Error msg when I compact: The folder 'Inbox' could not be compacted because writing to folder failed. Verify you have enough disk space, and have write privileg

I recently had my computer serviced. I re-downloaded Thunderbird (getting a newer version), and retrieved my saved email. Now, Thunderbird keeps asking me to compact, but when I do, I get this error message:
The folder 'Inbox' could not be compacted because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.
Obviously, since I'm getting mail all the time, I have write privileges, and disk space. The question is whether there's a setting I need to specify, or whether Thunderbird is writing to a special partition that may have gotten write-protected when my computer was in the hospital - or whether this is related to a known bug.
All help appreciated.

The only know bug I can see is probably your anti virus is trying to scan the file when the new inbox is created leaving Thunderbird to think the file was not created.
As an experimental / diagnostic process. Restart the machine in safe mode with networking using Microsoft instructions for [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7] then try the compact. If it works I was most likely right. If it does not, another idea must surface.

Similar Messages

  • Linux Mint 17, migrated from Win7: Verify that you have enough disk space, and that you have write privileges to the file system, then try again.

    I get this error message (The messages could not be filtered to folder 'Generic Folder' because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.) popping up on many, though not all of my incoming filters. I recently migrated from a Windows 7 installation to a Linux Mint 17 system.

    I did give it time to run through everything when I initially migrated, and it frequently will sit open for 3 to 4 hours while I'm working on other projects.
    The 'Generic Folder' represents sorting folders in my main mail account in Thunderbird. For example, my mail which is listed to filter into my 'Amazon' folder is sorted there with no problem, while any mail designated to be filtered into my 'Games' folder prompts the above error massage.

  • Why does my computer freeze when updateing if i have enough disk space and no disk repairs are needed?

    I have problems updating my softwarebecause my computer freezes when it restarts to install. I have enough disk space and I checked for disk repairs and everthing is ok. Still can't update and not my cumputer is taking longer to turn on. There is an earth blinking then i get the apple logo blinking before it turns on and this takes close to 5 minutes.

    When you say, "disk repairs" are you referiring to permissions or verifying the disk because clearly there's a problem.
    Boot from your install disc, run Disk Utilty to "verify" and if necessary repair the startup disk. (Not Verify Disk Permissions).
    Using Disk Utility to verify or repair disks

  • How do I get home share when it says: the selected files could not be copied because the machine is not a member of the home share?

    What do I do when it says the selected files could not be copied becasue the machine is not a member of the home share?

    You dont say how you are connected to PC .
    This is how i copy data .
    USB Mass Storage mode .
    Use Windows Explorer to open memory card and copy .
    Your free space problem if not resolved copy data off memory card to pc then back .
         jje

  • Firefox thinks I don't have enough disk space, and cancels the download when it's almost finished.

    So recently, I was downloading a pretty huge file for a game (4.5 gigabytes), and it was nearly finished, when an error popped up, saying that there wasn't enough disk space for Firefox to download the file. At the time, I had just enough disk space to download the file (yes, I checked and made sure). The download became unresumable, and I was incredibly irked to find I had to download again, as my download speed is not very good at all. I put it in overnight and made a note of where it stopped, and in the morning, when I checked it, it stopped in the EXACT SAME place, which is at about 4.1/4.5 GBs. I've made a lot more room since then, and I'm downloading it for the third time now. If this happens again, how can I solve this? Thanks.
    Also, it's a .dat file. I have no idea if that has any bearing on what may cause this, but if anyone knows anything, please let me know.

    The file system is a FAT32 Bootcamp Partition, and what baffles me is that I've been able to download and store files that are over 4 GBs before. And while I'm at it, why is it that you say FAT32 file-systems can't store files over 4 GBs? I've never heard of that happening before.
    Many thanks.

  • Adobe Presenter is unable to publish this presentation. Please check that you have enough disk space and you have appropriate permissions for the destination folder.

    I have Presenter 10 and published already my presentation to adobe connect. But now I cannot do that any more. I can't publish to my computer or as pdf also. I used collaboration and then put it off, but no effects. Where is the problem?

