Error msg raised in a trigger into an APEX validation box?

Hi,
I am working on a FORMS to APEX conversion. In the application we are converting, there are a lot of triggers containing validations using a RAISE_APPLICATION_ERROR. For example, there could be a validation on a status change in a "before update trigger".
When that happens, there's the error template page with the red X with the SQLERRM. I would like to be able to take that message and show it like it was a normal APEX validation.
So far, the only solution I have would be to duplicate the validation code from the triggers and put them in APEX validation. But the application is pretty much done, so that would require me to go back to all the pages and modify them.
Any solutions? How do you deal with sql error msg?

This can also be caused in iTunes 7 by "dead tracks": songs that iTunes is expecting to find in a certain place but the song file isn't there.
I recently upgraded to version 7 and got this message every time I started iTunes. I used the iTunes COM SDK for Windows with JScript to find all the dead tracks in my library. Then I fixed them by either deleting them from the library or else correcting the library's idea of where the song file was. Once I did this the message went away.
Another way to look for dead tracks is to parse the iTunes library XML file and look for invalid file paths. I did this in Perl without too much trouble.
(I'm cross-posting this to several threads about the same problem.)

Similar Messages

  • HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • How to find error msg is already there in a validatorbefore raising a error

    HI,
    I have a program of type validator which is executing twice. For example assume that there is a piece of code which throws JboWarning if the 'if-condition' is true based on some parameters.
    For the first attempt the 'if-condition' will be true and raise a Warning message in the UI. As the program executes twice, for the 2nd attempt also it enters into the 'if-condition' and throws warning.
    So this way the warning is displaying twice.
    I want to know is there any method to find whether Error(or Warning) message is already there in a validator or not before raising next Error(or Warning).
    I checked some of the Error methods like hasErrorMsg(), getErrorMsgId() - they didnt server the purpose.
    Is there any way to achieve this for a validator.
    Thanks,
    Anusha

    Hi Akash,
    I tried that one, it is of no use in my scenario.
    Expected to work:
    When i click some action button like 'Save' on UI, it will go to the corresponding java Validator.
    It will process all the methods in the program, at one of the method it fails 'if-condition' and throws Warning message and it will show up in the UI.
    When i clicked 'Ok' for that warning message in UI. It has to save the transaction. But the transaction is not saving. It is saving for the 2nd attempt.
    Issue is like:
    When i click some action button like 'Save' on UI, it will go to the corresponding java Validator.
    It will process all the methods in the program, at one of the method it fails 'if-condition' and throws warning message which will show up in the UI.
    Now i clicked 'Ok' in UI. As the transaction is not saved. I clicked 'Save' option again. Now it will process all the methods and go to the same method and throw warning message again.
    Now i clicked 'Ok' and then the transaction is saved.
    I guess here each attempt is independent of one another. So i want to know a method if exists, to track if the 1st warning message thrown then not to throw the same warning message again.
    Is there any property for JboWarning to set some sort of flag or any method which serves this scenario.
    Please let me know
    Thanks,
    Anusha

  • I put incorrect passcode to unlock my iphone and it disabled my phone, instructions say to restore but when I try to i get error msg saying to turn off the find my iphone app in order to restore, how can i do that w/o being able to get into my phone ???

    after trying to remember my new pass code and failing, my iphone disabled and is now telling me to connect to itunes, ive done that and tried instruction to restore from back up however when i do that i get an error msg saying that i need to turn off the app find my iphone to b able to restore, i cant do that tho because i cant use my phone and i dont see app on my computer on itunes either???what do i do >??

    This the Activation Lock. Read here: http://support.apple.com/kb/HT5818
    The only way is to login to iCloud with your computer browser and wipe the iPhone.
    If you can't then you have a brick, Apple won't help and AL cannot be bypass.
    https://www.icloud.com

  • How to get Error Msg from A step in TestStand into a variable (with Record Result disable)

    I have disable "Record Result" in a step (action) that call a Labview VI (Minimise memory usage during long run).
    But I want to capture the error msg and put it in a local variable (locals.log).
    So in the "Post Expression" of that step, I add:
    locals.log = step.result.error.msg
    But it always an empty string, Is the post expression executed when the there is an error in the step ?
    So How can I capture it ?

