Error on importing OpenTrans dtd
Hi,
I have some difficulties importing a dtd of the german OpenTrans standard.
The part which seems to be a problem is:
<b> <!ELEMENT ORDER (ORDER_HEADER , ORDER_ITEM_LIST , ORDER_SUMMARY)>
<!ATTLIST ORDER
version CDATA #FIXED "1.0"
xmlns CDATA #FIXED 'http://www.opentrans.org/opentrans/1.0/opentrans_order'
type (standard | express | release | consignment ) 'standard' ></b>
The error is:
<b>The name "xmlns" is not correct!</b>
How can I fix this without removing xmlns from the dtd?
Hi,
I have the same problem with the DTD. Did any one find the solution ?
Myr problem is that our partner demands that the xml file has the <!-- DOCTYPE ORDER SYSTEM "openTRANS_ORDER_1_0.dtd" --> tag .
So I see 2 solution.
1) use the DTD
2) Use XSD an some how insert this tag with xslt. I could not solved this properly !
Similar Messages
-
Error While Importing DTD to XI
Hi all,
I have a DTD from cxml.org. While importing that DTD into the XI as external definitions, the message types couldn't be shown.
Can anybody please suggest the reason?
Any help will be appriciated.
Kind regards,
KulwantHi,
Thanks alll for reply. Let me bit explain more. While i import this DTD, i get an error in the WSDL tab in the imported external definitions screen,
Unable to convert imported document to WSDL
Reason: Entity "Method.ANY" already declared
Check the selected category
Can any body suggest
I have posted the dtd below:
<?xml version="1.0" encoding="UTF-8"?>
<!--
For cXML license agreement information, please see
http://www.cxml.org/home/license.asp
$Id: //ariba/cxml/modules/Common.mod#6 $
-->
<!--
A few character entities the XML recommendation says should be defined
"for interoperability" with existing SGML parsers. By default, these
are not included to avoid warnings (about entity redefinition) from
many XML parsers.
-->
<!ENTITY % SGML-help "IGNORE">
<![%SGML-help;[
<!ENTITY lt "&#60;">
<!ENTITY gt ">">
<!ENTITY amp "&#38;">
<!ENTITY apos "'">
<!ENTITY quot """>
]]>
<!--
Common types used throughout the cXML definition.
The types try to follow the XML DATA definition submitted to the W3C. See
the following for more information,
http://msdn.microsoft.com/xml/reference/schema/datatypes.asp
http://www.w3c.org/TR/1998/NOTE-XML-data-0105/
-->
<!-- Atomic-level Types -->
<!ENTITY % bin.base64 "CDATA">
<!ENTITY % bin.hex "CDATA">
<!ENTITY % boolean "(0 | 1)"> <!-- 0 is false, 1 is true -->
<!ENTITY % char "CDATA">
<!ENTITY % date "CDATA">
<!ENTITY % datetime.tz "CDATA"> <!-- Time zone is required -->
<!ENTITY % fixed.14.4 "CDATA">
<!ENTITY % i8 "CDATA">
<!ENTITY % int "%i8;">
<!ENTITY % r8 "CDATA">
<!ENTITY % number "CDATA"> <!-- No limit on number of digits, unlike
%r8; -->
<!ENTITY % string "CDATA">
<!ENTITY % time.tz "CDATA"> <!-- Time zone is required -->
<!ENTITY % duration "CDATA"> <!--ISO8601 duration http://www.w3.org/TR/xmlschema-2/#duration -->
<!ENTITY % ui8 "CDATA">
<!ENTITY % uint "%ui8;"> <!-- Unique to this specification -->
<!ENTITY % uri "CDATA">
<!ENTITY % uuid "CDATA">
<!-- Higher-level Types -->
<!--
NOTE: The following is a temporary hack to allow empty values for
some attributes with these types. The nmtoken entity should resolve to
NMTOKEN.
-->
<!ENTITY % nmtoken "CDATA"> <!-- Any combination of XML name chars. -->
<!ENTITY % isoLangCode "%nmtoken;"> <!-- ISO 639 Language Code -->
<!ENTITY % isoCountryCode "%nmtoken;"> <!-- ISO 3166 Country Code -->
<!ENTITY % isoCurrencyCode "%nmtoken;"> <!-- ISO 4217 Currency Code -->
<!ENTITY % xmlLangCode "%nmtoken;"> <!-- Language code as defined by XML
recommendation: Language and
country. -->
<!ENTITY % URL "%uri;">
<!--
For cXML license agreement information, please see
http://www.cxml.org/home/license.asp
$Id: //ariba/cxml/schema/Modules/Base.mod#8 $
-->
<!--
This file defines the basic elements used to build higher level
constructs in cXML.
-->
<!-- Basic Name/Data Elements -->
<!--
Name is used to provide an identifier for other elements.
xml:lang
The language in which the name is written.
-->
<!ELEMENT Name (#PCDATA)> <!-- string -->
<!ATTLIST Name
xml:lang %xmlLangCode; #REQUIRED
>
<!--
An Extrinsic is an element which can be used to extend the data
associated with known elements.
Since this Element is of type ANY, it could contain any arbitrary XML
document within itself, or a binary ![CDATA[]] document.
name
Name used to identify this extrinsic.
-->
<!ELEMENT Extrinsic ANY>
<!ATTLIST Extrinsic
name %string; #REQUIRED
>
<!--
Description is a string which describes something.
Though text may be interspersed with ShortName elements in this content
model, placing the ShortName at the beginning or end of the element is
much preferred. At most one ShortName element is allowed per
Description. The intended content model would be more like
(( ShortName, #PCDATA ) | ( #PCDATA | ShortName? )) if DTD syntax
supported it.
xml:lang
The language in which the description is written.
-->
<!ELEMENT Description ( #PCDATA | ShortName )* > <!-- mixed: string and
ShortName -->
<!ATTLIST Description
xml:lang %xmlLangCode; #REQUIRED
>
<!--
A short string which describes something in fewer characters than the
entire Description. This should be used when limited space is available.
For example, a table of elements might show the ShortName's of each. A
linked "details" view would show the entire Description (including the
ShortName). Without a ShortName, the user interface must default to a
truncation of the Description.
This element does not require an xml:lang attribute since it appears only
within a Description element. The language of the ShortName must match
that of the surrounding Description.
-->
<!ELEMENT ShortName (#PCDATA)> <!-- string -->
<!-- Telephone Number Elements -->
<!--
International ITU dial code for the country code in question. This
code would be entered after any escape code necessary to begin
International dialing. That is, the escape code does not appear in the
content of this element.
isoCountryCode
The ISO 3166 2-letter country code for the dial code in question.
-->
<!ELEMENT CountryCode (#PCDATA)> <!-- uint -->
<!ATTLIST CountryCode
isoCountryCode %isoCountryCode; #REQUIRED
>
<!--
The areacode or city code within a CountryCode.
-->
<!ELEMENT AreaOrCityCode (#PCDATA)> <!-- uint -->
<!--
The local number part of a telephone number.
-->
<!ELEMENT Number (#PCDATA)> <!-- string -->
<!--
An extension within relative to the Number element. This element has no
meaning without an associated Number element.
-->
<!ELEMENT Extension (#PCDATA)> <!-- uint -->
<!--
TelephoneNumber represents international telephone numbers.
