"error occurred" error message displayed while backup the iphone4s
Hi all I am Kishore and I am using iphone4s.. while backup my iphone4s an error message getting displayed "Error occurred". how do I process further....
Is there an exact error code or message or all it simply says is 'error occurred'?
Similar Messages
-
I get this message "The operation can’t be completed because an unexpected error occurred (error code -50)" when I try and add or delete any files to my Time Capsule. It just started happening a week ago.
I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that. -
When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80 -
HI,
I get this error "Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it. " when deploying my project from visual studio 2010 to
SharePoint 2010 site. I tried restarting IIS, but it didn't help. This application used to work fine until the server crashed during the deployment process. All the other applications on the same server works fine also. Any ideas how to fix this issue?
Thanks in advance,
AMHi
AM ,
Thank you for your posting!
According to your error message, it says your solution does not have a WSP file associated with it. Take a look at the file system. After you Right Click -> Deploy Solution on the VS Solution, there
should be a .wsp file at <Solution Directory>\bin\<debug|release>.
Also the error can be occurring when the developer try to deploy solutions over pre-existing solutions with material changed in the solution. Go to your Central Administration Site and then
Operations and then Solution Management. Make sure that there not already a solution with the same name deployed or installed there. If there is, remove it and try deploying again.
And you could look in logs and find if there is a below error in ULS log (C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS).
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
When I try to move files from my imac (v10.8.5) to my external harddrive I get the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." How can I resolve this? Thank you.
Some other things to look at.
https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50 -
Hi Expert,
I need help.
I created a custom button to download data to an excel sheet. after clicking the button I am getting message
"An error occurred; please try again. If the error persists, please contact technical support.".
I tried debugging WCEM, but it is not even reaching that point.
Your help will be highly appreciated.
here is the code.
BitContentview.XHTML
<wec:commandButton id="bdtexcel" immediate="true" actionListener="#{cc.vch.DownloadBITData}" type="submit" value="#{i18n['invoices.ui.openitems.printSelected']}"/>
UI-repository.xml
<ViewComponent name="BITContentView" componentHandlerClassName="com.cpr.cprwec.app.comm.module.ebpp.ui.handler.impl.BITDetailViewVCHandler"/>
BITDetailViewVCHnadler.java
package com.cpr.cprwec.app.comm.module.ebpp.ui.handler.impl;
import com.cpr.cprwec.app.comm.module.ebpp.backendobject.interf.EbppBackend;
import java.io.IOException;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.List;
import javax.faces.context.FacesContext;
import javax.faces.context.FacesContext;
import javax.faces.event.ActionEvent;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import com.cpr.cprwec.app.comm.module.ebpp.modulemgmt.impl.EbppModuleAccessImpl;
import com.cpr.cprwec.app.comm.module.ebpp.modulemgmt.interf.EbppModuleAccess;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.DisputeDataDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.OpenItemDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.DisputeDataDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.OpenItemDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.BITDataDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.BITDataDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.BITDetailDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.BITDetailDTO;
import com.sap.wec.app.common.module.common.attachment.businessobject.interf.Attachment;
import com.sap.wec.tc.core.backend.sp.jco.JCoConnection;
import com.sap.wec.tc.core.businessobject.BusinessObjectException;
import com.sap.wec.tc.core.common.exceptions.ApplicationBaseRuntimeException;
import com.sap.wec.tc.core.common.logging.WCFLocation;
import com.sap.wec.tc.core.common.searching.businessobject.impl.GenericSearch;
import com.sap.wec.tc.core.common.searching.businessobject.interf.GenericSearchReturnResultData;
import com.sap.wec.tc.core.common.util.GenericFactory;
import com.sap.wec.tc.core.common.util.Message;
import com.sap.wec.tc.core.common.util.MessageList;
import com.sap.wec.tc.core.common.util.table.Table;
import com.sap.wec.tc.core.common.util.table.TableRow;
