Error in the phase IMPORT_PROPER while applying support packages
Dear All,
I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
I have successfully applied the kernel patch and started applying the support packages, i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
========================================================================================================
START imp all SCD 20081229080538 DDIC sealcpro 20081229080537
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF SCD N not needed DDIC sealcpro 20081229080537
START tp_getprots SCD P 20081229080539 DDIC sealcpro 20081229080537
2EETP000 sap_dext called with msgnr "1":
2EETP000 db call info
2EETP000 function: db_setget
2EETP000 fcode: RT_SETB (65535)
2EETP000 tabname: TRBAT
2EETP000 len (char): 0
2EETP000 key:
2EETP000 retcode: 1
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 5319
STOP imp all SCD 0016 20081229080602 DDIC sealcpro 20081229080537
=========================================================================================================
And also when i look at the Support package import logs they show that
TEST IMPORT
Import ABAP Dictionary Objects and
ABAP Dictionary Activation phases ended with return code 4
But i dont think this can give any problem.
I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
I had to start SAP and only then i was able to connect to the SERVER again.
Can you please help me on this..
For any more information plz let me know
Thanks and regards
Hunky
Dear Balaji,
Thank you very much for the reply...
I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
===================================================================
DBIF_REPO_INTERNAL_ERROR
Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
An unspecified internal error occurred in the SAP-internal
database interface.
For further analysis the SAP system log should be examined
(transaction SM21).
Check the entries in the developer trace of the relevant work process
(transaction ST11).
Attempted to access component "LOAD" of program
"CX_SY_OPEN_SQL_DB=============CP ".
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_INTERNAL_ERROR" " "
"SAPLSTPA" or " "
==========================================================================
Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
So i request you to kindly help me on this as i am running out of time in delivering my server.
Waiting for all the valuble replies
Thank you in advance
Regards
Hunky
Similar Messages
-
Error while applying support packages
Hi,
I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW, the support package level was 02, I have downloaded 03,04,05,06 for all the above four components. While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
1.
Category: Abap programming error
Runtime error: call_function_parm_unknown
CX_SY_DYN_CALL_PARAM_NOT_FOUND
abap program: RSSPAM07
Function parameter "IV_IMP_SCENARIO" in unknown
this first error displayed after applying SPAM/SAINT update.
2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
The following details help you to analyse the problem:
Error in phase : IMPROT_PROPER
Reason for error:
Return code:
Error Message:
Please provide any solution as soon as possible....The details of SLOG
START CMDIMPORT NG1 L 20120227162812 SHABZ BasisTrn3 20120227162811973
STOP CMDIMPORT NG1 L 20120227162813 SHABZ BasisTrn3 20120227162811973
START imp all NG1 20120227162821 SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT NG1 H 20120227162822 SHABZ BasisTrn3 20120227162821661
STOP DD IMPORT NG1 H 20120227162839 SHABZ BasisTrn3 20120227162821661
START DD ACTIVATION NG1 A 20120227162839 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 J 20120227162839 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 J 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP DD ACTIVATION NG1 A 20120227162925 SHABZ BasisTrn3 20120227162821661
START DISTRIBUTION OF DD-O NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP DISTRIBUTION OF DD-O NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
INFO TBATG CONVERSION OF NG1 N not needed SHABZ BasisTrn3 20120227162821661
START MOVE NAMETABS NG1 6 20120227162929 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 P 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 P 20120227162935 SHABZ BasisTrn3 20120227162821661
STOP MOVE NAMETABS NG1 6 20120227162936 SHABZ BasisTrn3 20120227162821661
START MAIN IMPORT NG1 I 20120227162936 SHABZ BasisTrn3 20120227162821661
STOP MAIN IMPORT NG1 I 20120227163023 SHABZ BasisTrn3 20120227162821661
