did u try simulate it, get help from MM consultant, check whether its working perfect.
If tht works fine, switch on ur SWEL (first go to SWELS and click SwitchOn).
Create a PR and chk SWEL, see if ur object BUS2105 is triggered ?
Aditya

Error: modelled objects types cannot be generated

Similar Messages

Maybe you are looking for