Error On access gsm modem using smslib.jar

Hi,
I had a GSM Modem.
I wish to use different java application to access the GSM modem at the same time.
I already had one web application that will send the sms using the gsm modem.
This application will alway release the connection to the modem after it send the sms.
However, i need to use another java application to read the sms from the modem.
I encounter the message below when i run the application,
C:\Test>java -jar smsutil.jar
Exception in thread "main" java.lang.NoClassDefFoundError: org/smslib/CService
at com.radius.sms.ReadMessages.main(ReadMessages.java:27)
can anybody tell me how its happen and the solution for this?
thanks in advance.

I has this error:
Exception in thread "main" java.lang.NoClassDefFoundError: gnu/io/SerialPortEven
tListener
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
4)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at org.smslib.CService.<init>(CService.java:79)
at SendSMS.main(SendSMS.java:15)
Press any key to continue...
this is to download my project (by Jcreator). helpe me!
http://www.fileden.com/files/27548/upload/MyProject.zip

Similar Messages

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error while accessing excel file using ODBC

Hi
I am getting the below error message while accessing excel sheet using ODBC from Oracle:
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from EXCL
Can anyone help me on this...
Cheers
Pradeep
Message was edited by:
user634393

          Hi
          Thank you.Is there a way to read a file which is existing in the war file.
          Regards
          Anand Mohan
          "Wenjin Zhang" <[email protected]> wrote:
          >
          >In Weblogic, if your files are archived in a WAR, you cannot get an entry
          >as individual
          >file since it is only bytes in a large archive file. So getRealPath will
          >give
          >you null result. If you only want the path, try to use other getXXXPath,
          >getURL,
          >or getURI method. If you want to read the content, use getResource.
          >
          >
          >"Anand" <[email protected]> wrote:
          >>
          >>Hi
          >>I am having problem while accessing the file located in the server from
          >>a JSP
          >>page. I am not getting the RealPath from a JSP page using getRealPath(request.getServletpath()).
          >>
          >>The same code is working if the jsp placd under defaultwebApp directory
          >>and not
          >>working if i create a war and deploy the same.
          >>
          >>I am using weblogic server 7.0 trail version.I am setting the context
          >>path also.
          >>
          >>Can any help me in this regard.
          >>
          >>Thank And Regards
          >>
          >>Anand Mohan
          >

Error while running WDJ application using jxl.jar

Hi Experts,
I am using jxl.jar in my webdynpro java application in CE7.2. I added jxl.jar in java build path and place the jar file in lib directory of webdynpro DC. It shows error in development configuration perspective while building, then i created another DC of type ExternalLibrary and added jxl.jar in libraries folder, then i right click on that jar and published as archive. Then in Development configuration perspective i added ExternalLibrary project to my webdynpro DC, it doen't shows error while building.
I deployed successfully, when i run the application, it shows the following error. Is there any fault in adding external jar to mt DC? i can't understand where the problem is?
Error:
java.lang.ClassNotFoundException: jxl.Workbook -
Loader Info -
ClassLoader name: [com.drl.bomrecipe/bomrecipe] Loader hash code: 30a86ee9 Living status: alive Direct parent loaders: [system:Frame] [interface:webservices] [interface:cross] [interface:security] [interface:transactionext] [library:webservices_lib] [library:opensql] [library:jms] [library:ejb20] [service:p4] [service:ejb] [service:servlet_jsp] [sap.com/tcwdapi] [library:tcblexceptionlib] [library:tcblloggingapi] Resources: E:\usr\sap\CE7\J00\j2ee\cluster\apps\com.drl.bomrecipe\bomrecipe\servlet_jsp\webdynpro\resources\com.drl.bomrecipe\bomrecipe\root\WEB-INF\lib\com.drl.bomrecipe~bomrecipe.jar -
    at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:272)
    at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:241)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:367)
help me please, thanks in advance
Regards,
Pradeep Kumar G

Hi Pradeep,
Have you created both compilation and assembly public parts for your Ext Lib, and have you added them both to your Used DC's list?
Also remember, since you are using an assembly public part, the 'Create Archive' and 'Deploy new archive and run' should not be used!
Use the DC Build and DC Deploy instead.
Hope this helps!
Robin van het Hof

