Error occurring "opitsk: network error occurred

Hello All,
Platform : Windows-2008Server 32 bit,Oracle10gStandard,OracleFS 3.4
I have two cluster nodes(NPRDB1, NPRDB2) with Microsoft clustering and Oracle Fail Safe. The Oracle database is hosted at a common node PRDB. All my services (including my application’s ) were up and running on primary node. My application’s service connects to the database in NPRDB through a DSN.
Now I have another Server (NRP2) (which is not a node in the cluster) , which also has my application’s service running and it is also connected to the same database on PRDB through a DSN.
A peculiar thing happened when I restarted the NRP2 machine when services were running fine on the cluster nodes.
We started getting database disconnection errors on the Primary cluster node.
Oracle gave the following log : *** 2010-02-21 23:51:02.215 *** SERVICE NAME:(SYS$USERS) 2010-02-21 23:51:02.200 *** SESSION ID:(45.60) 2010-02-21 23:51:02.200 opitsk: network error occurred while two-task server trying to send break; error code = 12571
Windows Event Log on Primary Node
Oracle MSCS Service : Oracle Fail Safe successfully took resource PRDB offline
Error on Standby Cluster Node:
Cluster resource 'PRDB' in clustered service or application 'NPRDB' failed.
Any pointers or reason for the above problem?
Edited by: user5865877 on Mar 4, 2010 7:25 AM

12571, 00000, "TNS:packet writer failure"
// *Cause: An error occurred during a data send.
// *Action: Not normally visible to the user. For further details, turn
// on tracing and reexecute the operation. If error persists, contact
// Oracle Customer Support.

Similar Messages

Opitsk: network error occurred while two-task server trying tosend break

Problem Description: Environment Details
Application Server : Version 10.1.2.3.0 on Windows Server 2003 R2
Database Server: I have installed Oracle DB (11.2.0.1.0) on the same sever having Oracle 11g Release 1 (11.0.7.0) and Oracle 10g Release 2 (10.2.4.0).
I am using Oracle11gR1 listener for all three databases.
I have created database for Oracle11gR2 with no issues at all.
Issue:
Now when I am running my application using Oracle11g R2, my application runs fine for a specific interval after which I get ORA-03113: end-of-file communication channel. All the Sessions linked to these are all dead.
From the logs I discovered this (which is TNS Packet write failure)
opitsk: network error occurred while two-task server trying tosend break; error code = 12571