-->
<!ELEMENT TelephoneNumber (CountryCode, AreaOrCityCode, Number, Extension?)>
<!--
Phone is a "named" TelephoneNumber.
name
specifies an identifier which indicates the type of phone number.
US examples would include "work","home", etc.
-->
<!ELEMENT Phone (TelephoneNumber)>
<!ATTLIST Phone
name %string; #IMPLIED
>
<!--
Fax number.
-->
<!ELEMENT Fax (TelephoneNumber | URL | Email)>
<!ATTLIST Fax
name %string; #IMPLIED
>
<!-- Addressing Elements -->
<!--
URL. A string which represents a URL
-->
<!ELEMENT URL (#PCDATA)> <!-- URL -->
<!ATTLIST URL
name %string; #IMPLIED
>
<!--
An email address. Address must conform to RFC 821 (SMTP Standard).
preferredLang
optional language that the email owner prefers to receive
emails in. Refer to the definition of xmlLangCode entity.
-->
<!ELEMENT Email (#PCDATA)> <!-- string -->
<!ATTLIST Email
name %string; #IMPLIED
preferredLang %xmlLangCode; #IMPLIED
>
<!--
Contact represents an entity at a location. The nature of this
element is that it represents a communication "end point" for a
location.
role
Position this person or group plays in the procurement process.
Likely values include endUser, administrator, purchasingAgent,
technicalSupport, customerService, sales,
supplierCorporate, supplierMasterAccount, supplierAccount,
buyerCorporate, buyerMasterAccount, buyerAccount, buyer,
subsequentBuyer. Other values may be allowed in some cases.
from and to roles are reserved for future use.
addressID
An id for the address. Needed to support address codes for
relationships that require id references.
-->
<!ELEMENT Contact (Name, PostalAddress*, Email*, Phone*, Fax*, URL*)>
<!ATTLIST Contact
role NMTOKEN #IMPLIED
addressID %string; #IMPLIED
>
<!--
The DeliverTo part of an Address. This would be internal to the actual
address know to the outside world. Similar to what an extension is to a
TelephoneNumber.
-->
<!ELEMENT DeliverTo (#PCDATA)> <!-- string -->
<!--
Street is a single line of an Address' location.
-->
<!ELEMENT Street (#PCDATA)> <!-- string -->
<!--
City is the name of the city in an Address' location.
-->
<!ELEMENT City (#PCDATA)> <!-- string -->
<!--
State is an optional state identifier in an Address' location.
-->
<!ELEMENT State (#PCDATA)> <!-- string -->
<!--
PostalCode (I have no idea how to describe it)
-->
<!ELEMENT PostalCode (#PCDATA)> <!-- string -->
<!--
Country is the name of the country in an Address' location. The
content of this element is a string which may (for example) be printed
directly to a shipping label. The content is the human-readable
equivalent of the isoCountryCode used by applications.
isoCountryCode
The ISO 3166 2-letter country code for this country.
-->
<!ELEMENT Country (#PCDATA)> <!-- string -->
<!ATTLIST Country
isoCountryCode %isoCountryCode; #REQUIRED
>
<!--
PostalAddress is a real-world location for a business or person.
-->
<!ELEMENT PostalAddress (DeliverTo*, Street+, City, State?,
PostalCode?, Country)>
<!ATTLIST PostalAddress
name %string; #IMPLIED
>
<!--
Address is the association of a Contact and an Location.
isoCountryCode
The ISO 3166 2-letter country code for the country containing this
location.
addressID
An id for the address. Needed to support address codes for
relationships that require id references. An example would be a
shipping code.
-->
<!ELEMENT Address (Name, PostalAddress?, Email?, Phone?, Fax?, URL?)>
<!ATTLIST Address
isoCountryCode %isoCountryCode; #IMPLIED
addressID %string; #IMPLIED
>
<!-- Financial Elements -->
<!--
Money is the representation of the object used to pay for items.
currency
specifies the currency in which amount is stated, must conform to ISO
4217 currency codes.
alternateAmount
the amount of money in the alternateCurrency. Optional and used to
support dual-currency requirements such as the Euro.
alternateCurrency
specifies the currency in which the alternateAmount is stated, must
conform to ISO 4217 currency codes.
-->
<!ELEMENT Money (#PCDATA)> <!-- number -->
<!ATTLIST Money
currency %isoCurrencyCode; #REQUIRED
alternateAmount %number; #IMPLIED
alternateCurrency %isoCurrencyCode; #IMPLIED
>
<!--
Optional textual child for communicating arbitrary comments or
description along with the parent.
Though text may be interspersed with Attachment elements in this content
model, grouping the Attachment list at the begging or end of the element
is much preferred. The intended content model would be more like
(( Attachment+, #PCDATA ) | ( #PCDATA | Attachment* )) if the DTD syntax
supported it.
xml:lang
The language in which the Comments are written. This attribute
will be required in a future version of cXML. (Leaving it out is
deprecated.)
-->
<!ELEMENT Comments ( #PCDATA | Attachment )* > <!-- mixed: string and
opt. Attachment list -->
<!ATTLIST Comments
xml:lang %xmlLangCode; #IMPLIED
>
<!--
Optional child of Comments element referencing a part in a multipart MIME
transmission.
The contained URL must use the scheme "cid:". This is the identifier for
the referenced attachment within the larger transmission. Must match the
Content-ID header of one (and only one) part of the MIME transmission
containing this cXML document. May also be used to retrieve the
attachment file separately.
-->
<!ELEMENT Attachment (URL)>
<!---
Reference to a remote attachment.
AttachmentReference is used inside Extrinsic elements that have a
predefined name of "Attachments".
In the context of AttachmentReference, the domain attribute of
InternalID is currently optional. However, as a way to prevent
circular request paths, the sending application may use a
predefined value of "local" to indicate that the attachment
requested is local to the other application.
length
length of the attachment in bytes.
-->
<!ELEMENT AttachmentReference (Name, Description, InternalID)>
<!ATTLIST AttachmentReference
length %uint; #IMPLIED
>
<!--
Price per unit of item.
-->
<!ELEMENT UnitPrice (Money)>
<!--
Reference to an earlier document (for example, OrderRequest). In a
StatusUpdateRequest, this element identifies the purchase order to be
updated.
payloadID
A unique identifier for the document. Copied directly from the
cXML element of the original document.
-->
<!ELEMENT DocumentReference EMPTY>
<!ATTLIST DocumentReference
payloadID %string; #REQUIRED
>
<!ELEMENT InternalID (#PCDATA)> <!-- string -->
<!ATTLIST InternalID
domain %string; #IMPLIED
>
<!-- ====
Common to most variants of the PunchOut transaction set. Defined here
to be easily shared between multiple DTD files without requiring
inclusion of Transaction.mod in all of them.
All of the PunchOut transaction sets include an originating Request
(ProviderSetupRequest for example), relatively simple Response
(PunchOutSetupResponse for example) and final Message
(ProviderDoneMessage or PunchOutOrderMessage). The Request and
Response comprise a back-end transaction between two cooperating
applications that wish to extend an interactive session from one to the
other. The Request provides the destination application with
authentication, identification and other setup information. The
Response provides the originating application with a unique starting
location for the interactive (HTML) session at the destination system.
