Error on multiple condition

Hello all
I'm having trouble with a multiple condition. I have 4 possible outputs, but in one of them the workflow is terminated, and there is no any instruction set to do this. Any ideas on what is going on?.
Regards IA

Please analyse the Workflow Log and also the Workflow design from PFTC_DIS.
Following reason can result into this
1)Use of Process Control step which is not displayed in |Wflow log
2) Use of wait for event step in a fork as well as triggering of the event
3) Triggering event that is a terminating event of the task placed in 1 branch of the condition step.
Thanks
Arghadip

Similar Messages

Error in multiple condition type switch

Hi,
I define a multiple condition as a switch for different processing branches for my
Workflow (all my attributes in the conditions are from the object).
I defined the Other Values outcome also.
When one of the conditions is true I received an error SWP103 "Error when starting a SWITCH branch"
It works fine when my process go to "other" outcome.
Thanks in Advance,
Ronit.

In my workflow the same error occured while using a mutliple condition with type Switch.
A short explanation of my workflow:
- container operation: errorcounter = errorcounter + 1
- multiple condition
1. errorcounter =< 4
2. errorcounter = 5
3. other values
- activity
- loop until (depending on outcome activity).
The first time while executing the loop went perfect, but the second time it failed and based on the message I guess it failed on the multiple condition. What I also notices in the technical view was that the errorcounter wasn't updated.
I guess the container operation and multiple condition bumped into eachother (somehow?) and caused the error.
My solution:
Put a wait stap between step 1 and 2 and it works fine.
I'm not sure this case is applicable to you, but may be a hint in the right direction. Good luck!

Multiple condition : Error when starting a SWITCH branch

Hi,
In our Z Leave Workflow,I am facing the errors listed below.
Error when starting a SWITCH branch
Error during CASE evaluation in SWITCH mode for node 0000000158
Operator 'EQ': The value of the left operand cannot be determined
Error in the evaluation of expression '<???>&REQ.STATUS&' for item '1'
Unable to determine the value of component ''
It gives error in Multiple condition Request Approved? which is similar to standard WF12300111 node number 158 (u can say copy of WF12300111
This multiple condition works in some scenario But it gives dump at other scenario .
I have checked the value of REQ.STATUS in runtime. It populates the value as 'POSTED' in runtime,
Please suggest if any solution on this.
Regards,
Kalpesh

Hi There was some problem with task which was comprising class CL_PT_REQ_WF_ATTRIBS and APPROVE method. This method is to change the status of particular leave workitem.After running this particular task ,the status was not changin instantly.This method locks particular workitem and was releasing the workitem once the WF gets completed.Hence I was getting REQ.STATUS as sent.
I have changed that task with following code in new task...
DATA:
      REQUEST_ID TYPE PTARQ_DEDUCTION-REQUEST_ID,
request      TYPE REF TO if_pt_req_request,
    new_status   TYPE tim_req_status.
SWC_GET_ELEMENT CONTAINER 'REQUEST_ID' REQUEST_ID.
CALL FUNCTION 'ENQUEUE_EPTREQ'
    EXPORTING
      mode_ptreq_header = 'E'
      request_id        = request_id
    EXCEPTIONS
      foreign_lock      = 1
      system_failure    = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
    MESSAGE w058(hrtim_abs_req) WITH request_id.
ELSE.
CALL METHOD ca_pt_req_header=>agent->get_request
      EXPORTING
        im_request_id = request_id
      IMPORTING
        ex_request    = request.
execute state transition
    CALL METHOD request->initiate_state_transition
      EXPORTING
        im_transfer_event = 'APPROVE'
      IMPORTING
        ex_new_status     = new_status.
COMMIT WORK.
    CALL FUNCTION 'DEQUEUE_EPTREQ'
      EXPORTING
        request_id = request_id.
ENDIF.
This will create new status for leave item during WF processing.
Apart from that also added Wait for 2 minutes after that task....
Thanks for your help.
Regards,
Kalpesh

Error in multiple switch condition

Dear All,
In my workflow i have a multiple condition step in which i am using SWITCH which on execution gives the following error :
1.Work item 000000004008: Object FLOWITEM method EXECUTE cannot be executed
->Error when starting a SWITCH branch.
This switch has 3 conditions: based on the parameter &decision&.
At this i am checking there is a value in the workflow container for the decision,still gives this error.
Please tell any possible resons for this.