Any clue based on the Trace file???????????
Part of DB Trace (As Trace was very Big)
===========================
2010-10-25 17:11:35.143380 : nioqrs:exit
2010-10-25 17:11:35.143394 : nioqrs:entry
2010-10-25 17:11:35.143405 : nioqrs: state = interrupted (1)
2010-10-25 17:11:35.143415 : nscontrol:entry
2010-10-25 17:11:35.143425 : nscontrol:cmd=45, lcl=0x0
2010-10-25 17:11:35.143436 : nscontrol:normal exit
2010-10-25 17:11:35.143446 : nscontrol:entry
2010-10-25 17:11:35.143456 : nscontrol:cmd=1, lcl=0x0
2010-10-25 17:11:35.143467 : nscontrol:normal exit
2010-10-25 17:11:35.143477 : nioqsm:entry
2010-10-25 17:11:35.143487 : nioqsm: Sending break packet (1)...
2010-10-25 17:11:35.143498 : nscontrol:entry
2010-10-25 17:11:35.143513 : nscontrol:cmd=45, lcl=0x0
2010-10-25 17:11:35.143524 : nscontrol:normal exit
2010-10-25 17:11:35.143535 : nsdo:entry
2010-10-25 17:11:35.143546 : nsdo:cid=0, opcode=67, bl=1, what=17, uflgs=0x100, cflgs=0x3
2010-10-25 17:11:35.143558 : nsdo:rank=64, nsctxrnk=0
2010-10-25 17:11:35.143569 : nsdo:nsctx: state=8, flg=0x400c, mvd=0
2010-10-25 17:11:35.143580 : nsdo:gtn=156, gtc=156, ptn=10, ptc=2047
2010-10-25 17:11:35.143591 : nsdofls:entry
2010-10-25 17:11:35.143601 : nsdofls:DATA flags: 0x0
2010-10-25 17:11:35.143611 : nsdofls:normal exit
2010-10-25 17:11:35.143622 : nsdo:sending NSPTMK packet
2010-10-25 17:11:35.143632 : nspsend:entry
2010-10-25 17:11:35.143642 : nspsend:plen=11, type=12
2010-10-25 17:11:35.143653 : nttwr:entry
2010-10-25 17:11:35.143668 : ntt2err:entry
2010-10-25 17:11:35.143680 : ntt2err:soc 3116 error - operation=6, ntresnt[0]=530, ntresnt[1]=54, ntresnt[2]=0
2010-10-25 17:11:35.143691 : ntt2err:exit
2010-10-25 17:11:35.143702 : nttwr:exit
2010-10-25 17:11:35.143712 : nspsend:0 bytes to transport
2010-10-25 17:11:35.143722 : nspsend:transport write error
2010-10-25 17:11:35.143733 : nspsend:error exit
2010-10-25 17:11:35.143743 : nsdo:error sending NSPTMK packet
2010-10-25 17:11:35.143754 : nserror:entry
2010-10-25 17:11:35.143766 : nserror:nsres: id=0, op=67, ns=12571, ns2=12560; nt[0]=530, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
2010-10-25 17:11:35.143778 : nsdo:nsctxrnk=0
2010-10-25 17:11:35.143788 : nsdo:error exit
2010-10-25 17:11:35.143799 : nioqsm:send-break: failed to send break...
2010-10-25 17:11:35.143810 : nioqper: error from send-marker
2010-10-25 17:11:35.143821 : nioqper: ns main err code: 12571
2010-10-25 17:11:35.143832 : nioqper: ns (2) err code: 12560
2010-10-25 17:11:35.143842 : nioqper: nt main err code: 530
2010-10-25 17:11:35.143853 : nioqper: nt (2) err code: 54
2010-10-25 17:11:35.143864 : nioqper: nt OS err code: 0
2010-10-25 17:11:35.143874 : nioqsm:exit
2010-10-25 17:11:35.143884 : nioqer:entry
2010-10-25 17:11:35.143895 : nioqer: incoming err = 12152
2010-10-25 17:11:35.143905 : niomapnserror:entry
2010-10-25 17:11:35.143915 : niqme:entry
2010-10-25 17:11:35.143927 : niqme:reporting NS-12571 error as ORA-12571
2010-10-25 17:11:35.143937 : niqme:exit
2010-10-25 17:11:35.143947 : niomapnserror:exit
2010-10-25 17:11:35.143957 : nioqce:entry
2010-10-25 17:11:35.143967 : nioqce:exit
2010-10-25 17:11:35.143977 : nioqer: returning err = 12571
2010-10-25 17:11:35.143987 : nioqer:exit
2010-10-25 17:11:35.143998 : nioqrs:nioqrs: Couldn't send break. returning 12571
2010-10-25 17:11:35.144009 : nioqrs:exit
opitsk: network error occurred while two-task server trying tosend break; error code = 12571
2010-10-25 17:11:35.145131 : nioqds:entry
2010-10-25 17:11:35.145149 : nioqds: disconnecting...
From Apps Server
================
[2010/10/25 4:41:1:141] Debug 50103 (JobObject:readExternal): err.errorString=MSG-00003: HES1201 STARTED 2010-OCT-25 15:28:44 Report RCXXX Rev 12.0
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-03113: end-of-file on communication channel
Edited by: user12889416 on 31-Oct-2010 22:24