import com.sap.wec.tc.core.modulemgmt.ForeignModuleAccess;
import com.sap.wec.tc.core.modulemgmt.ModuleAccess;
import com.sap.wec.tc.core.modulemgmt.exceptions.ModuleInactiveException;
import com.sap.wec.tc.core.modulemgmt.exceptions.ModuleLifecycleException;
import com.sap.wec.tc.core.runtime.WecFrameworkRuntime;
import com.sap.wec.tc.core.runtime.WecSession;
import com.sap.wec.tc.core.runtime.jsf.WecFrameworkRuntimeJSF;
import com.sap.wec.tc.core.runtime.jsf.composition.PageManagerBean;
import com.sap.wec.tc.core.runtime.navigation.NavigationCondition;
import com.sap.wec.tc.core.ui.composition.menu.MenuManager;
import com.sap.wec.tc.core.ui.composition.menu.MenuMetadataException;
import com.sap.wec.tc.core.ui.vc.BuildTime;
import com.sap.wec.tc.core.ui.vc.NavigationParameterBinding;
import com.sap.wec.tc.core.ui.vc.RequestParameterBinding;
import com.sap.wec.tc.core.ui.vc.impl.ViewComponentHandlerBaseImpl;
import com.cpr.cprwec.app.comm.module.ebpp.businessobject.interf.BIT;
import com.cpr.cprwec.app.comm.module.ebpp.businessobject.impl.BITImpl;
public class BITDetailViewVCHandler extends
ViewComponentHandlerBaseImpl<EbppModuleAccess> {
protected static final WCFLocation LOCATION = WCFLocation
.getInstance(BITDetailViewVCHandler.class.getName());
public BITDataDTO bitDataDTO;
public BITDetailDTO bitDetailDTO;
public List<BITDataDTO> BITDataDTOList;
public List<BITDetailDTO> BITDetailDTOList;
public boolean noBITData;
public boolean noBITDetail;
public boolean renderPanel = true;
public boolean isDownloadBITData;
public boolean isDownloadBITDetail;
public boolean downloadStarted=false;
public boolean BITFound =false;
public boolean isBITFound() {
return BITFound;
public void setDownloadStarted( boolean downloadStarted ){
this.downloadStarted = downloadStarted;
public boolean getDownloadStarted(){
return this.downloadStarted;
public void setBITFound(boolean BITFound) {
this.BITFound = BITFound;
public String getObjectID() {
return objectID;
public void setObjectID(String objectID) {
this.objectID = objectID;
public List<BITDataDTO> getBITDataDTOList() {
return BITDataDTOList;
public List<BITDetailDTO> getBITDetailDTOList() {
return BITDetailDTOList;
public Boolean getNoBITData() {
return noBITData;
public Boolean getNoBITDetail() {
return noBITDetail;
public Boolean getRenderPanel() {
return renderPanel;
private static final int DEFAULT_BUFFER_SIZE = 1024000;
public Attachment attachmentData;
public Attachment getAttachmentData() {
return attachmentData;
@RequestParameterBinding(maxLength = 1024)
protected String objectID;
@BuildTime
public String processBuildTime() throws BusinessObjectException {
BIT BIT = null;
noBITData = noBITDetail = false;
renderPanel = true;
if (isLoggedIn()) {
if ( isDownloadBITData == true ){
this.downloadBITDataExcel();
else {
this.getModuleAccess().getBITBO().clearMessages();
BIT = this.moduleAccess.getBITBO().getBITFromBackend(objectID);
BITDataDTOList = BIT.getBITDataDTOList();
BITDetailDTOList = BIT.getBITDetailDTOList();
MessageList objectData = this.getModuleAccess().getBITBO()
.getMessageList();
if (objectData.size() > 0) {
noBITData = noBITDetail = true;
renderPanel = false;
this.addMessageList(objectData);
return checkLoginCondition();
private boolean isLoggedIn() {
return checkLoginCondition() == null;
private String checkLoginCondition() {
NavigationCondition navCondition = getNavigationCondition("login");
if (!navCondition.isFullfiled()) {
navCondition.addToNavigationStack();
return navCondition.getOutcome();
return null;
public String downloadBITData(){
downloadStarted = true;
isDownloadBITData = true;
downloadBITDataExcel();
return checkLoginCondition();
public void downloadBITDataExcel() {
// dummyDebug("downloadBITDataExcel", BITDataDTOList.size(), "", "" );
if (BITDataDTOList.size() > 0) {
try {
attachmentData = this.getModuleAccess().getDownloadBO()
.getBITDataExcel(BITDataDTOList);
if (attachmentData != null) {
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse) faces
.getExternalContext().getResponse();
response.reset();
response.setContentType(attachmentData
.getAttachmentMimeType());
response.setContentLength(attachmentData
.getAttachmentContent().length);
response.setHeader("Content-disposition",
"attachment;filename="
+ attachmentData.getAttachmentName());
response.setBufferSize(DEFAULT_BUFFER_SIZE);
ServletOutputStream out;
try {
out = response.getOutputStream();
out.write(attachmentData.getAttachmentContent());
out.flush();
faces.responseComplete();
} catch (IOException e) {
throw new ApplicationBaseRuntimeException(
"Problem opening file", e);
} finally {
attachmentData = null;
} catch (BusinessObjectException e) {
e.printStackTrace();
isDownloadBITData = false;Thanks Hamendra for checking the issue.
