Error occurs when set up middleware to new ERP system

Hi,
We are chainging ERP system to upgrade ERP  version.
So we must set up  middleware newly on CRM system(CRM 5.0).
so, I made new RFC destination and site..and another middleware setting.
The other initial download is succeed. But when I download the DNL_CUST_PROD1 to get product
hierarchy, this error message occured..-> "Hierarchy R3PRODHIER may only be changed in the original system <system name> ".
And I found the note about this symptom.(Note 369684)
But at this note, I can not find the solution. (or I could not understand the solution.)
I think that I should do the solution No. 4.
As solution No 4, I checked transaction COMM_PRAPPLCAT.  Sales application is set to R3PRODHIER. I deleted the sales application. and downloaded again. But this error occured again.
I think I shoul delete R3PRODHIER hierarchy at the transaction COMM_HIERARCHY. But I can not do that.
How should I do?
And I think that I do not understand the solution of Note 369684.
So..please tell me the solution easyly.
Edited by: WON BUM LEE on Sep 26, 2008 10:15 AM

I found the solution. As the note 369684 turn off detective of error message.
At the first time, I didn't do that because that is for CRM4.0. But it is work on the CRM 5.0.

Similar Messages

  • EIC Authentication-Error occurred while data was read from your ERP system

    Hi everybody,
    hope someone can help me with this issue in a EP 7.0 Portal (SP 08):
    In ESS --> Personal Information --> EIC Authentication when I click on the service, I get the following message in roadmap step 1 (overview), :
    "An error occurred while data was read from your ERP system. Contact your system administrator."
    I appreciate your help! Thanks and best regards,
    Jasmin

    Hi,
    Found similar threads.It ma help u.
    /message/3652173#3652173 [original link is broken]
    /message/3652594#3652594 [original link is broken]
    Regards,
    Manoj.

  • Error occurs when i try to download new Os6

    Everythime I try to do the new update it says "error occurred" on my iphone 4,,,i rebotted but still they same happens. Any suggestions?

    Follow the steps here: http://support.apple.com/kb/TS3925

  • The following error occured when searching for on-premises exchange server

    I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
    did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
    When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
    No problems - [email protected]
    Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
    Add a user account and assign a user role
    Getting "Unexpected error occurred" when Setting up an e-mail account for user
    Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
    The user account is created ok just no e-mail address is created for the user
    I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
    When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
    The following error occurred when searching for the On-Premises Exchange server
    When I try to open Microsoft Exchange Management Shell, I get a similar error
    I've download & run EMTShooter which just identifies there is an error & gives me the same error
    I've installed & re-installed WinRM IIS Extensions
    I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
    Still cannot connect to Exchange
    I've trawled through the internet for two days checking & testing every solution but no luck
    I've checked every setting against another Windows SBS 2011 Server we've installed & works
    I cannot find a difference
    Can someone help me or point me in the right direction?
    Peter Ralphs

    Thanks for the reply Cara
    Here's the original error I was getting when opening Exchange Management Console
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I got similar error when trying to access the Exchange Management Shell
    VERBOSE: Connecting to SERVER.myd.local
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],                          
    PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionOpenFailed
    When I opened the Exchange Management Console this week, the error had changed slightly
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
    see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
    This is the result of the Health Check Scan
    Organization: First Organization
    Default Global Address List Changed
    The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
    -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
    -eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
    Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
    The default public folder database is remote
    The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
    Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
    Server: SERVER
    Disk timeout changed
    Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
    Client RPC binding found
    The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
    One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
    Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
    I also noticed that the Health Check stated that "The default public folder database is remote"
    Has this something to do with it ?
    Regards
    Peter

  • Error occurs when creating a new destination in HCI OData Provision Administration

    Hi,
    An error occurs when creating a new destination in HCI OData Provision Administration.
    Please see the screen shot in attachment.
    Any help will be appreciated!
    Thanks,
    Li-hua

    It's the same issue as in MissingResourceException when trying to create a destination. Changing the destination name should do the trick.
    (still looking for the GWaaS colleagues to fix the original issue.)

  • Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

    Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

    Hi 99jon,
    Many thanks for that. Had been going through this list yesterday and now again today:
    Ref  Solution 1: Lightroom is at its latest update
    Ref  Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
    Ref  Solution 3: Lightroom doesn't allow me to do anything after the error message appears
    Ref  Solution 4: don't have any Nik Software plug-ins
    Ref  Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
    Ref  Solution 6: I don't have a different user account on my mac.
    Not sure what else to do.

  • Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types.  You do not have enough access privileges for this operation." How to fix?

    After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player.  It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types."  I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem.  Any suggestions?  Thanks.
    J

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • Error message when setting up Road Runner Email on my new Macbook Pro

    I get the following error message when setting up my RR account. 
    Logging in to the neo.rr.com POP server “pop-server.neo.rr.com” failed. Make sure the user name and password you entered are correct, then click Continue. If the information isn’t correct, you cannot receive messages.
    I go to the next steps and everything looks like it should. 
    Help

    Hello Jen,
    Congratulations on your new MacBook Pro!  I understand how important is to have your email account setup on your new computer. I found a couple of resources that I think might help.
    You can check the Mail Setup Assistant for the server settings for common email providers.  I recommend checking your email settings here first to verify they match what you have in the Mail application:
    Mail Setup Assistant
    https://www.apple.com/support/macosx/mailassistant/
    If the Mail Setup Assistant does not provide settings for your email account, you can use the following article when contacting your email service provider to gather the necessary information to setup your account:
    Configuring Mail for your email account
    http://support.apple.com/kb/HT1277
    If you are able to setup your account but messages are not being downloaded, I recommend reviewing the following article:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error occur when download new version of Air application

    Hi All,
    Error occur when download new version of Air application.
    the error is given below
    "There was an error downloading the update. Error# 16824"
    Please help me
    Regards,
    Abhilash S

    If on windows, take a look at the following file to see what's going on:
    c:\Document and Settings\User Name\Local Settings\Application Data\Adobe\logs\Install.log
    Common issues:
    The version number specified in the application.xml file of the download is not the same as the value specified in the update.xml file.
    The application ID of the new file is not the same as that in the old file.
    At any rate, the probable in most probably due to an invalid value in the application descriptor file.

  • Operation could not be completed because an error occured when creating frame 56 (error-1)

    Hi
    I'm trying to export a movie in motion but I keep getting the error "Export Failed. The operation could not be completed because an error occured when creating frame xx (error-1)".  I've tried some of the other suggestions such as preventing app nap, changing the codec used and I've uninstalled, rebooted, and reinstalled motion.  Nothing has worked so far, and it's driving me crazy!
    Can anyone suggest something?  I'd be most grateful.
    Thanks

    Hi GFXZen, thanks for your reply.
    I actually solved by re-exporting the source video, but I'll get to that (to skip, see TL;DR).  In case it helps anybody else I'll answer your questions first.
    The only element present at the majority of the failure points was another video, so there weren't any others to turn off.  Though when I turned off the video and exported, it actually worked (this is what led me to evaluate the source video rather than the motion project).
    Adjusting the export settings did not help me much, I tried h.264, same as source (which  was a .mov), and ProRes 4444: failed.  Tried as a draft: failed.  I didn't want to mess with any of the other render settings because to be honest, I'm not a video editor, so my experience with all of this is severely limited.
    I forgot to mention in the first post that I'd already tried the export on a different machine (one far newer and more powerful): failed.  Dispite googling image sequences, I wasn't really sure how this related to the video, or how to set things up so the audio was preserved, so I skipped that.
    TL;DR
    According to what I googled, it sounded like the video needed to be reindexed/exported/whatever, so I downloaded a program MPEG Streamclip (http://www.squared5.com/svideo/mpeg-streamclip-mac.html) 1.93b8 (as  the stable doesn't support Lion upward).  It's completely free, and when I ran it, worked first time.  I simply opened the video and exported to quicktime, and changed the compression to Apple TIFF.  That was it. 
    There was one unusual thing though, the file I started with was just over 1GB, but the end result was just over 4GB - but visually I couldn't see any loss in quality at all, and it worked in the motion project - which is really all that matters.
    Hope this helps somebody.