I am using the RFC to trigger and after the approval step
i am passing the value of the decision into the container.
Now tell me where do i pass the workitem_id??
What RFC you are using to trigger the approval step
See all I want to say is for every BO you ll have a key attribute through which it will instantiate the BO so for FLOWITEM BO workitem id is the key attribute
and
For e;g
in the FM
SWE_EVENT_CREATE
EXPORTING
Business Object name = 'FLOWITEM'.
Business Object Key = '16033'.

Deleting data from another table with multiple conditions

Hi frnds
I need to delete some data from a table based on multiple condition I tried following sql but its deleteing some rows which is not meeting the criteria which is really dangerours. When i trying = operator it returns ORa- 01427 single -row subquery returns more than one row
delete from GL_TXNS
where TRN_DT in (Select trn_Dt from GL_MAT)
and BR in (select ac_branch from GL_MAT)
and CODE in (select CODE T from GL_MAT)
and (lcy_amt in (select lcy_amt from GL_MAT) or
fcy_amt in(select fcy_amt from GL_MAT)
rgds
ramya

My answer is the same as Avinash's but I will explain a little bit more.
ORa- 01427 single -row subquery returns more than one rowmeans that you have a subquery that Oracle is expecting one value from that is returning multiple values. In your case you need one value for the equijoin ("=") and you are getting more than one value back. The error happens even if all the values are the same - multiple values being returned will cause the error.
The solution is to either allow multiple values to be returned (say, use the IN condition istead of "=") or only return one value if possible (say, forcing one value by using DISTINCT, GROUP BY, or a WHERE clause condition of ROWNUM=1) - but these workarounds must be checked carefully to make sure they work correctkly

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

Multiple conditions in a filter of Bursting control file

Hi All,
I am trying to use multiple conditions in a filter of Bursting control file and it throws me an error.
Can you please correct me on this.
<xapi:template type="rtf" location="xdo://AR.XXRAXINVOPCO.en.00?getSource=true" filter=".//G_INVOICE[BILL_CUST_NAME='ABC COMPANY'] and .//G_INVOICE[BILL_CUST_NAME='ABC COMPANY']">
Thanks,
--John.