I am setting up breakpoints in WCEM, tab JAVA EE then from menu RUN->Toggle brekpoints and then debug configuration.
the breakpoints are in several places in handler class BITDetailviewVCHandler class including method downloadBITData.
this method I am calling from BitContentview.XHTML
<wec:commandButton id="bdtexcel" immediate="true" actionListener="#{cc.vch.DownloadBITData}" type="submit" value="#{i18n['invoices.ui.openitems.printSelected']}"/>
When the BIT page is loading the control stops at the breakpoint.
but it is not stopping there when i click the 'Excel Download' button.
How do I get the log file. I am very new to WCEM, please guide me.
I tried to debug the UI using Google chrome. it is giving me the following error.
POST https://<>/<>/<>/<>HomePage.jsf?wec-appid=<>MAINAPP6&wec-locale=en_US 500 (Internal Server Error)
when I expand the node
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:54
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:54
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:66
(anonymous function):<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:30
c.extend.each:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:24 c.fn.c.each:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:66 c.fn.extend.trigger:<>/<>/javax.faces.resource/<>dev/comp.theme/templates/jquery/js/commandButton.js.jsf:31
com.sap.wec.commandButton.submitForm:<>/<>/main/<>HomePage.jsf?wec-appid=<>MAINAPP6&objectID=500000233&page=D61CFFF8E75D48A1B348F315D209EFF9&wec-locale=en_US:48 onclick
Navigated to https://wsapdjd803.<>.ca:<>/<>/main/<>HomePage.jsf?wec-appid=<>MAINAPP6&wec-locale=en_US
Seems to be it is failing somewhere commandButton-related JavaScript functions
Thanks
Subassish -
I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.
Run Disk Utility and try to verify/repair the drive to see if it reports and fixes anything.
-
I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can’t be burned because an unexpected error occurred (error code 0x80020000)
I did burn the same way in MAC OS X 10.6.8. with no troubles!
Can anyone please help me out?
I use for years DVD-R of TDK 4.7GB 16X.Hey topo27,
I would try out the following and see if it helps:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Welcome to Apple Support Communities!
Cheers,
Delgadoh -
I keep getting this error message when I (right-click) on a photo file on my desktop to burn to a CD. I don't understand this code...does anyone? Thanks Ariel**: The disc can’t be burned because an unexpected error occurred (error code 0x80020000).
I tried every obvious solution to this problem with different types of disc (-R; +R; -RW and +RW) and the problem persisted. Then I read about removing a hyphen in picture filenames. I renamed all the images and bingo there were no further problems. Apple should have solved this by now. This error code has been reported for several years and my MacBook Pro is quite new. Anyway, I hope this helps. It does work.
Piggywiggle -
After many hous of "rendering" the message appeared that "--could not be prepared for publishing because an error occurred error code= -34"
re-post in the iMovie forum where all the people that use that software are. This is the Lion 10.7 forum.