    Hello Thomas,
    I also deleted files in C:\Windows\Temp, but that didn't help, I still don't have a presenter add in icon in a ribbon, but under the new windows account I have presenter in a ribbon. 
    I am using Adobe Presenter 10, MS PowerPoint 2013 and Windows 7 Professional (Service Pack 1). On my "old" account I can see presenter in File, Options, Add-Ins as Inactive Application Add Ins. Every time I check it to be active, but all without result. So I prepare the slides on my account and go to another account for publishing. I'll be happy to resolve this problem.
    Svetlana

  • When compacting, I get an alert that asks me to verify that I enough disc space and that I have write privalages to the file system. How do I do this?

    Mozilla asks me if I want to compact, I click 'yes' and after a while I get this:
    Alert
    The folder 'inbox' could not be compacted because writing to folder failed.Verify that you have enough disc space, and that you have write privileges to the file system, then try again.
    I have no idea what to do know. Please can someone help me?

    Try restarting your computer in windows safe mode. Links to Instructions here http://thunderbirdtweaks.blogspot.com.au/2014/02/basic-troubleshooting-for-thunderbird.html
    See if compacting will work them

  • IDVD5, "The application iDVD could not be opened because the required ha."

    First post in these subject forums. I am posting the same text in iDVD and iMovieHD which were from iLife'05, but I won't post there.
    I loaded iLife'05 and also managed to get iDVD5 loaded although the packaging indicated that I needed to have a 733mhz G4 or faster processor and I have a Prismo Powerbook, 500 mhz and it was successful or maybe not.
    Then I opened iDVD, I got this Error message..."The application iDVD could not be opened because the required hardware could not be found"...which makes sense as I have an external Lacie (CD-R,-RW, DVD-R,-RAM,-RW,R,+RW,R DL) burner that I bought about a year ago that my wife also uses on her G4 tower.......... and I did not have it connected. So I connected it and when I opened iDVD again and it still reads: "The application iDVD could not be opened because the required hardware could not be found." Shut down and reboot, no difference.
    This probably does not have any bearing on the issue but in the System Profiler for "Disk Burning" there is a parameter "Burn Support" which is "Yes (Unsupported)", should this be "Yes (supported)"?
    Question #1: Does iDVD5 only work with an Apple "superdrive" or does it work with other third party "DVD burners" ?
    So I used iMovieHD from iLife'05 to create a project of an old family vacation (from an old 8mm Sony Handycam) and wanted to create a DVD, for archive reasons and to view on TV with a DVD player, but I could not do anything because of different errors now in iMovieHD.
    File > Share...(a window opens and I choose iDVD and then click the "share" button) and this error comes up:
    The movie could not be sent to iDVD, because of an unknown error.
    "Please make sure that iDVD is properly installed, that your project disk has write permission, and that you have enough disk space. (Error 0)"
    Next I tried: File > Burn Project to Disc......and this error comes up.
    No Disc Burning Drive Found
    "If you have an apple-supported disc burner, please check your connections and try again."
    The project file is 5.89GB and I have 57.97GB free on the hard drive so I don't think that space on the hard drive is an issue.
    Question #2: Is the issue of not being able to create a DVD from iMovieHD related to the iDVD issue although the error messages in iMovieHD and iDVD are different?
    Question #3: How are Video DVD's from the Hollywood Studios able to make DVD's longer than 2 hours?
    Thanks all for your help in advance. John

    Klaus1, thank you.
    I will verify again to make sure that I have the correct driver installed for the LaCie drive and I know positively it was connected via firewire.
    That being said, after reading a lot of postings on the web, I am getting the impression that these iLife05 applications need a native Apple superdrive on order to burn a DVD. I do not have any other third party apps loaded on it yet it, but I will load some that can burn to a DVD. If I am successful in getting the non-Apple apps to burn a DVD with the LaCie, I will try again with iDVD5 and if I still can't get iDVD to do it, then maybe my assumption would be valid.
    Thanks again!

  • Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?

    ? I get an Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?

    You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
    http://discussions.apple.com/forum.jspa?forumID=800

  • On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

    I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
    "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
    So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
                  Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
    If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
    I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be  wonderful.
                 I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                      ThanQ SO very much!
                                                                             [email protected] or [email protected] or [email protected] .
                                                                                               You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                                that's my Facebook "handle".    ThanQ 4 taking the time 2 read all of this!
                                                                                                hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                                as marking this page in my FAVORITES so I can find it fast! Take Care!!!

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • Why am I getting the message "project could not be prepared because an error occurred. (File already open with write permission)" when trying to share my imovie to media browser?

    Why am I getting the message "Project could not be prepared because an error occurred. (File already open with write permission.) when trying to
    share to the media browser?   I have done this many times before and never got this message.  This is very frustrating.  Can anyone help me?

