Error on JDeveloper 9i compilation

Hi
I am getting the following error when I try to compile my project.
"Error: can't read: C:\jdeveloper\jdevhome\jdev\myprojects\oracle\apps\per\selfservice\mgrviews\server\PersonAsgSummaryVOImpl.java"
The file it is referring to was obtained from our LIVE apps server oracle hierarchy - but appears to be empty if an attempt is made to open it in JDeveloper.
It is the same as the copy of the file in the 'myclasses' leg of my jdevhome.
Does this mean the file is corrupt?
How do I go about getting a replacement?
Can provide server patch level and pc JDeveloper version level details if required.
Thanks
Jane

Thanks for your response.
I had already tried this using the green + button in JDeveloper - but it does not seem to overwrite the file that is already in myclasses.
In the past I have had to start again with my project to overcome this problem - I did see another post which suggested that if any files were deleted manually from the file system it caused this problem.
I will try rebuilding (it is only a small project).

Similar Messages

JDeveloper Line Compiler and Generics

Hello all. Well it's great to finally have a fully Java 6 compatible JDeveloper. I have run into a problem with
generics however. Consider the following code:
public class MyMessageFactory
public static <Type extends MyMessageType> Type getInstance()
Type rtnObj;
// some code
return rtnObj;
where MyMessageType is defined as an abstract class:
public abstract class MyMessageType
So far everything is good. When I refer to the above method in another class however, the line compiler complains that I am
equating to an incompatible type:
MyMessageImpl myMessageImpl = MyMessageFactory.getInstance();
When I use NetBeans or Eclipse I do not get this error. However the JDeveloper line compiler forces me to use a cast:
MyMessageImpl myMessageImpl = (MyMessageImpl)MyMessageFactory.getInstance();
Anyone have any ideas on what may be wrong here?

What is wrong is that there is a bug in Audit and also in the OJC compiler. Sorry about that. I filed bugs to have this fixed.
Please use the cast to avoid the bugs.
Keimpe Bronkhorst
JDev IDE team

"Error: out of memory" compiling JSPÂ´s

Our web application contains about 5000 JSPÂ´s and 900 java files and every time I want to make the project I get the message "Error: out of memory" compiling the JSPÂ´s despite already using the JVM option -Xmx850M to enlarge the heap size. It is not possible to use any higher value than 850M because this results in following error message launching JDeveloper.
D:\jdevj2ee1013\jdev\bin>jdev.exe
Error occurred during initialization of VM
Could not reserve enough space for object heap
The computer I use for development has 2GB of memory and JDeveloper is the only application running, therfor there must be enough memory available.
If I deactivate "Make Project before running" IÂ´m able to launch the application and debug JSPÂ´s, but every time a page is called itÂ´s recompiled, even if it has not changed, which costs a lot of time.
Is it possible to disable the JSP translation in the development process and only translate and compile the JSPÂ´s at request time in the embeded OC4J and make sure that this happens only once if the JSP has not changed?

I have solved the problem. I removed the transition, "Light Slice" from PulpFx. It was giving me trouble earlier. I don't know why, or if it's fixable and able to be used in the future, but I can render 100% after that effect is removed from the footage/sequence.

Error while executing the compilation process

Hi,
ISA Framework: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: javac: invalid flag: "/usr/sap/CJP/J06/j2ee/cluster/server2/apps/sap.com/crm~isauseradm/servlet_jsp/isauseradm/work/jsp_login XXXXXXXXXXX.java" Usage: javac <options> <source files> where possible options include: -g Generate all debugging info -g:none Generate no debugging info -g:{lines,vars,source} Generate only some debugging info -nowarn Generate no warnings -verbose Output messages about what the compiler is doing -deprecation Output source locations where deprecated APIs are used -classpath <path> Specify where to find user class files -sourcepath <path> Specify where to find input source files -bootclasspath <path> Override location of bootstrap class files -extdirs <dirs> Override location of installed extensions -d <directory> Specify where to place generated class files -encoding <encoding> Specify character encoding used by source files -source <release> Provide source compatibility with specified release -target <release> Generate class files for specific VM version -help Print a synopsis of standard options ].
We get this message periodically then we login to isauseradm-application or shopadmin-application.
How we can solve this issue? Why it's appears in system?
/nwa shows this error:
Process after commit failed - may be hanging internal locks mut be removed manually.
Where I can see hanging internal locks ?
Denis

to add some information,
in runtime workbench, component monitoring, performance monitoring and all other thing except message monitoring is OK.

[SOLVED] configure: error: cannot run C compiled programs

I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)

tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall.