Getting error in SM21

Dear All,
we are usinf ecc6 on windows with ms cluser on2 active server and oracle 10g.
In sm21 i am getting the workprocesses was restarted many times. the disp log DpHdlDeadWp: restart wp (pid=1328) automatically and WARNING => ThHdlReconnect: no reconnect in hold mode
Please suggest
              A1 0 Initialization complete
              Q0 Q Start Workproc 1, Pid 1508
              Q0 Q Start Workproc26, Pid 2280
              Q0 Q Start Workproc27, Pid 4584
              Q0 Q Start Workproc 2, Pid 8588
              Q0 Q Start Workproc31, Pid 8948
         BY 4 Database error 3135 at SEL access to table REPOSRC
         BY 0 > ORA-03135: connection lost contact
         BY M SQL error 3114 occurred; work process in reconnect status
         AB 2 > Include ??? line 0000.
         AB 0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
         BY M SQL error 3114 occurred; work process in reconnect status
         BY 4 Database error 3135 at FET access to table KNBW
         BY 0 > ORA-03135: connection lost contact
         BY M SQL error 3114 occurred; work process in reconnect status
         BY M SQL error 3114 occurred; work process in reconnect status
         BY 4 Database error 3135 at SEL access to table DYNPLOAD
         BY M SQL error 3114 occurred; work process in reconnect status
         BY 0 > ORA-03135: connection lost contact
         BY 4 Database error 3135 at SEL access to table STXL
         AB 0 Run-time error "DBIF_REPO_SQL_ERROR" occurred
         AB 0 Run-time error "DYNPRO_READ_FAILED" occurred
         AB 2 > Include ??? line 0000.
         AB 0 Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
         AB 0 Run-time error "DBIF_SETG_SQL_ERROR" occurred
         BY 2 Database error 3114 at EXE
         AB 2 > Include ??? line 0000.
         AB 0 Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
         BY 0 > ORA-03114: not connected to ORACLE
         AB 2 > Include LKKBLF90 line 2354.
         AB 0 Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
         BY 2 Database error 3114 at FET
         BY 0 > ORA-03114: not connected to ORACLE
         BY 2 Database error 3114 at FET
         BY 0 > ORA-03114: not connected to ORACLE
   R4 7 Delete session 001 after error 024
   R4 7 Delete session 001 after error 024
   BY Y Work process has left reconnect status
   BY Y Work process has left reconnect status
        R4 7 Delete session 001 after error 061
        R4 7 Delete session 001 after error 061
A1 0 Initialization complete
Q0 Q Start Workproc 8, Pid 6104
Q0 Q Start Workproc20, Pid 9836
R4 7 Delete session 001 after error 061
Tue Jun 29 10:28:41 2010
ORACLE V10.2.0.4.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows Server 2003 Version V5.2 Service Pack 2
CPU                 : 4 - type 2200, 4 Physical Cores
Process Affinity    : 0x0000000000000000
Memory (Avail/Total): Ph:8857M/16362M, Ph+PgF:42422M/75999M
Instance name: prd
Redo thread mounted by this instance: 1
Oracle process number: 49
Windows thread id: 6786, image: ORACLE.EXE (SHAD)
2010-06-29 10:28:41.182
ACTION NAME:(20784) 2010-06-29 10:28:41.152
MODULE NAME:(SAPLSEDA) 2010-06-29 10:28:41.152
SERVICE NAME:(SYS$USERS) 2010-06-29 10:28:41.152
SESSION ID:(1286.11696) 2010-06-29 10:28:41.152
opitsk: network error occurred while two-task server trying tosend break; error code = 12571
disp log
Tue Jun 29 11:24:42 2010
Network error of client T125, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T125 is ip)
LOG Q04=> DpRTmPrep, NiBufReceive (10613RFCL-C125 ff-0e30fdb1a) [dpxxdisp.c   12363]
RM-T125, U10613, 600 USER, ff-0e30fdb1a8fc, 11:22:40, M0, W1, VF03, 2/1
Tue Jun 29 11:25:40 2010
DpHdlDeadWp: restart wp (pid=7732) automatically
Tue Jun 29 11:25:49 2010
SoftCancel request for T59 U10425 M0 received from REMOTE_TERMINAL
Tue Jun 29 11:28:40 2010
DpHdlDeadWp: restart wp (pid=5644) automatically
Tue Jun 29 11:31:20 2010
DpHdlDeadWp: restart wp (pid=1328) automatically
DpHdlDeadWp: restart wp (pid=2872) automatically
DpHdlDeadWp: restart wp (pid=3284) automatically
trc file: "dev_disp", trc level: 1, release: "701"
sysno      01
sid        PRD
systemid   561 (PC with Windows NT)
relno      7010
patchlevel 0
patchno    96
intno      20020600
make:      multithreaded, Unicode, 64 bit, optimized
pid        7968
Tue Jun 29 12:20:21 2010
DpHdlDeadWp: restart wp (pid=8016) automatically
Tue Jun 29 12:21:13 2010
ERROR => multiple send of tid 54 (HW, M0) [dpxxdisp.c   12519]
Network error of client T54, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T54 is .249)
LOG Q04=> DpRTmPrep, NiBufReceive (10982HW india ) [dpxxdisp.c   12363]
RM-T54, U10982, 600HW, india, 12:20:25, M0, W1, ZVA0, 2/1
HardCancel request for T54 U10982 M0 received from DISPATCHER
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   7498]
LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5711]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 6526): [dpxxdisp.c   5713]
-IN-- sender_id REMOTE_TERMINAL   tid 54    wp_ca_blk   1       wp_id -1
-IN-- action    SEND_TO_WP        uid 10982   appc_ca_blk -1      type DIA
-IN-- new_stat NO_CHANGE         mode 0     len         33      rq_id 49074
Tue Jun 29 12:21:21 2010
DpHdlDeadWp: restart wp (pid=5888) automatically
Tue Jun 29 12:25:01 2010
DpHdlDeadWp: restart wp (pid=3040) automatically
trc file: "dev_w0", trc level: 1, release: "701"
there are many
Tue Jun 29 12:26:12 2010
WARNING => ThHdlReconnect: no reconnect in hold mode
Tue Jun 29 12:28:11 2010
WARNING => ThHdlReconnect: no reconnect in hold mode
WARNING => ThHdlReconnect: no reconnect in hold mode
MTue Jun 29 12:28:12 2010
WARNING => ThHdlReconnect: no reconnect in hold mode
WARNING => ThHdlReconnect: no reconnect in hold mode
Tue Jun 29 15:55:05 2010
build_stmt: reallocating stmt buffer: 3005 -> 4008 characters
build_stmt: reallocating stmt buffer: 4008 -> 5022 characters
build_stmt: reallocating stmt buffer: 256 -> 2000 characters
Please suggest
Regards,
Kumar
Edited by: kumar9 on Jul 1, 2010 3:50 PM