403 Error when access Table Storage using SAS token

I have Azure Mobile Service which has a custom API to generate a sas token for accessing Table Storage from Windows Store app.
I get following error in Windows Store app while accessing table storage using sas token:
Server failed to authenticate the request. Make sure the value of Authorization header is formed correctly including the signature.
Example of sas token generated:
se=2014-09-12T03%3A10%3A00Z&sp=rw&spk=MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2&epk=MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2&sv=2014-02-14&tn=Folders&sig=91c7S1QM0byNdM80JncwRribXqsWS1iKmOH8cRvHWhQ%3D
Azure Mobile Services API Code that generates sas token:
exports.get = function(request, response) {
var azure = require('azure-storage');
var accountName = 'myAccountName';
var accountKey = 'myAccountKey';
var host = accountName + '.table.core.windows.net';
var tableService = azure.createTableService(accountName, accountKey, host);
var sharedAccessPolicy = {
AccessPolicy: {
Permissions: 'rw', //Read and Write permissions
Expiry: dayFromNow(1),
StartPk: request.user.userId,
EndPk: request.user.userId
var sasToken = tableService.generateSharedAccessSignature('myTableName', sharedAccessPolicy);
response.send(statusCodes.OK, { sasToken : sasToken });
function dayFromNow(days){
var result = new Date();
result.setDate(result.getDate() + days);
return result;
Windows Store app code that uses sas token:
public async Task TestSasApi()
try
var tableEndPoint = "https://myAccount.table.core.windows.net";
var sasToken = await this.MobileService.InvokeApiAsync<Azure.StorageSas>("getsastoken", System.Net.Http.HttpMethod.Get, null);
StorageCredentials storageCredentials = new StorageCredentials(sasToken);
CloudTableClient tableClient = new CloudTableClient(new Uri(tableEndPoint), storageCredentials);
var tableRef = tableClient.GetTableReference("myTableName");
TableQuery query
= new TableQuery().Where(TableQuery.GenerateFilterCondition("PartitionKey",
QueryComparisons.Equal,
this.MobileService.CurrentUser.UserId));
TableQuerySegment seg = await tableRef.ExecuteQuerySegmentedAsync(query, null);
foreach (DynamicTableEntity ent in seg)
string str = ent.ToString();
catch (Exception ex)
string msg = ex.Message;
Exception:
Any help is appreciated.
Thanks in advance!
Thanks, Vinod Shinde

Hi Mekh,
Thanks for the links. I checked them and mostly they are due to date time on client and server.
But this is not the case in this scenario.
here is the Request and Response from Fiddler.
Request:
GET
https://myaccount.table.core.windows.net/Folders?se=2014-09-13T02%3A33%3A26Z&sp=rw&spk=MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2&epk=MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2&sv=2014-02-14&tn=Folders&sig=YIwVPHb2wRShiyE2cWXV5hHg0p4FwQOGmWBHlN3%2FRO8%3D&api-version=2014-02-14&$filter=PartitionKey%20eq%20%27MicrosoftAccount%3A005d92ef08ec5d83081afed1e08641d2%27
HTTP/1.1
Accept: application/atom+xml, application/xml
Accept-Charset: UTF-8
MaxDataServiceVersion: 2.0;NetFx
x-ms-client-request-id: b5d9ab61-5cff-498f-94e9-437694e9256c
User-Agent: WA-Storage/4.2.1 (Windows Runtime)
Host: todoprime.table.core.windows.net
Response:
HTTP/1.1 403 Server failed to authenticate the request. Make sure the value of Authorization header is formed correctly including the signature.
Content-Length: 437
Content-Type: application/xml
Server: Microsoft-HTTPAPI/2.0
x-ms-request-id: 22c0543b-0002-0049-7337-da39f4000000
Date: Thu, 11 Sep 2014 02:33:28 GMT
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<code>AuthenticationFailed</code>
<message xml:lang="en-US">Server failed to authenticate the request. Make sure the value of Authorization header is formed correctly including the signature.
RequestId:22c0543b-0002-0049-7337-da39f4000000
Time:2014-09-11T02:33:29.6520060Z</message>
</error>
Do you see anything different in this request/response?
Thanks, Vinod Shinde

500 error while accessing a jsp using tiles tags

Hi all,
when im trying to access a jsp which makes use of tiles tags, im getting the following error.
status 500:
org.apache.jasper.JasperException: The absolute uri: http://struts.apache.org/tags-tiles cannot be resolved in either web.xml or the jar files deployed with this application
what might be the problem?
Thanks in advance.

asp,
1. this is a java forum, and that's a jsp/struts question... you'll do better on the jsp forum.... or maybe a struts forum.
2. it can't find http://struts.apache.org/tags-tiles ... but you knew that already didn't you... and where in the wide world might that uri be? maybe in struts generated xml? maybe in the schema declatation?
keith.