After receiving a Response of this type, the originating application
redirects the user's browser to the provided location. (For some
non-HTML applications, opening a new browser window at that location
may be more appropriate.) The destination system eventually provides
an HTML form to the user's browser. This form submits the final
Message to close the remote session, return that user to the
originating application and carry any required information back to the
originating application.
==== -->
<!--
OriginatorCookie - Identification of a specific PunchOut session. Used
in both originating Request and later Message that returns user to
originating application.
Note: The BuyerCookie element used in a 'regular' PunchOut transaction
(defined in Transaction.mod) is of type ANY. That does not seem
useful. The string required below better matches the needs for this
element. Future transactions similar to the PunchOut transaction will
use this element.
-->
<!ELEMENT OriginatorCookie (#PCDATA)>
<!--
BrowserFormPost - Location to which the user's browser must submit the
final Message. This location (carried in the originating Request) does
not need to be specific to a PunchOut session since the
OriginatorCookie is returned in the Message.
-->
<!ELEMENT BrowserFormPost (URL)>
<!--
SelectedService - Identification of a service offered by this provider
and requested in this transaction. Used only in the originating
Request.
-->
<!ELEMENT SelectedService (#PCDATA)>
<!--
StartPage - Location to which the user's browser must be redirected to
begin the interactive portion of the session at the remote site. The
destination system returns this information in the Response document.
This location must be specific to a particular session. It is
effectively a one time key, providing authenticated entry into the
destination system.
-->
<!ELEMENT StartPage (URL)>
<!--
ReturnData - Any information the originator must know about the
completed operation at the provider site. The ReturnValue is for
applications; the Name is for human consumption (direct presentation in
the User Interface of the application). Where appropriate for the
possible services, this element may appear in the final Message for a
PunchOut session.
name
An identifier for the data returned. Provides a meaning for the
contents of a ReturnData element.
-->
<!ELEMENT ReturnData (ReturnValue, Name)>
<!ATTLIST ReturnData
name %string; #IMPLIED
>
<!ELEMENT ReturnValue (#PCDATA)>
<!--
Defines a time range. The start and end can be unbounded
startDate
The starting date of the time range
endDate
The ending date of the range
-->
<!ELEMENT TimeRange EMPTY>
<!ATTLIST TimeRange
startDate %datetime.tz; #IMPLIED
endDate %datetime.tz; #IMPLIED
>
<!--
Defines a period in time.
startDate
The starting date of the period
endDate
The ending date of the period
-->
<!ELEMENT Period EMPTY>
<!ATTLIST Period
startDate %datetime.tz; #REQUIRED
endDate %datetime.tz; #REQUIRED
>
<!--
Must be a UN/CEFACT (Recommendation 20) unit of measure code.
-->
<!ELEMENT UnitOfMeasure (#PCDATA)> <!-- nmtoken -->
<!--
Defines a reference to a term which is defined
in another document.
termName
The name of the ID attribute containing the term.
term
The value of that attribute (i.e., the term itself).
-->
<!ELEMENT TermReference EMPTY>
<!ATTLIST TermReference
termName %string; #REQUIRED
term %string; #REQUIRED
>
<!--
Defines an optionally named monetary rate at which goods or services are
charged or paid.
Money
The amount of Money per UnitOfMeasure to be charged or paid.
UnitOfMeasure
Unit of measure.
TermReference
Identifies the definition of this UnitRate
(found, for example, in contracts, master agreements, and other documents
which may or may not be cXML documents).
-->
<!ELEMENT UnitRate (
Money,
UnitOfMeasure,
TermReference?
)>
<!--
The rate information used to define the rate of a purchase. For
example, this could be the total room rate for 4 nights of stay
at a hotel.
Total
The total amount for the rate. The total amount must equal
to quantity x UnitRate.
UnitRate
The single unit rate.
Description
Textual description for the rate. For example, hotel nightly rate.
Quantity
The quantity. For example, a 4 nights stay at a hotel will
have quantity set to 4 with UnitofMesure in UnitRate set to Day.
-->
<!ELEMENT Rate (Total, UnitRate, Description?)>
<!ATTLIST Rate
quantity %r8; #REQUIRED
>
<!--
The total for something.
-->
<!ELEMENT Total (Money)>
<!--
For cXML license agreement information, please see
http://www.cxml.org/home/license.asp
$Id: //ariba/cxml/modules/Version.mod#4 $
-->
<!--
Another top-level entity used in Transport.mod. Defined here to allow
easy updates to the release version of cXML without opening
Transport.mod. This should also provide an easy file to search for
the current release version string.
-->
<!-- cxml.version
Current default string for the cXML@version attribute. Corresponds to
the final directory of the SYSTEM identifier used in all up-to-date
cXML documents.
For easy parsing of this file, do not remove whitespace surrounding the
actual version string.
-->
<!ENTITY cxml.version "1.2.019" >
<!--
For cXML license agreement information, please see
http://www.cxml.org/home/license.asp
$Id: //ariba/cxml/schema/Modules/Supplier.mod#1 $
-->
<!--
Supplier of goods and services. Includes a list of SupplierIDs which
identify the Supplier.
corporateURL
URL to web site about the supplier
storeFrontURL
URL to web site where a user can shop or browse
-->
<!ELEMENT Supplier (Name, Comments?, SupplierID+, SupplierLocation*)>
<!ATTLIST Supplier
corporateURL %URL; #IMPLIED
storeFrontURL %URL; #IMPLIED
>
<!--
One of the locations for a supplier. Supplier location is
generally a physical location.
-->
<!ELEMENT SupplierLocation (Address, OrderMethods)>
<!--
OrderMethods is the list of methods by which one can order
from a supplier. The contact element is the technical contact
who should be able to assist with order processing issues.
The list is to be ordered by supplier preference, the first
element having the highest degree of preference.
-->
<!ELEMENT OrderMethods (OrderMethod+, Contact?)>
<!--
OrderMethod is a method for ordering. It is comprised of a
target address for the order and the protocol expected by
the address.
-->
<!ELEMENT OrderMethod (OrderTarget, OrderProtocol?)>
<!--
OrderTarget represents an address to which orders can be
sent.
-->
<!ELEMENT OrderTarget (Phone | Email | Fax | URL | OtherOrderTarget)>
<!--
OrderProtocol is the communication method to be used when
communicating an order to a supplier. An example would be "cXML".
-->
<!ELEMENT OrderProtocol (#PCDATA)> <!-- string -->
<!--
OtherOrderTarget represents an address which is not enumerated by
default in the OrderTarget Element. This may contain address targets
beyond the ability of this document to describe.
name
Optional name for target.
-->
<!ELEMENT OtherOrderTarget ANY>
<!ATTLIST OtherOrderTarget
name %string; #IMPLIED
>
<!--
Definition of a supplier id. A supplier id is a (domain, value)
pair so that suppliers have the flexibility to define their id's
according to an arbitrary convention (e.g., (DUNS, 12345),
(TaxID, 88888888)).
domain
the domain of the id
-->
<!ELEMENT SupplierID (#PCDATA)> <!-- string -->
<!ATTLIST SupplierID
domain %string; #REQUIRED
>
<!--
Defines a List of Suppliers that might be associated with a quote Item. Used in
ItemOut.
-->
<!ELEMENT SupplierList (Supplier+)>
<!--
For cXML license agreement information, please see
http://www.cxml.org/home/license.asp
$Id: //ariba/cxml/modules/Item.mod#6 $
-->
<!--
ID with which the item's manufacturer identifies the item.