Hi,
Check OSS Notes
504952 - Composite note regarding spooling and printing
48400 - Reorganization of TemSe and Spool
41547 - How does report RSPO0041 work?
16083 - Standard jobs, reorganization jobs
You have to schedule the background job to run the report RSPO1041 to delete old spool.
Hope this will help you.
Thanks,
Shambo

Generating trace file in udump

Hi,
Database is 10.1.0.5 on windows 2003. There is trace file getting generated in udump which says:
opitsk: network error occurred while two-task session server trying to send break; error code = 12152
Thanks

I'm getting the same since patching from 10.1.0.5 patch 2 to patch25 when connecting over PL/SQL Developer and quering with large resultsets:
PL/SQL Dev query session lost on large resultsets after db update
Did you solve your problem ?

PL/SQL Dev query session lost on large resultsets after db update

We have a problem with our PL/SQL Developer tool (www.allroundautomations.nl) since updating our Database.
So far we had Oracle DB 10.1.0.5 Patch 2 on W2k3 and XP-Clients using Instant Client 10.1.0.5 and PL/SQL Developer 5.16 or 6.05 to query your DB. This scenario worked well.
Now we upgraded to ORACLE 10G 10.1.0.5 PATCH 25 and now our PL/SQL Developer 5.16 or 6.05 (on IC 10.1.0.5) can logon the db and also query small tables. But as soon as the resultset reaches a certain size, the query on a table won't come to an end and is always showing "Executing...". We can only press "BREAK" what the results in a "ORA-12152: TNS: unable to send break message" and "ORA-03114: not connected to ORACLE".
If i narrow the resultset down on the same table it works like before.
If i watch the sessions on small resultset-queries, i see the corresponding session, but on large resultset-queries the session seem to close immediately.
To solve this issue a already tried to install the newest PL/SQL developer 7.1.5(trail) or/and installing a newer instant client version (10.2.0.4), which both did not solve the problem.
Is there a new option in 10.1.0.5 Patch 25 (or before) which closes sessions if the resultsets getting to large over a slower internet connection?
btw. using sqlplus in the instantclient directory or even excel over odbc on the same client, returns the full resultset without problems. Could this be some kind of timeout problem ?
Edit:
Here is a snippet of the tracefile on the client right after Executing the select-statement. Some data seems to be retrieved and than it ends with these lines:
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 2D 20 49 6E 74 72 61 6E |-.Intran|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 65 74 2D 47 72 75 6E 64 |et-Grund|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 6C 61 67 65 6E 02 C1 04 |lagen...|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 02 C1 03 02 C1 0B 02 C1 |........|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 51 00 02 C1 03 02 C1 2D |Q......-|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 05 48 4B 4F 50 50 01 80 |.HKOPP..|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 03 3E 64 66 01 80 07 78 |.>df...x|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 65 0B 0F 01 01 01 07 76 |e......v|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: C7 01 01 09 01 01 07 76 |.......v|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: C7 01 01 18 01 01 07 78 |.......x|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 65 0B 0F 01 01 01 07 76 |e......v|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: C7 01 01 09 01 01 07 76 |.......v|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: C7 01 01 18 01 01 02 C1 |........|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 3B 02 C1 02 01 80 00 00 |;.......|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 00 00 00 00 00 00 00 00 |........|