  • An unknown error occurred when Dreamweaver tried to connect to this Contrib

    Hello all,
    I just started having a Dreamweaver problem that's perplexing me...
    I have 2 machines, a G4 and a G5 both running Dreamweaver ( I have MX2004 and 8 on both machines, this problem effects both versions on the G5 only).
    Everything was humming along just fine until the other day when suddenly I was receiving error messages on my G5 stating
    "An unknown error occurred when Dreamweaver tried to connect to this Contribute site".
    Then my local folder containing the website that I was working on would go gray (in Dreamweaver) and lose it's folder icon. It would still look like it was there, just no icon. When I would click on the drop down triangle it would state, " The local root folder, (and the folders name), does not exist. Please select a new local folder by clicking the Manage Sites button".
    I then ran a couple of tests on the G4 and it connected fine, I was able to edit, upload/download, everything as usual. I then attempted to connect to the site with Transmit on the G5...no problem.
    In the site definition I remembered that it may be set up to work with Contribute sites, but this was not the case, the box was unchecked.
    I then had the idea to export the site key from the G4 and grab it onto the G5 and import it into Dreamweaver...I did this AND IT WORKED! Once...after that back to the 2 usual errors.
    I found a work around for now...do my editing/site building in Dreamweaver, and upload with Transmit...this works fine...I've found that the errors only happen AFTER I've connected with the site(s). I've tried this with the other sites I maintain and it was the exact same thing.
    Are there any similar experiences out there? This has really got me stumped... can't imagine what it is.
    Any help would be greatly appreciated.
    thanks
    G5 Dual 2, G4 Dual 1.4 GHZ, iBook Graphite SE   Mac OS X (10.4.4)  

    my firewall is off, everything worked up until a couple days ago when it randomly stopped working

  • Lightroom: "An error occurred when attempting to change modules."

    I'm a first time Lightroom(via the Cloud) user (used Capture One before this) and just downloaded it today. The first thing I saw was this error message
    "An error occurred when attempting to change modules."
    I've updated it to 4.3 and I've tried all the other recommendations I found here:
    http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom.html
    I don't know what Nik products are but I don't believe I have any.
    I'm on a Mac running 10.6.8
    Removed this preference file I found here:
    http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html
    So frustrating! Please, can anyone help me???

    I can only quote from the webpage that you already visited RE: Permission.
    You need to have full permission for reading and writing for the folders and drives that Lr is using - particularly the folder that contains the catalog (i.e. the database Lr is working with).
    If you have full permission try re-installing Lr. Un-install it via your OS. And re-install it.
    Also, occasionally downloaded programs can become damaged during download - for instance when the download has been interrupted.
    Before you re-install, I'd recommend that you download Lr again and use this second download for re-installation.
    From the webpage (particularly read the part about Macs):
    Solution 5: Set correct permissions on Lightroom folder inside Application Support  
    The Lightroom folder inside Application Support could have the wrong permissions preventing Lightroom from writing to it which can cause this error.
    Navigate to the following folder: /Users/[user name]/Library/Application Support/Adobe/Lightroom
    Highlight the Lightroom folder and chose File > Get Information
    Under Sharing & Permission, verify that your have Read & Write Privileges. If not, click the padlock icon at the lower right, enter your password when prompted, then click the Read only entry and select Read & Write.
      Important: (Mac OS) Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you need access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.
    Solution 6: Try a different user account.
    Copy the Lightroom folder into a new user account or other existing account on your computer. Then, restart Lightroom. The Lightroom folder is in the following locations:
    Windows XP: C:\Documents and Settings\[user name]\Application Data\Adobe\
    Windows 7, Vista: [user name]\AppData\Roaming\Adobe\
    Mac OS: [user name]/Library/Application Support/Adobe/
    Important: (Mac OS) Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you need access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

