JDeveloper Line Compiler and Generics

Hello all. Well it's great to finally have a fully Java 6 compatible JDeveloper. I have run into a problem with
generics however. Consider the following code:
public class MyMessageFactory
public static <Type extends MyMessageType> Type getInstance()
Type rtnObj;
// some code
return rtnObj;
where MyMessageType is defined as an abstract class:
public abstract class MyMessageType
So far everything is good. When I refer to the above method in another class however, the line compiler complains that I am
equating to an incompatible type:
MyMessageImpl myMessageImpl = MyMessageFactory.getInstance();
When I use NetBeans or Eclipse I do not get this error. However the JDeveloper line compiler forces me to use a cast:
MyMessageImpl myMessageImpl = (MyMessageImpl)MyMessageFactory.getInstance();
Anyone have any ideas on what may be wrong here?

What is wrong is that there is a bug in Audit and also in the OJC compiler. Sorry about that. I filed bugs to have this fixed.
Please use the cast to avoid the bugs.
Keimpe Bronkhorst
JDev IDE team

Similar Messages

Line items AND GENERIC EXTRACTION

what does line items exactly mean in DATASOURCES
AND WHAT ARE DELTA TYPE EXTRACTIONS IN GENERIC
TIME STAMPING
CALENDAR DAY
NUMERICAL POINTER
COULD ANY PLEASE EXPLAIN THE DIFFERNCE AND IN WHAT SCENARIOS WE USE IT ...
LOOKING FOR YOUR REPLY

Hi Guru,
Check below doc & thread for Line Item Dimension:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
Line Item Dimenstion
If a field (date, progressive document number, timestamp) exists in the extract structure of a DataSource that contains values which increase monotonously over time, you can define delta capability for this DataSource. If such a delta-relevant field exists in the extract structure, such as a timestamp, the system determines the data volume transferred in the delta method by comparing the maximum value transferred with the last load with the amount of data that has since entered the system. Only the data that has newly arrived is transferred.
To get the delta, generic delta management translates the update mode into a selection criterion. The selection of the request is enhanced with an interval for the delta-relevant field. The lower limit of the interval is known from the previous extraction. The upper limit is taken from the current value, such as the timestamp or the time of extraction. You can use security intervals to ensure that all data is taken into consideration in the extractions (The purpose of a security interval is to make the system take into consideration records that appear during the extraction process but which remain unextracted -since they have yet to be saved- during the next extraction; you have the option of adding a security interval to the upper limit/lower limit of the interval).
After the data request was transferred to the extractor, and the data was extracted, the extractor then informs generic delta management that the pointer can be set to the upper limit of the previously returned interval.
To have a clear idea:
1. If delta field is Date (Record Create Date or change date), then use Upper Limit of 1 day.
This will load Delta in BW as of yesterday. Leave Lower limit blank.
2. If delta field is Time Stamp, then use Upper Limit of equal to 1800 Seconds (30 minutes).
This will load Delta in BW as of 30 minutes old. Leave Lower limit blank.
3. If delta field is a Numeric Pointer i.e. generated record # like in GLPCA table, then use
Lower Limit. Use count 10-100. Leave upper limit blank. If value 10 is used then last 10
records will be loaded again. If a record is created when load was running, those records
may get lost. To prevent this situation, lower limit can be used to backup the starting
sequence number. This may result in some records being processed more than once.
Refer this link from help.sap.com
http://help.sap.com/saphelp_erp2005/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
Difference between timestamp used in copa and generic data extraction?
COPA timestamps vs Generic timestamps
Check this doc for more info:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Hope these helps u...
Regards,
KK.

How to compile and run java files on a mac using command line?

can someone tell me or link me to some article on how to compile and run java files from command line on a mac? I have mac OS X leopard

What do you mean by "where to put them" ? What do you want to put anywhere ?
Have you read Peter's comment in brackets ? Perhaps you have a classpath problem ?
Edited by: Michael_Knight on Aug 31, 2008 4:23 AM

Compile and Run From Windows Cmd Line?