(1992) [20-AUG-2008 17:13:00:953] nsprecv: 00 00 01 80 15 0C 00 |....... |
(1992) [20-AUG-2008 17:13:00:953] nsprecv: normal exit
(1992) [20-AUG-2008 17:13:00:953] nsrdr: got NSPTDA packet
(1992) [20-AUG-2008 17:13:00:953] nsrdr: NSPTDA flags: 0x0
(1992) [20-AUG-2008 17:13:00:953] nsrdr: normal exit
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: entry
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: acquired the bit
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: normal exit
(1992) [20-AUG-2008 17:13:00:953] snsbitcl_ts: entry
(1992) [20-AUG-2008 17:13:00:953] snsbitcl_ts: normal exit
(1992) [20-AUG-2008 17:13:00:953] nsdo: what=1, bl=2001
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: entry
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: acquired the bit
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: normal exit
(1992) [20-AUG-2008 17:13:00:953] nsdo: nsctxrnk=0
(1992) [20-AUG-2008 17:13:00:953] snsbitcl_ts: entry
(1992) [20-AUG-2008 17:13:00:953] snsbitcl_ts: normal exit
(1992) [20-AUG-2008 17:13:00:953] nsdo: normal exit
(1992) [20-AUG-2008 17:13:00:953] nioqrc: exit
(1992) [20-AUG-2008 17:13:00:953] nioqrc: entry
(1992) [20-AUG-2008 17:13:00:953] nsdo: entry
(1992) [20-AUG-2008 17:13:00:953] nsdo: cid=0, opcode=85, bl=0, what=0, uflgs=0x0, cflgs=0x3
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: entry
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: acquired the bit
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: normal exit
(1992) [20-AUG-2008 17:13:00:953] nsdo: rank=64, nsctxrnk=0
(1992) [20-AUG-2008 17:13:00:953] snsbitcl_ts: entry
(1992) [20-AUG-2008 17:13:00:953] snsbitcl_ts: normal exit
(1992) [20-AUG-2008 17:13:00:953] nsdo: nsctx: state=8, flg=0x100400d, mvd=0
(1992) [20-AUG-2008 17:13:00:953] nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: entry
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: acquired the bit
(1992) [20-AUG-2008 17:13:00:953] snsbitts_ts: normal exit
(1992) [20-AUG-2008 17:13:00:953] snsbitcl_ts: entry
(1992) [20-AUG-2008 17:13:00:953] snsbitcl_ts: normal exit
(1992) [20-AUG-2008 17:13:00:953] nsdo: switching to application buffer
(1992) [20-AUG-2008 17:13:00:953] nsrdr: entry
(1992) [20-AUG-2008 17:13:00:953] nsrdr: recving a packet
(1992) [20-AUG-2008 17:13:00:953] nsprecv: entry
(1992) [20-AUG-2008 17:13:00:953] nsprecv: reading from transport...
(1992) [20-AUG-2008 17:13:00:968] nttrd: entry
Message was edited by:
vhbtech

Found nothing in the \bdump alert.log or \bdump trace files. I only have the DEFAULT profile and everything is set to UNLIMITED there.
But the \udump generates a trace file the moment i execute the query:
Dump file <path>\udump\<sid>ora4148.trc
Fri Aug 22 09:12:18 2008
ORACLE V10.1.0.5.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Oracle Database 10g Release 10.1.0.5.0 - Production
With the OLAP and Data Mining options
Windows Server 2003 Version V5.2 Service Pack 2
CPU : 2 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:898M/3071M, Ph+PgF:2675M/4967M, VA:812M/2047M
Instance name: <SID>
Redo thread mounted by this instance: 1
Oracle process number: 33
Windows thread id: 4148, image: ORACLE.EXE (SHAD)
*** 2008-08-22 09:12:18.731
*** ACTION NAME:(SQL Window - select * from stude) 2008-08-22 09:12:18.731
*** MODULE NAME:(PL/SQL Developer) 2008-08-22 09:12:18.731
*** SERVICE NAME:(<service-name>) 2008-08-22 09:12:18.731
*** SESSION ID:(145.23131) 2008-08-22 09:12:18.731
opitsk: network error occurred while two-task session server trying to send break; error code = 12152
This trace is only generated if the query with a expected large resultset fails. If i narrow down the resultset no trace is written, well and the query then works of course.