-
I took my computer in to have the Backup restored onto my computer after having a new harddrive put onto my 1year 1/2 old MacBook Pro. When i got it home there was a new User that i had to logout of to getting into my normal user. Don't know why this was, just figured the Mac guys that installed my backup did this for some odd reason. Today i could not open any of my files in the backup on the time machine. All the folder had line going thought them and when i clicked on them I revieved this message: can’t be opened because you don’t have permission to see its contents. After talking with that same mac store. I decided to just delete all the files out of the time machine as it was just put back on my computer and i have everything i need. Hours later when i tried to empty the trash i got this messsage: the operation can’t be completed because an unexpected error occurred (error code -8003).
Any advise how to fix my problem?
thanks in advanceWhile you see a single trash can, in reality there are trash folders on each mounted volume. I don't use TM but what you are describing implies that a TM drive is no different with the way trash is treated. So when the TM is unmounted the trash folder on there is gone and thus the trash looks empty. Remount the drive, the trash folder on it now causes the trashcan to look like something is in it.
If TrashIt! could not remove the file, I'm sorry, you will need to use the terminal. We can do this one step at a time so you only have to copy/paste the lines into terminal (except the first time). So launch Terminal (in utilities). You might want to make the window that is shown a bit larger with the grow box since it's pretty small.
This first line is the only exception to the copy/pasting since you have to enter some information.
sudo ls -laR /Volumes/your-TM-volume-name/.Trashes
where your-TM-volume-name is the name of your TM volume. That's the part you have to fill in since I don't know it.
When you hit return the sudo in that command will cause a prompt for your admin password. Enter it and hit return again. Note the password will not be shown as you type it. Post the results so I can tell you what to do next.
Note this ls command is not doing anything but listing the files in the TM's .Trashes folder. Remember I said each drive has it's own trash folder. .Trashes is it. -
I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that. -
I am getting the following error message while trying to configure a database for a Reporting Service Server. Both SQL Server and Reporting server are 2012 named instances. I have 2014 instances as well on the same server.
Exception details...
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running, and then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC server is not listening. (Exception from HRESULT: 0x800706B3)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
Can someone help me on this please?Hi Jaigi,
According to your description, you want to change a report server database for Reporting Services. But it fails on the last step and returns a error. Right?
In this scenario, it seems you are creating a report server database on another server via remote connection. Based on the error message, it has issues on executing the script for generating new database. Please check if you have permission to connect the
server and create a new database. Also please check if the Reporting Services Windows services is working properly.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Backup error occured, Error code 3700 "hostfile_error"
HI,
We are trying to MaxDB database backup to tape and getting below error.
===================================================================================================
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
3,Data backup failed
Servertask Info: because Error in backup task occured
Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
Error in backup task occured, Error code 3700 "hostfile_error"
Backupmedium #1 (
.\pipe\backup) I/O Error
Backup error occured, Error code 3700 "hostfile_error"
===================================================================================================
I went through the previous threads regarding the same error but couldn't find a solution.
System Info is Win 2008, MaxDB version 7.7.07.14.
Here is the complete log, please suggest what can be done.
===================================================================================================
DBA Action starts:
Timestamp: 20110831100408 Function: sda Object: DATA
2011-08-31 10:04:08
Using environment variable 'TEMP' with value 'C:\Windows\TEMP' as directory for temporary files and pipes.
Using connection to Backint for MaxDB Interface.
2011-08-31 10:04:09
Checking existence and configuration of Backint for MaxDB.
Using environment variable 'BSI_ENV' with value 'G:\sapdb\data\wrk\MXP\bsi.env' as path of the configuration file of Backint
Reading the Backint for MaxDB configuration file 'G:\sapdb\data\wrk\MXP\bsi.env'.
Found keyword 'BACKINT' with value 'D:\sapdb\MXP\db\bin\backint.exe'.
Found keyword 'INPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.in'.
Found keyword 'OUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.out'.
Found keyword 'ERROROUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.err'.
Found keyword 'PARAMETERFILE' with value 'G:\sapdb\data\wrk\MXP\maxdb_config.par'.