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

Errors were found when compiling workflow in SharePoint Designer 2010

Hello there,
I've run into a interesting issue in SharePoint Designer 2010 when publishing a workflow. I now get the below error
Normally when I get this message I simply clear the SharePoint Designer 2010 cache described in this
article, however, in this case the issue still continued. Hence I started the process of trial and error and quickly realized that the Update Item action was the culprit. In this action I am updating approximately 70 columns. Currently, I have two such
actions running in sequence. When I added the third Update Item action to do the same, I started getting this error.
Has anyone else experienced this before? In the workflow I am currently working on I am going to have to using the Update Item action several times and update approximately 70 columns hence I am open to other ideas to do the same.
Thanks in advance.

Hi Entan Ming,
Thanks for your reply, Hope you are aware that while we create any new workflow using SharePoint Designer 2013. There are two ways (We can say Platforms) to create the new workflow 1. SharePoint
2010 and 2. SharePoint 2013.
If I choose second one I. e SharePoint 2013, and try to create, save and publish workflow it`s working fine. But whenever I select option no. 1 i.e. SharePoint 2010 Platform to create
the workflow, I am able to Create it , save it , but while I try to publish it I got an error:
Errors were found when compiling the workflow. The workflow files were saved but cannot be run.
When I click on Advance I got message:
Unexpected error on server associating the workflow
My question is that, I am not able to publish any workflow in SharePoint 2010 Platform, using SharePoint Designer 2013.
Before publishing a workflow, I click on ‘Check for errors’ button, there was no any error found.
Thanks & Regards Mr. Bajirao Shinde

Deployment error in JDeveloper 11.1.1.4 when deploying 11.1.1.3 application

We have built a bpm application using JDeveloper 11.1.1.3. Now we have upgraded the server to new version 11gR3 and have also upgraded our jdeveloper to 11.1.1.4.
We have opened in Jdeveloper(11.1.1.4) the exisitng bpm application developed in older version (11.1.1.3) and when trying to deploy the application to the 11gR3 server getting the following deployment error in jdeveloper:
06:53:04 PM] Weblogic Server Exception: weblogic.application.ModuleException:
[06:53:04 PM] Caused by: java.lang.ClassNotFoundException: oracle.bpel.services.datacontrol.types.Number
[06:53:04 PM] See server logs or server console for more details.
[06:53:04 PM] weblogic.application.ModuleException:
[06:53:04 PM] Taskflow deployment failed to deploy to server. oracle.jdeveloper.deploy.DeployException: Remote deployment failed
[06:53:04 PM] #### Deployment incomplete. ####
[06:53:04 PM] Remote deployment failed
This deployment error is happening only when the UI project is deployed along with the composite. When I open the Project Properties --> Library, I notice that a Library "ALE Component" is displayed in exclamation. Even after removing this library I am getting the same deployment error. Will be grateful if any help is suggested to this issue.

Yes, you need to update the library reference apparently. (I just started again.)
Try adding the following library ref to your weblogic.xml of UI project
<library-ref> <library-name>oracle.soa.worklist.webapp</library-name> <specification-version>11.1.1</specification-version> </library-ref>
Anthony