START TBATG CREATION OF EN NG1 n 20120227163024 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 Y 20120227163024 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 Y 20120227163034 SHABZ BasisTrn3 20120227162821661
STOP TBATG CREATION OF EN NG1 n 20120227163034 SHABZ BasisTrn3 20120227162821661
START EXECUTION OF REPORTS NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
STOP EXECUTION OF REPORTS NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0004 20120227163203 SHABZ BasisTrn3 20120227162821661
START CMDIMPORT NG1 L 20120227164418 SHABZ BasisTrn3 20120227164416991
STOP CMDIMPORT NG1 L 20120227164454 SHABZ BasisTrn3 20120227164416991
START DD IMPORT NG1 H 20120227165608 SHABZ BasisTrn3 20120227165607479
STOP DD IMPORT NG1 H 20120227170309 SHABZ BasisTrn3 20120227165607479
START DD ACTIVATION NG1 A 20120227170313 SHABZ BasisTrn3
START tp_getprots NG1 J 20120227170313 SHABZ BasisTrn3
STOP tp_getprots NG1 J 20120227171206 SHABZ BasisTrn3
STOP DD ACTIVATION NG1 A 20120227171206 SHABZ BasisTrn3
START imp all NG1 20120227171208 SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 S 20120227171303 SHABZ BasisTrn3 20120227171207614
STOP DISTRIBUTION OF DD-O NG1 S 20120227171304 SHABZ BasisTrn3 20120227171207614
START TBATG CONVERSION OF NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
STOP TBATG CONVERSION OF NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
START MOVE NAMETABS NG1 6 20120227171307 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 P 20120227171308 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 P 20120227171755 SHABZ BasisTrn3 20120227171207614
STOP MOVE NAMETABS NG1 6 20120227171755 SHABZ BasisTrn3 20120227171207614
START MAIN IMPORT NG1 I 20120227171756 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP MAIN IMPORT NG1 I 20120227195335 SHABZ BasisTrn3 20120227171207614
START TBATG CREATION OF EN NG1 n 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
START tp_getprots NG1 Y 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP tp_getprots NG1 Y 20120227195521 SHABZ BasisTrn3 20120227171207614
STOP TBATG CREATION OF EN NG1 n 20120227195521 SHABZ BasisTrn3 20120227171207614
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0903 20120227195522 SHABZ BasisTrn3 20120227171207614 -
DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0
Hi Gurus,
I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
Can you please help to reset the queue and implementing this support package.
Thank you,
Regards,
GaneshPaste the SPAM log here.
Regards,
Nick Loy -
Syntax Error while applying support package stack 8
I get the following short dump while I was applying support package stack 8. I'm at the latest saint version 34
Runtime Errors SYNTAX_ERROR
Date and Time 23.07.2009 14:09:27
Short text
Syntax error in program "CL_DYNPRO_PROPERTY_BAG========CP ".
What happened?
Error in the ABAP application program.
The current ABAP program "SAPLSCR2" had to be interrupted because it con
a statement that cannot be executed.
In the include "CL_DYNPRO_PROPERTY_BAG========CM009 " in the line 176 of
program "CL_DYNPRO_PROPERTY_BAG========CP " the following syntax
errors occur:
"The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
"d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
"PTEXT"."
Author and last person to change the include are:
Author "SAP "
Last changer "SAP "
Error analysis
The following syntax error was found in the program
CL_DYNPRO_PROPERTY_BAG========CP :
"The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
"d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
"PTEXT"."
Trigger Location of Runtime Error
Program SAPLSCR2
Include LSCR2U47
Row 31
Module type (FUNCTION)
Module Name RS_SCRP_PROP_ADD_TO_PROP_LIST
1 FUNCTION RS_SCRP_PROP_ADD_TO_PROP_LIST.
2 *"----
3 ""Lokale Schnittstelle:
4 *" IMPORTING
5 *" REFERENCE(P_TEXTFIELD) TYPE D021S-FNAM OPTIONAL
6 *" REFERENCE(P_TOOLTIPTEXT_TEXTELEM) TYPE CHAR3 OPTIONAL
7 *" REFERENCE(P_TOOLTIPTEXT_VARIABLE) TYPE D021S-FNAM OPTIONAL
8 *" REFERENCE(P_KEEPTAB) TYPE SEU_BOOL OPTIONAL
9 *" REFERENCE(P_DISABLEIMPLICITLABELS) TYPE SEU_BOOL OPTIONAL
10 *" REFERENCE(P_BARCODEINPUT) TYPE SEU_BOOL OPTIONAL
11 *" CHANGING
12 *" REFERENCE(P_PROP_LIST) TYPE PROP_LIST
13 *"----
14
15 data: l_prop type prop_line,
16 l_prop_list type prop_list,
17 l_string type prop_str.
18
19 * Property TextField
20 * -
21
22 if p_textfield is supplied.
23 clear l_prop_list.
24 clear l_prop.
25 l_prop-name = sprop_c_tag_textfield_name.
