Error of PO - "Purchase Order Does not exists"
Dear Experts,
Here i am facing one error of Purchase Order Creation and its further processing.
I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders).
When, i am posting Goods Receipt for the PO, system is issuing the error message, Purchase Order does not exists.
Also in ME2M (PO list display) and Me23N (Display PO),
system is issuing the same message - Purchase Order Does not exists, but in PO Creation it is generating Purchase order normally.
Here is no matter of release strategy, because, PO release is not configured.
Dear Experts, Please guide me on the issue !
Thanks in advance !!!!
there can be hundred of different reason for a failure. Most common reason is a problem with the number ranges, e.g. system tries to create a record with a number that is already there.
This can happen if the number range was reset (or transported from a developement system).
But transaction SM13 gives you all the details.
There you see a line for each posting failure. Double click this line again to get more details.
There you will certainly find a line in red that indicates in which function the failure ocured.
Double click this red line to get more info. Use the buttons above to see the content of the posting. For some failures you can create a dump that gives you much more details.
Best you sit together with an ABAPer who can certainly tell you more how to read a dump and how to find the reason.
Similar Messages
-
40000006573 purchase order does not exist
hi
40000005673 purchase order does not existtrue, it doesn't exist in my system either...
Please spend a LITTLE more time on your..question if you expect help
if I had to support you in this case the first thing I would do would be to double check that the number you entering is correct
me23n
migo
If you know the number is correct and you get the same error from both t-code I would believe the message
if the number may be incorrect search for the correct number with me2n, many options to refreence for P.O. search with me2n -
Receiving Error in Shopping Cart : Order Does not exist
Hi
While creating Shopping Cart and click Insert From Clipboard button, I am receiving " Order xxxx does not exist (Item yyy ).
Please tell me why I receive this error and what causes and possible fixes to this?
Details:
The scenario I am doing is I have a webdynpro ABAP application which copies Value, Cost Center, OR Cost objects in to Clipboard.
now when I go to Shopping card - > descrive requirment -> Cost assignment section-click Insert From ClipBoard - throws below error: "Order xxxxxx does not exist (Item yyyy)"
Indeed OR cost objects which are valid in the SRM system and every OR line is seen as invalid by SAP with above error message. Please explain
Thanks
Praveen
Edited by: Praveen kumar Kadi on Jun 21, 2011 9:16 AMHi,
Thnaks for your reply.
Actually manual copy To clipboard works fine from Shopping Cart. when we use webdynpro application to copt to Cliboard with same data it doesn't work. So I believe the key to debug SRM Shopping Cart-> CopyToClipBoard functionality like how the values have been copied to from shopping cart. So that we can compare Shopping Cart->CopyToClipboard value with Webdynpro CopyToClipBoard values.
How to find what and which values and in which format copied from shopping Cart-CopyToCliboard.? Anyway to see this in debug.
Please help with some screenshots/debug screens.
thanks
Praveen -
MIGO error 'Purchase Order does not contain a confirmation control key'
Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarityHi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro -
'Purchasing document does not exist' error while testing Inbound PO Idoc
Hi experts,
i am working on Inbound PO Idoc scenario. I am testing Idoc in WE19 with ORDRSP mesage type.
Idoc type:ORDERS05
Process code:ORDR
FM:IDOC_INPUT_ORDRSP
while trying to create PO it is giving an error 'Purchasing document does not exist' in we05.
please suggest me how to resolve this???
Regards,
Bhuvan.Hi,
first time i am testing this IDoc and i don't find any field in Idoc structure to provide purchase order value.
any more inputs plz??
regards,
bhuvan. -
Error "Account assignment 00 for purchase document does not exist " when u
Hai,
I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
The error says " account assignment 00 for purchasing document does not exist".
The scenario is very simple. I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10. Tax code is U2 ( 7% tax).
I am passing the following at header level.
Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
Does this error has got any thing to relate configuration matters?
Regards,
UpenderHi Upender,
In some cases, depending on the type of PO / Posting,
you might have to populate the accounting data itab and pass in the BAPI parameter.
you can select the accounting data from EKKN for the PO.
Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
Thanks,
Ram -
Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before. -
FTXP-error-Domain MWART fixed value does not exist- Message no. F4341
Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
and enter values that represent the tax code for input tax which are
encountering the problem.
KALSM (tax procedure)
MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
This should only have a value "V" to represent input tax (or "A" if
output tax).
5) The cause of the error F4 341 is when this column does not contain
any value or is blank. Which means that there is no defined tax type
"A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
corresponding tax codes and complete all the customizing settings
relating to tax on sales and purchases thereunder. Afterwhich you
should no longer experience the error message.
Regards,
REnan -
Phases/operation in process order does not exist
phases/operation in process order does not exist this error coming when cor6n is using.why?
HI
After creating Master recipe in C201, under the operations tab you need to define the operations involved in recipe . along with the operation column there is phase indicator column is there which is to be selected whether this operation is phase or not...
Check and revert
Regards
Anupam Sharma -
Error 1070023 Configured Disk volume does not exist.
Hi
I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
Error 1002097 Unable to load database Basic.
The App log showed the following error
Error 1070023 Configured Disk volume does not exist.
Please help..So everything works when the volume is set to E?
If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems... -
Error 1075: The dependency service does not exist or has been marked for deletion
Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support -
Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advancedIn which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The phone company was here working on something while I was gone. They sat down at my computer (iMac) and since then HDR toning doesn't work. Get the code: Error 48: File or folder does not exist. Line: 11 -> $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx"); How can this be fixed?
Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).
-
HDR Toning Error 48: File or Folder Does Not Exist
After migrating to a new computer HDR Toning is no longer available.
I get a pop-up: Error 48: File or Folder Does Not Exist
Line 11 -> $. evalFile(g_StackScriptFolderPath + "StackSupport.jsx");
What's the fix for this, if anyone knows?
Thanks.Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).
-
Ruler Tool- Error 48: File or folder does not exist
I am trying to use the new RULER TOOL in CS5 (64-bit mode) running 10.6.4 and I get the following error:
Error 48: File or folder does not exist.
Line: 31
-> $.evalFile( g_StackScriptFolderPath + "Geometry.jsx");
Any ideas?i'm getting the exact error using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
HELP!!!
someone
hello ... anyone out there?
how do we get support for this error?
e
Maybe you are looking for
-
Is there a way for the 5s to HOST CONTROL devices via Lightning or otherwise?
So I asked this question in the regular Apple forum because I am trying to help a company why is not very Apple savvy figure out how to offer the same level of control they offer on Android devices with the iPhone 5, 5c and 5s. They realize there are
-
How can I find out who has had unauthorised access to my iCloud account
I have received an email to say that someone has accessed my iCloud account. How can I find out details of who has done this ?
-
Installing Adobe Creative Suite CS6 on Windows from a disc
I purchased Adobe Acrobat Suite CS6 for Windows. The disc came with an insert with a 24 digit number. When I try to install the program it doesn't accept the 24 digit number as a serial number nor as a redemption code. What am I missing? Please h
-
How do I get Monaco 10pt in Snow Leopard to Lion?
Monaco 10pt in Snow Leopard was my favorite TextEditor and Terminal font: It doesn't look very good here because the image is scaled and I believe it was a bitmap font. I've just upgraded to Lion and its Monaco 10pt looks completely different: Is the
-
hi BDC Masters, i have a scree vith 2 fields VAR1 AND VAR2. in VAR1 = 05 and VAR2 = AM and i get the values...into my internal table I-CREATE i am using BDC and passing all my INTERNAL TABLE VALUES to the BDC where it displays all the values that a