Getting error in JDeveloper 11.1.1.6 after Connecting to Content server

Hi,
We are getting below error in JDeveloper 11.1.1.6 after getting "success" to connect content server. We are able to connect to content server but repository is not being loaded into JDeveloper and it gives below error.
Please guide.
Performing action Properties...[ from oracle.jdeveloper.appresources.ApplicationResourcesWindow ]
oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic:May 10, 2012 6:57:31 PM oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic getItem
WARNING: An error occurred while accessing the content repository.
javax.naming.NamingException: May 10, 2012 6:57:31 PM oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic throwGeneric
ALL: An error occurred while accessing the content repository.
[Root exception is javax.jcr.RepositoryException: Error communicating with Content Server.]
     at oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic.throwGeneric(AbstractRepositoryLogic.java:35)
     at oracle.webcenter.content.internal.model.rc.JCRRepositoryLogic.getItem(JCRRepositoryLogic.java:145)
     at oracle.webcenter.content.internal.model.rc.ContentResource.init(ContentResource.java:219)
     at oracle.webcenter.content.internal.model.rc.ContentResource.getContentID(ContentResource.java:327)
     at oracle.webcenter.content.internal.model.rc.ContentResource.getResourceId(ContentResource.java:313)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listInternal(ContentDirContext.java:326)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:303)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:297)
     at oracle.jdeveloper.rescat2.nodes.RepositoryRootNode.loadCache(RepositoryRootNode.java:147)
     at oracle.jdeveloper.rescat2.nodes.ExtendedGenericNode$1.run(ExtendedGenericNode.java:296)
     at java.lang.Thread.run(Thread.java:662)
Caused by: javax.jcr.RepositoryException: Error communicating with Content Server.
     at oracle.jcr.impl.ExceptionFactory.repository(ExceptionFactory.java:122)
     at oracle.stellent.jcr.IdcPersistenceManager.getRootNode(IdcPersistenceManager.java:971)
     at oracle.stellent.jcr.IdcPersistenceManager.getResourceByAbsolutePath(IdcPersistenceManager.java:529)
     at oracle.jcr.impl.TransientLayer.getResourceByRelativePath(TransientLayer.java:455)
     at oracle.jcr.impl.OracleSessionImpl.getItem(OracleSessionImpl.java:1108)
     at oracle.jcr.impl.OracleSessionImpl.getItem(OracleSessionImpl.java:302)
     at oracle.webcenter.doclib.internal.model.JCRUtils.getNode(JCRUtils.java:55)
     at oracle.webcenter.content.internal.model.rc.JCRRepositoryLogic.getItem(JCRRepositoryLogic.java:125)
     ... 9 more
oracle.webcenter.content.internal.model.rc.ContentResource:May 10, 2012 6:57:32 PM oracle.webcenter.content.internal.model.rc.ContentResource getContentID
WARNING: An error occurred while accessing the content repository.
javax.naming.NamingException: May 10, 2012 6:57:31 PM oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic throwGeneric
ALL: An error occurred while accessing the content repository.
[Root exception is javax.jcr.RepositoryException: Error communicating with Content Server.]
     at oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic.throwGeneric(AbstractRepositoryLogic.java:35)
     at oracle.webcenter.content.internal.model.rc.JCRRepositoryLogic.getItem(JCRRepositoryLogic.java:145)
     at oracle.webcenter.content.internal.model.rc.ContentResource.init(ContentResource.java:219)
     at oracle.webcenter.content.internal.model.rc.ContentResource.getContentID(ContentResource.java:327)
     at oracle.webcenter.content.internal.model.rc.ContentResource.getResourceId(ContentResource.java:313)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listInternal(ContentDirContext.java:326)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:303)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:297)
     at oracle.jdeveloper.rescat2.nodes.RepositoryRootNode.loadCache(RepositoryRootNode.java:147)
     at oracle.jdeveloper.rescat2.nodes.ExtendedGenericNode$1.run(ExtendedGenericNode.java:296)
     at java.lang.Thread.run(Thread.java:662)
Caused by: javax.jcr.RepositoryException: Error communicating with Content Server.
     at oracle.jcr.impl.ExceptionFactory.repository(ExceptionFactory.java:122)
     at oracle.stellent.jcr.IdcPersistenceManager.getRootNode(IdcPersistenceManager.java:971)
     at oracle.stellent.jcr.IdcPersistenceManager.getResourceByAbsolutePath(IdcPersistenceManager.java:529)
     at oracle.jcr.impl.TransientLayer.getResourceByRelativePath(TransientLayer.java:455)
     at oracle.jcr.impl.OracleSessionImpl.getItem(OracleSessionImpl.java:1108)
     at oracle.jcr.impl.OracleSessionImpl.getItem(OracleSessionImpl.java:302)
     at oracle.webcenter.doclib.internal.model.JCRUtils.getNode(JCRUtils.java:55)
     at oracle.webcenter.content.internal.model.rc.JCRRepositoryLogic.getItem(JCRRepositoryLogic.java:125)
     ... 9 more
oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic:May 10, 2012 6:57:32 PM oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic listFolder
WARNING: An error occurred while accessing the content repository.
javax.naming.NamingException: May 10, 2012 6:57:32 PM oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic throwGeneric
ALL: An error occurred while accessing the content repository.
[Root exception is javax.jcr.RepositoryException: Error communicating with Content Server.]
     at oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic.throwGeneric(AbstractRepositoryLogic.java:35)
     at oracle.webcenter.content.internal.model.rc.JCRRepositoryLogic.listFolder(JCRRepositoryLogic.java:249)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listInternal(ContentDirContext.java:326)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:303)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:297)
     at oracle.jdeveloper.rescat2.nodes.RepositoryRootNode.loadCache(RepositoryRootNode.java:147)
     at oracle.jdeveloper.rescat2.nodes.ExtendedGenericNode$1.run(ExtendedGenericNode.java:296)
     at java.lang.Thread.run(Thread.java:662)
Caused by: javax.jcr.RepositoryException: Error communicating with Content Server.
     at oracle.jcr.impl.ExceptionFactory.repository(ExceptionFactory.java:122)
     at oracle.stellent.jcr.IdcPersistenceManager.getRootNode(IdcPersistenceManager.java:971)
     at oracle.stellent.jcr.IdcPersistenceManager.getResourceByAbsolutePath(IdcPersistenceManager.java:529)
     at oracle.jcr.impl.TransientLayer.getResourceByRelativePath(TransientLayer.java:455)
     at oracle.jcr.impl.OracleSessionImpl.getItem(OracleSessionImpl.java:1108)
     at oracle.jcr.impl.OracleSessionImpl.getItem(OracleSessionImpl.java:302)
     at oracle.webcenter.doclib.internal.model.JCRUtils.getNode(JCRUtils.java:55)
     at oracle.webcenter.content.internal.model.rc.JCRRepositoryLogic.listFolder(JCRRepositoryLogic.java:227)
     ... 6 more
Performing action Refresh[ from oracle.jdeveloper.appresources.ApplicationResourcesWindow ]
May 10, 2012 7:12:30 PM oracle.stellent.jcr.IdcPersistenceManager listFolder
SEVERE: Could not list contents of folder with ID = dCollectionID:-1
oracle.stellent.ridc.protocol.ServiceException: No service defined for COLLECTION_DISPLAY.
     at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:142)
     at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
     at oracle.stellent.jcr.IdcPersistenceManager.listFolder(IdcPersistenceManager.java:690)
     at oracle.stellent.jcr.IdcPersistenceManager.getChildResources(IdcPersistenceManager.java:648)
     at oracle.jcr.impl.TransientLayer.getChildResources(TransientLayer.java:534)
     at oracle.jcr.impl.FolderNode.getNodes(FolderNode.java:116)
     at oracle.webcenter.content.internal.model.rc.JCRRepositoryLogic.listFolder(JCRRepositoryLogic.java:233)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listInternal(ContentDirContext.java:326)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:303)
     at oracle.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:297)
     at oracle.jdeveloper.rescat2.nodes.RepositoryRootNode.loadCache(RepositoryRootNode.java:147)
     at oracle.jdeveloper.rescat2.nodes.ExtendedGenericNode$1.run(ExtendedGenericNode.java:296)
     at java.lang.Thread.run(Thread.java:662)
oracle.stellent.ridc.protocol.ServiceException: No service defined for COLLECTION_DISPLAY.
o.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:142)
o.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
o.stellent.jcr.IdcPersistenceManager.listFolder(IdcPersistenceManager.java:690)
o.stellent.jcr.IdcPersistenceManager.getChildResources(IdcPersistenceManager.java:648)
o.jcr.impl.TransientLayer.getChildResources(TransientLayer.java:534)
o.jcr.impl.FolderNode.getNodes(FolderNode.java:116)
o.webcenter.content.internal.model.rc.JCRRepositoryLogic.listFolder(JCRRepositoryLogic.java:233)
o.webcenter.content.internal.model.rc.ContentDirContext.listInternal(ContentDirContext.java:326)
o.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:303)
o.webcenter.content.internal.model.rc.ContentDirContext.listBindings(ContentDirContext.java:297)
o.j.rescat2.nodes.RepositoryRootNode.loadCache(RepositoryRootNode.java:147)
o.j.rescat2.nodes.ExtendedGenericNode$1.run(ExtendedGenericNode.java:296)
j.lang.Thread.run(Thread.java:662)
Regards,
Bhavesh

