Error of the consolidation package

Hi Expert,
when i ran the consolidation package, I got the error message
RUN_LOGIC:Data for category C_100 not found in application LEGALAPP
My consolidation logic
*RUN_PROGRAM CONSOLIDATION
CATEGORY = %C_CATEGORY_SET%
GROUP = %GROUPS_SET%
TID_RA = %TIME_SET%
*ENDRUN_PROGRAM
What am I missing ?
Also, what else do the consolidation logic do besides running the automatic adustment rule, will the balance of individual entity copied to the group level ?
Moreover, if i don't have any adjustment within the group, do i need to setup the Automatic adjustment business rule, it seems that if i don't set it up, I got the following error message
RUN_LOGIC:Elimination not found for consolidation type * in Group dimension
Thanks in advance
Don

Hi Expert,
Now i changed to another period for running, i got the message
0  SUBMITTED, 0  SUCCESS, 0  FAIL.
My scenario is
All the account balance is stored at group NON_GROUP (load from BW cube)
and i input some journal at group G_HA
The consolidated result should be the summation of NON_GROUP and G_HA as there is no other adjustment and all of the entities are 100% ownership. I have set up the OWNERSHIP application. I wonder to know how can i get the consolidated result ?
Thanks
Don

Similar Messages

  • Error while running CONSOLIDATION package

    Hi all
    I am getting error message during CONSOLIDATION package run time and the error message has been attached as blow
    EEROR:
    sFileContent><![CDATA[]]></sFileContent><ErrorMsg><![CDATA[ Cannot find document/directory]]></ErrorMsg>
    Thanks in advance for your help
    Ramana

    Hi,
    Please check if the scriptlogic file is properly saved and it has the same name as in the data manger (data manger--> advance).
    Try doing a validate and save on your logic file.
    regrads
    SSC

  • Weird Title and other errors concerning the ActiveX Packager Screen

    Hi,
    Here's what I get when I run the Packager (using both 1.1.1 and 1.3 instructions)
    The window pops up, saying something like "JavaBeans Bridge for ActiveX Packager version null", with the title of the frame being "frame.title".
    For some JARs, I get the NullPointerException after the first step. For others, it works fine, but after I place the control in my VB Project and try to save or run it, the program crashes.
    As well, when I tried to add the "beans.ocx" control back into my list of Components (it was already listed, I don't know why), I get an error saying that my ActiveX Control has not been registered as an ActiveX Control!
    I also cannot locate swingall.jar. I don't think I have it and I don't know where to download just that JAR file.
    Any help will be gladly appreciated.
    Thanks,
    cindybubbles

    Well, here's an update: I was able to load an ActiveX Control made from simple Java code that took no files.
    However, I am still having problems with integrating that OCX with the MediaPlayer from javax.media.bean.playerbean and Player from javax.media.
    I am also having problems with incoporating sound from java.applet. I am, therefore, left with no choice but to leave the file handling to VB.
    I'm going to test this theory by displaying images now.
    cindybubbles

  • I have a problem with word. I trashed it yesterday by mistake. So I downloaded once again the office software 2011 package but it still doesn't work. Everytime I try to open a document it says "error" and the office package appears twice on my taskbar

    This is what it says
    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_BAD_ACCESS
    Date/Time: 2014-02-23 07:52:59 +0000
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 14.2.0.120402
    Crashed Module Name: libobjc.A.dylib
    Crashed Module Version: unknown
    Crashed Module Offset: 0x000044a7
    Blame Module Name: MBURibbon
    Blame Module Version: 14.3.9.131030
    Blame Module Offset: 0x0001007c
    Application LCID: 1040
    Extra app info: Reg=en Loc=0x0410
    Crashed thread: 0

    You might want to try asking your Office for Mac question in the Office for Mac forums located here: http://answers.microsoft.com/en-us/mac

  • Error using the Business Package ESS

    Hi folks, am a bit new with Enterprise Portals, and we are having this kind of error when trying to update record in IT06(HCM).
    Data record 0001635000061      2001102919980101000 has grouping value "" instead of "10"
    Data record 0001635000061      2002123120011030000 has grouping value "" instead of "10"
    Data record 0001635000061      2003051320030101000 has grouping value "" instead of "10"
    Data record 0001635000061      9999123120030514000 has grouping value "" instead of "10"
    This is using the BP ESS/MSS, where can i find how this error is occuring?
    Thanks,
    André

    Are you working on the US payroll?
    Looks like some issue with regards to the address.
    Where exactly do you get this error?
    regards,
    Sandeep