Error while accessing remote server using applet in jsp page

hii..
We are accessing a data repository MDSPlus. Its used for storing data such as signals in tree like structure. We r coding for client side in JSP .
For this we are invoking applet which uses jar files of jScope(java tool for displaying waveforms). We r getting the following error when we try to access a remote server in network. But it works fine with local server.
So kindly help .
ERROR IS:
java.security.AccessControlException:access denied(java.net.SocketPermission 202.41.112.140:8000 connect,resolve)
url mds:://202.41.112.140/SST_DAQ/11/\SST_DAQ::TOP.BOLOMETER:BOLO_1
Use ploicytool.exe in JDK or JRE installation directory to add socket access permission.
The IP address mentioned above in error is the computer with which v have to connect. SST_DAQ is the expt name,11 is the shot no. , BOLOMETER and BOLO_1 are the tree node s..
plzz reply fast........

Hi Frank,
Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
Ensure the case of the JNDI lookup string, since, it is case sensitive.
Hope this helps.
Abhijeet

Error while accessing a library using content and structure

I have a library having document and folder inside it. When I open the library using content and structure I get an error with a correlation ID. When checked the the logs with Correlation ID got an error message "View 'All Document' does not exist."
'All Document' is name of default view on the library.
When I open the library from view all site content the library is being opened.
Please help!!!

Hello Victoria,
Thanks for the response.
I have tried troubleshooting steps given by you.
Check if the issue occurs with other users. Use another user to access the library in Content and Structure and then compare the results. --
I tried with different users but no luck
Make sure that the user account with issue has permission to view the All Documents view of the library. --
Yes, user Account have the permission
Check if the issue occurs with other libraries in the Content and Structure. If not, I recommend to save the library as
a template including contents and then create a new library based on this template. After that use the new library instead of the old library. --
No other library have this problem. I cannot save the library as template including the contents as the it has many folders and files. The current size of library is 786 MB
Clear cache in the browser or use another browser to see if the issue still occurs. --
tries but issue persists.
Best regards,
Ratnesh

Error while Accessing Smart Card using Open Card Frame Work

HI
Using Open Card Frame work I am trying to access GemAlto provided Smart Card (java card). I downloaded the Open Card Frame work from http://www.openscdp.org/ocf/download.html.
I am executing a basic program to access the data stored in smart card.
public static void main(String[] args)
                    System.out.println("reading smartcard file...");
                    try {
                    SmartCard.start();
                    CardRequest cr = (FileAccessCardService.class);
                    System.out.println("calling waitforCard");
                    SmartCard sc = SmartCard.waitForCard(cr); //Error comes after this line
                    System.out.println("After waitForCard called");
                    FileAccessCardService facs = (FileAccessCardService)
                    sc.getCardService(FileAccessCardService.class, true);
                    CardFile root = new CardFile(facs);
                    CardFile file = new CardFile(root, ":c009");
                    byte[] data = facs.read(file.getPath(), 0,
                    file.getLength() );
                    sc.close();
                    String entry = new String(data);
                    entry = entry.trim();
                    System.out.println(entry);
                    } catch (Exception e) {
                         e.printStackTrace(System.err);
                    System.exit(0);
The content of the opencard.properties are :
          OpenCard.services = opencard.opt.util.PassThruCardServiceFactory
OpenCard.terminals = com.ibm.opencard.terminal.pcsc10.Pcsc10CardTerminalFactory
OpenCard.trace = opencard:5 com.ibm:4 opencard.opt.database:6
After the line SmartCard sc = SmartCard.waitForCard(cr);
the program is expecting a card to be inserted but while inserting Smartcard the following error message come :
          calling waitforCard
          [ERROR    ] com.ibm.opencard.terminal.pcsc10.OCFPCSC1.OCFPCSC1.SCardConnect
--- message
--- thread Thread[Thread-0,5,main]
--- source com.ibm.opencard.terminal.pcsc10.OCFPCSC1@2e7263
[ERROR    ] com.ibm.opencard.terminal.pcsc10.OCFPCSC1.OCFPCSC1.SCardConnect
--- message Protocol = 0
--- thread Thread[Thread-0,5,main
--- source com.ibm.opencard.terminal.pcsc10.OCFPCSC1@2e7263
Basically the error is coming from the SCardConnect function of OCFPCSC1.cpp file.
Please reply to my mail id if any body has any idea how to resolve this issue.
MAIL-ID : [email protected]
With Regards
Swarup
Finacle Archie
Infosys Technologies Limited,Bhubaneswar,India