Thanks Srinath.
We have resolved the issue but we had to follow below steps as we were not able to see Folder_g in componet list.
1. After login to content server, navigated to Admin Server.
2. In Advanced component manager, we have updated component configuration with selecting Folder_g and press Update
3. After that we followed the steps 2 and 3 as you mentioned.
Regards,
Bhavesh

ERROR in JDEVELOPER: ORA-01882: timezone region not found

Hello All,
When i create new database connection with HR database (XE), I'm getting ORA-01882: timezone region not found error in jdeveloper.
Database Navigator->Create Database Connection
How to i fix this problem?
- JDeveloper 11.1.1.4
- Oracle Expression Edition 10g.
Thank you,
Erdenebayar.

Hi Erdenebayar,
How did u add the line in jdev.conf i tried by adding below variants but none worked. Can you please print exact line that you've added to jdev.conf and added to projects (I'm using jdev 11.1.1.4):
Variant 0)
-Duser.timezone="+05:30" (each projects run profile)
Variant 1)
AddVMOption -Duser.timezone='05.30' (line added to jdev.conf)
-Duser.timezone='05.30' (each projects run profile)
Variant 2)
AddVMOption -Duser.timezone='+05.30' (line added to jdev.conf)
-Duser.timezone='+05.30' (each projects run profile)
Variant 3)
AddVMOption -Duser.timezone='+05.30' (line added to jdev.conf)
-Duser.timezone='+05.30' (each projects run profile)
Variant 4)
AddVMOption -Duser.timezone="+05:30" (line added to jdev.conf)
-Duser.timezone="+05:30" (each projects run profile)
Variant 5)
AddVMOption -Duser.timezone="05:30" (line added to jdev.conf)
-Duser.timezone="05:30" (each projects run profile)
But none are resolving the issue.