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    Easiest way to find out if this is the problem is by:
    • Create a new User-Account
    • Log out of Your old one and into this
    • Re-try iMovie
    If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occurs only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

    LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

    Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

  • Error: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.

    when trying to download new messages into Thunderbird, I keep getting the error message:
    Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.
    what does this mean and how do I correct it???
    thanks

    I have this problem too, but my Inbox is empty. There are 125 emails waiting on the server, including one i just sent from another address.
    The site you recommended is "having difficulties".
    May 4
    I have now accessed the KB article above. None of the recommended actions made a difference. I deleted about half the 130 emails awaiting download from web-mail, but still got the same error. I can't clean out the inbox because I can't download emails yo it :-( I have 3 other addresses operating under the same server satisfactorily.

  • Windows VPN: Error 720 - A connection to the remote computer could not be established

    Dear all
    I have a windows7 Laptop 64bit Dell 1340.
    I was working with a UMTS card, was connected with a VPN to a windows 2003 server over PPTP and experienced a bluescreen. After this, I have the following errors when connecting to the VPN:
    "Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection"
    and in the event view I receive the following:
    EventID: 1, Source RasSstp
    CoId={A3478DFD-FFA4-4E8F-9DA3-CE829BDA777B}:The initial Secure Socket Tunneling Protocol request could not be successfully sent to the server. This can be due to network connectivity issues or certificate (trust) issues. The detailed error message is provided below. Correct the problem and try again.
    I tried to use the Rarepair.exe tool but it looks to work only on windows xp. I deleted the IP and TCP settings without any luck.
    I run a registry cleaner as well with out any luck.
    Your help will be greatly appreciated!
    Marc

    Hi,
    Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
    If system restore doesn’t help, please also try the following:
    1.    Check if you can establish the VPN via other connections except the connection through the UMTS card.
    2.    Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
    Netcfg -u MS_L2TP
    Netcfg -u MS_PPTP
    Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
    Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
    Then reboot the computer and see how it works.
    Meanwhile, I would like to share the following with you for your reference:
    Troubleshooting common VPN related errors
    Hope this helps. Thanks.
    Nicholas Li - MSFT

  • BB Torch - bluetooth tethering for laptop internet use: "Error 720: A connection to the remote computer could not be establishe​d

    Trying to set up Blackberry Torch for laptop tethering...bluetooth. I have connection/drivers/etc. but keep getting error message: "Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection." Where and what do I chancge setting to so this will work?
     I have synched my phone and laptop wirelessly across other internet connection....just cant get this above to work. Anybody know how to fix this? Thanks!

    Hi,
    Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
    If system restore doesn’t help, please also try the following:
    1.    Check if you can establish the VPN via other connections except the connection through the UMTS card.
    2.    Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
    Netcfg -u MS_L2TP
    Netcfg -u MS_PPTP
    Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
    Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
    Then reboot the computer and see how it works.
    Meanwhile, I would like to share the following with you for your reference:
    Troubleshooting common VPN related errors
    Hope this helps. Thanks.
    Nicholas Li - MSFT

Maybe you are looking for

  • PC laptop works on one Airport, not another?

    My boss is having issues connecting his Fujitsu netbook. Here at our office, he connects with the Linksys router. At his office, his netbook connects fine with his Airport Extreme Base Station. At home, not so much. He gets an "Acquiring Network Addr

  • How to display the Date Time using the System Time zone

    Friends, Can anyone help me with below scenario.. I have to display Date Time on a jsff page, This value associated to one of Transient View object populated from the database.. Is there any way I can handle on the screen to display the same date /ti

  • Enhancing black and white photos

    I have some old washed out black and white photos that I would like to improve.  What are the best steps to use with Elements 10 that will sharpen and enhance my old black and white photos? Thanks, DMDJ

  • EAP-TLS & ACE Appliance "EAP-TLS or PEAP authentication failed"

    Hello - I have a version 3.2 of the ACS appliance and I am trying to set up a successful test of EAP-TLS. I have a W2K server for a CA and I believe I have the certificate install properly. However, I get the "EAP-TLS or PEAP authentication failed du

  • Why does text appear bold when published?

    My entire web site suffers from text that appears bold when I publish. I have followed various other threads, changed typefaces, put in returns and tried a variety of "tricks" and although some people appear to have fixed it, there is no universal fi