-->
<!ELEMENT ManufacturerPartID (#PCDATA)> <!-- string -->
<!--
Name of the item's manufacturer.
xml:lang
The language in which the ManufacturerName is written. This
attribute will be required in a future version of cXML. (Leaving it
out is deprecated.)
-->
<!ELEMENT ManufacturerName (#PCDATA)> <!-- string -->
<!ATTLIST ManufacturerName
xml:lang %xmlLangCode; #IMPLIED
>
<!--
Classification is used to group items into similar categories.
domain
"name" of classification, ie., SPSC
-->
<!ELEMENT Classification (#PCDATA)> <!-- string -->
<!ATTLIST Classification
domain %string; #REQUIRED
>
<!--
LeadTime specifies, in days, the amount of time required to
receive the item.
-->
<!ELEMENT LeadTime (#PCDATA)> <!-- uint -->
<!--
How the supplier identifies an item they sell.
If SupplierPartID does not provide a unique key to identify the item,
then the supplier should generate a key which identifies the part
uniquely when combined with the SupplierID and SupplierPartID. The
key is called SupplierPartAuxiliaryID.
An example is where a Supplier would use the same PartID for an
item but have a different price for units of "EA" versus "BOX".
In this case, the ItemIDs should be:
<ItemID>
<SupplierPartID>pn12345</SupplierPartID>
<SupplierPartAuxiliaryID>EA</SupplierPartAuxiliaryID>
</ItemID>
<ItemID>
<SupplierPartID>pn12345</SupplierPartID>
<SupplierPartAuxiliaryID>
<foo>well formed XML here</foo>
</SupplierPartAuxiliaryID>
</ItemID>
In this case, the "foo" element must be defined in an internal subset
sent with the cXML document. Otherwise, parsers will not be able to
validate that document.
In a preferred approach, the sending application may escape the contained
XML using CDATA sections. This would appear as:
<SupplierPartAuxiliaryID>
<![CDATA[<foo>well formed XML here</foo>]]>
</SupplierPartAuxiliaryID>
Finally, the angle brackets could be escaped using XML character
entities. This might be a bit harder for humans to read. For example:
<SupplierPartAuxiliaryID>
<foo>well formed XML here</foo>
</SupplierPartAuxiliaryID>
-->
<!ELEMENT SupplierPartID (#PCDATA)> <!-- string -->
<!ELEMENT SupplierPartAuxiliaryID ANY>
<!--
A unique identification of an item. SupplierID is not required since
ItemIDs never travel alone.
ItemIDs used to define a Supplier/Commodity level Blanket Order Item should
use Empty SupplierPartID tag. These type of items do not have specific part numbers
at the time of placing the Blanket Order. There will be subsequent release orders
or invoices that will define the SupplierID.
-->
<!ELEMENT ItemID (SupplierPartID, SupplierPartAuxiliaryID?)>
<!--
ItemDetail contains detailed information about an item. All the data that
a user would want to see about an item instead of the bare essentials
that are represented in the ItemID.
LeadTime
time in days to receive the item
-->
<!ELEMENT ItemDetail (UnitPrice, Description+, UnitOfMeasure,
Classification+, ManufacturerPartID?,
ManufacturerName?, URL?, LeadTime?, Extrinsic*)>
<!--
Item details specific for items that describe blanket purchase order items.
This element should only be used for items in a purchase order of
type "blanket"
-->
<!ELEMENT BlanketItemDetail (Description+, MaxAmount?, MinAmount?,
MaxQuantity?, MinQuantity?,
UnitPrice?, UnitOfMeasure?,
Classification*, Extrinsic*)>
<!--
For cXML license agreement information, please see
http://www.cxml.org/home/license.asp
$Id$
-->
<!--
This element captures travel information. It could be one of four
types: air, car rental, hotel or rail.
AirDetail
Air travel detail.
CarRentalDetail
Car rental detail.
HotelDetail
Hotel detail.
RailDetail
Rail detail.
PolicyViolation
List of policy violations (if any) associated with this
travel line item.
Comments
Top level comments for this travel line item (if any). This
is not the policy violation comment but a top level comment
given by the user for this travel line item while in Travel
Booking Provider's web site.
TermsAndConditions
List of Terms and conditions (if any) associated with this
travel line item.
confirmationNumber
A unique confirmation number that is useful to both the
traveler and the vendor who is providing the service for this
travel line item. For example, hotel reservation number or
e-ticket number from the airline.
pnrLocator
Passenger Name Record (PNR) Locator that is useful to the
Travel Booking Provider.
quoteExpirationTime
Date and time that this quote will expire. This value is
normally supplied in the PunchoutOrderMessage. If no value is
supplied, it is assumed that there is no expiration time or
date for this quote.
-->
<!ELEMENT TravelDetail ((AirDetail | CarRentalDetail | HotelDetail | RailDetail),
PolicyViolation*,
Comments?,
TermsAndConditions?)>
<!ATTLIST TravelDetail
confirmationNumber %string; #REQUIRED
pnrLocator %string; #IMPLIED
quoteExpirationTime %datetime.tz; #IMPLIED
>
<!-- Air -->
<!--
Air detail information for the air trip.
TripType
Round Trip, One Way, or Multi Leg
AirLeg
Different air leg that makes up this air detail.
For example a round trip from SFO -> TPE with no stops
will have two air legs. One air leg from SFO -> TPE
and another from TPE -> SFO.
AvailablePrice
Other available airfare prices that the user did not pick.
Penalty
Penalty amount (if any). This is normally due to changes or
cancelation of the ticket.
-->
<!ELEMENT AirDetail (TripType,
AirLeg+,
AvailablePrice*,
Penalty?)>
<!--
Define a single leg in the air travel.
Vendor
Airline vendor name and information.
AirLegOrigin
Originating airport for this air leg.
AirLegDestination
Destination airport for this air leg.
BookingClassCode
Airline booking class code. This is the de-facto
airline standard. For example,
F, FN, P, R, A - first class
C, CN, D, J, I, Z - business class.
Y, YN, B, BN, M, H, V, VN, O, Q, QN, S,
K, KN, L, U, T, W - coach class.
Rate
Rate for this particular air leg. If specify, the total
of all the rate for the different air legs must add up
to the total the line item level.
Meal
Meal information for this air leg (if any)
travelSegment
Textual information to identify this travel segment.
This information is specific to the Travel Booking Provider.
departureTime
Departure date and time for this air leg
arrivalTime
Arrival date and time for this air leg
flightNumber
Flight number for this air leg
seatNumber
Seat number for this air leg
seatType
Seat type
aisle - Aisle
window - Window
middle - Middle
upgrade
Is this ticket an upgrade?
stops
The number of stop for this air leg.
0 if it is a direct flight. If no information is supplied
it is defaulted to 0.
equipment
The plane equipment information for this air leg
-->
<!ELEMENT AirLeg (Vendor,
AirLegOrigin,
AirLegDestination,
BookingClassCode?,
Rate?,
Meal*)>
<!ATTLIST AirLeg
travelSegment %string; #REQUIRED
departureTime %datetime.tz; #REQUIRED
arrivalTime %datetime.tz; #REQUIRED
flightNumber %string; #REQUIRED
seatNumber %string; #IMPLIED
seatType (window | aisle | middle) #IMPLIED
upgrade (yes) #IMPLIED
stops %r8; #IMPLIED
equipment %string; #IMPLIED
>
<!--
Originating airport for this Air Leg.