"Error running javac.exe compiler" when using ant to compile Eclipse plugin

Hi
I encounter an error "Error running C:\jdk1.5.0_06\bin\javac.exe compiler" when building my project using ant1.7.
My project has 10 eclipse plugins, and each plugin is compiled by invoking following ant target

<target name="compilePlugin">
     
     
     <delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
     
     <delete file="${param.plugin.dir}/${param.plugin.targetJarFile}" quiet="true"/>
     <mkdir dir="${param.plugin.dir}/${build.dir}"/>
     
     <javac      srcdir="${param.plugin.dir}/${param.plugin.src.dir}"
               destdir="${param.plugin.dir}/${build.dir}"
               failonerror="${javacFailOnError}"
               verbose="${javacVerbose}"
               debug="${javacDebugInfo}"
               deprecation="${javacDeprecation}"
          optimize="${javacOptimize}"
               source="${javacSource}"
               target="${javacTarget}"
               fork="${param.fork}" memoryInitialSize="256m" memoryMaximumSize="512m">
          <classpath refid="compile.classpath" />
     </javac>
     
     <copy todir="${param.plugin.dir}/${build.dir}" failonerror="true">
          <fileset dir="${param.plugin.dir}/${param.plugin.src.dir}" excludes="**/*.java, **/package.htm*" />
     </copy>
     <jar jarfile="${param.plugin.dir}/${param.plugin.targetJarFile}" basedir="${param.plugin.dir}/${build.dir}"/>
     <delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
</target>
Since each of first 9 plugins contains less than 500 java source files, we always set "param.fork" to false when invoking this ant target.
For the 10th plugin, it has about 1000 source files. If we set "param.fork" to false, we will get the error "Error running javac.exe compiler". So we have to set "param.fork" to true when compiling it. This week, this plugin contains about 1250 files and we get the same error again when compiling it. I tried to increase the "memoryMaximumSize" to "768", but still couldn't get through it.
BTW, There are about 150 jar files in our classpath for compiling plugins. Do many jar files cause this problem?
Any help is highly appreciated.
Many thanks
Oceanman

I encountered a very similar error and I was able to resolve it by removing the following parameters from the javac task:
fork="${param.fork}"
memoryInitialSize="256m"
memoryMaximumSize="512m"My values were not the same as yours, before I removed them, the values were set to:
fork="true"
memoryInitialSize="256m"
memoryMaximumSize="256m" Not sure why this fixed my problem but it did. I was using Ant 1.7 and Java 1.6_07 hope this helps.