Found keyword 'ORIGINAL_RUNDIRECTORY' with value 'G:\sapdb\MXP\sapdata'.
Finished reading of the Backint for MaxDB configuration file.
Using 'D:\sapdb\MXP\db\bin\backint.exe' as Backint for MaxDB program.
Using 'G:\sapdb\data\wrk\backint\sapdb.in' as input file for Backint for MaxDB.
Using 'G:\sapdb\data\wrk\backint\sapdb.out' as output file for Backint for MaxDB.
Using 'G:\sapdb\data\wrk\backint\sapdb.err' as error output file for Backint for MaxDB.
Using 'G:\sapdb\data\wrk\MXP\maxdb_config.par' as parameter file for Backint for MaxDB.
Using '300' seconds as timeout for Backint for MaxDB in the case of success.
Using '300' seconds as timeout for Backint for MaxDB in the case of failure.
Using 'G:\sapdb\MXP\sapdata\dbm.knl' as backup history of a database to migrate.
Using 'G:\sapdb\MXP\sapdata\dbm.ebf' as external backup history of a database to migrate.
Checking availability of backups using backint's inquire function.
Check passed successful.
2011-08-31 10:04:09
Checking medium.
Check passed successfully.
2011-08-31 10:04:09
Preparing backup.
Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
Setting environment variable 'BI_REQUEST' to value 'NEW'.
Setting environment variable 'BI_BACKUP' to value 'FULL'.
Constructed Backint for MaxDB call 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.out' as output for Backint for MaxDB.
Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.err' as error output for Backint for MaxDB.
Writing '
.\pipe\backup #PIPE' to the input file.
Prepare passed successfully.
2011-08-31 10:04:09
Starting database action for
the backup.
Requesting 'SAVE DATA QUICK TO '
.\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BackupMXP'' from db-kernel.
The database is working on the request.
2011-08-31 10:04:09
Waiting until database has prepared the backup.
Asking for state of database.
2011-08-31 10:04:09 Database is still preparing the backup.
Waiting 1 second ...
Done.
Asking for state of database.
2011-08-31 10:04:10 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2011-08-31 10:04:10
Starting Backint for MaxDB.
Starting Backint for MaxDB process 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
Process was started successfully.
Backint for MaxDB has been started successfully.
2011-08-31 10:04:10
Waiting for end of the backup operation.
2011-08-31 10:04:10 The backup tool is running.
2011-08-31 10:04:10 The database is working on the request.
2011-08-31 10:04:15 The backup tool is running.
2011-08-31 10:04:15 The database is working on the request.
2011-08-31 10:04:25 The backup tool is running.
2011-08-31 10:04:25 The database is working on the request.
2011-08-31 10:04:40 The backup tool is running.
2011-08-31 10:04:40 The database is working on the request.
2011-08-31 10:05:00 The backup tool is running.
2011-08-31 10:05:00 The database is working on the request.
2011-08-31 10:05:13 The backup tool process has finished work with return code 2.
2011-08-31 10:05:13 The database has finished work on the request.
Receiving a reply from the database kernel.
Got the following reply from db-kernel:
SQL-Code :-903
The backup operation has ended.
2011-08-31 10:05:13
Filling reply buffer.
Have encountered error -24920:
The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
Constructed the following reply:
ERR
-24920,ERR_BACKUPOP: backup operation was unsuccessful
The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
Reply buffer filled.
2011-08-31 10:05:13
Cleaning up.
Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
Reading parameter file G:\sapdb\data\wrk\MXP\maxdb_config.par.
Using staging area D:\TEMP\STAGE1 with a size of 1048576000 bytes.
Using staging area D:\TEMP\STAGE2 with a size of 1048576000 bytes.
Using 2 file per Backint for Oracle call.
Using C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe as Backint for Oracle.
Using G:\sapdb\data\wrk\MXP\initMXP.utl as parameterfile of Backint for Oracle.
Using G:\sapdb\data\wrk\MXP\BackintHistory.txt as history file.
Using G:\sapdb\data\wrk\backint\backint1.in as input of Backint for Oracle.