26 l_prop-syntax = sprop_c_syntax_content .
27 l_prop-value = p_textfield.
28 append l_prop to l_prop_list.
29 * Zusammensetzen eines Strings der Form
30 * <Name>value_1</Name> ... <Name>value_n</Name>
>> call method cl_dynpro_property_bag=>fill_prop_list_into_properties
32 exporting
33 prop_list = l_prop_list
34 importing
35 properties = l_string.
36 * Property-Eintrag zusammensetzen
37 clear l_prop.
38 l_prop-name = sprop_c_tag_textfield.
39 l_prop-type = sprop_c_type_string.
40 l_prop-syntax = sprop_c_syntax_content .
41 l_prop-value = l_string.
42 * Property-Eintrag in PROP_LIST aufnehmen/ersetzen
43 read table p_prop_list transporting no fields
44 with key name = l_prop-name.
45 if sy-subrc = 0.
46 modify p_prop_list index sy-tabix
47 from l_prop.
48 else.
49 append l_prop to p_prop_list.
50 endif.
Can anyone help me? I now get the same error with executing other transactions as well.Hi,
Please let us know the component which you are trying to apply. Is it BASIS or ABAP or BW and also let us know the version?
I hope you are applying the BW patch 8, as per SAP's recommendation we need to apply both 8 an 9 patch of BW at the same time. If not we need to apply some notes which you could find in the service market place. Once you apply the notes, you can proceed with the SP application.
Regards,
Varadhu -
DDIC_ACTIVATION ERROR WHILW APPLYING SUPPORT PACKAGES
Hi all,
While applying support package(KB62019),i got error(DDIC_Activation)..
How to resolve it?
Thanks in advance.Hi,
Which support package are you applying ? Have a look at these notes: 782140 and 447925.
Search for SAPKB62019 in this note and you will get a solution to that. The note refers to some more notes. Please follow the instuctions in the note carefully.
Cheers,
Sunil
PS: Reward points for helpful answers. -
Error occurred during the phase IMPORT_PROPER
Hi All,
We are currently installing Add-on ST-PI Rel.2008_1_620 SAPKITLRBA, and the corresponding 3 support packages SAPKITLRB1 to SAPKITLRB3, in one of the quality systems. However, an error is encountered during the installation which is as follows:
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
SAPKITLRBA)
Also, below is the SLOG of the system:
ERROR SAPKITLRBA ST6 I 0016 20110602203832 STPIUSER INUP
cpafisr5 20110602203531
STOP MAIN IMPORT ST6 I 20110602203833 INUP
cpafisr5 20110602203531
ERROR: stopping on error 16 during MAIN IMPORT
STOP imp all ST6 0016 20110602203833 INUP
cpafisr5 20110602203531
START MAIN IMPORT ST6 I 20110602203943 INUP
cpafisr5 20110602203943
START TRANSMIT BUFFER ENTR ST6 g 20110602204020 INUP
cpafist0
STOP TRANSMIT BUFFER ENTR ST6 g 0000 20110602204020 INUP
cpafist0
START COMMIT BUFFER ENTRIE ST6 g 20110602204020 INUP
cpafisk0
HALT 20110602204020
ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not
exist!
ERROR: EXIT(16) -> process ID is: 10932
WARNING: TA SAPKITLRB1 not found via index, reading whole buffer
The same add-on and support packages we successfully installed in its respective developement system and in other systems as well. However, request you all to kindly assist in resolving the error.
Thanks in advance.
Regards,
Indraneel UpponiERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not exist!
Does this file exist on this location ? It seems buffer insoncistency from the error message.
Regards,
Subhash -
Issue while apply support pack SAP_BASIS SAPKB70013 -18
Hi Gurus,
We have issue while apply support pack to Development system, we have implemented SAPKB70012 pack first and then we have implemented SPAU and saved in Trasport request . while applying other patch SAPKB70013 -18 in one go system asked us to release SPAU transport and then we released that transport after that same transport with auotomatic job it has got implemneted to Quality system and then after that we got below error in quality system :-
The function module "EXTENDED_AUTH_CHECK_FOR_REPS" is called, but
cannot be found in its function group.
Error in the ABAP Application Program
The current ABAP program "SAPLS38E" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Please suggest now both system is not working .
Regards,
JeetendraAlso you can check object modifications in transaction SE03 looking for request that touched object SAPLS38E.
Could you please share the syntax error message ?