    Hi,
    The trouble is that when a step errors, the Post Expression doesn't get executed.
    Try using one of the Override callbacks - SequenceFilePostStepRuntimeError, ProcessModelPostStepRuntimeError or StationPostStepRuntimeError.
    There is an example in the Examples\Callbacks.
    The Step properties are passed as a parameter to the callback so you can get the error message and do your logging.
    Hope this helps
    Ray Farmer
    Regards
    Ray Farmer

  • In mail, I keep getting the same "re-enter password" error msg even though the password in the mail accts is still there.  This started on day 15 of a 30-day trip and continued until i walked into my office at home and my own wi-fi network.  Fix?

    iPad2 -- In mail, how come i suddenly get password error msgs on day 15 of a 30 day trip (preventing me from using Mail) until i return on day 30 to my home wi-fi, when all of a sudden everthing is OK again?  How can i fix this when it happens again?

    Probably your email provider requires that email access be made from a point on their network. This would not be the case while you were traveling be would again be true when you returned.
    Check with your email provider (your ISP?)
    It would help if you identified who is providing your email service.

  • Error in Raising exceptions in a method and handling the same in the WF

    Hi All
    I tried to implement Raising exceptions in a method and handling the same in the workflow
    in the same way given in SAPtechnical site .
    1.by adding a error msg in exception parameter .
    2. if the select query fails, to fetch the agent then :exit_return 9001 'ztable name' space space space.
    3.in the Background activity in which this method is called there automatically one outcome appears ,and I hav acitvated that outcome and in that done what need to be done for that error handling - just send a mail to concern person .
    4. in the normal outcome of the activity , the step to be executed are there .
    but its not working , if exception come then the WF stuck there only . it do not follow the exception outcome .
    Kindly help me , How can I do the exception handly in WF.
    thanks & Regards
    Kakoli

    > That is usually the case - you catch an error in the underlying program and pass that back so the workflow can go into error.
    > You're doing it correctly.
    I don't think that's quite right.
    If you define an error/exception in a method, it is automatically mapped to an outcome of the step/task.
    If you activate that outcome, then you can handle the exception in a branch of the workflow.
    For example: 'Remote connection is down, please contact Basis'
    The step should only go into error if an outcome occurs that you have NOT activated.
    So the original question is valid. Please give some more information on what the error message is..
    chrs
    Paul

  • SQL error msg - The DELETE statement conflicted with the SAME TABLE REFERENCE constraint

    Executed as user: ****. The DELETE statement
    conflicted with the SAME TABLE REFERENCE constraint "FK_PARENT_TASK_REF".
    The conflict occurred in database "****", table "****", column
    'PARENT_TASK_ID'. [SQLSTATE 23000] (Error 547) The statement has been
    terminated. [SQLSTATE 01000] (Error 3621). The step failed.
    Does this error msg indicate the whole script failed to execute or was it just a single step/task that failed ?
    What does error msg mean ?
    Anyway to prevent this error msg and ensure script runs successfully

    Hi mdavidh,
    This error occurs because the record  'PARENT_TASK_ID' was referenced by 'FK_PARENT_TASK_REF'.
    Please refer below codes:
    CREATE TABLE MyTable (
    ID INT, primary key(ID), -- primary key
    ID_Parent INT foreign key(ID_Parent) references MyTable(ID), -- foreign key reference the same table
    insert into MyTable(ID,ID_Parent)
    values(0,0);
    insert into MyTable(ID,ID_Parent)
    values(1,0);
    insert into MyTable(ID,ID_Parent)
    values(2,0);
    insert into MyTable(ID,ID_Parent)
    values(3,1);
    insert into MyTable(ID,ID_Parent)
    values(4,3);
    insert into MyTable(ID,ID_Parent)
    values(5,4);
    CREATE TRIGGER MyTrigger
    on MyTable
    instead of delete
    as
    set nocount on
    update MyTable set ID_Parent = null where ID_Parent in (select ID from deleted)
    delete from MyTable where ID in (select ID from deleted)
    Now we could delete records.
    delete from MyTable where ID_Parent=0
    Thanks,
    Candy Zhou