I have made little progress and now I am able to connect to the printer but its not printing.It prints a blank paper saying this printer is not setup for direct PDF printing.Can anyone help?
[073112_025517889][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] initConfig(): loading default properties :{TEMP_DIR:String=/usr/tmp, BUFFERING_MODE:Boolean=true}
[073112_025517890][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): called with request type :ipp_printer
[073112_025517890][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): exiting
[073112_025517890][][STATEMENT] status message:
[073112_025517890][][STATEMENT] xdo.bursting.IPP_RESPONSE_CHECK_INTERVAL=null
[073112_025517890][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Called
[073112_025517890][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] setDefaultServerProperties(): Default properties of server 'xslcisd2' are loaded. {URI:String=ipp://xslcisd2.southernco.com/ipp, server-type=ipp_printer}
[073112_025517891][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] setDefaultServerProperties(): properties defined in this request.
[TEMP_DIR:String] [usr/tmp/073112_025446100]
[server-type] [ipp_printer]
[ASYNC_CHECK_INTERVAL:Integer] [60000]
[SERVER_NAME:String] [xslcisd2]
[IPP_ATTRIBUTE_CHARSET:String] [utf-8]
[IPP_DOCUMENT_FORMAT:String] [application/octet-stream]
[BUFFERING_MODE:Boolean] [true]
[IPP_USE_CHUNKED_BODY:String] [true]
[URI:String] [ipp://xslcisd2.southernco.com/ipp]
[IPP_HTTP_RESPONSE_CHECK_INTERVAL:Integer] [0]
[TEMP_FILE_PREFIX:String] [dlvr]
[IPP_COPIES:Integer] [1]
[RETRY:Integer] [0]
[RETRY_INTERVAL:Integer] [60000]
[TEMP_FILE_SUFFIX:String] [.tmp]
[IPP_USE_FULL_URL:String] [false]
[ASYNC_TIMEOUT:Integer] [86400000]
[IPP_NATURAL_LANGUAGE:String] [en]
[073112_025517891][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): BUFFERING_MODE is ON.
[073112_025517891][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): TEMP_DIR found, start document buffering : /usr/tmp/073112_025446100
[073112_025517891][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] backupDocument(): Starting document buffering.
[073112_025517893][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] backupDocument(): Creating temporary file for buffering : /usr/tmp/073112_025446100/dlvr67s66bXmwi8695010679275918372.tmp
[073112_025517894][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] backupDocument(): 69429 bytes have been written to the temporary file.
[073112_025517894][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] filterDocument(): Starting document preprocessing.
[073112_025517894][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] filterDocument(): No native command found for preprocessing, exiting.
[073112_025517895][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] backupDocument(): Finished document buffering.
[073112_025517903][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Start reading the buffered document file. : /usr/tmp/073112_025446100/dlvr67s66bXmwi8695010679275918372.tmp
[073112_025517903][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Calling DeliveryRequestHandler.submitRequest()
[073112_025517903][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Called
[073112_025517903][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Opening HTTP URL: http://xslcisd2.southernco.com/ipp
[073112_025517904][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): IPP request dump:
IPP version: 10
operation id: 02
charset: utf-8
request id: 3
-- operation attrs --
[1]attributes-charset:utf-8
[1]attributes-natural-language:en
[1]printer-uri:ipp://xslcisd2.southernco.com/ipp
[1]document-format:application/octet-stream
-- printer attrs --
-- job attrs --
[1]copies:1
[073112_025517904][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): HTTP chunked mode : true
[073112_025517904][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): IPP request header length : 181
[073112_025517905][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Opening HTTP client.
[073112_025517905][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] openRequest(request) called
[073112_025517905][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] openConnection() called - opening xslcisd2.southernco.com:80
[073112_025517905][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] openConnection(): Start non-SSL connection.
[073112_025517908][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] generateRequestHeader() called.
[073112_025517908][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] generateRequestHeader(): generated request header
POST /ipp HTTP/1.1Host: xslcisd2.southernco.com
User-Agent: Oracle XML Publisher 5.6.3
Connection: Keep-Alive
Transfer-Encoding: chunked
Content-Type: application/ipp
<<<
[073112_025517909][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] openRequest(): using ChunkedOutputStream.
[073112_025517909][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Writing the document to the server stream.
[073112_025518090][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): 69429 bytes have sent to the server.
[073112_025518090][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] submitRequest() called
[073112_025518122][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] submitRequest(): pIn.available(): 445
[073112_025518122][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] Constructor called
[073112_025518122][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] parseResponse() called
[073112_025518122][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] pIn.available(): 445
[073112_025518123][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [HTTP/1.1 200 OK]
[073112_025518123][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] parseResponse() 1st line of response header: [HTTP/1.1 200 OK]
[073112_025518124][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Content-Type: application/ipp]
[073112_025518124][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [content-type][application/ipp]
[073112_025518125][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Cache-Control: no-cache, no-store, must-revalidate]
[073112_025518125][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [cache-control][no-cache, no-store, must-revalidate]
[073112_025518126][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Expires: THU, 26 OCT 1995 00:00:00 GMT]
[073112_025518126][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [expires][THU, 26 OCT 1995 00:00:00 GMT]
[073112_025518127][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Content-Length: 242]
[073112_025518127][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [content-length][242]
[073112_025518128][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : [Server: Allegro-Software-RomPager/4.34]
[073112_025518128][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] addResponseHeader(): [server][Allegro-Software-RomPager/4.34]
[073112_025518128][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] readLine() : []
[073112_025518128][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] parseResponse(): end of HTTP header
[073112_025518133][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] parseResponse(): HTTP response body ascii dump
0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x03 0x01 G 0x00 0x12 attributes-charset 0x00 0x05 utf-8H 0x00 0x1b attributes-natural-la
nguage 0x00 0x05 en-us 0x05 ! 0x00 0x06 copies 0x00 0x04 0x00 0x00 0x00 0x01 0x02 E 0x00 0x07 job-uri 0x00 ,http://xslcisd2.so
uthernco.com/ipp/IPP_Job_8! 0x00 0x06 job-id 0x00 0x04 0x00 0x00 0x00 0x08 # 0x00 0x09 job-state 0x00 0x04 0x00 0x00 0x00 0x03 D
0x00 0x11 job-state-reasons 0x00 0x04 none! 0x00 0x1a number-of-intervening-jobs 0x00 0x04 0x00 0x00 0x00 0x04
0x03 <<<
[073112_025518133][oracle.apps.xdo.delivery.http.HTTPResponse][STATEMENT] Exiting Constructor
[073112_025518133][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] closeConnection() called
[073112_025518133][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] closeConnection() exiting
[073112_025518133][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Closing HTTP client.
[073112_025518134][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): IPP response dump:
IPP version: 10
operation id: 01
charset: utf-8
request id: 3
-- operation attrs --
[1]attributes-charset:utf-8
[1]attributes-natural-language:en-us
-- printer attrs --
-- job attrs --
[1]job-uri:http://xslcisd2.southernco.com/ipp/IPP_Job_8
[1]job-id:8
[1]job-state:3
[1]job-state-reasons:none
[1]number-of-intervening-jobs:4
[073112_025518134][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequestHandler][STATEMENT] submitRequest(): Exiting submitRequest()
[073112_025518134][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] closeConnection() called
[073112_025518135][oracle.apps.xdo.delivery.http.HTTPClient][STATEMENT] closeConnection() exiting
[073112_025518135][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Finished calling DeliveryRequestHandler.submitRequest()
[073112_025518135][oracle.apps.xdo.delivery.ipp.IPPDeliveryRequest][STATEMENT] submit(): Process done successfully. Exiting submit()
Thanks,
--John.