Best regards -
While Import support package getting error in R/3
Hi All,
I am getting one error following error while importing support package in R/3.
Open data extraction requests
The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
Can Anybody aware of this error. How do I delete the open data extraction process specified here.
Thx & Regds,
SGKHi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK -
Error getting while importing support package in R/3
Hi All,
I am getting one error following error while importing support package in R/3.
Open data extraction requests
The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
Can Anybody aware of this error.
Thx & Regds,
SGKHi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK -
Error 112: The AIR target doesn't support native extensions
I have been developing an AIR app in Flash Builder. I recently created an ANE (Air Native Extension) for FMOD and linked it with my AIR app. ADT user-unfriendliness aside, I got it working.
When I try to update my Ant build script to package the ANE files with my AIR project, ADT complains:
My-App-Descriptor-Name.xml: error 112: The AIR target doesn't support native extensions.
This comes as a surprise to me, because I've been compiling and developing the AIR app in Flash Builder with the ANE extensions. It also doesn't make sense, because I packaged my ANE with platform specific libraries for multiple platforms (Windows and MacOs), so when the AIR app runs on these platforms, it should work. However, this aside, my main point is:
How the heck does this work in Flash Builder if AIR targets do not support ANE? What is Flash Builder doing, exactly, when I Run or Debug an AIR app with ANEs?
Thanks!
JWhi I have the same issue while publishing my app app.xml: error 112: The AIR target doesn't support native extensions. plz help
-
Error message: "The Birthdays calendar does not support events."
Error message: "The Birthdays calendar does not support events." pops up 100 times..probably as many times as I have birthdays in my contacts....very irritating...
Well mother of christmas Apple, what the **** is this?! Please help us get this off the screen
-
MAM Not Working After Applying Support Package
We have been lived with MAM 2.5 with SP16 for almost a year now. We recently applied support package 19 for ABAP and J2EE stacks but MAM stopped working right after that. To fix the problem we had to do the following steps:
1. Disable all SyncBO
2. Regenate all SyncBO
3. Run Replicate Database
4. Enable all SyncBO
5. Delete MAM 2.5 client by WebConsole for all PDA (over 100 devices)
6. Re-Assign MAM 2.5 client back to PDA from WebConsole
My question is do we have to perform those steps above every time we are applying new support package? If it is a case, it's very time consuming because we have to manually perform step 5-6 for every users.
Does anyone have seen or experience this scenario before? Your comment is highly appreciated.
Regards,
Dai LyHi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly -
After applying support package up to sapkb64020 finance node in IMG disappe
We havwe an ECC5. It seems that (very probably as we noticed aftervards)after applying
support package up to sapkb64020 in IMG(SPRO) "finance" node(and nodes
beneath) disappeared. As this is very urgent I would kindly ask you for good answersHey,
The sulotion for this problem exists in note number 922552:
Note 922552 - SPRO: Financial Accounting Node not visible in Reference IMG
good luck -
Error in IMPORT_PROPER while applying SAP_APPL 12 SP in ECC 6
Hi All,
I am applying Support pack12 of SAP_APPL (SAPKH60012) in my ECC 6.0. The system is on linux with oracle 10.2 G.
the patch implementation is stopping at IMPORT_PROPER (Error_Stop). I have checked TP and everything is running fine. I am pasting below the action log of the same. Please let me know what could be the problem. Also let me know if required anything else.
Import phase 'IMPORT_PROPER' (15.01.2009, 08:29:49)
Error during executing the tp command 'tp IMPORT all ECD ...'
tp return code: '0012' , tp message: 'A tool used by tp aborted' , tp output:
This is tp version 372.04.08 (release 700, unicode enabled)
Warning: Parameter DICTIMP_PROC is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DICTIMP_PROC is no longer used.
ERROR: stopping on error 12 during MOVE NAMETABS
stopping on error 12 during MOVE NAMETABS
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
Details of the error situation can also be found in the import logs
Interrupt the import due to an error situation (15.01.2009, 08:31:35)
Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (15.01.2009, 08:31:40)
Thanks,
Bhanu Pratap SinghHi,
I went through SLOG and ALOG but it was too long and nothing appropriate is there. Find below the P090115.SID Log. It is saying to activate two shadow name tabs. but i didn't know how.