  • Error while running legal consolidation package RUNCONSOL

    Hi All
    I have below error while i run the consolidation package can anyone throw light on the same
    Start time --->5:17:46 PM  -  Date:1/6/2009  (build code:254)
    User:BPCDEV\bpcadmin
    Appset:FTIL
    App:LEGALAPP
    Logic mode:1
    Logic by:
    Scope by:
    Data File:
    Debug File:D:\BPC\Data\WebFolders\FTIL\LEGALAPP
    ..\AdminApp\LEGALAPP\LegalConsolidation.txt
    Logic File:D:\BPC\Data\WebFolders\FTIL\LEGALAPP
    ..\AdminApp\LEGALAPP\LegalConsolidation.lgx
    Selection:D:\BPC\Data\WebFolders\FTIL\LEGALAPP\PrivatePublications\bpcadmin\TempFiles\FROM_81_.TMP
    Run mode:1
    Query size:0
    Delim:,
    Query type:0
    Simulation:0
    Calc diff.:0
    Formula script:
    Max Members:
    Test mode:0
    Is Modelling:1
    Number of logic calls:1
    Call no. 1, logic:D:\BPC\Data\WebFolders\FTIL\LEGALAPP
    ..\AdminApp\LEGALAPP\LegalConsolidation.lgx
    Building sub-query 1
    Query Type:0
    Max members:
    Executing SPRUNCONSO [LEGALAPP], [ACTUAL], [C_FTILG], [SPSCOPE_200127],[SPLOG_282986]
    SPRunConso Version 2.06
    ERROR CSD-015 No instruction retreived from the ELIM Table with FLOW Dimension
    Time to run stored procedure:1.6 sec.
    call 1 completed and data posted in 1.6 sec.
    Run completed in 1.8 sec.
    End time --->5:17:48 PM  -  Date:1/6/2009
    SPRunConso Version 2.06
    ERROR CSD-015 No instruction retreived from the ELIM Table with FLOW Dimension
    Thanks and Regards
    Harish B K

    Hi this was due to not maintaining proper design and it was solved later once we setup all the parameters perfectly
    and had time dimension members for one year prior (though seems strange)

  • Error occurred while running the consolidation of Investment

    Dear Friends,
    when i runn the consolidation package, I got the error message : "RUN_LOGIC:Data for category C_100 not found in application CONSOLIDATION"
    CONSOLIDATION APPLICATION is nothing but my LEGAL application.
    My consolidation logic is:
    *RUN_PROGRAM CONSOLIDATION
    CATEGORY = %C_CATEGORY_SET%
    GROUP = %GROUPS_SET%
    TID_RA = %TIME_SET%
    *ENDRUN_PROGRAM
    What am I missing in the above script?
    Running of Currency Conversion is successfully completed and updation of Ownership is also maintained.
    Thanks in advance
    MD.
    Edited by: Mah2007 on Nov 25, 2011 9:48 AM

    Hi Aidan,
    Thanks for your reply.
    as per note I change the status of Property IS_CONSOL but still is showing the same error.
    Is because of while uploading the data I can use the INPUT schedule and the status of the IS_CONSOL is not updated with "Y"
    Can you please guide the same.
    Thanks MD.

  • Lega consolidation package error

    Hi experts,
    We are executing the legal consolidation package and we get next error: 
    "Accounts and entities do not match data in application OWNERSHIP failed"
    We have entered the ownershipdata, but the "ultimate ownership calculation" package did nothing, so we guess that is the problem.
    Did it happen to anybody? How can we solve the problem?
    Regards.

    David and Jorge,
    Thanks a lot for your reply.
    Yes, we followed the procedure decribed in the How To Paper on NW Consolidation.
    I will create the message tomorrow. Strange, that there is still no reply from SAP to your message. It is time to escalate the issue.
    Were you able to run calculation of Group Shares (CALCOWN) before execution of the Consolidation Package?
    There are various sources of information on the function:
    On the help.sap.com
    "The calculation of PCTRL in the business rule table is supported as same as itu2019s in BPC5.1, however the automatic calculation scripts of PCTRL (% of control) from investor/investee ownership percentage is not supported in the BPC 7.0 version for NetWeaver, so This means the user mustneed manually input the PCTRL % into the ownership application in order to use it for further calculations."
    How To Paper
    Step4: Run the pre-delivered DM package u201CCalculate Ultimate Ownershipu201D to calculate the ultimate ownership that how much each consolidation group own on each entity. As a result that write back after calculation, the ultimate ownership is stored under the member  u201CI_NONEu201D of IntCo dimension, and POWN, PGROUP, METHOD member has the group-own-entity value
    described above.
    Traing Materials:
    Ultimate ownership is a function for legal consolidation used to perform certain calculations used by he application (primarily in regard to calculating the group share of a subsidiary). This information is needed by the business rule library to
    properly consolidate the operations of various subsidiaries in accordance with GAAP.
    Customers may decide to also enter the direct and indirect pown values instead of having the system derive them.
    The concusion is that we can enter Group POWN data manually. We can execute the function, we get a message "Could not write the transaction data successfully. No data found.' Do you have the same problem?
    The second question is whether we need to enter PCTRL?
    Best regards,
    Mila