Error in Jdeveloper using WebCenter Framework

Hi All,
I am creating a sample application using webcenter framework in Jdeveloper. As i have installed the extensions of webcenter from HELP->Check For Updates -> webcenter extension. It was working fine but when i am trying to create the connection to content repository from Application Resources i am getting following error in Jdeveloper:-
An unexpected severe error has occurred in Jdeveloper and in error details the log was:-
oracle.classloader.util.AnnotatedNoClassDefFoundError:
Missing class: javax.jcr.Repository
*     Dependent class: oracle.vcr.jam.JamRepository*
*     Loader: ide-global:11.1.1.0.0*
*     Code-Source: /E:/Oracle/Middleware/jdeveloper/webcenter/modules/oracle.webcenter.framework_11.1.1/jcr-manager.jar*
*     Configuration: <classpath> in /file:/E:/Oracle/Middleware/jdeveloper/jdev/extensions/oracle.webcenter.content.dt.jar!/META-INF/extension.xml*
The missing class is not available from any code-source or loader in the system.
o.classloader.PolicyClassLoader.defineClass(PolicyClassLoader.java:2387)
o.classloader.PolicyClassLoader.findLocalClass(PolicyClassLoader.java:1546)
o.classloader.SearchPolicy$FindLocal.getClass(SearchPolicy.java:226)
o.classloader.SearchSequence.getClass(SearchSequence.java:119)
o.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1728)
o.classloader.PolicyClassLoader.access$000(PolicyClassLoader.java:143)
o.classloader.PolicyClassLoader$LoadClassAction.run(PolicyClassLoader.java:331)
j.security.AccessController.doPrivileged(Native Method)
o.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1692)
o.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
o.webcenter.internal.dt.config.ConnectionContextListener.<clinit>(ConnectionContextListener.java:81)
o.webcenter.internal.dt.addin.WebCenterFrameworkAddin$1.rescatContextRegistered(WebCenterFrameworkAddin.java:237)
o.j.rescat2.RescatContextRegistry.notifyContextRegistered(RescatContextRegistry.java:328)
o.j.rescat2.RescatContextRegistry.registerContext(RescatContextRegistry.java:93)
o.adf.share.dt.AppConnContext.getRescatContext(AppConnContext.java:221)
o.adf.share.dt.ApplicationConnectionsNode.applicationChanged(ApplicationConnectionsNode.java:94)
o.j.appresources.ApplicationResourcesWindow.notifyApplicationChanged(ApplicationResourcesWindow.java:298)
o.j.appresources.ApplicationResourcesNode.applicationChanged(ApplicationResourcesNode.java:66)
o.j.appresources.ApplicationResourcesWindow.applicationChanged(ApplicationResourcesWindow.java:236)
o.i.navigator.ApplicationNavigatorWindow.fireApplicationChangeEventImpl(ApplicationNavigatorWindow.java:990)
o.i.navigator.ApplicationNavigatorWindow.fireApplicationChangeEvent(ApplicationNavigatorWindow.java:974)
o.i.navigator.ApplicationNavigatorWindow.access$200(ApplicationNavigatorWindow.java:100)
o.i.navigator.ApplicationNavigatorWindow$1L.itemStateChanged(ApplicationNavigatorWindow.java:263)
jx.s.JComboBox.fireItemStateChanged(JComboBox.java:1205)
jx.s.JComboBox.selectedItemChanged(JComboBox.java:1262)
jx.s.JComboBox.contentsChanged(JComboBox.java:1309)
jx.s.AbstractListModel.fireContentsChanged(AbstractListModel.java:100)
jx.s.DefaultComboBoxModel.setSelectedItem(DefaultComboBoxModel.java:88)
jx.s.JComboBox.setSelectedItem(JComboBox.java:557)
jx.s.JComboBox.setSelectedIndex(JComboBox.java:603)
o.i.navigator.ApplicationNavigatorWindow.initSelectedApplication(ApplicationNavigatorWindow.java:1135)
o.i.navigator.ApplicationNavigatorWindow.initToolbarArea(ApplicationNavigatorWindow.java:1035)
o.ideri.navigator.DefaultNavigatorWindow.initCommonItems(DefaultNavigatorWindow.java:384)
o.i.navigator.ApplicationNavigatorWindow.getGUI(ApplicationNavigatorWindow.java:695)
o.i.docking.DockableWindow.getHostedComponent(DockableWindow.java:231)
o.ii.docking.TitledPanelHolder.getOrCreateComponent(TitledPanelHolder.java:47)
o.ii.docking.TitledPanel.setPageVisible(TitledPanel.java:881)
o.ii.docking.TitledPanel.showClient(TitledPanel.java:858)
o.ii.docking.TitledPanel.setClientVisible(TitledPanel.java:841)
o.ii.docking.TitledPanel.setClientVisible(TitledPanel.java:819)
o.ii.docking.TitledPanel.loadVisibilityLayout(TitledPanel.java:1789)
o.ii.docking.DockPanel.loadVisibilityLayout(DockPanel.java:200)
o.ii.docking.AbstractDockPanelHost.loadVisibilityLayout(AbstractDockPanelHost.java:94)
o.ii.docking.DockStationImpl.onStartup(DockStationImpl.java:1634)
o.ii.docking.DockStationImpl.loadLayout(DockStationImpl.java:1473)
o.ii.docking.DockStationListener.init(DockStationListener.java:36)
o.i.layout.Layouts.activate(Layouts.java:812)
o.i.layout.Layouts.activateLayout(Layouts.java:192)
o.ii.MainWindowImpl$6.runImpl(MainWindowImpl.java:728)
o.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
j.a.event.InvocationEvent.dispatch(InvocationEvent.java:199)
j.a.EventQueue.dispatchEvent(EventQueue.java:597)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
j.a.EventDispatchThread.run(EventDispatchThread.java:122)
Please Help!!!
Thanks..

http://puchaanirudh.blogspot.com/2008/04/oracleclassloaderutilannotatednoclassde.html
For jdeveloper errors.
I think all the required jars are not loaded during the installation.
I advice you , to download the jdeveloper again and update the webcenter files.

Error in Jdeveloper when making a WebService Proxy.