  • Error msg 13019 please help

    hi
    i need help in getting rid of this error msg 13019. it started after downloaded a couple of songs. and it will not allow me to sync my nano ipod thanks

    Ive fixed this issue before. The steps are kinda long but they work.
    This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
    -Open itunes
    --click, edit, click preferences
    --select advanced
    ---make a note of the iTunes media folder location on a notepad.
    ---put a check in organize files
    ---take the check out of copy files
    ---click ok
    --Click file, at the top of iTunes
    --move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
    At this point, if you have playlists you want to save:
    -Create a folder on your desktop, call it, playlists
    --Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
    --right click the playlist, select export playlist
    --Navigate to your desktop and open the playlist folder and save.
    ---Do this for each playlist you want to save
    -Close itunes
    -Click your start button, and open computer or my computer
    --Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
    --Open the iTunes folder.
    --Stop here
    -You will see icons that look like folders and you will see icons that look like files-
    -You will KEEP the FOLDERS
    -You will DELETE the FILES
    --If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
    --That was the magic--
    -Disconnect your iPod if connected.
    -When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
    -Click file at the top
    --Select, add FOLDER to library, not to be confused with add file.
    --In the window that pops up, locate and click on computer or my computer
    --From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
    --Click the iTunes music/media folder one time so it highlights.
    --On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
    All you music will start to import back into iTunes.
    -Plug in iPod after completed
    --a message pops up about being synced with a different library.
    --Click erase and sync
    --Watch all your songs go on your iPod with no error message.
    From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
    Hope this helps!!!
    Julian
    p.s. Follow the directions exactly.
    p.s.s. To add your playlists back to iTunes:
    -Click file at the top of the screen
    --move your mouse over library, selecte import playlist
    --on the new screen that pops up, navigate to your desktop
    --open the playlist folder, select the first playlist, hit ok
    --repeat for each playlist exported

  • Error msg, "Maximum selection does not contain value 9999999999.

    Hi, I am getting this error wile doing Reclassification of HFM Movement.
    Error msg, "Maximum selection does not contain value 9999999999 of subassignment HFM CD2 & Asset Type "                                         
    in the Data Monitor, ( in Reclass Net Reserve). While running BCF task for a company for period 16/2009     
    Actually, We have converted the consolidation area from XX(2009) to YY(2010).
    Before this task, user has performed the balance carry forward.
    My Analysis is as follows:-
    Method Used in this Reclassification                                         
    RECYX (Reclassify HFM Movement at YE lvl 10)                                        
         TRIGGER                                   
         Items : 100-299, 9900-9999                                   
         HFM Movement Type : O200 to O300                                   
         Posting Level : 10                                   
         TARGET                                   
         Items : 100-299, 9900-9999                                   
         Move : O100C                                   
         Posting Level : 10                                   
         HFM CD2 and Asset type : Ticked                                    
    After TEST run in UCMON, the error message comes :-                                        
    The "HFM CD2 & Asset Type value 9999999999" is not maintained in Breakdown Categories Y500, Y700  etc.                                        
    Breakdown categories in Workbench                                        
    Maintained as "OPTIONAL, Initialized value allowed".                                        
    Single Selection                                         
    1A                                        
    1B                                        
    AR                                        
    GA                                        
    Default Selection                                        
    99999999999                                        
    BCS CUBE                                         
    HFM CD2 & Asset Type - coming blank               
    LOTR                                        
    HFM CD2 & Asset Type - Coming blank     
    Please help to go forward.
    In Anticipation,
    Deepankar Jain