Hey,
I have a Java project that I've created and run successfully from within Eclipse IDE. Now, I'm trying to compile and run from the command line so I don't have to depend on Eclipse. I can't seem to get it to work. I get tons of classpath looking errors.
Is there a way to use Eclipse such that it will show you the correct synatx to run the project from the command line?
Can anyone help me with this?
My project structure is:
MyProject
------src
---------------File1.java
---------------File2.java (main class)
------lib
---------------someFile1.jar
---------------someFile2.jar

MyProject
------src
---------------File1.java
---------------File2.java (main class)
------lib
---------------someFile1.jar
---------------someFile2.jar
try:
c:\basedir> javac -classpath .;lib\someFile1.jar;lib\someFile2.jar src\*.java
c:\basedir> java -cp .;lib\someFile1.jar;lib\someFile2.jar src.File2

SWF and XML for Command line compiling for iOS

I need to compile an application for iOS using command line ADT. I need to pass the SWF and XML to the ADT command. But which ones do I need to pass as the ones available are in the debug folder and I don't think they are well optimized for mobile publishing. Also the XML has debug with id in it.

Hi,
Yes, Flash Builder, by default, doesn’t save release swfs. A simpler way to get them however be to go to Project->Properties->Flex Compiler and set
‘-debug=false’ in compiler arguments.
Now the swf generated in bin-debug will be a release swf.
Please let us know in case you face any issues.
Thanks,
Amish.

Compiling and installing Tux On Ice, need a little help

I have a desktop system and a netbook that I would like to have hibernating when they aren't being used. The wiki outlined roughly how to accomplish this with this page: https://wiki.archlinux.org/index.php/Tuxonice
I downloaded from the AUR the kernel26-ice 2.6.38-4 to compile and install. I managed to compile it (I think ... correctly I hope) but every time I try to get it installed with "mkinitcpio -p kernel26-ice.preset" the build fails with these errors:
[root@blackyunzi ~]# mkinitcpio -p kernel26-ice
/etc/mkinitcpio.d/kernel26-ice.preset: line 5: /etc/mkinitcpio.d/kernel26-ice.kver: No such file or directory
==> Building image from preset: 'default'
==> WARNING: No kernel version specified. Skipping image `default'
==> Building image from preset: 'fallback'
==> WARNING: No kernel version specified. Skipping image `fallback'
[root@blackyunzi ~]# cd ~heather/aur_builds/kernel26-ice/kernel26-ice/
I have tried to CD into the build directory just to make sure I was using the correct file but that has not helped. I've never compiled my own kernel before today and I'm stymied as to what I'm doing wrong. If it matters, I compiled it as a regular user in the folder where I downloaded it to. The contents of my build directory:
[heather@blackyunzi kernel26-ice]$ ls -al kernel26-ice
total 117308
drwxr-xr-x 2 heather heather 4096 Jul 27 19:52 .
drwxr-xr-x 3 heather heather 4096 Jul 27 19:08 ..
-rw-r--r-- 1 heather heather 236395 Apr 21 05:12 2.6.38.3-sched-bfs-401.patch
-rw-r--r-- 1 heather heather 125982 May 20 18:27 config
-rw-r--r-- 1 heather heather 120300 May 20 18:27 config.x86_64
-rw-r--r-- 1 heather heather 40977284 Jul 27 19:47 kernel26-ice-2.6.38-4-x86_64.pkg.tar.xz
-rw-r--r-- 1 heather heather 665 Jul 27 19:45 kernel26-ice.install
-rw-r--r-- 1 heather heather 3111082 Jul 27 20:01 kernel26-ice.preset
-rw-r--r-- 1 heather heather 74739098 Mar 14 19:40 linux-2.6.38.tar.bz2
-rw-r--r-- 1 heather heather 186457 Jun 2 19:36 patch-2.6.38.8.bz2
-rw-r--r-- 1 heather heather 12794 Jun 7 02:14 PKGBUILD
-rw-r--r-- 1 heather heather 451933 Apr 3 15:36 reiser4-for-2.6.38.patch.bz2
-rw-r--r-- 1 heather heather 129795 May 4 18:30 tuxonice-3.2-for-2.6.38.patch.bz2
[heather@blackyunzi kernel26-ice]$
The makepkg file shows that I only changed one setting, the "-j4" bit:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/curl
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Exclusive: will only run on x86_64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
#-- Make Flags: change this for DistCC/SMP systems
## While using the kernel26-ice build CK recommends you ONLY compile this kernel
## with the same number as how many cpu's you have.
## quoting his example: IE you should ONLY do make -j4 on quad core, -j2 on dual core and so on.
MAKEFLAGS="-j4"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
BUILDENV=(fakeroot !distcc color !ccache check)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
OPTIONS=(strip docs libtool emptydirs zipman purge)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Mkinitcpio shows, after stripping out the comments:
MODULES=""
FILES=""
HOOKS="base udev autodetect usbinput pata scsi sata lvm2 filesystems consolefont"
(no compression options)
Finally, I put the kern26-ice.preset into the /etc/mkinitcpio folder and tried to install it from there but again I met failure.
Apologies for the length but I'm getting frustrated with this issue.
Last edited by MoonSwan (2011-07-28 02:40:58)