Sounds like an issue that has to do with JavaScript Origin policy. You'll have to use Domain Relaxing for this. Read all about it here:
http://help.sap.com/saphelp_nw04/helpdata/en/59/87b54064c2742ae10000000a155106/frameset.htm
here:
http://help.sap.com/saphelp_nw04/helpdata/en/5e/473d4124b08739e10000000a1550b0/frameset.htm
and here:
http://help.sap.com/saphelp_nw04/helpdata/en/cb/f8751d8c6b254dac189f4029c76112/frameset.htm

Error while accessing TE application using IE 9

Hi Experts,
We are getting error while trying to access Travel And Expense applications using Internet Explorer 9.
Error description---Sorry your browser/program is not supported by web dynpro.

Hi,
Please refer the below links which could be helpful:
Sorry, your browser/program is not supported by Web Dynpro - IE 9 / Win 7
/thread/274510 [original link is broken]
Regards,
Kiron Kumar T.

"SCRIPT5: Access is denied" error when accessing web sites using LocalStorage

We are having an issue with Internet Explorer 10 affecting users on a number of our Windows 8 workstations. When a user visits a web site that uses the Local Storage feature of HTML5, the page is not displayed correctly. For example, if you visit this page:
http://jsfiddle.net/xFtQR/
You should see text in the grey boxes in the lower-right hand corner if everything is working. For the affected users, nothing is displayed. In addition, if you open the F12 Developer Tools and reload the page, the following error message is displayed: "SCRIPT5:
Access is denied.". It appears the LocalStorage feature is broken for these users.
From the troubleshooting I've done so far, I've determined that this issue does not affect the Local Administrator account on these computers, but it does affect any domain user and any new local user I create, whether the local user is in the Administrators
group or not. This leads me to believe the issue may be related to the default user profile in the image that was applied to these computers.
Other observations:
Performing a complete reset of Internet Explorer settings (from Tools > Internet Options... > Advanced) does not resolve the issue
These sites do work correctly after turning off Protected Mode for the Internet Zone (from Tools > Internet Options... > Security)
These sites also work correctly when InPrivate Browsing is turned on
I've tried using Process Monitor to determine whether access is being blocked to a folder. On a working computer, iexplore.exe creates a file within a folder at C:\Users\username\AppData\LocalLow\Microsoft\Internet Explorer\DOMStore. I can't see
anything on an affected computer that would prevent IE from creating this folder, as the security settings on the folder all appear to be correct.
The location of this folder appears to be stored in the registry at HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\LowCache\Extensible Cache\DOMStore. I've tried copying this key from a working computer and blanking
it out entirely to have IE recreate it, but neither resolved the issue. I've even gone as far as to try and compare an export of the registry from the default user profile from a working system and an affected system but I haven't been able to pinpoint any
differences which I thought might be relevant.
I've tried the "Internet Explorer Performance" and "Internet Explorer Safety" troubleshooters in the Control Panel.
Here are some links to articles on other sites which make reference to the same (or a similar) issue:
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/ie10-script5-access-is-denied/e87bdb30-7f2a-4510-bfa3-a22b995f777b
http://community.spiceworks.com/topic/357825-ie10-script5-access-is-denied
https://github.com/meteor/meteor/issues/1291
Unlike these other cases, deleting an affected user's profile does not resolve the issue (further bolstering my theory that the issue is due to an issue in the default profile in my case).
Thanks in advance for any assistance anyone can provide!

With some excellent detective work by Microsoft Product Support (thanks Siddarth!), the solution has been found.
It turns out that in addition to the security settings on a folder, there is an integrity setting. More information about it is
here.
The integrity setting on the AppData\LocalLow folder in each user's profile is supposed to be set to "Low" (hence the name, presumably). In our case, the integrity level was not set correctly on this folder. To rectify the problem, we will need
to run the following command under each user's profile (with a login script, for example):
icacls %userprofile%\Appdata\LocalLow /t /setintegritylevel (OI)(CI)L
As for how this incorrect setting was propagated in the first place, it is because the LocalLow folder in the C:\Users\Default\Appdata folder in our customized OS image had the wrong setting. The C:\Users\Default folder is the template for a new user profile,
so each new user on these computers was affected. I examined the C:\Users\Default\AppData folder on another machine without a customized user template and found the LocalLow folder is not present at all, so in our environment we will be deleting the C:\Users\Default\AppData\LocalLow
from each machine to prevent the issue from affecting future new users.
EDIT: If the command above does not resolve the issue, the registry key that points to the low integrity DOMStore folder may have been changed. Check the
CachePath registry value at HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\LowCache\Extensible Cache\DOMStore. It should be
%USERPROFILE%\AppData\LocalLow\Microsoft\Internet Explorer\DOMStore.