Airport
Originating airport
-->
<!ELEMENT AirLegOrigin (Airport)>
<!--
Destination airport for this Air Leg.
Airport
Destination airport
-->
<!ELEMENT AirLegDestination (Airport)>
<!--
Airport information that includes the iso airport code
Address
Physical adress of the airport.
airportCode
The 3 letter IATA airport code.
-->
<!ELEMENT Airport (Address?)>
<!ATTLIST Airport airportCode %string; #REQUIRED>
<!---
Meal information used by air, hotel and rail.
BookingClassCode
Code for the meal. For example, airlines use
B - Breakfast
C - Complimentary liquor
D - Dinner
F - Food for purchase
G - Food and beverage for purchase
H - Hot meal
K - Continental breakfast
L - Lunch
M - Meal
N - No meal service
O - Cold meal
P - Liquor for purchase
R - Refreshments
S - Snack or brunch
V - Refreshments for purchase
Description
Textual description of the meal, including any special needs
such as vegetarian or dairy-free.
-->
<!ELEMENT Meal (BookingClassCode?, Description?)>
<!-- Car Rental -->
<!--
Car rental information.
Vendor
Car rental vendor information.
CarRentalPickup
Pickup location for the rental car.
CarRentalDropoff
Drop off location for the rental car.
BookingClassCode
4 letter code for car.
1st Letter - M (Mini), E (Economy), C (Compact), S (Standard),
I (Intermediate), F (Full size), P (Premium), L (Luxury)
V (MiniVan), X (Special)
2nd Letter - B (2 door), C (2/4 door), D (4 door), T (Convertible),
F (Four wheel drive), V (Van), W (Wagon), S (Sport)
X (Special)
3rd Letter - A (Automatic), M (Manual)
4th Letter - R (A/c), N (No A/C)
CarRentalFee
Mutliple car rental fee can be specified to capture the
break down of different fees. The total of these fees must
add up to the total at the line item level.
LimitedMileage
Mileage limit information
AvailablePrice
Other available prices for car rental that the user did not pick.
travelSegment
Textual information to identify this travel segment.
This information is specific to the Travel Booking Provider.
pickupTime
The intended pickup date and time
dropoffTime
The intended dropoff date and time
-->
<!ELEMENT CarRentalDetail (Vendor,
CarRentalPickup,
CarRentalDropoff,
BookingClassCode?,
CarRentalFee+,
LimitedMileage?,
AvailablePrice*)>
<!ATTLIST CarRentalDetail
travelSegment %string; #REQUIRED
pickupTime %datetime.tz; #REQUIRED
dropoffTime %datetime.tz; #REQUIRED
>
<!--
Physical location where the rental car should be picked up. This
is either an Airport or off airport car rental location.
Airport
An airport location.
Address
Physical address of the car rental location
-->
<!ELEMENT CarRentalPickup (Airport | Address)>
<!--
Physical location where the rental car should be dropped off.
This is either an Airport or off-airport car rental location.
Airport
An airport location.
Address
Physical address of the car rental location
-->
<!ELEMENT CarRentalDropoff (Airport | Address)>
<!--
This specifies the quantity and the unit of measure of the mileage
limit.
UnitOfMeasure
Unit of measure either miles or kilometers.
quantity
The mileage limit amount.
-->
<!ELEMENT LimitedMileage (UnitOfMeasure)>
<!ATTLIST LimitedMileage
quantity %r8; #REQUIRED
>
<!--
Car rental fee information. CarRentalFee captures the actual
charges and fee that applies to this rental. Conditional charges
such as extra mileages that are over the mileage limit should not
be specified here but rather in the TermsAndConditions text.
Total
Total amount for this car rental fee. All the total for the rates
must add up to this amount.
Rate
The individual broken-down fee information.
type
Type of rate
baseRate - Base rental rate
additionalDriver - Additional driver fee
airportAccessFee - Airport Access fee
dropOffCharge - Drop off charge
vehicleLicensingFee - Vehicle lincensing fee
touristTax - Tourist tax
prepaidGasoline - Prepaid gasoline charge
navigationSystem - Navigation system
childSeat - Child seat charge
luggageRack - Luggage rack charge
collisionDamageInsurance - Collision damage insurance
liabilityInsurance - Liability insurance
mobilePhone - Mobile phone base charge
other - Other charges.
-->
<!ELEMENT CarRentalFee (Total, Rate*)>
<!ATTLIST CarRentalFee
type (baseRate | additionalDriver | airportAccessFee | dropOffCharge |
vehicleLicensingFee | touristTax | prepaidGasoline |
navigationSystem | childSeat | luggageRack | collisionDamageInsurance |
liabilityInsurance | mobilePhone | other) "baseRate"
>
<!-- Hotel -->
<!--
Hotel detail information.
Vendor
Hotel vendor information.
Address
Physical address of the hotel. This is might be different
from the address specified in the Vendor field as the vendor
address might be the head quarter address.
RoomType
The type of room reserved.
BookingClassCode
Hotel booking class code.
Meal
Any complementary meals that are included with the room. For
example, complementary continental breakfast.
Rate
Hotel rate information. Multiple rates can be specified. For
example, the night rate, valet parking rate, and other rates.
AvailablePrice
Other available prices that user did not pick. Available
prices can be from the same vendor or different vendor.
travelSegment
Textual information to identify this travel segment. This
information is specific to the Travel Booking Provider. -
Data Integrator import XSD / DTD error
Hi experts,
Really need your help here! I am trying to import an XSD or DTD schema into BODI. I have both the XSD and DTD which I generated from the XML source file, using Altova XMLSpy. BODI is allowing me to select the root element, but when I run the import, the memory usage on my PC against the BODI service goes to 1.5Gb, after which the following error is returned:
Unknown error when importing metadata. (BODI-1112416)
When I clear this error and try any other operations in the DI Designer I get out of memory errors and I have to close down the application and restart. I am running a 4Gb RAM, Intel Core Duo, Windows 7 laptop. I suspect the XSD / DTD structure is simply to large for BODI to parse. The XSD and DTD is about 500Kb in size and contain over 16000 rows when viewed in a text editor!
Any suggestions on how to process this XML in BODI will be greatly appreciated.
Regards,
JohannHi,
replace choice with sequence
<b><xsd:complexType>
<xsd:choice>
<xsd:element name = A type=xsd:string />
<xsd:element name= B type=xsd:string maxOccurs=unbounded />
</xsd:choice>
</xsd:complexType></b>
is handled identical to
<b><xsd:complexType>
<xsd:sequence>
<xsd:element name = A type=xsd:string minOccurs=0 />
<xsd:element name= B type=xsd:string
minOccurs=0 maxOccurs=unbounded />
</xsd:sequence>
</xsd:complexType></b>
Regards
Tarun Telang -
Exception while importing waveset.dtd file in IDM
Hi .
I am trying to import waveset.dtd file in IDM am i got exception
" An error occurred importing the file, although some of the file data may have been processed. ==> com.waveset.exception.XmlParseException: XML Error: 11:3: The markup in the document preceding the root element must be well-formed."
actually i am trying to add Cc field for email template.I have never come across the scenario to import the DTD file?