MoonSwan wrote:I have a desktop system and a netbook that I would like to have hibernating when they aren't being used. The wiki outlined roughly how to accomplish this with this page: https://wiki.archlinux.org/index.php/Tuxonice
I downloaded from the AUR the kernel26-ice 2.6.38-4 to compile and install.
Hm... netbook.
If you don't mind trying bfs and bfq too, then you could give the pf-kernel that is mentioned in the wiki too a try:
http://aur.archlinux.org/packages.php?ID=50956
It has a repository here:
[pfkernel]
Server = http://dl.dropbox.com/u/11734958/$arch
and a thread: https://bbs.archlinux.org/viewtopic.php?id=103462
I'm not quite sure how netbook performance is affected by BFS...
It has the bonus to already be based on 3.0.
Last edited by Cdh (2011-07-28 20:35:50)

Compiling and putting java classes in database schema

hi..good evening to all...
I have total 7 java classes which i have to compile and put in the database schema. those 7 classes are interdependent on each other thats why there is a particular order of execution.
i want to compile and put them in the schema thorugh the command line.
i have tried doing this one by one by executing the following command in cmd...
D:\>loadjava -u username/password@sid -v -resolve javaclassname.java
then its working fine..
But i have to do this in one time i.e i have to compile and put all the 7 classes in schema by a single command.
Thats why i have put all the 7 classes one by one in the required order...save the file as 'java_sources.java' and then run the following command...
D:\>loadjava -u username/password@sid -v -resolve java_sources.java
but it is not working... :(
please help...thanks in advance

Hi,
It is not required to load one by one class files into the schema. Can create a jar file for all the class files and load the jar file using the '-o' option in loadjava
eg:
loadjava -u username/password@sid -v -r -o jar_file_name.jarI hope you might use any IDE to develop the java class files. All the IDE have option to develop jar file if not get oracle JDeveloper for easy option.
Check the version of jdk used in your oracle server and use appropiate version of Jdeveloepr and compile the classes.
If your class files use any builtin library jar files those also need to be loaded.
As thomaso said if pasted with errors can resovle easier
NB:
http://download.oracle.com/docs/cd/B10500_01/java.920/a96659/02_load.htm

JDeveloper 9i RC and JDK 1.4?

Sorry if this is an FAQ, but I haven't found it anywhere...
The RC download of Oracle9i JDeveloper does not appear to support JDK 1.4 properly. I can set up the JDK classpaths for compilation, and the JDK Java executable for running, however JDeveloper still uses its own compiler "ocj".
ocj does not appear to support the new 1.4 language features, particularly "assert". The ocj command-line help tells me there is a "-target 1.4" option, but this doesn't appear to do anything!
Even if it did, I'm not sure where I can put this option within the Project Properties to get compiles within the IDE (as opposed to command-line) to use it.
Can anyone help with this?
Thanks,
Ellis.

Hi,
The Oracle9i JDeveloper production ojc compiler will support the 1.4 assert keyword.
Thanks,
Brian
JDeveloper Team

Command line compiler (rhcl.exe) adds on rogue full pathways into [Merge Files] of .hhp