Multiple conditions while taking export

hi,
when i'm trying to take export using multiple condition,
< EXP query='where branch_code=0130 and loan_date> 01-jan-2005' file=d:\yyy tables=xxxxx>
I get an error 'failed to process parameters'
can anybody help me to solve this
Regards

hi satish
this is the exact query
EXP query='where branch_code=0130 and loan_date> 01-jan-2005' file=d:\yyy tables=xxxxx userid=zz/xxx@test
server and client -9i

APEX Interactive Report Compute Case with multiple conditions to highlight

My ultimate is to highligt a row in an interactive report based on two conditions. I didn't see a way to use the highligt feature with two conditions. So I thought I would try to create a computation based on the two conditions. Then use that result for the highligting. Though I don't seem to be a be able to use multiple conditions in my computation Case statement. Is there a different syntax?
Here is what I have:
Case
When C = 'Open' and I > 15 Then 'True'
Else 'False'
End The error I get is: Invalid computation expression. and
Application Express 4.0.2.00.07
Thanks!
Edited by: cjmartin on Jan 10, 2012 10:57 AM

I'm surprised no one responded to this. What I did to resolve this issue was create a nested case statement. I don't think this was a good solution, but I can't find anyone else giving input. I know I can create another computational column in the select statement for the report, but the 'Interactive Report' part is where this should be. I want my clients to calculate what they want. Kind of hard when you can not use an 'and' for a range criteria.

Error in start conditions

Hi experts,
I Get an error in my application monitors,
we dont have any clue who is the user and why is he facing such error.
Can any one help me out in this regard.
The error is
Start conditions for 00050101442 is incorrect : 0 workflows
This is SRM version 4.0
Best Regards,
Sairam.