Hi,
I am trying to call a webservice from Forms. But when I try to create webproxy in Jdeveloper.As I enter the WSDL URL(http://localhost:7101/WebService-Annotation-context-root/MyCompanyPort?WSDL)in the webservice proxy wirzrd I recieve following error:
oracle.jdeveloper.webservices.model.WebServiceException
     at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1656)
     at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2846)
     at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2611)
     at oracle.jdeveloper.webservices.model.java.JavaWebService.<init>(JavaWebService.java:509)
     at oracle.jdeveloper.webservices.model.java.JavaWebService.<init>(JavaWebService.java:461)
     at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy$ProxyJavaWebService.<init>(WebServiceProxy.java:2268)
     at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.updateServiceModel(WebServiceProxy.java:1701)
     at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.setDescription(WebServiceProxy.java:525)
     at oracle.jdevimpl.webservices.wizard.jaxrpc.proxy.ProxyJaxWsSpecifyWSDLPanel.setDescription(ProxyJaxWsSpecifyWSDLPanel.java:238)
     at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel.buildModel(SpecifyWsdlPanel.java:1109)
     at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel$5.run(SpecifyWsdlPanel.java:661)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IllegalArgumentException
     at java.net.URI.create(URI.java:842)
     at oracle.jdeveloper.webservices.model.WebService.getURI(WebService.java:1009)
     at oracle.jdeveloper.webservices.model.WebService.getMappingFile(WebService.java:3960)
     at oracle.jdeveloper.webservices.model.java.JavaWebService.getMappingFile(JavaWebService.java:1810)
     at oracle.jdeveloper.webservices.model.java.JavaWebService.getSeiInfo(JavaWebService.java:1708)
     at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1496)
     ... 12 more
Caused by: java.net.URISyntaxException: Illegal character in path at index 0: MyCompanyWS
     at java.net.URI$Parser.fail(URI.java:2809)
     at java.net.URI$Parser.checkChars(URI.java:2982)
     at java.net.URI$Parser.parseHierarchical(URI.java:3066)
     at java.net.URI$Parser.parse(URI.java:3024)
     at java.net.URI.<init>(URI.java:578)
     at java.net.URI.create(URI.java:840)
     ... 17 more
The above error is what I get for my own webservice.
If I use the webserivce wsdl url(http://www.esendex.com/secure/messenger/soap/SendService.asmx?wsdl) which exsits from internet. I get the following error:
"No WSDL document found".
Please help how to overcome this error.
Thanks & Regards,
Noman

Hi Noman,
Can you try running the URL in the browser and check if you are able to "view" the wsdl?
For the second issue, i feel it could be because of the firewall / proxy issue. Try setting the proxy (if you are using one) in your jdeveloper-> Tools->Preferences->Web Browser and Proxy section.
-Arun
P.S : Post the JDeveloper version you are using in "all" the questions, which would help us to give precise answer. From the URL(http://localhost....), i guess you are using JDev 11.1.1.2.0, but you need to confirm.

Hi i am getting Innternal Error in jdeveloper IDE in side preferences- code editer- java

hi i am getting Innternal Error in jdeveloper IDE in side preferences->code editer->java
if u know something about this error psease share here
java.lang.NullPointerException
at oracle.jdevimpl.java.editing.JavaOptionsPanel.loadSettingsFrom(JavaOptionsPanel.java:186)
at oracle.jdevimpl.java.editing.JavaOptionsPanel.onEntry(JavaOptionsPanel.java:67)
at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:1220)
at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:1201)
at oracle.ide.panels.MDDPanel.access$1200(MDDPanel.java:128)
at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1657)
at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1525)
at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1519)
at javax.swing.Timer.fireActionPerformed(Timer.java:291)
at javax.swing.Timer$DoPostEvent.run(Timer.java:221)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
at java.awt.Dialog$1.run(Dialog.java:1046)
at java.awt.Dialog$3.run(Dialog.java:1098)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1096)
at java.awt.Component.show(Component.java:1585)
at java.awt.Component.setVisible(Component.java:1537)
at java.awt.Window.setVisible(Window.java:842)
at java.awt.Dialog.setVisible(Dialog.java:986)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:225)
at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:808)
at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:601)
at oracle.ide.ceditor.CodeEditorController.handleEvent(CodeEditorController.java:956)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:897)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
at java.awt.Component.processMouseEvent(Component.java:6289)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6054)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4652)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:617)
at java.awt.EventQueue$2.run(EventQueue.java:615)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

Hi,
make sure the IDE is installed with the proper JDK version
Frank

Error: Could not find compiled resource bundle 'components' for locale 'en_US'

