Error on OAB Confirmation Statement

I am hoping someone can help me with this error. When an employee makes their benefit elections in OAB, the confirmation page is displaying their total bi-weekly pre-tax deduction with trailing cents.
For example: $20.73 would appear as $20.734000
Do you know of any patches to help correct this error? Any help would be appreciated.

Hi,
try below given code
DECLARE
   v_statement   VARCHAR2 (500);
   CURSOR mov_tab_to_erp_tbsp
   IS
      SELECT t.table_name
        FROM user_tables t
       WHERE t.tablespace_name = 'SYSTEM' OR t.tablespace_name = 'USER';
BEGIN
   FOR y IN mov_tab_to_erp_tbsp
   LOOP
/* Build the statement */
      v_statement :=
                    'Alter table ' || y.table_name || ' Move tablespace ERP';/* removed ';'*/
      EXECUTE IMMEDIATE v_statement;
   END LOOP;
END;*009*

Similar Messages

  • ADS Error when opening Benefits Confirmation Statement

    Hello,
    I am on EP7.0 NW04s ECC6.0 and trying to open Benefits Confirmation Statement in ESS and when clicking on it I get the following error with the SAP GUI in the portal saying :
    ADS : Request Start Time : Tue Oct 09 13:43:00 CDT 2007(200101)
    and this is happening only for one UserId.
    I wonder for the cause for this.
    Any help would be highly appreciated.
    Message was edited by:
            SubhashTripathi

    Hi Subhash,
    Please check in your visual administrator to see whether you have <u>properly installed</u> the credential file for Reader Rights . Do this as described in "Installing and Configuring Credentials" in the Adobe Document Services Configuration Guide and note 736902.
    Regards,
    Shyam.

  • ADS Error when trying to open Benefits Confirmation Statement

    Hello,
    I am on EP7.0 NW04s ECC6.0 and trying to open Benefits Confirmation Statement in ESS and when clicking on it I get the following error with the SAP GUI in the portal saying :
    ADS : Request Start Time : Tue Oct 09 13:43:00 CDT 2007(200101)
    and this is happening only for one UserId.
    I wonder for the cause for this.
    Any help would be highly appreciated.
    Message was edited by:
            SubhashTripathi

    Hi Subhash,
    Please check in your visual administrator to see whether you have <u>properly installed</u> the credential file for Reader Rights . Do this as described in "Installing and Configuring Credentials" in the Adobe Document Services Configuration Guide and note 736902.
    Regards,
    Shyam.

  • Error while generating remuneration statement

    Hi
    I found an error, while generating remuneration statement. The error is "Start date 01.01.1800 is higher than end date 00.00.0000".
    Kindly help
    Shadeesh

    Hi shadeesh,
    Please check the payroll control record's start date and end date in PA03
    regards,
    Ayyaps

  • Length error occured in IMPORT statement

    Hello everyone,
    i hv one requirment in PO print(ME23N). in po print asset no nt display without changing other format.
    so that i first copy both smartform and driver program, in that i made certain changes such that i declare the patameter p_ebeln and i comment to data statement of p_ebeln & p_ebeln = nest-objky.
    then i join asset no (anek-anln1) with the help of inner join. then in smartform i gave condition that if bsart = 'ZCAP'
    wa_final-anln1 = gv_anln1.
    endif.
    i import gv_anln1 in smartform and exported in deriver program.
    both are synthetically currect but when i gave print preview dump is occured.
    length error occured in IMPORT statement
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
         not caught in
        procedure "%GLOBAL_INIT" "(FORM)", nor was it propagated by a RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        During import the system discovered that the target object has
        a different length than the object to be imported.
    what i do?

    Hello,
    can u send me coding for that?
    program line is already created for that
    and their first coding is like that,
    if gv_bsart = 'ZCAP'.
    wa_final-matnr = space.
    endif.
    and in text they fetch matnr no.
    but as per requirement they want asset no when bsart = 'ZCAP'
    how that asset no will come.
    matnr comes there is bsart is other that ZCAP, but bsart = ZCAP they want asset no instead of matnr.

  • Length error occurred in IMPORT statement.

    Hi All,
               while exexuting a program i got dump saying that Length error occurred in IMPORT statement. through ST22 i came to know that both import and export structres are not same. Import structure is longer than the export structure.
             I tried in SDN but i coudnt find any solution. can you please suggest how to solve this.
    Thanks in advance,
    Sreekala.