Hi Sai
Check your workflow start conditions for this object in txn SWB_PROCUREMENT.
If you have multiple workflows activated for any object (say, SHopping cart), then you need to be careful to see that :
- start conditions are mutually exclusive (same start condition value should not be in 2 workflow startconditions. For example, you cannot define total value 0-1000 EUR for one workflow and 1000-10000 in another workflow as 1000 is valid in both )
- Start conditions encompass all possible values (For example, if you define total value 0-1000 EUR for one workflow and 1000-10000 in another workflow, it is not sufficient as they do not cover all values . Better would be to define 0-1000 in one workflow and >1000 in another workflow)
Best regards
Ramki

Multiple condition does not work

Hi,
I took a copy of the standard Leave request workflow (WS12300111) to a new workflow (WS90000002).
The class that was used in this workflow (CL_PT_REQ_WF_ATTRIBS) was also replaced with a copy (ZHR_CL_PT_REQ_WF_ATTRIBS).
The workflow is used for the approval of leave requests.
Now in the workflow there is a multiple condition which verifies whether the request was approved, rejected or withdrawn (this was also there in the standard).
The condition contains the rules:
Approved &REQ.STATUS& = POSTED or &REQ.STATUS& = APPROVED or &REQ.STATUS& = ERROR
Withdrawn &REQ.STATUS& = WITHDRAWN
Other values Rejected
--> REQ is an object of the class mentioned above. The rules were created in the normal way by clicking on the object in the container.
The workflow always stops at this condition, because it can not define the value of REQ.
If I check the container in the workflow report, the field REQ and its STATUS are correctly filled.
What could be wrong here?
Thanks,
Wim

Hi,
I solved it...
Just had to add a commit work to the task that is executing the status change of the request.
Kr,
Wim

Expression ... Handling multiple conditions

I am new in the MDM area and I have to write the expression to handle the following scenario
If country = US and Department code = ABC then either First name or Last name must be present. other wise error it out.
I have difficulty in handling multiple conditions.
Full points will be rewarded.

Hi Mike,
Case1: Both Country and Departmentcode are Lookup tables
IF (Country AND Departmentcode , IS_NOT_NULL(FirstName) OR IS_NOT_NULL(LastName) , FALSE )
Within expression select Lookups -> Country. Countries list will be displayed and you can select any value from the list. Same for Departmentcode
Case2: Country is lookup and Departmentcode is text field
IF (Country AND Departmentcode='ABC' , IS_NOT_NULL(FirstName) OR IS_NOT_NULL(Lastname) , FALSE )
Regards,
Jitesh Talreja

Error in updating condition table 372

Hello,
While saving Excise Invoice I am facing error 'Error in updating condition table 372'.Could you please solve this probelm?
Thanks in Advance

Dear All,
I done this--by doing some configuration changes.
Normally while doing Exports we are tempted to use the same sales area and accordingly we may give the combination of excise grp+series grp+export type in IMG>>>Logistics General>>>India>>>Business transactions>>>Outgoing excise invoices>>>Maintain default excise groups and series groups.
Once after removing the export type to your sales area combination--system will show this error--and we cannot even post the Excise invoices.(J1IIN)
I tried in my IDES--that with export type(Ex.Export under Bond)--with this assignment--i am able to post my excise invoices.
Once after removing this assignment of export type--again i am getting this error.
Actually i am not even aware why it is happening--almost after two months of struggle--i find this.
(i feel it is in the same way that we cannot even open/See a sales order by deleting sales group which was created&used previously)
i am sharing this because somebody may get a little help with my thread.
Mark this if helpful--there by others can easily find this thread.
Phanikumar

New preview function for iPad–error message "Multiple page sizes not supported"

When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x 1296. I would really like to preview this folio before publishing. Any suggestions?

If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

If Statement Multiple Conditions

Using LiveCycle, FormCalc or JavaScript.
I am trying to create an if statement with multiple conditions.
a Sum field calculates a series of numeric input fields. I want the result in the Sum field to determine the expression in a final field.
If the Sum is <30MM then "50000" also if the Sum is >30MM but <60MM then "125000" also if the Sum is >60MM but <100MM then "250000" also if the Sum is >100MM but <300MM then "375000" also if the Sum is >300MM then "500000"
I have only been able to figure out a single if then for the first condition but not able to include the whole set of conditions and the multiple results.
Help would be much Appreciated!
Thank you in advance.

Tried a few variations of this and still seem not
to be able to find a solution to this issue. I'm surprised my google searches are bringing up better examples because there seems to be an example of everything else.
Any more detailed advive?

Error on multiple condition

Similar Messages

Maybe you are looking for