Connection session lost with first action after connection

Hello,
I have a problem with a website. After authentification when i do any action (go to another page) i am directly redirected to site home page with lost of session. Session track on this site are made by cookies.
The problem is present only with firefox on windows 7. I have no problem with other browser. And for windows XP it work fine.
When i start firefox in WinXP or WinVista compatibility mode i don't have the problem.
Any one have an idea ?
Thanks.

Found nothing in the \bdump alert.log or \bdump trace files. I only have the DEFAULT profile and everything is set to UNLIMITED there.
But the \udump generates a trace file the moment i execute the query:
Dump file <path>\udump\<sid>ora4148.trc
Fri Aug 22 09:12:18 2008
ORACLE V10.1.0.5.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Oracle Database 10g Release 10.1.0.5.0 - Production
With the OLAP and Data Mining options
Windows Server 2003 Version V5.2 Service Pack 2
CPU : 2 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:898M/3071M, Ph+PgF:2675M/4967M, VA:812M/2047M
Instance name: <SID>
Redo thread mounted by this instance: 1
Oracle process number: 33
Windows thread id: 4148, image: ORACLE.EXE (SHAD)
*** 2008-08-22 09:12:18.731
*** ACTION NAME:(SQL Window - select * from stude) 2008-08-22 09:12:18.731
*** MODULE NAME:(PL/SQL Developer) 2008-08-22 09:12:18.731
*** SERVICE NAME:(<service-name>) 2008-08-22 09:12:18.731
*** SESSION ID:(145.23131) 2008-08-22 09:12:18.731
opitsk: network error occurred while two-task session server trying to send break; error code = 12152
This trace is only generated if the query with a expected large resultset fails. If i narrow down the resultset no trace is written, well and the query then works of course.

TNS-12571 packet writer failure

Hi,
Oracle Database 10.2.0.1 on Windows Server 2003 V5.2
A few weeks the datbase works fine.
In the last night, oracle crashs / the listener (???)
In the trace-file I can read:
"optisk: network error occurred while two-task server trying to send break; error code = 12571"
TNS-12571:TNS:packed writer failure
Anybody here who can tell me what could cause this behaviour ?
Temporary network-problems ???
Kind regards,
Walter Laurentius

In an earlier log-file/other computer I found the same text:
*** 2006-06-22 17:02:26.546
*** ACTION NAME:() 2006-06-22 17:02:26.531
*** MODULE NAME:(OEM.SystemPool) 2006-06-22 17:02:26.531
*** SERVICE NAME:(VLR04) 2006-06-22 17:02:26.531
*** CLIENT ID:() 2006-06-22 17:02:26.531
*** SESSION ID:(197.248) 2006-06-22 17:02:26.531
opitsk: network error occurred while two-task server trying to send break; error code = 12571
It's a resourcen-problem??
Thanks.
Walter

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

I rented a movie via Itunes on my PC but half-way through the download recieved a "An unknown error has occured (-50)" notification. This is not my first rental, and I have verified my network and all connections to be good. Will I still be charged?

I rented a movie via Itunes on my PC but half-way through the download recieved a "An unknown error has occured (-50)" notification. This is not my first rental, and I have verified my network and all connections to be good. I have rebooted Itunes and resumed the download of the movie only to receive the same error code. Has the movie file been corrupted? Can I recover the rental even though the time has elapsed? Will I be charged?

Did you figure this out? I haven't rented a movie in this new iTunes yet and saw one tonight I wanted to rent. Same fricken thing is happening to me. I hate this new iTunes, and I really hate that there are problems like this....why the heck do they have to fix something that isn't broken and break it? This just really stinks.