I'm using RH 9 and generating chm outputs on my Win 7 64-bit computer.
I have a core chm help file and several sub chm helps that get merged into it.
I have a batch file that regularly compiles our help files locally and then copies them into a common local directory. It then copies them up to a mapped network drive where they are picked up by the nightly build of our installer.
The problem I have, is that the command line compiler (rhcl.exe) is adding on a full pathway for all the sub helps listed in the [Merge Files] section of the core help's .hhp file, causing these problems:
1) First of all, the pathways are wrong. The pathway it puts on is from the location of my .xpj file of my core help project. The output directory for the compiler is actually sending all the helps to a different local directory.
2) These need to be relative, and should not have full pathways. The full pathways make it so that when I click on a subhelp TOC entry that subhelp's topic opens up in an entirely different window instead of merged into the core help's window. (See #13 on Peter's helpful site here about the problem with absolute paths: http://www.grainge.org/pages/authoring/rh9/using_rh9.htm)
Here' what I want it to look like (the good):
[MERGE FILES]
pcdmisportable.chm
pcdmistutor.chm
pcdmisvision.chm
pcdmislaser.chm
pcdmiscmm.chm
pcdmisUJB.chm
pcdbasic.chm
toolkitmodulesvwmp.chm
pcdmisdci.chm
toolkitmodules.chm
pcdmisnc.chm
pcdmisip.chm
toolkitmodulesblade.chm
pcdmisregistry.chm
pcdmisfixturing.chm
Here's what it looked like after the command line compile (the bad and the ugly):
[MERGE FILES]
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisportable.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmistutor.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisvision.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmislaser.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmiscmm.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisUJB.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdbasic.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\toolkitmodulesvwmp.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisdci.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\toolkitmodules.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisnc.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisip.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\toolkitmodulesblade.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisregistry.chm
d:\hg\pcdmisqa\pcdlrn\help\corehelp\pcdmisfixturing.chm
I've done the following ....
I've checked my .xpj file and they have relative paths only.
I've deleted my .cpd file.
I've removed chm references from my rhbag.apj.
... and the hhp file still gets modified with pathways to my core project
directory tacked on:
It's strange; because if I compile without the command line, by opening the project and running the generation inside of RH, I don't get the problem where it re-writes the [Merge Files] section with the pathnames.
Any ideas on where are these rogue full pathways coming from and how I can fix it? Or is it just a bug with the command line version of the compiler that Adobe will need to fix?

I don't use command line generation but to the best of my knowledge, this has not been fixed.
Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Is there anyone at all here who has successfully compiled and deployed an SSRS custom report item in VS2012?

Is there anyone at all here who has successfully compiled and deployed an SSRS custom report item in VS2012? Is there a demo out there that actually works in VS2012? Is there anyone who has actually been able to compile and deploy that
apparently obsolete Polygons demo? (Pardon my impatience but I'm running a bit short of time here.)
After much hacking and googling I was able to get Polygons to compile but I still can't deploy it to the toolbox. ('The custom report item type PolygonsDesigner is not installed'). I've modified the RSReportDesigner.config
as instructed but I have no rssrvpolicy.config file on my local machine and
as yet I have no idea if that is necessary for local development.
In order to get it to compile I first added the reference C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\PrivateAssemblies\Microsoft.ReportingServices.ProcessingCore.dll to both projects.
To the PolygonsDesigner Project I also added the references:
C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\PrivateAssemblies\Microsoft.ReportDesigner.Controls.dll
C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\PrivateAssemblies\Microsoft.ReportingServices.Designer.11.0.dll
C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\Microsoft.ReportingServices.Interfaces.dll
Are these the correct references?
Exactly what software do you need installed on your local machine in addition to VS2012 in order to create a custom control?
(Designer.11.0 was added per the instructions in reference: https://connect.microsoft.com/VisualStudio/feedback/details/783391/unable-to-integrate-previously-working-ssrs-custom-report-item-to-vs-2012s-toolbox
After that I added the alias RSDesigner to it's properties and extern alias RSDesigner; at the top of the PolygonsDesigner.cs file. )
As of now, the top of the PolygonsDesigner.cs is as follows. I don't recall making any other changes to the code. As far as I can remember this is all I did in order to be able to compile the code in VS2012.
extern alias RSDesigner;
using System;
using System.ComponentModel;
using System.ComponentModel.Design;
using System.Collections;
using System.Collections.Generic;
using System.Diagnostics;
using System.Drawing;
using System.Windows.Forms;
using Microsoft.ReportDesigner;
using Microsoft.ReportDesigner.Design;
using Microsoft.ReportingServices.Interfaces;
using Microsoft.ReportingServices.RdlObjectModel;
using System.Xml;
using System.Xml.Xsl;
using System.Xml.XPath;
[LocalizedName("Polygons")]
[Editor(typeof(CustomEditor), typeof(ComponentEditor))]
[ToolboxBitmap(typeof(PolygonsDesigner), "Polygons.ico")]
[CustomReportItem("Polygons")]
[ToolboxItem(typeof(RSDesigner::Microsoft.ReportDesigner.Shell.CRIToolboxItem))]
[System.CLSCompliant(false)]
public class PolygonsDesigner : CustomReportItemDesigner
{ etc...