    Thanks a lot Dan for the reply.
    Yes, the single selection is 1A, 1B etc, I agree that including this default value 9999999999 in single selection will resolve this issue, but the BREAK DOWN TYPE is OPTIONAL, that means It will also consider a blank value, right?
    Also, In the method defined for RECLASSIFICATION in workbench, in the TARGET parameters, the" HFM CD2 and Asset Type"  is blank but the "DEFAULT is TICKED" which makes it a mandatory derivation rule.
    Please correct me if I am wrong.
    Your replies on it are highly appreciated.
    Thanks and Regards,
    Deepankar

  • I'm getting the error msg "apple application support was not found.  Apple application support is required to run itunes. error 2.  How can i fix this?

    Hi,  I was running itunes software just fine. I got some malware and unintalled everything that was from apple.  Now, I reinstalled itunes but can't run it because I get the msg "Apple application support was not found. Apple application support is required to run itunes. Error msg 2.
    What can I do to fix this?
    Thank you.

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Windows error msg:  "Can not write to drive G: Joe's iPod"

    Halfway thru the download process (1780 songs) from itunes to my ipod I get a windows error msg:
    "Can not write to file G: Joe's ipod. All the data has been lost. Check for an error on your computer or network."
    Getting the error msg: " Can not write to drive G: Joe's ipod. All data has been lost, your computer or network may have failed."
    "Windows/ My computer" shows my ipod as drive G: and itunes starts up properly when I plug my ipod into my firewire port. About halfway thru the download (1780 songs) the transfer from itunes to my ipod stops and I get the above error message. (Never worked with USB). I am not on a network.
    According to tech supt, I have:
    -Installed Service Pack 2,
    -Restored ipod to factory settings
    -Installed update 5.0.1. Everything worked fine last Feb with the version 4 of itunes when I first loaded everything up.
    Have tried to reinstall version 4, but no luck.
    My ipod charges fine thru the firewire cable.
    Any ideas?? Thanx anyone.

    Joe,
    I am having the same problem, did you ever solve it, please email me at [email protected] with any help
    Thanks

  • I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    Check out this thread: https://discussions.apple.com/thread/1421870
    It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

  • Error when Integrating Ms Exchange server into Enterprise Portal

    HI All,
    We are trying to integrate them MS Exchange server into Enterprise Portal and is facing the problem with WebDAV Repository manager.
    i've already created a HTTP System given the right url for the system and i used the system in the WebDAV Repository, when i try to monitor the component called repository manager it is in yellow color and is showing the server status as start up failed and error msg is,
    <b>errors   1
    requests   1
    bytes-per-second   0
    successes   0
    response-average   234
    last-error-0   2006-05-19T05:22:31Z: PROPFIND /exchange/: 401 Unauthorized
    failures   0</b>
    do anyone of u know the exact error?
    Your help will be appriciated.
    Thanks in advance,
    Sireesha.

    With a Live Office connection, you would typically use the URL iView and the opendocument URL to integrate the dashboard into the Enterprise Portal. There are existing posts on this forum about opendocument and Xcelsius dashboards.
    Obviously you need to make sure the dashboard refreshes fine outside of the portal, for instance from Infoview.
    Then, you need to look at the cross domain constraints : have both Infoview and Enterprise Portal in the same domain or use crossdomain.xml. They are lots of posts on this forum about that too.

  • I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me?

    I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me? Already changed the extension of the excel document to xlsx an now gives an unknown import error.

    In Excel have you tried saving directly to xls (not xlsx) and opening the xls in Numbers?
    If you have a complicated workbook in Excel that uses lots of Excel's advanced features, Numbers may not be able to handle the import.  It does pretty well on basic things, though.
    If you're just trying to get data into Numbers, then often copy-paste from Excel is easier than trying to open xls files.
    SG

Maybe you are looking for