Cannot delete itunes from pc,message states. a network error occurred while attempting to read from the file C:\windows\installer\itunes.msi

ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
MESSAGE, READS a network error occured while attempting to read from the file C:WINDOWS\installer\iTunes.msi

All sorted now just needed to repair itunes from control panel

A network error occurred while accessing this document on the internet

Dear all,
I am now facing a very unusual problem that, when I try to open a pdf file from internet, it says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?". Here's my situation:
Browser: IE8 (or Chrome 35.0.1916.153)
Adobe Reader: 11.0.0
OS: Win7
1.Directly open from IE. Says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?"
2.Try to download(Save AS). In IE, says: "The connection was reset The connection to the server was reset while the page was loading"; In Chrome, nothing happened, but still can't download.
3.Try to disable the "PDF Reader Addon" in IE8. First the browser needs to download the PDF file, but failed, see point 2.
1.I can open the same PDF file from another network, that is, out of my company.
2.I can open another PDF file in the network of my company, but the pdf is created by another scanner
3.All PDFs from both scanner can be opened locally.
So, here's the possible problem, the network settings, and(or) the PDF. Does anyone ever meet this situation, please help?
Thank very much.
Li

Rave,
IE: 8 & 9
Adobe Acrobat Pro/Acrobat Reader 10.x & 11.x
Chrome: work fine
So the answer is to manually enable and disable websites based on whether the pdfs open within the browser. That doesn't seem like a great long-term solution to have have our users to manually enable / disable browser integration. We have web applications that work better with browser integration turned on. Is this something that Adobe will fix or is it an IIS/IE issue.
It appears the Adobe removed the #1 config option that you lised in the new 11.x versions of both products. The manage Add-ons does not disable the browser integration on the new Adobe versions.

Azure Webjobs with EF DB - A network-related or instance-specific error occurred while establishing a connection to SQL Server

Hi,
I have been trying to get a very simple WebJob developed and deployed onto Azure with little to no luck. I have a MVC Website which has a common project which handles my Data Access Layer with Entity Framework. I have created a WebJob project
using Visual Studio and added the following lines of code to the Manual Trigger Function
[NoAutomaticTrigger]
public static void ManualTrigger(TextWriter log, int value, [Queue("queue")] out string message)
RitualDBEntities db = new RitualDBEntities();
log.WriteLine("Function is invoked with value={0}", value);
List<Location> locations = db.Locations.ToList();
string msg = string.Empty;
foreach (Location location in locations)
msg += location.Name;
message = msg;
log.WriteLine("Following message will be written on the Queue={0}", message);
In my app.config of my WebJob i have the following connection strings:
<add name="RitualDBEntities" connectionString="metadata=res://*/RitualDBEntities.csdl|res://*/RitualDBEntities.ssdl|res://*/RitualDBEntities.msl;provider=System.Data.SqlClient;provider connection string="data source=ritual-pc\sqlexpress;initial catalog=RitualDB;integrated security=True;persist security info=False;MultipleActiveResultSets=True;App=EntityFramework"" providerName="System.Data.EntityClient" />
<add name="RitualContext" connectionString="Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=RitualDB;Data Source=ritual-pc\sqlexpress" providerName="System.Data.SqlClient" />
<add name="AzureWebJobsDashboard" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****"/>
<add name="AzureWebJobsStorage" connectionString="DefaultEndpointsProtocol=https;AccountName=ritual***;AccountKey=tQAP0gyMYKtWPJeIbsqk2iT2k69gyd1FwcyRf3+5Mc9b9EdYzpj0Dq8X2VHUmF*****" />
When i test locally (F5 Debugging) the webjob runs successfully and does the loop of the objects returned from the database. When i deploy this Azure the WebJob fails with the following error:
[03/29/2015 22:07:39 > 6ca05b: SYS INFO] Status changed to Initializing
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Run script 'Ritual.WebJobs.Members.exe' with script host - 'WindowsScriptHost'
[03/29/2015 22:07:41 > 6ca05b: SYS INFO] Status changed to Running
[03/29/2015 22:07:44 > 6ca05b: INFO] Found the following functions:
[03/29/2015 22:07:44 > 6ca05b: INFO] Ritual.WebJobs.Members.Functions.ManualTrigger
[03/29/2015 22:07:44 > 6ca05b: INFO] Executing: 'Functions.ManualTrigger' because This was function was programmatically called via the host APIs.
[03/29/2015 22:08:01 > 6ca05b: INFO] Function had errors. See Azure WebJobs SDK dashboard for details. Instance id is e99d7205-3ca0-4674-9414-f0381d5c2316
[03/29/2015 22:08:01 > 6ca05b: ERR ]
[03/29/2015 22:08:01 > 6ca05b: ERR ] Unhandled Exception: System.Data.Entity.Core.EntityException: The underlying provider failed on Open. ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.SqlClient.SqlConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.<Open>b__36(DbConnection t, DbConnectionInterceptionContext c)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.InternalDispatcher`1.Dispatch[TTarget,TInterceptionContext](TTarget target, Action`2 operation, TInterceptionContext interceptionContext, Action`3 executing, Action`3 executed)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Infrastructure.Interception.DbConnectionDispatcher.Open(DbConnection connection, DbInterceptionContext interceptionContext)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.<Open>b__2()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.<>c__DisplayClass1.<Execute>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute(Action operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of inner exception stack trace ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.EnsureConnection(Boolean shouldMonitorTransactions)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<>c__DisplayClass7.<GetResults>b__5()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Core.Objects.ObjectQuery`1.<System.Collections.Generic.IEnumerable<T>.GetEnumerator>b__0()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Data.Entity.Internal.LazyEnumerator`1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Functions.ManualTrigger(TextWriter log, Int32 value, String& message)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at lambda_method(Closure , Object[] )
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.VoidInvoker.InvokeAsync(Object[] arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithWatchersAsync>d__23.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithOutputLogsAsync>d__1c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<ExecuteWithLogMessageAsync>d__c.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.FunctionExecutor.<TryExecuteAsync>d__1.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.Host.Executors.ExceptionDispatchInfoDelayedException.Throw()
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.<CallAsyncCore>d__7.MoveNext()
[03/29/2015 22:08:01 > 6ca05b: ERR ] --- End of stack trace from previous location where exception was thrown ---
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Microsoft.Azure.WebJobs.JobHost.Call(MethodInfo method, Object arguments)
[03/29/2015 22:08:01 > 6ca05b: ERR ] at Ritual.WebJobs.Members.Program.Main()
[03/29/2015 22:08:01 > 6ca05b: SYS INFO] Status changed to Failed
[03/29/2015 22:08:01 > 6ca05b: SYS ERR ] Job failed due to exit code -532462766
If i remove any of my database code and use just the basic Stub code my webjob will run successfully so i know that my connection strings (outside of the DB ones) are correct. My MVC web application also runs perfectly using the same connection strings
in Azure so i also know that they have also been configured.
I am now lost and need some guidance, so if someone is able to assist me that would be much appreciated.
Thanks
Ritual.