For email , you have to modify the template to incorporate the cc field -
We downloaded cxml 1.2 dtd from cxml.org and tried to import into XI external def. We imported cxml.dtd and received no errors. When accessing from message mapping and Message Type we are unable to import/select cXml dtd structures/messages.
How do we import cXml dtd message into XI?
We have tried to convert to a .xsd file using Xml Spy and are experience namespace errors.Hi Frank,
concerning namespaces the philosophies of DTD and XSD are not compatible (indeed the philosophy of DTD is not compatible with that of XML namespaces itself). As XI is completely XSD-based it is not able to deal with DTDs containing namespace information, although they are well-formed.
Other tools (like XMLSpy) may try to make a conversion anyway (on a somehow heuristic basis). The result of that maybe imported as External Definition, but sometimes it is necessary to make some adjustments to the XSD.
According other DTDs coming from cxml I cannot tell you, because I do not know. Anyway, the namespace information is an important information which cannot be left out. If the XML structure defined by cxml really uses xml namespaces, then DTDs are not a suitable way to describe this structure (as explained above). XML structures with namespaces should always be described using XSD.
Greetings Stephan -
Error while importing music in iMovie 11 From itunes 10
Error while importing music in iMovie 11
I have the same error explained in a other post which was still left unanswered
I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
after dragging a mp3 into it. When i preview the file in imovie it souds ok.
Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
Is there a solution for this problem?
Former post;
Re: Error while importing music in iMovie 09 from iTunes 09
Posted: Jul 24, 2010 8:08 AM in response to: vincentplaces
I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
There is one icon missing though.
As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
Any help guys?
iMac 27" Mac OS X (10.6.4)Hi
Due to some kind of copy protection in iTunes - I don't copy directly from this in iMovie
to my projects. (Most often the result of doing it in iMovie is a DVD without any sound)
I do
• In iTunes - collect needed audio into a new Playlist
• then burn this out as an Audio-CD .aiff (NOT .mp3)
• This CD I copy into a folder on my Mac (often containing other material that's connected to the project)
• And then I drag and drop these .aiff files into my movie project in iMovie.
This works Greatly and even more so when I do my DVD.
Yours Bengt W -
Error while importing a new CERT in oracle 10G B2B
Hi All,
I am trying to upload a new certificate in 10 G B2B server, its not updating a certificate, I am facing the below error while importing
Error
An error occurred when updating the certificate.
Error -: AIP-16001: The model validation engine failed due to an internal system error.
Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION.
Note: Please help me in resolving this ASAP.
Regards
SaiHi Sai,
It seems you are updating certificate in a delivery channel which is being used in a validated (or may be deployed) agreement. Please retire/purge any deployed configuration which is using that delivery channel and also make sure no such agreement is in valid state(which is using this delivery channel).
Regards,
Anuj -
Error while importing a table index.
Hi,
We are facing a problem while importing an index to the production region. Below are the details.
1. A secondary index was created on standard SAP table ILOA in DEV region.
2. The Index was successfully moved to the Quality system, without any glitches.
3. Due to some issue (releated to testing, for which we had to revert back the changes), we had to delete the index on ILOA in the DEV region. The transports were moved to the PPD region and hence, the index on ILOA was deleted in PPD also.
4. Once the issue related to testing was resolved, we again created an index on the table ILOA and moved it to PPD.
All these 4 mentioned steps happened successfully and in PPD there was no error while importing the transports.
But, while moving the above transports to the Production region, there was an error :
"Index ILOA~Y could not be activated
(E - No index ILOA~Y found with status M)"
Please note that Y is the name of the index that was created on the table ILOA.
The error code that we have got is "8".
Can anyone please shed any light on what the issue is?? WE cannot re-import the transports in to Production without analysing this issue,because our client doesnt permit that.
Thanks and eagerly awaiting a kind reply.
Regards,
Raghavendra.You've three transports - one to create the index, one to delete, and one to recreate. It could be that the the third one tried to run before the database had finished with the second?
Have you looked on SE14 for the actual status on production of the index?
matt -
Error while importing N Accounts to 1 Address with UCM Batch Manager
Hi,
I got a problem with importing Accounts using the UCM Batch Manager. Previous steps were loading the EIM Tables EIM_UCM_ORG and EIM_UCM_ADRPER. To associate addresses I used the column EIM_UCM_ADRPER.PAR_UCM_ACCNT_UID. No errors occured during an Enterprise Integration Mgr jobs to load the data into SDH tables.
The error described below occurs if I have N Accounts using one Address. Example:
h5. Account Name --> City --> Postal Code --> State --> Street
Account #1 --- Munich --- 80331 --- N/A --- Some Street 1
Account #2 --- Munich --- 80331 --- N/A --- Some Street 1
h5. If I try to get the Accounts into the Base tables using the UCM Batch Manager I get the following message from the log file:
ObjMgrBusCompLog Error 1 000003084c571160:0 2010-08-03 19:11:14 (odbccon.cpp (2097)) SBL-DBC-00111: An error has occurred writing to a record.
Please continue or ask your systems administrator to check your application configuration if the problem persists.
DBCLog DBCLogError 1 000003084c571160:0 2010-08-03 19:11:14 SQLError: [23000],[Microsoft][SQL Native Client][SQL Server]Cannot insert duplicate key row in object 'dbo.S_ADDR_PER'-Objekt with unique index 'S_ADDR_PER_U1'.
DBCLog DBCLogError 1 000003084c571160:0 2010-08-03 19:11:14 SQLError: [01000],[Microsoft][SQL Native Client][SQL Server]The statement has been terminated.
ObjMgrBusCompLog Error 1 000003084c571160:0 2010-08-03 19:11:14 (sqlobj.cpp (43735)) SBL-DAT-00381: A record that contains identical values to the record you have created already exists.
If you would like to enter a new record, please ensure that the field values are unique.
ObjMgrLog Error 1 000003084c571160:0 2010-08-03 19:11:14 (adptutils.cpp (5715)) SBL-EAI-04381: For instance of Integration Component 'Account_Business Address', using user key '[City] = "Munich" AND [Postal Code] = "80331" AND [State] = "N/A" AND [Street Address] = "Some Street 1"', a record with identical values already exists in the Siebel database.
Please ensure that the field values in the input message are unique.
EAISiebAdpt EAISiebAdptErr 1 000003084c571160:0 2010-08-03 19:11:15 [0] For instance of Integration Component 'Account_Business Address', using user key '[City] = "Munich" AND [Postal Code] = "80331" AND [State] = "N/A" AND [Street Address] = "Some Street 1"', a record with identical values already exists in the Siebel database.
Please ensure that the field values in the input message are unique.(SBL-EAI-04381) (0x75017d)
h5. Result:
Account #1 gets inserted with Record Type: "Source-Insert"
Account #2 will not be imported and gets Record Type: "Incomplete"
Does anyone know how to handle this problem?
Many Thanks
Sebastian
Edited by: user13098670 on 04.08.2010 06:34I have selected the option
Add new metadata and replace existing objetcs. But it is not importing. Also I tried other options like
1. deleting the existing mapping and tried.
2. Putting the mapping in recycle bin and try.
3. Take it from recycle bin.Even during taking it from recycle it is giving me the following error .
Error occurred importing mapping
<DWH_CMMDTY_INVC_FACT_MAP/DWH_CMMDTY_INVC_FACT_MAP>
(at line 141).