  • Consolidation package multiply the amounts introduce on group currency

    Dear Experts,
    When we run the Consolidation Package twice, consolidation amounts
    on consolidation group are multiplied base on the number of groups each
    entity belong to.
    We modified the DataSrc property IS_CONVERTED as a previous post suggests
    then everything looks ok but the amounts introduced on Group Currency.
    Parameterization for the data sources used for group currency manual
    adjustments is:
    - DataSrc Type: M
    - IS_CONSOL: Y
    - IS_CONVERTED: G
    We tried to modify the property IS_CONVERTED to u201CYu201D, the amounts are
    erased because nothing is posted on LC, as expected. If we change the
    property to u201CNu201D, the amounts are not copied to the Group, it means no
    consolidated.
    Any solution? It only happens with the amounts introduced on Group Currency, but at consolidated level, I mean the amount on group currency remains ok, but consolidated value for this amounts it duplicated, any idea why? Someone indentiy any lack on the parametrization?
    Thank and regards,
    Iria

    Hi again,
    To limit the problem, the multiplied amounts are the ones introduced on Group Currency only. But the problem doesn't have any relation with the Currency Conversion, because it is done perfectly.
    As a work around, we are deleting all the consolidated figures before run the Automatic Adjustments again, but the performances is not sustainable (more than 1 hour).
    Thanks and regards,
    Iria

  • BPC 7.5 CONSOLIDATION Package

    Hi team,
    Issue:
    To execute the consolidation Package SAP delivered the Package with default promts as Category/RptCurrency/Time.
    But my scenario for consol is to execute consolidation at group level. So I ahve changed the prompts in data manager package to Category/Group/Time.
    If try accessing the package directly from BPC excel, package promoting with prompts as category/Group/Time.
    But if I try accessing the package using BPF, system is promoting Category/RptCurrency/Time.
    May be it is taking prompts from standard process chain not from front end.
    Any one figuring the same problem in BPC NW 7.5?
    How to make BPF to take prompts from front end.???
    Thanks and regards
    Naveen Vaddi

    Make sure your  have correct MDX statements in 'consolidation' logic as well.
    Make sure the 'group' dimension members are correctly defined.

  • Legal Consolidation package is automatically getting CANCELLED

    Hi Experts,
    I am trying to run the Legal Consolidation dtsx package which triggers the Consolidation.LGF script logic, but i am getting a strange cancellation message. It is automatically getting cancelled and when i look onto the log it shows Package - Running.
    Does anyone have a clue on this ?
    regards,
    Samveer

    Hi Fred,
    You will need to provide screenshots of your parameter setting or type it out in the message for legal app and ownership applications.  If not set properly, the message status you experienced is a typical norm. 
    The next step you need to check is the ownership application to ensure that you have the appropriate ownership structure setup for the period.
    If you believe that you have set up everything appropriately, then scale back your ownership structure to a minimum to make sure that you can run the Consolidations package/process chain (automatic adjustments) to get the desired result.  From there, you can build up your structure and test them to ensure expected results.
    Are you on SP2 or SP3?
    -Ken

  • The declared package does not match the expected package

    I was given some Java code that I need to get working and then make some improvements on, but I'm still in the process of learning Java and the IDE Eclipse as well. There is a package called MyGUI and most of the files in that package had the error "The declared package MyGui does not match the expected package MyGUI" as a result of the inconsistent case, so I changed all of the first lines "package MyGui" to "package MyGUI" and this fixed all of those problems except for one.
    There is still one file where it gives this error message even though I changed the code the same way I did for the other files. I can't figure why this file is different. I saved it and I also refreshed everything, but it still gives me the error message "The declared package MyGui does not match the expected package MyGUI" although the package is clearly declared as "MyGUI".
    Does anyone have an idea of why this would be? I am very new to Eclipse and Java, so I don't really know how to go about solving errors yet.