Can you try to log the connection string you are using in both cases to make sure they are the same?
Also can you share your site name, either directly or indirectly?
This will help us investigate.
Thanks,
Amit

TS1424 I am having issues downloading music from iTunes, it comes up saying an unknown error has occurred - please check your network connection. Now I can connect to iTunes store and have itunes as an exception for downloads so don't know what else to do

Hello, I've started having an issue downloading songs and apps from iTunes to our PC which has Windows XP Professional installed. We also use Karspersky Anti-Virus and Firefox as an internet browser. Have never had this issue before, it comes up with "An unknow error has occured and downloads are stopped with an error 8003. Also says please check your network connection" We have no issue connecting to iTunes store or the network so not sure how to fix this. It is very frustrating. Have checked Windows Firewall and iTunes is an exception, can't think of anything else why it won't work.

I sounds as though you need to start again. The following article tells you how to completely remove iTunes and Quicktime. If you didn't actually install iTunes you wont find it in add/remove programs so you can't do that bit, but still delete the iTunes folder in Program Files as advised in the article.
http://docs.info.apple.com/article.html?artnum=93698
Once you have got rid of them, try installing the latest version of iTunes. There is a link to it in the article.
Itunes wont move your music for you, get iTune sgoing then ask again.

A network error occurred while trying to communicate with the server.

Hello All,
I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
In console I'm seeing these errors when I try to access various services:
2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

A connection timeout occurred. I have been receiving this error when trying to connect to the open wifi connection at my university. My wifi works perfect when I am using it on my home network. I have tried all the suggestions in forums online no luck.

I am getting a connection timeout occurred message on my mid-2009 macbook pro I am running mountain lion 10.8.2 but problem occured before and after update. The message only happens when i attempt to connect to the wifi at my university. It works normal at my home. This error just started last semester out the blue. I have read many forums and non have helped ive reset my pram a few times, ive deleted all my networks including my home network out of my system preferences<network and all that extra stuff. if anyone has a clue please help me because one of my classes requires me to take in class test over the internet. Thanks for reading. If anyone can help PLEASE help ive been trying to fix for last few months.

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

Error occurring "opitsk: network error occurred

Similar Messages

Maybe you are looking for