Detailed Error Message:
API2014: Internal Error: Error in createStage:
In above all cases it is giving me the error.
Could you please help? -
Javac(1.4.2) gives error in import statement
Hi All,
I am facing a surprising problem. I have 2 java class files. I write the import statement for second one in the first one. There is no package & these are in the same directory. I have compiled the second one. But when I try to compile the First one. Javac throws error at import statement like below :
D:\Clubs\oct\6>javac -d . ManojTest.java
ManojTest.java:1: '.' expected
import SessionBean;
^
1 error
My Java Files are as below :
import SessionBean;
public class ManojTest
public static void main(String args[])
//ManojTest.java
public class SessionBean
public static void main(String args[])
//SessionBean.java
I have compiled SessionBean.java successfully but when I try to compile ManojTest.java I get error mentioned above.
However this probelm comes when I use j2se 1.4.2.. but works in j2se 1.3.1..
Another way could be I use package structure.
But I can't do any of these, as I have to port my big project to j2se1.4.2.. from j2se1.3.1.. (Live project is running on Tomcat).
Problems is similar in Unix & Windows both.
Is this javac compiler issue or there is some setting which I can make.
I have already included . (dot) in PATH & CLASSPATH environment varibales.
Please help me out if there is any way around this, as i am stuck up in between
thank you
Manoj :confused:Use a package and then add that package in your classpathOr don't use a package, leave the file in the default (noname) package, and don't use the import statement. Java will find it in the default package without the import.
Explicit import statements from the default package are no longer allowed -
Order Import Erroring while importing closed Order
Hello,
I am working on importing closed order for historical purpose and order import is erroring without giving much details. I set the debug level to 5 and log file contains only one error' ORDER IMPORT FAIL DUE TO UNEXPECTED ERROR.
I am attaching the insert statements for headers and lines. Please review and hope to get a solution from one of the OM gurus here.
Thanks a bunch in advance.
Anant
INSERT INTO OE_HEADERS_IFACE_ALL
(ORIG_SYS_DOCUMENT_REF
,ORDER_SOURCE_ID
,ORG_ID
,ORDER_NUMBER
,ORDERED_DATE
,ORDER_TYPE_ID
,PRICE_LIST_ID
,SOLD_FROM_ORG_ID
,SOLD_TO_ORG_ID
,CUSTOMER_NUMBER
,TAX_EXEMPT_FLAG
,TRANSACTIONAL_CURR_CODE
,INVOICING_RULE_ID
,ACCOUNTING_RULE_ID
,PAYMENT_TERM_ID
,CREATION_DATE
,CREATED_BY
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,SALESREP_ID
,OPERATION_CODE
,CLOSED_FLAG --BOOKED_FLAG
,DROP_SHIP_FLAG
,SHIP_TO_ORG_ID
,INVOICE_TO_ORG_ID
,SHIP_FROM_ORG_ID
,ORIG_SYS_CUSTOMER_REF
,ORIG_SHIP_ADDRESS_REF
,ORDER_CATEGORY
,BOOKED_FLAG)
VALUES
('514' -- ORIG_SYS_DOCUMENT_REF
,1001 -- ORDER SOURCE ID
,'102' -- ORG ID
,10001006 -- ORDER NUMBER
,SYSDATE -- ORDERED_DATE
,1021 -- ORDER TYPE ID
,6024 -- PRICE LIST ID
,102 -- SOLD FROM ORG ID
,2632 -- SOLD TO ORG ID
,'UN1666' -- CUSTOMER NUMBER
,'S' -- TAX_EXEMPT_FLAG
,'USD' -- TRANS CURRENCY_CODE
,-2 -- INVOICING_RULE_ID
,1 -- ACCOUNTING_RULE_ID
,5 -- TERMS_ID
,SYSDATE -- CREATION_DATE
,1150 -- CREATED_BY
,1150 -- LAST_UPDATED_BY
,SYSDATE -- LAST_UPDATE_DATE
,-3 -- SALESREP_ID
,'INSERT' -- OPERATION CODE
,'Y' -- CLOSED FLAG
,'N' -- DROP SHIP FLAG
,NULL -- SHIP_TO_ORG_ID (SITE USE ID FROM RA_SITE_USES_ALL, SITE_USE_CODE = SHIP_TO)
,1712 -- INVOICE_TO_ORG_ID (SITE USE ID FROM RA_SITE_USES_ALL, SITE_USE_CODE = BILL_TO)
,103 -- SHIP FROM ORG ID
,NULL -- ORIG_SYS_CUSTOMER_REF
,NULL -- ORIG_SHIP_ADDRESS_REF
,'Order' -- ORDER CATEGORY
,'N') -- BOOKED_FLAG
COMMIT
INSERT INTO OE_LINES_IFACE_ALL
(ORDER_SOURCE_ID
,ORIG_SYS_DOCUMENT_REF
,ORIG_SYS_LINE_REF
,ORIG_SYS_SHIPMENT_REF
,INVENTORY_ITEM
,REQUEST_DATE
,ORDERED_QUANTITY
,ORDER_QUANTITY_UOM
,PRICE_LIST_ID
,UNIT_SELLING_PRICE --UNIT_LIST_PRICE
,ACCOUNTING_RULE_ID
,PAYMENT_TERM_ID
,SALESREP_ID
,CREATION_DATE
,CREATED_BY
,LAST_UPDATE_DATE
,LAST_UPDATED_BY
,OPERATION_CODE
,DROP_SHIP_FLAG
,SHIP_TO_ADDRESS1
,SHIP_TO_ADDRESS2
,SHIP_TO_CITY
,SHIP_TO_POSTAL_CODE
,SHIP_TO_sTATE
,SHIP_TO_COUNTRY
,CLOSED_FLAG
,ITEM_TYPE_CODE
,INVENTORY_ITEM_ID
,DELIVERY_LEAD_TIME
,DELIVERY_ID
,TAX_EXEMPT_FLAG)
VALUES
(1001 -- ORDER SOURCE ID
,'514' -- ORIG SYS DOC REF
,'L4' -- ORIG SYS LINE REF
,NULL -- ORIG SYS SHIP REF
,'KR4R362478-07' -- ITEM NUMBER
,SYSDATE -- REQUEST DATE
,40 -- ORDER QTY
,'EA' -- ORDER QTY UOM
,6024 -- PRICE LIST ID
,95 -- UNIT LIST PRICE
,1 -- ACCOUNTING RULE ID
,5 -- PAY TERM ID
,-3 -- SALESREP ID
,SYSDATE -- CREATION DATE
,1150 -- CREATED BY
,SYSDATE -- LAST UPDATE DATE
,1150 -- LAST UPDATED BY
,'INSERT' -- OPERATION_CODE
,'N' -- DROP SHIP FLAG
,NULL --'1003 WASHINGTON AVE' -- SHIP ADD1
,NULL --'SUITE 340' -- SHIP ADD2
,NULL -- 'CHICAGO' -- CITY
,NULL -- 60610 -- POSTAL
,NULL -- 'IL' -- STATE
,NULL -- 'US') -- COUNTRY
,'Y'
,'FG'
,7488
,1
,1
,'Y')
commit
---------------------------------------Ganapati,
Did you try passing the customer_number like -1 or some random high number that does not exist in hz_cust_accounts table in the account_number for party_type='PERSON' in the table oe_customer_info_iface_all?