Just fixed this myself.
It appears the documentation online is wrong and the sample code is missing a reference to a reporting services dll and an attribute.
What you need to do to get it working in VS2012 is add a reference to: Microsoft.ReportingServices.designer.11.0.dll to the PolygonsDesigner project and then add the following attribute to the PolygonsDesigner class: [ToolboxItem(typeof(Microsoft.ReportDesigner.Shell.CRIToolboxItem))]
I also removed the [System.CLSCompliant(false)] attribute.
You then recompile and place both dlls in C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\PrivateAssemblies directory and the PolygonsDesigner.dll into the C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
or what ever is you reporting services path.
You also need to change the Microsoft example for the rereportserver.config file to:
    <ReportItemDesigner>
   <ReportItem Name="Polygons" Type="Microsoft.Samples.ReportingServices.PolygonsDesigner, PolygonsDesigner" />
    </ReportItemDesigner>
    <ReportItems>
   <ReportItem Name="Polygons" Type="Microsoft.Samples.ReportingServices.PolygonsCRI,PolygonsCRI"/>
    </ReportItems>
Notice that I changed the namespaces and class to what is in the actual code so if you change it make sure you change it here.
And here in the RSReportDesigner.config:
<ReportItems>
      <ReportItem Name="Polygons" Type="Microsoft.Samples.ReportingServices.PolygonsCustomReportItem,PolygonsCRI" />
    </ReportItems>
    <ReportItemDesigner>
      <ReportItem Name="Polygons" Type="Microsoft.Samples.ReportingServices.PolygonsDesigner, PolygonsDesigner" />
    </ReportItemDesigner>
    <ReportItemConverter>
      <Converter Source="Chart" Target="Polygons" Type="PolygonsCRI.PolygonsConverter, PolygonsDesigner" />
    </ReportItemConverter>
Notice I haven't changed the last part as I didn't know what the PolygonsCRI.PolygonsConverter was.
And make sure the rssrvpolicy.config looks like this:
     <CodeGroup class="UnionCodeGroup" version="1" PermissionSetName="FullTrust" Description="This code group grants PolygonsCRI.dll FullTrust permission. ">
       <IMembershipCondition class="UrlMembershipCondition" version="1" Url="C:\Program Files\Microsoft SQL Server\MSRS10_50.SQLSERVER\Reporting Services\ReportServer\bin\PolygonsCRI.dll" />
    </CodeGroup>
After a restart of ssrs and relaunch of VS2012 I opened a test project and added the PolygonsDesigner.dll to the toolbox and it works.
Jamie

How to Compile and run Smart Card Application

hi
any one can help me reagrding Javacard API. i download the JavaCard Development Kit from sun and install on my machine but i didn't get all java files and class files of JavaCard API. where i obtain those files so my application get compile and run.
pls help me i m new in this technology.
Thanks in Advance.

My program Test.java in F:\Tomcat5\webapps\Ambika\WEB-INF\Classes. I compiled in the format below. I got like this. What should I do for this? But yesterday I compiled like this only, It compiled and the folder com\cert\Test.class is created. Today again I compiled the pgm after deleting the already created folder 'com\cert', I got the error like this.
I've given my pgm and the thing I've got when I compiled it.
Test.java
package com.cert;
public class Test
public void display()
System.out.println("Hai");
F:\Tomcat5\webapps\Ambika\WEB-INF\Classes>javac -d F:\Tomcat5\webapps\Ambika\WEB-INF\Classes\Test.java
javac: no source files
Usage: javac <options> <source files>
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are u
sed
-classpath <path> Specify where to find user class files
-cp <path> Specify where to find user class files
-sourcepath <path> Specify where to find input source files
-bootclasspath <path> Override location of bootstrap class files
-extdirs <dirs> Override location of installed extensions
-endorseddirs <dirs> Override location of endorsed standards path
-d <directory> Specify where to place generated class files
-encoding <encoding> Specify character encoding used by source files
-source <release> Provide source compatibility with specified release
-target <release> Generate class files for specific VM version
-version Version information
-help Print a synopsis of standard options
-X Print a synopsis of nonstandard options
-J<flag> Pass <flag> directly to the runtime system
F:\Tomcat5\webapps\Ambika\WEB-INF\Classes>
Plz help me.
thanks in advance
Ambika

How to compile and run package programs in Java

Hi,
I want to know how to compile and run the package programs in Java using -d. instead of creating the package folder manually.
eg:
package Test;
class test1
public void disp()
//Any code;
I want to compile this without creating the folder ' Test ' manually. that is if we use -d with javac the Test folder will be created automatically. I need the format of -d
could anyone please help me.
Thanks in Advance ,
Ambika