We are porting a fairly large body of Flex3 code developed under FlexBuilder 3 to Flex4 under FlashBuilder 4. Most of the conversion appears to be working fine, with one exception. When I launch the Flex4 version, all my data interchanges with the server works. Just as it is about to show the UI, the following error occurs:
     Error: Could not find compiled resource bundle 'components' for locale 'en_US'
I am actually using a locale of fr_FR, but I assume it couldn't find that, reverted to en_US, failed again and then barfed. If I look in
     ~Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR
I see a lot of swc files, and of course no 'components.swc'. I believe the problem is that our Flex3 code is using mx components, and the compatibility mode is not properly handling it for some reason. I think this is mostly from our in-house UI library. The properties for that library (and for my main app I am testing now) have:
     - Use default SDK (currently "Flex 4.0")
     - Use Flex 3 compability mode
     - Use minimum version (Flash Player) required by the Flex SDK
     - Enable strict type checking
     - Enable warnings
I also tried putting the compatibility flag in the mxmlc compile line, with no change in behavior. This project is built by the following script:
ruby scripts/concat_properties.rb -o resources.properties ^
     src/main/flex/locale/fr_common/res_myname_fr_common.properties ^
     src/main/flex/locale/fr_common/scout/res_myname_scout_fr_common.properties ^
     src/main/flex/locale/fr_fr/res_myname_fr_fr.properties ^
     ../../scout/common/src/locale/fr_common/mypals/resources.properties
mxmlc -locale=fr_FR -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^
     bin-debug\bundles\mypals
What have I missed???

You have two posts. I will try to answer each completely. Second one first. You say I should change my build to include the framework resources. I am afraid I am not sure which and what to do there. We combine all our properties file into one large one, then use the following build line:
mxmlc -locale=fr_FR,en_US -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
I am assuming you are telling me to change the "-include-resource-bundles" line, but what to add? The "sdks\4.0.0\frameworks\locale\en_US" holds 13 swf files. I tried adding that entire folder (along with the fr_FR folder) to the project library path (in the project properties dialog), but that made no change. I also tried reverting the library path tab back to "MX Only" instead of "MX + Spark", but again no change.
====================
For your first message, I did a search for 'spark' in the entire project. It only existed on 3 lines, each at the start of css files:
    @namespace s "library://ns.adobe.com/flex/spark";
I had put those in based on reading needed changes to naming in CSS. Since I was not actually using any spark ('s') components yet, I removed these lines. The entire project now does not have the word 'spark' anywhere in it. No change in behavior (as I expected).
I did a search for "s:" throughout the project. That does exist in probably 100 places, but all are legitimate. Things like (xmlns:mx="http://www.adobe.com/2006/mxml") or variable names ("var matches:Object"). No reference to any s: object. (While on the topic, why does FlashBuilder still not have a "whole word" box to limit searches??).
Note that when I first reported this problem, the compiler was set to ONLY support fr_FR. In fighting this, I changed it to "en_US,fr_FR" hoping that would tell the compiler to load whatever en_US items it was looking for. We really do not want any English support in this version. (We do have another SWF created with only support for en_US, and another for en_UK, etc. Each language is a separate node on our server, so there is no need to mix & match at runtime)
The console shows a lot of swf loads that I do not understand...
The console output shows (my comments after ==> indicator)
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 2,229,992 bytes after decompression
             ==> our locale is set here, after the above load and before the next line
Look for name file at: ./data/fr_fr/names.csv
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 21,200 bytes after decompression
Loaded 2278 names.       ==> indicates successful load of data retrieved from server
Loaded 154 bad words     ==> our second data set has been retrieved and loaded
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 58,777 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 322,606 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\bundles\mypals\fr_fr_resources.swf - 595,025 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
    ==> not sure what this next warning means. I'm guessing I will later have to research it and return to 'secure' comm with server, but I'm ignoring for now
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
Resource bundle loaded for locale fr_fr ==> at this point, we appear to have our French assets loaded successfully
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 1,303,976 bytes after decompression
[Unload SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf ==> some runs see this, but others do not. I expect it is a timing issue of whether it is reached or not before the crash
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 794,898 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 194,635 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 261,589 bytes after decompression
==> everything looks fine up to here. This is then when the third call to installCompiledResourceBundles occurs
Error: Could not find compiled resource bundle 'components' for locale 'en_US'.
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.0.0\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:340]
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.0.0\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:269]
    at mx.core::FlexModuleFactory/installCompiledResourceBundles()
    at mx.core::FlexModuleFactory/docFrameHandler()
    at mx.core::FlexModuleFactory/docFrameListener()

Error on JDeveloper 9i compilation

Similar Messages

Maybe you are looking for