Using G:\sapdb\data\wrk\backint\backint1.out as output of Backint for Oracle.
Using G:\sapdb\data\wrk\backint\backint1.err as error output of Backint for Oracle.
Using a maximal delay for a Backint for Oracle call of 3600 seconds.
Reading input file G:\sapdb\data\wrk\backint\sapdb.in.
Backing up pipe
.\pipe\backup.
Found 1 entry in the input file.
Starting the backup.
Starting pipe2file program(s).
Waiting for creation of temporary files.
1 temporary file is available for backup.
Calling Backint for Oracle at 2011-08-31 10:05:12.
Calling 'C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\initMXP.
Backint for Oracle ended at 2011-08-31 10:05:13 with return code 2.
Backint for Oracle output:
Backint for Oracle output: Data Protection for SAP(R)
Backint for Oracle output:
Backint for Oracle output: Interface between BR*Tools and Tivoli Storage Manager
Backint for Oracle output: - Version 6, Release 1, Modification 0.0 for Win x64 -
Backint for Oracle output: Build: 358 compiled on Nov 4 2008
Backint for Oracle output: (c) Copyright IBM Corporation, 1996, 2008, All Rights Reserved.
Backint for Oracle output:
Backint for Oracle output: BKI2027I: Using TSM-API version 6.2.3.1 (compiled with 5.3.2.0).
Backint for Oracle output: BKI2000I: Successfully connected to ProLE on port tdpr3ora64.
Backint for Oracle output: BKI0005I: Start of program at: 08/31/11 10:05:12 .
Backint for Oracle output: BKI1216E: There are no backup management classes available.
Backint for Oracle output: BKI1215I: Average transmission rate was 0.000 GB/h (0.000 MB/sec).
Backint for Oracle output: BKI1227I: Average compression factor was 1.000.
Backint for Oracle output: BKI0020I: End of program at: 08/31/11 10:05:13 .
Backint for Oracle output: BKI0021I: Elapsed time: 01 sec .
Backint for Oracle output: BKI0024I: Return code is: 2.
Backint for Oracle output:
Backint for Oracle error output:
Finished the backup unsuccessfully.
#ERROR
.\pipe\backup
End of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
Removed Backint for MaxDB's temporary output file 'G:\sapdb\data\wrk\backint\sapdb.out'.
Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
Backint for Oracle was unsuccessful.
End of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
Removed Backint for MaxDB's temporary error output file 'G:\sapdb\data\wrk\backint\sapdb.err'.
Removed the Backint for MaxDB input file 'G:\sapdb\data\wrk\backint\sapdb.in'.
Have finished clean up successfully.
SAVE/RESTORE request:
SAVE DATA CANCEL
SAVE/RESTORE request accepted:
OK
SAVE/RESTORE result:
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
3,Data backup failed
Servertask Info: because Error in backup task occured
Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
Error in backup task occured, Error code 3700 "hostfile_error"
Backupmedium #1 (
.\pipe\backup) I/O Error
Backup error occured, Error code 3700 "hostfile_error"
DBA Action ends:
Timestamp: 20110831100513 State: Failure
===================================================================================================Hi Markus,
Thanks for quick response. I did checked KNLMSG file and it has XML file kind of information where as dbm.prt has some information and here it is
=================================================================================================
2011-08-31 10:18:30 0x00009ecc INF 1 DBMSrvCo A DBM Server client connection was established at 2011-08-31 10:18:29 (client process has process ID 24352 on computer 10.1.47.21).
2011-08-31 10:18:30 0x00009ecc INF 283 DBMSrv Command 'auto_extend show' is being executed.
2011-08-31 10:18:30 0x00009ecc INF 419 DBMSrv Command 'auto_extend' has ended with return code 0.
2011-08-31 10:18:30 0x00009ecc INF 283 DBMSrv Command 'auto_update_statistics show' is being executed.
2011-08-31 10:18:31 0x00009ecc INF 419 DBMSrv Command 'auto_update_statistics' has ended with return code 0.
2011-08-31 10:18:41 0x00009ecc INF 283 DBMSrv Command 'backup_save "Backup" DATA RECOVERY' is being executed.