Error while accessing SCCM (streamed) using Citrix.

I am accessing CM console remotely(running win 7), but i started to get the above errors recently. I had tried clearing cache, reinstalling Citrix. Most of the solutions were for server which i dont have access to.
Thanks in advance.

Hi Guys,
So ive applied the patch but still having the issue. It seems to be randon almost it worked for a couple of days then started givign the error again. Any help will be appriciated. Also Im accessing SCCM remotely from a client machine so the solution
by removing the cache file does not apply here.

Error : Access not possible using "null" objects reference

Hello.
i am working with a zbapi.
i called a external email program in this bapi,everything is working fine over here.
In webdynpro java they mapped my bapi and starting working from there.
every functionality is working fine but regarding this email stuff it is showing an error as access not possible using null objects reference.
where could be the possible error.
is it in webdynpro or in abap side.

Raghu,
You are right. When it comes from the WD Java, may be you are not passing any value at all. You can trace it by these ways.
1. Check it using SE37, make sure everyhting is fine.
2. Print all the values that you are passing to the RFC in the execute RFC method().
3. using ST05 transaction in R/3, enable RFC and SQL trace, check what is passing in between web dynpro and R/3.
Moreover paste your error message here.
Thanks,
Raj.

Error due to accessing database connection using jsp

Hi,
I have an error, during accessing a datbase using jsp:useBean from jsp.Urgent i need this one
my source code is
DbBean.java
package SQLBean;
import java.sql.*;
import java.io.*;
public class DbBean implements java.io.Serializable{
private String dbDriver = "sun.jdbc.odbc.JdbcOdbcDriver";
private Connection dbCon;
public DbBean(){
super();
public boolean connect() throws ClassNotFoundException,SQLException{
Class.forName(dbDriver);
dbCon = DriverManager.getConnection("jdbc dbc:mybean","","");
return true;
public void close() throws SQLException{
dbCon.close();
public ResultSet execSQL(String sql) throws SQLException{
Statement s = dbCon.createStatement();
ResultSet r = s.executeQuery(sql);
return (r == null) ? null : r;
public int updateSQL(String sql) throws SQLException{
Statement s = dbCon.createStatement();
int r = s.executeUpdate(sql);
return (r == 0) ? 0 : r;
database.jsp
<HTML>
<HEAD><TITLE>DataBase Search</TITLE></HEAD>
<BODY>
<%@ page language="Java" import="java.sql.*" %>
<jsp:useBean id="db" scope="application" class="SQLBean.DbBean" />
<jsp:setProperty name="db" property="*" />
<center>
<h2> Results from </h2>
<hr>
<br><br>
<table>
<%
db.connect();
ResultSet rs = db.execSQL("select * from employ");
int i = db.updateSQL("UPDATE employ set fname = 'hello world' where empno='000010'");
out.println(i);
%>
<%
while(rs.next()) {
%>
<%= rs.getString("empno") %>
<BR>
<%
%>
<BR>
<%
db.close();
%>
Done
</table>
</body>
</HTML>
The error like this
org.apache.jasper.JasperException: Unable to compile class for JSPNote: sun.tools.javac.Main has been deprecated.
error: Invalid class file format in C:\Program Files\Apache Tomcat 4.0\webapps\muthu\WEB-INF\classes\SQLBean\DbBean.class. The major.minor version '49.0' is too recent for this tool to understand.
An error occurred at line: 7 in the jsp file: /database.jsp
Generated servlet error:
C:\Program Files\Apache Tomcat 4.0\work\localhost\muthu\database$jsp.java:65: Class SQLBean.DbBean not found.
SQLBean.DbBean db = null;
^
An error occurred at line: 7 in the jsp file: /database.jsp
Generated servlet error:
C:\Program Files\Apache Tomcat 4.0\work\localhost\muthu\database$jsp.java:68: Class SQLBean.DbBean not found.
db= (SQLBean.DbBean)
^
An error occurred at line: 7 in the jsp file: /database.jsp
Generated servlet error:
C:\Program Files\Apache Tomcat 4.0\work\localhost\muthu\database$jsp.java:73: Class SQLBean.DbBean not found.
db = (SQLBean.DbBean) java.beans.Beans.instantiate(this.getClass().getClassLoader(), "SQLBean.DbBean");
^
4 errors, 1 warning
Anybody help me?
Thanx in advance

Your code is ok . The problem is in java version witch you use to compile the DbBean class . I think you are using java 1.5 try to change to 1.4 compile and run again should help .