  • Error Occurred when creating frame (Error -1)

    I have been working on a project in Motion 5 and recently on my 2009 MBP Intel Core 2 Duo and recently upgraded to an Core i7. I transferred all the project files and media over to the new machine but now when I export I get the error message  "The operation could not be completed because an error occurred when creating frame 346 (error -1).
    I've updated the OS (Mountain Lion) and Motion to the latest versions on both my old MBP and the new one.
    I've spent hours creating this and bought the new machine to get quicker render/export times but now it will not even export at all.
    I'm using a .mov file throughout my project which is at 30 FPS, but my Motion project is set at 24fps, could this be the cause? It didnt seem to matter on the project I was doing on my old MBP.
    Any advice would be great. Thanks

    What version is this? Are you using 10.0.9?

  • Another "An error occurred when attempting to change modules" error

    Hello all:
    After using Adobe Photoshop Lightroom on Mac OSX trouble free for the past 6 months, I opened up Lightroom today and received the following error: "An error occurred when attempting to change modules." I had not made any changes in between when it worked normally and when the error started to occur. I beleive the last thing I did before this error occurred was to go into the Print Module.
    Other information--I keep all my RAW .NEF files on an external Firewire (800) 750 GB drive. This is on Mac OS X 10.5 running Adobe Photoshop Lightroom 1.3 and also with 1.4.1. I'm running an iMac 20" with dual-core 2.2 Ghz Intel processors and 4 GB of RAM. I have around 25k images total.
    When I noticed this problem, I was on Lightroom 1.3. I immediately upgraded to 1.4.1, which did not solve the problem. I have also tried many suggestions in the forums including uninstalling the application and removing the .plist file.
    I thought I had come up with a solution by creating a new catalog, then importing the former into it. While this seems to work immediately after the import process, as soon as I close it, the problem manifests itself again.
    More details that may or (likely) may not help:
    - Going to the Develop and Print Modules gives me no problems. However, when I click on Library, Slideshow, or Web, I see the error.
    - I upgraded my Mac to the latest patch level after observing this error to no avail.
    So it looks like my choices are to create a new file and reimport every single time, or lose all of the work I've done for the past 6 months on thousands of images.
    Can anyone please help???? I promise to post the solution when we fix this darn thing so others may benefit. I'd be happy to run through any troubleshooting that y'all would suggest outside of switching to a Canon.
    Thanks!!!!
    Matt

    I'd first check for the existence of a file ending in .lock, which should be present when LR is in use, but if it exists when LR is quit, it can cause problems, and should be deleted.
    Please post back your results.

  • PL/SQL: ORA-04052: error occurred when looking up remote object.

    Hi All,
    I'm getting the following error message while executing a PL/SQL Block.
    PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
    ORA-00604: error occurred at recursive SQL level 1
    ORA-03106: fatal two-task communication protocol error
    ORA-02063: preceding line from FTSStatement
    declare
    v_coun number;
    begin
    select count(*) into v_coun
    from updluser.filestatushistory@fts;
    end;Back ground of the situation as follows,
    My DataBase version 10.2.0.3 DB Name :DB1
    Table Owner : UPLDUSER
    Table Name : FILESTATUSHISTORY
    I have a report user on the same database and I have grant all on the above table to report user
    Report User : RPT_FTS
    SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
    Database version : 9.2.0.8
    DB Name : DB2
    User Name : RPT_REPORTS
    I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
    but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Now the strange about this is that I have Created a new table on DB1 db like below;
    SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
    To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
    SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
    Just wants To know what whould have been the cause for this .
    Cheers
    Kanchana

    Hi Kanchana,
    Perhaps following link of google search has answer to your query
    ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
    HTH!
    *009*

Maybe you are looking for