2011-08-31 10:18:42 0x00009ecc INF 1 DBMKnl Sending an administrative statement to the database
0x00009ecc INF 8 DBMKnl Statement: SAVE DATA QUICK TO '
.\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
2011-08-31 10:19:47 0x00009ecc ERR 3 DBMKnl Received the result of an administrative statement from the database
0x00009ecc ERR 9 DBMKnl Statement: SAVE DATA QUICK TO '
.\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
0x00009ecc ERR 10 DBMKnl Returncode: -903
0x00009ecc ERR 5 DBMKnl Errortext: Host file I/O error
2011-08-31 10:19:47 0x00009ecc ERR -24580 DBMSrv ERR_COMMAND_FAILED: Command 'backup_save' has ended and failed with return code -24920.
0x00009ecc ERR -24920 DBMSrv ERR_BACKUPOP: backup operation was unsuccessful
0x00009ecc ERR -24778 DBMSrv The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
2011-08-31 10:19:53 0x00009ecc INF 2 DBMSrvCo A DBM Server client connection was released (client process has process ID 24352 on computer 10.1.47.21).
2011-08-31 10:19:53 0x00009ecc INF 1 DBMKnl Sending an administrative statement to the database
0x00009ecc INF 8 DBMKnl Statement: SAVE DATA CANCEL
2011-08-31 10:19:53 0x00009ecc ERR 3 DBMKnl Received the result of an administrative statement from the database
0x00009ecc ERR 9 DBMKnl Statement: SAVE DATA CANCEL
0x00009ecc ERR 10 DBMKnl Returncode: -104
0x00009ecc ERR 5 DBMKnl Errortext: DBM command impossible at this time -
The operation can't be completed because an unexpected error occurred (error code -50)
I have a Seagate Central 3tb NAS (latest firmware) attached to my wireless router (Netgear wndr3400v3). I have a late 2011 macbook pro with Yosemite on it. When I go through finder to use my NAS I keep getting "The operation can’t be completed because an unexpected error occurred (error code -50)" . I only get it when I am trying to copy a big folder with other folders and files with in. I can copy a single file or create folders. If i try to copy a folder with 100 pics in it then I get the error. I can create the folder on the NAS and select all 100 files. When I drag them to the NAS, then they copy with no problems. Every so often my time machine has an error and says that it has to create a new backup. I read some where to make sure that "put hard disk to sleep when possible" should be selected in the energy saver in preferences. Still no luck. A can also drag any file from the NAS back to my laptop or view them from the NAS with no problems.
Thanks for any help in advance.
BillyHi there,
Well I have exactly the same problem! Recently I reset my WD My book White light (2 x 1TB RAID disk), due to the fact that the disk ran full because of TimeMachine.
I reset the disk, and now I can only write some files to it, but most give this error code.
I wrote to WD, but they could not give an answer.
Q: did you update the firmware? Maybe that is causing the problem, in that it is maybe not consistant in the filesystem?
Maybe you are looking for
-
Hi guys, I have a factless fact (indicator and some textual field) that I need to display for previous year. I need somehow to use it in AGO function - I'm getting error message that AGO can only accept aggregated measure. Any ideas?
-
I am unable to save a PDF using "create from scanner" on my iMAC.
I can open Acrobat XI and select "Create from Scanner". The document scans and displays on my screen correctly. But, when I click on "File - Save", the Acrobat window disappears and is replaced with "Problem Report for Acrobat". I have checked, and
-
Hi all , How do I create a separate login screen in Oracle BAM ? It would really be appreciated if any of you guys can help me out in this... regards, Manoj Nair.
-
I installed LR 1.0, and imported photos from Photoshop Elements 5.0.2. The previews in grid view (both normal and extended cells) are updating every time I scroll the view, or start LR. It mean that first I see preview with ugly (pixelated) quality,
-
Adobe reader doesn't open when word is running
my adobe reader won't open when I have word open. It opens fine with other components of the office suite. I have windows 8 on my machine. I have tried running and accepting eula.exe but this had no effect. Any ideas?