My program Test.java in F:\Tomcat5\webapps\Ambika\WEB-INF\Classes. I compiled in the format below. I got like this. What should I do for this? But yesterday I compiled like this only, It compiled and the folder com\cert\Test.class is created. Today again I compiled the pgm after deleting the already created folder 'com\cert', I got the error like this.
I've given my pgm and the thing I've got when I compiled it.
Test.java
package com.cert;
public class Test
public void display()
System.out.println("Hai");
F:\Tomcat5\webapps\Ambika\WEB-INF\Classes>javac -d F:\Tomcat5\webapps\Ambika\WEB-INF\Classes\Test.java
javac: no source files
Usage: javac <options> <source files>
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are u
sed
-classpath <path> Specify where to find user class files
-cp <path> Specify where to find user class files
-sourcepath <path> Specify where to find input source files
-bootclasspath <path> Override location of bootstrap class files
-extdirs <dirs> Override location of installed extensions
-endorseddirs <dirs> Override location of endorsed standards path
-d <directory> Specify where to place generated class files
-encoding <encoding> Specify character encoding used by source files
-source <release> Provide source compatibility with specified release
-target <release> Generate class files for specific VM version
-version Version information
-help Print a synopsis of standard options
-X Print a synopsis of nonstandard options
-J<flag> Pass <flag> directly to the runtime system
F:\Tomcat5\webapps\Ambika\WEB-INF\Classes>
Plz help me.
thanks in advance
Ambika

Warning message from Jdeveloper on Compilation

Hi all,
I am a new bie to JDeveloper and ADF. While deploying my sample application, "_Warning: JSP is not within the HTML Root directory, nor is it a tag file from a distributed tag library. It will not be compiled_." is shown for all the jspx pages created. Does it shows a bad folder structure interms of best pratices followed. please suggest.
Thanks
jzwl

Please mentions your jdev version?
What kind of application and which technologies do you use.
The error message tells you that jsp files are found which are not in the html_root folder or a subdirectory from the html_root. Those files won't be compiled and are not reachable from the browser when the app is running.
To solve this you should move all jsp files in the html_root or a subdirectory from html_root.
Timo

LIS and Generic Extraction

Hi All,
Could someone please send me some information regarding LIS extraction and Generic extraction.
Thanks in advance,
Sekhar

Hi Sekhar,
Please do check the link for step by step for generic xtraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
How to do basic LO extraction for SAP-R3-BW
1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
4. Go to transaction RSA3 and check the data.
5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
9.Now you can go to your data target and see the delta record.
find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
replicate data sources in BW:
RSA1 -> source systems -> right click on your source system -> replicate
then activate your BC:
service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
and execute infopackage (it should be delivered with BC)
Useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
service.sap.com/bi -> BI InfoIndex
sdn.sap.com -> Business Information Warehouse -> How-To guides (under Quick Links)
Hope This Helps.
****Assign Points If Helpful****
Regards,
Ravikanth

JPA and Generics

Hi,
please consider the following code snippet:
@Entity
@Table(name = "MS")
@DiscriminatorColumn (name="TYPE",discriminatorType=DiscriminatorType.INTEGER)
public abstract class MS<T extends M> implements java.io.Serializable {
    @JoinColumn(name = "M_ID", referencedColumnName = "ID")
    @ManyToOne(fetch=FetchType.LAZY)
    private T m;
@Entity
@DiscriminatorValue("0")
public class BS extends MS<B> implements java.io.Serializable {
@Entity
@Table (name="M")
@DiscriminatorColumn (name="TYPE",discriminatorType=DiscriminatorType.INTEGER)
public abstract class M<T extends MS> implements java.io.Serializable {
    @OneToMany(mappedBy="m")
    private Set<T> ms = new HashSet<T>();
@Entity
@DiscriminatorValue("0")
public class B extends M<BS> implements java.io.Serializable {
}This compiles and deploys fine. However, at runtime JPA is not able
to figure out what m in the mappedBy attribute refers to.
It complains that it has a set of type BS which does not have the field m defined. This is true for BS
but its super class MS has this field defined.
So I wondering if this is a limitation of JPA or may be I configured something
wrong!? Is a scenario like above possible with the current JPA?
Thanks for any help.
regards.

No idea!? Let me give an example using Hibernate (you could replace it with JPA though):
B b = session.get(B.class, Long.valueOf(1));
Hibernate.initialize(b);In the initialize() process you get an exception, complaining that the Set cannot be resolved because the property m does not exist in class B (which is the type at runtime).
So I am wondering if it is currently possible to use generics in this way with JPA/Hibernate Entity Manager?

JDeveloper Line Compiler and Generics

Similar Messages

Maybe you are looking for