1 ETP172 MOVE OF NAMETABS
1 ETP101 transport order : "ALL"
1 ETP102 system : "ECD"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.08" "700"
1 ETP198
3 ETP399XMove Nametabs started in batch mode.
2 ETP399 processing modeflag 'A'
2 ETP301 -
2 ETP364 Begin: Act. of Shadow-Nametabs ("2009/01/15 22:46:56")
2 ETP301 -
2 ETP301 -
2 ETP338XActivation of Shadownametabs
2 ETP301 -
3 ETP379Xactivating Nametab "WVERW_045D":
2 ETP399 -
DB-ROLLBACK() -
2AETP399XWrite table "WVERW_045D ": pgntab call: SQL error.
3 ETP379Xactivating Nametab "WVERW_045G":
2 ETP399 -
DB-ROLLBACK() -
2AETP399XWrite table "WVERW_045G ": pgntab call: SQL error.
2 ETP301 -
3 ETP365 "0" Shadow-Nametabs activated
2 ETP362 "2" Shadow-Nametab activations failed
2 ETP364 Begin: Act. of Shadow-Nametabs ("2009/01/15 22:46:56")
2 ETP366 End: Act. of Shadow-Nametabs ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'W'
2 ETP301 -
2 ETP347XActivation of Shadownametabs (delete) with DDL
2 ETP301 -
2 ETP301 -
2 ETP301 -
3 ETP368 "0" Shadow-Nametabs deleted, DDL executed
3 ETP369 "0" Shadow-Nametab deletions failed
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP370 End: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'X'
2 ETP301 -
2 ETP347XActivation of Shadownametabs (delete) with DDL
2 ETP301 -
2 ETP301 -
2 ETP301 -
3 ETP368 "0" Shadow-Nametabs deleted, DDL executed
3 ETP369 "0" Shadow-Nametab deletions failed
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
P090115 Log
2 ETP370 End: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'Y'
2 ETP301 -
2 ETP347XActivation of Shadownametabs (delete) with DDL
2 ETP301 -
2 ETP301 -
2 ETP301 -
3 ETP368 "0" Shadow-Nametabs deleted, DDL executed
3 ETP369 "0" Shadow-Nametab deletions failed
2 ETP367 Begin: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP370 End: Act. of Shadow-Nametabs (delete) with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'F'
2 ETP301 -
2 ETP330XActivation of Shadownametabs with DDL
2 ETP301 -
2 ETP301 -
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
3 ETP362 "0" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP301 -
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
2 ETP399 processing modeflag 'V'
2 ETP301 -
2 ETP330XActivation of Shadownametabs with DDL
2 ETP301 -
2 ETP301 -
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
3 ETP362 "0" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/15 22:47:59")
2 ETP301 -
1 ETP172 MOVE OF NAMETABS
1 ETP110 end date and time : "20090115224759"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Thanks,
Bhanu -
Error Message: "The formula syntax is not supported by the report"
We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
But when I tried to Add FormulaField, it succeeds
Please help me in knowing how to add SQlExpressionFields to ReportDocument.
Regards,
-atulThanx Don & Ludek for the reply.
CR provides support for addition/modification of SQLExpressions.
CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
innerReport .SQLExpressionFields.Add(name, strSQLExpression)
CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
Thanx
-atul
Edited by: Atul Chivate on Aug 21, 2011 6:13 PM
Maybe you are looking for
-
3rd gen 20GB iPod not being detected / freezing computer
One day I plugged in my iPod before I left for work so it would charge, and when I came back it was still stuck on the do not disconnect screen. This was before I knew you could reset the iPod with the select/menu buttons, so I just left it for a bit
-
I don't know why my sound is not working
all of a sudden my sound is not working
-
Hyper-V Cluster. Cannot ping Cluster A.D. account in nodes
Hi I've got H-V cluster with two nodes TN1 and TN2. On TN1 i can ping A.D. cluster account TC1 (ping tc1: 10.1.1.23) but on TN2 i cannot do it. I get: Ping request could not find host thvc1. Please check the name and try again. At this time cluster i
-
Hi, My scenario is an outbound XML IDoc. My problem: when a field of a IDoc segment is empty, this field will not write to XML file. I checked standard program and i have founded this ABAP line during standard creation of XML: program: LEDI7F05 line:
-
Finding threads that have new messages
Like a lot of people I post suggestions in reply to new topics. I don't want to subscribe to every thread that I take part in, that would be a lot of emails coming to me! But I do want to go to My Posts and quickly see what threads have new messages.