As I see this check for the first_name||last_name is done only of the customer number is not passed and customer_number is not used any where in the customer creation (if you are using automatic numbering for the customer accounts then you will obviously not passing any value to new_account_number which is used to created).
Give it a try while I keep myself busy with my airport woes here.
Thanks
Nagamohan -
MII 14.0 SP4 :Migration error while importing SAP BM Templates
Hi Experts,
I am facing some migration errors while importing SAP Batch Manufacturing Templates into MII 14.0 SP4.
There are almost 23 transactions which are not getting imported and the error message for all of them is-
"Unable to migrate transaction Unable to import file
<Name of the Transaction>"
Any first hand experiences will be really helpful for me to proceed further.
Regards,
Muddassar KhanHi All,
Got the solution. The STARTUP.BAT file is been placed in the installation directory(usr/sap) and then it works fine. Also I have installed the patches and all working fine.
Any way thanks for the answer christian libich.
Regards
G.Partheeban -
Error while import PAR with schedule task
Hi everybody
I've the following error while import a new PAR with schedule task in Portal NW04s
Inner Stack is:
Unable to lock the local configuration to run import "import_it.tsf.pld.cercapersone.updateadgruppofs.st.prjconfig_config_fwk_service_4692550,4692550_(ready)".
System error is "LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"".
Inner Stack is:
LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"
at com.sapportals.config.fwk.data.ConfigLockManager.lockWithDependent(ConfigLockManager.java:507)
thanks in advanceHi Ram,
I've encountered the problem only on productive instance with offline deployment (Scheduler Tasks reinitialize CRT). Before a restart I have to make sure it works.
thanks for your help!
Gennaro -
Error: An error occurred importing the file. Detail: File does not exist or
Hi,
I am getting the error the below error while importing the file in FDM. I have read and write access to the folder. I tried loading text and excel files, I am getting the same error.
An error occurred importing the file.
Detail: File does not exist or access denied.
Thanks.Hi Tony,
Thanks for the reply.
I have Oracle Database and the version is 11.1.0.7; So even for this version do I need to have SQLLDR.exe on the server where FDM is installed.
Thanks,
Edited by: user10720012 on May 16, 2011 11:42 AM -
Error While Importing a MDL file
Hi Guys,
Here I have a requirement of cloning one module of UAT system as like Prod. I exported the MDL file of that module and trying to import into UAT. The UAT system already has that module, but I want to override the existing mappings.
When I try to import, OWB is throwing an error.
To give brief about the actual items, I have a Project (FFH1) in Prod and one of the modules (STG1) need to be copied.
Here below the error Message:
MDL1261: Error importing PROJECT FFH1.
Detailed Error Message:
MDL1406: Cannot import PROJECT with physical name <FFH1> matching by object identifier because a PROJECT <FFH> with the same business name <FFH_1_3> but different object identifier already exists.
Import ended at Oct 12, 2009 12:58:20 PM
Can any one suggest me How to overcome this error Or How to achieve my requirement of copying a single module to another repository.
Edited by: [email protected] on Oct 12, 2009 2:36 AMHi
i have got a similar error - the difference is that I have one repository and one of the mappings was deleted. When I tried to import it from an export which was taken earlier in the day and no change was made to any of the mappings in the project except the action of the offending mapping been deleted I got the following error:
Import started at Jan 6, 2010 3:28:07 PM
Informational at line 10: MDL1205: PROJECT with Unique Object ID (UOID) <63B9EC83C5BA270CE04400306EF32B09> already exists, so PROJECT with name <COSMOS_MIGRATION> not imported.
Informational at line 11: MDL1205: ORACLE_MODULE with Unique Object ID (UOID) <6561D379074111DFE04400306EF32B09> already exists, so ORACLE_MODULE with name <COSMOS_MIGRATION.STG_OWB> not imported.
Error at line 2,107: MDL1261: Error importing ATTRIBUTE COSMOS_MIGRATION.STG_OWB.WIP_LOADED_SPREADSHEETS_DATA.XXCONV_OP_SEQ_NUMBER.INOUTGRP1.TARGET_QTY.
Detailed Error Message:
MDL1406: Cannot import ATTRIBUTE with physical name <TARGET_QTY> matching by object identifier because a ATTRIBUTE <COSMOS_MIGRATION.STG_OWB.WIP_LOADED_SPREADSHEETS_DATA.BASIS> with the same business name <INOUT1_5> but different object identifier already exists.
Import ended at Jan 6, 2010 3:28:11 PM
I then tried to do the import matching on name but got the following error.
Import started at Jan 6, 2010 3:38:57 PM
Informational at line 10: MDL1207: PROJECT with name <COSMOS_MIGRATION> not imported because it already exists.
Informational at line 11: MDL1207: ORACLE_MODULE with name <COSMOS_MIGRATION.STG_OWB> not imported because it already exists.
Informational at line 37: MDL1292: Skipping MAPPING <COSMOS_MIGRATION.STG_OWB.WIP_INSTANCES> because it was not requested for import.
Informational at line 450: MDL1292: Skipping MAPPING <COSMOS_MIGRATION.STG_OWB.WIP_JOBS_WORK_ORDERS> because it was not requested for import.
Error at line 2,107: MDL1261: Error importing ATTRIBUTE COSMOS_MIGRATION.STG_OWB.WIP_LOADED_SPREADSHEETS_DATA.XXCONV_OP_SEQ_NUMBER.INOUTGRP1.TARGET_QTY.
Detailed Error Message:
MDL1408: Cannot import ATTRIBUTE with physical name <TARGET_QTY> matching by physical name because a ATTRIBUTE <COSMOS_MIGRATION.STG_OWB.WIP_LOADED_SPREADSHEETS_DATA.BASIS> with the same business name <INOUT1_5> but different physical name already exists.
This attributes that the messages are referring to are columns in a table and I can't see where I can change a business name and physical name of a column in a table. What I don't understand is that this mapping created ok, deployed, ran and was included in an export and at no time did an error appear. It first appeared when trying to import it back into the project.
Has anyone got any ideas how I could get this mapping imported?
Thanks
Edwin
Maybe you are looking for
-
How can I delete all my mail from my computer, but leave it all on .Mac ?
How can I delete all my mail ( 3.5 ) on my computer ( original G4 ) but leave it all on the .Mac servers?
-
OpenGL 3.0 in After Effects
Is it worth trying to get OpenGL 3.0 in After Effects? My card is the GTX 780 that supports OpenGL 4.3. But After Effects shows me at 2.1.2 version. I've read many threads that say OpenGL in After Effects is worthless. These threads were a few years
-
PSE8 Can't save changes and replace original .jpg with edited
Hello, After editing any .jpg, can't save the changes and replace the original with the edited one "because the file is already in use or was left open". I have to save it with other name. I'm working with PSE8 and OS X 10.9.1 Any help would be welco
-
Ad pages open on their own and screen is unresponsive.
I have even erased my iPad and started over. At times the screen is unresponsive. Other times, the iPad starts typing on its own, pages flash open and closed. Even pages I've never opened, to my knowledge, start popping up. Hardware issues?
-
I want to download the calendar subscription for the jewish holidays. i cant find one.
hi i want to download the calendar subscription for the jewish holidays and i cant find one.