    Forget the IDE until you get a handle on basic concepts like packages and classpath.
    The error you're talking about comes when a .java or .class file is not in a directory that matches its declared package.
    Let's say that CLASSPATH_ROOT is the only element in your classpath. If you have a class that is declared like so:
    package com.foo;
    class Bar {}Then, you must have CLASSPATH_ROOT/com/foo/Bar.java or CLASSPATH_ROOT/com/foo/Bar.class.
    The language rules for .java files are not as strict as those for .class files, but some compilers may expect them to be the same, and it's a good idea to do so even if it's not strictly necessary, for clarity's sake.
    Also, even though Windows' file system is not case sensitive--that is it considers FOO.class and foo.class the same file name--Java is. You probably can't directly rename FOO.java to Foo.java in Windows, as it will say it's the same name, so if you need to change the case, rename it to a different name, than back to Foo with the correct case.
    Edited by: jverd on Mar 29, 2009 12:07 PM

  • "The selected package file requires an InDesign document that cannot be found."

    Hello,
    I often get this error message "The selected packaged file requires an InDesign document that cannot be found.  How do you want to continue?" when opening in InDesign CS5.5
    My options are "Browse to locate this document." and "Save the contents of the package to disk."
    When I selected "Browse to locate this document." and I located the appropriate InDesign file, it prompts me to browse for the file again.  Its a never ended cycle.
    I'm not sure how to solve this problem.  I'm not familiar with the procedure if I "save the contents of the package to disk."  Can someone help me out with this?
    Thanks!

    Well, there’s your answer. Pretty simple…don’t do that.
    But if the damage has been done, you can change the extension of the idap file to zip and unzip the contents. You’ll find all the updated InCopy stories there.
    Overwrite the ones on your harddrive and you should be good to go.
    Bob

  • Error in running Legal COnsolidation Package

    Hi All,
    On running the legal consolidation package i am constantly getting the same error which is :
    'RUNLOGIC:Dimension Set: "ENTITYDATAVALUE" not assigned in Data manager'
    I have checked all the dimensions and it all seems to be proper. I tried altering the input of data manager to include ENTITY dimension but the manager did not run at all.
    Please help me out. if anyone encountered the same error and has countered it pls share how to do so..
    Regards
    Navin

    Hi,
    I think you are using %ENTITY_SET% in your script. However, you are not prompting for the entity member in the DM package. You need to add the entity dimension in the prompt statement of the advanced script of the DM packge.
    Hope this helps.

  • Error in the phase IMPORT_PROPER while applying support packages

    Dear All,
    I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
    I have successfully applied the kernel patch and started applying the support packages,  i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
    ========================================================================================================
    START imp all              SCD        20081229080538              DDIC         sealcpro 20081229080537
    INFO: event SAP_IMPORT_START triggered successfully
    INFO  TBATG CONVERSION OF  SCD N      not needed                  DDIC         sealcpro 20081229080537
    START tp_getprots          SCD P      20081229080539              DDIC         sealcpro 20081229080537
    2EETP000 sap_dext called with msgnr "1":
    2EETP000      db call info
    2EETP000 function:   db_setget
    2EETP000 fcode:      RT_SETB (65535)
    2EETP000 tabname:    TRBAT
    2EETP000 len (char): 0
    2EETP000 key:
    2EETP000 retcode:    1
    1AETP000 exit in function texitnow
    ERROR: EXIT(16) -> process ID is: 5319
    STOP  imp all              SCD   0016 20081229080602              DDIC         sealcpro 20081229080537
    =========================================================================================================
    And also when i look at the Support package import logs they show that
    TEST IMPORT
    Import ABAP Dictionary Objects and
    ABAP Dictionary Activation phases ended with return code 4
    But i dont think this can give any problem.
    I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
    I had to start SAP and only then i was able to connect to the SERVER again.
    Can you please help me on this..
    For any more information plz let me know
    Thanks and regards
    Hunky

    Dear Balaji,
    Thank you very much for the reply...
    I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
    But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
    ===================================================================
    DBIF_REPO_INTERNAL_ERROR
    Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
    An unspecified internal error occurred in the SAP-internal
    database interface.
    For further analysis the SAP system log should be examined
    (transaction SM21).
    Check the entries in the developer trace of the relevant work process
    (transaction ST11).
    Attempted to access component "LOAD" of program
    "CX_SY_OPEN_SQL_DB=============CP ".
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_INTERNAL_ERROR" " "
    "SAPLSTPA" or " "
    ==========================================================================
    Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
    So i request you to kindly help me on this as i am running out of time in delivering my server.
    Waiting for all the valuble replies
    Thank you in advance
    Regards
    Hunky

Maybe you are looking for