Error connecting GSM Modem with system using java (error no is 20)

hi!
I'm new to jms, i want to send sms using GSM Modem.I used sony Ericsion mobile. I got one sample application , when i run it thows the following exceptions.
Feb 27, 2008 4:31:27 PM org.jsmsengine.CSerialDriver open
INFO: Connecting...
Feb 27, 2008 4:31:28 PM org.jsmsengine.CSerialDriver close
INFO: Disconnecting...
Connection to mobile failed, error: -20
i used the following code
import org.jsmsengine.*;
class SendMessage
public static void main(String[] args)
int status;
// Create jSMSEngine service.
CService srv = new CService("COM6",9600);
System.out.println();
System.out.println("SendMessage(): sample application.");
System.out.println(" Using " + srv._name + " " + srv._version);
System.out.println();
try
// Initialize service.
srv.initialize();
// Set the cache directory.
srv.setCacheDir(".");
// Set the phonebook.
// srv.setPhoneBook("../misc/phonebook.xml");
// Connect to GSM device.
status = srv.connect();
// Did we connect ok?
if (status == CService.ERR_OK)
// Set the operation mode to PDU - default is ASCII.
srv.setOperationMode(CService.MODE_PDU);
// Set the SMSC number (set to default).
srv.setSmscNumber("");
// Print out GSM device info...
System.out.println("Mobile Device Information: ");
System.out.println(" Manufacturer : " + srv.getDeviceInfo().getManufacturer());
System.out.println(" Model : " + srv.getDeviceInfo().getModel());
System.out.println(" Serial No : " + srv.getDeviceInfo().getSerialNo());
System.out.println(" IMSI : " + srv.getDeviceInfo().getImsi());
System.out.println(" S/W Version : " + srv.getDeviceInfo().getSwVersion());
System.out.println(" Battery Level : " + srv.getDeviceInfo().getBatteryLevel() + "%");
System.out.println(" Signal Level : " + srv.getDeviceInfo().getSignalLevel() + "%");
// Create a COutgoingMessage object and dispatch it.
// *** Please update the phone number with one of your choice ***
COutgoingMessage msg = new COutgoingMessage("+919830645175", "Ripon");
// Character set is 7bit by default - lets make it UNICODE :)
// We can do this, because we are in PDU mode (look at line 63). When in ASCII mode,
// this does not make ANY difference...
msg.setMessageEncoding(CMessage.MESSAGE_ENCODING_UNICODE);
if (srv.sendMessage(msg) == CService.ERR_OK) System.out.println("Message Sent!");
else System.out.println("Message Failed!");
// Disconnect from GSM device.
srv.disconnect();
else System.out.println("Connection to mobile failed, error: " + status);
catch (Exception e)
e.printStackTrace();
System.exit(0);
In my jre path i added win32.dll to use comm.jar
please help me

Thanks so much; you just helped me fit together the last few pieces of this puzzle. I did a little more digging and found a [url http://support.webecs.com/KB/a375/how-do-i-configure-sql-server-express-to-allow-remote.aspx]knowledge base article that explains how to set a static TCP port. According to the article, SQL Server 2005 selects a random dynamic port on installation, and my experience bears out the fact that it does survive server reboots.
TheAvalanche wrote:
If you don't want that, make sure the SQL Server Browser service is running and connect to your SQL Server using the instance name, and not use a port in the JDBC-url.
BTW: I am not sure if jtds supports usage of the browser service, the Microsoft SQL Server JDBC drivers since version 1.2 (I think) do.It would appear that jTDS doesn't support the browser service, at least not by default, because I tried using the instance name rather than the port to connect (along with just about every other possible combination) and it didn't work. In my opinion, using a static port makes a lot more sense anyway, since you don't have to rely on the browser service, and you'll always know what port to set in your firewall exceptions. (For anyone out there wondering about firewall exceptions, in addition to the static port for the server, an exception has to be created for the browser on UDP 1434 if you're going to use it, which most programs apparently do.)
Once again, thanks for all the good information!
Edited by: javadecaf on May 27, 2011 8:03 AM
Insert link button on toolbar generated link syntax that doesn't work: text. What's up with that?

Error On access gsm modem using smslib.jar

Similar Messages

Maybe you are looking for