    Hi,
    Maybe what you can do si....
    Program X
    data: v_var(20) type c.
    export v_var.
    Program Y
    data: v_var(20) type c,
             v_var2(50) type c.
    import v_var.
    v_var2 = v_var.
    Create a variable that is exactly the same with the exporting parameter, then just assign it to a local variable declared in the 2nd program.
    Hope this helps.
    Benedict

  • Error while replacing IF statements with DECODE function in procedure

    Hi All,
    I have created a procedure which has nested IF statements. Now I want to replace the IF statements with DECODE functions to improve performance.
    Procedure:
    IF (var_int_sev = '0')
    THEN
    var_sev := '2';
    ELSE
    SELECT sev
    INTO var_int_sev
    FROM errorconfig
    WHERE errorcode = var_errorcode;
    var_sev := var_int_sev;
    END IF;
    I converted the above IF statement into DECODE function as mentioned below:
    var_Sev := DECODE(var_int_sev,0,2,SELECT severity FROM errorconfig WHERE errorcode=var_ErrorCode)
    But it throws below error at the select statement used inside DECODE.
    Error(58,51): PLS-00103: Encountered the symbol "SELECT" when expecting one of the following: ( - + case mod new not null others <an identifier> <a double-quoted delimited-identifier> <a bind variable> avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp interval date <a string literal with character set specification> <a number> <a single-quoted SQL string> pipe <an alternatively-quoted string literal with character set specification> <an alternativ
    Can someone help me in converting the IF to DECODE in the above case. Also how can we use a select statement inside decode.

    instead of trying to rewrite all your code and hoping that the performance will be better, it's a better option to investigate and find out which part of your application is slow
    read this:
    When your query takes too long ...

  • Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

    Hi,
    We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
    Error: 4014, Severity:20, State: 11.   A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
    SQL Server Data Tools and SQL Server Database Engine reside on the same server.
    We tried the following:
    Disabling TCP Chimney Offload
    Installed Windows Server 2008 SP1
    Splitting our SSIS code into multiple steps so it is not all one large continuous operation
    The error occurs during a BulkDataLoad task.
    Other options we are investigating with the engineering team (out-sourced, so delayed responses):
    Firewall configurations (everything is local, so this should not make a difference)
    Disabling the anti-virus scanner
    Are there other things we can try?
    Any insight is greatly appreciated.
    Thanks!

    Hi HenryKwan,
    Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
    Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
    Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
    Set "RetainSameConnection" Property to FALSE on the all the connection managers.
    Reference:
    https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
    If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Error while posting confirmation for limit PO

    Hi Experts,
    we are having a standalone scenario(SRM 7) and the issue is as mentioned below
    The situation is that the PO is a limit order with 2 line items. The first line item is complete and has been closed off with the u201Cno further confirmation/invoiceu201D indicators selected. However the 2nd line still has some limit remaining but the when the central confirmations attempts to enter a good receipt against the line they get an error message which is "No Confirmation could be entered for purchase order"
    please guide me how to solve this.
    regards
    smita

    Hi,
    please find furhte information.
    a limit sc is created for a value of 37000 GBP and after approval it created a PO. but the user went and added a line item directly in PO for 40000 GBP. Now the total value of SC is 77000 GBP.
    user has created a confirmation for 36000GBP and selected no confirmation required further.there is no issues with this lin item
    but with the second line item he posted confimation for value 37000 gbp and invoiced for 30000 GBP.
    when i am trying to post confirmation for 3000 GBP system is throwing an error that "no confirmation could be entered for purchase order"
    could any one guide me how to solve this or any suggestions for solving this.
    regards
    smita

  • Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

    I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
    Thanks,
    Paul
    spid24s     Error: 28005, Severity: 16, State: 2
    spid24s     An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
    or you do not have permission.

    Hi Paul,
    I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
    So when his AD account got deleted, the database had NULL as owner
    Using the following query I asked for the owners of the databases:
    select name, suser_sname(sid) from master.dbo.sysdatabases
    So changing the owner of the databases that had a NULL owner solved the issue for me.
    use <databasesname>
    go
    exec sp_changedbowner 'sa'
    Thanks for triggering the solution.
    Peter

  • Error while doing confirmation with cor6

    Dear PP gurus,
    I am getting following error while doing confirmation. please suggest.
    "Error while importing from memory QAPO SAPLQEEV
    0400000363"
    Thanks in advance
    Kailash T.

    Hi,
    The structure QAPO relates to Inspection operation records & the program - SAPLQEEV relates to Spec. tables for results recording. Hence would suggest to discuss this with your QM personnel.
    Also was able to find a link which had a same issue, but no solution posted, have a look if it helps in anyway
    http://www.sapfans.com/forums/viewtopic.php?f=27&t=173200
    Also refer to OSS note - 334400. If all the above does not resolve the issue, raise an OSS message with SAP.
    Regards,
    Vivek

  • Error: unexpected XML reader state. expected: END but found: START:

    I am getting following error while invoking method 'GetVersionInfo' (.net web service over dll) which takes one input parameter(string) and gives two output parameters(both short):
    ERROR at line 1:
    ORA-29532: Java call terminated by uncaught Java exception: deserialization
    error: unexpected XML reader state. expected: END but found: START:
    {UPPLink}pnVersionMajor
    ORA-06512: at "SYS.UTL_DBWS", line 388
    ORA-06512: at "SYS.UTL_DBWS", line 385
    ORA-06512: at line 40
    Expected Request is as follows:
    POST /UPPLink/UPPLink.asmx HTTP/1.1
    Host: 172.16.1.38
    Content-Type: text/xml; charset=utf-8
    Content-Length: length
    SOAPAction: "UPPLink/GetVersionInfo"
    <?xml version="1.0" encoding="utf-8"?>
    <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Body>
    <GetVersionInfo xmlns="UPPLink">
    <ignore>string</ignore>
    </GetVersionInfo>
    </soap:Body>
    </soap:Envelope>
    EXpected Response is as follows:
    HTTP/1.1 200 OK
    Content-Type: text/xml; charset=utf-8
    Content-Length: length
    <?xml version="1.0" encoding="utf-8"?>
    <soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
    <soap:Body>
    <GetVersionInfoResponse xmlns="UPPLink">
    <GetVersionInfoResult>
    <pnVersionMajor>short</pnVersionMajor>
    <pnVersionMinor>short</pnVersionMinor>
    </GetVersionInfoResult>
    </GetVersionInfoResponse>
    </soap:Body>
    </soap:Envelope>
    The PL/SQL code I am using is as follows:
    DECLARE
    service_ sys.utl_dbws.SERVICE;
    call_ sys.UTL_DBWS.call;
    service_qname sys.utl_dbws.QNAME;
    port_qname sys.utl_dbws.QNAME;
    operation_qname sys.utl_dbws.QNAME;
    string_type_qname sys.utl_dbws.QNAME;
    number_type_qname sys.utl_dbws.QNAME;
    retx ANYDATA;
    strEntry VARCHAR2(100);
    retx_string VARCHAR2(100);
    majorVersion NUMBER;
    minorVersion NUMBER;
    params sys.utl_dbws.ANYDATA_LIST;
    v_outputs sys.utl_dbws.anydata_list;
    BEGIN
    dbms_output.put_line('Starting Function');
    service_qname := sys.utl_dbws.to_qname(null, 'UPPLink');
    strEntry := 'vab';
    dbms_output.put_line('Creating Service');
    service_ := sys.utl_dbws.create_service(HTTPURITYPE('http://172.16.1.38/UPPLink/UPPLink.asmx?WSDL'), service_qname);
    dbms_output.put_line('Creating Operation');
    operation_qname := sys.utl_dbws.to_qname(null, 'GetVersionInfo');
    dbms_output.put_line('Calling Service');
    call_ := sys.utl_dbws.create_call(service_, null, operation_qname);
    sys.utl_dbws.set_property(call_, 'SOAPACTION_USE', 'true');
    sys.utl_dbws.set_property(call_, 'SOAPACTION_URI', 'UPPLink/GetVersionInfo');
    sys.utl_dbws.set_property(call_, 'OPERATION_STYLE', 'rpc');
    string_type_qname := sys.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
    number_type_qname := sys.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'short');
    sys.utl_dbws.add_parameter(call_, 'ignore', string_type_qname, 'ParameterMode.IN');
    sys.utl_dbws.add_parameter(call_, 'pnVersionMinor', number_type_qname, 'ParameterMode.OUT');
    sys.utl_dbws.set_return_type(call_, number_type_qname);
    params(0) := ANYDATA.convertvarchar2(strEntry);
    dbms_output.put('Invoking with Input Parameter: ');
    dbms_output.put_line(ANYDATA.ACCESSVARCHAR2(params(0)));
    retx := sys.utl_dbws.invoke(call_, params);
    dbms_output.put_line('Invoke complete');
    majorVersion := retx.accessnumber;
    dbms_output.put_line('Major Version ' || majorVersion);
    v_outputs := SYS.utl_dbws.get_output_values(call_);
    minorVersion := ANYDATA.AccessNumber(v_outputs(1));
    dbms_output.put_line('Minor Version ' || minorVersion);
    sys.utl_dbws.release_service(service_);
    END;
    /

    Actually, the name needs to match what is specified in the WSDL file.

  • Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network

    We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
    I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
    to O/s and Networking Team they seem to have no clue, why this error occurs
    Server: Virtual Machine
    Operating System: WINDOW 2008 R2 SP1
    MSSQL 2008 STD ED SP3 10.0.5850.0
    Database mirroring is configured for the application database.
    Antivirus enable on the database server
    How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
    What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
    Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
    Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
    [email protected]

    Hello,
    Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
    or from the host where SQL Server is installed?
    Network Monitor can be downloaded from the following link:
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
    maybe is not the SQL Server host.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Where is the syntax error in my Insert statement?

    It says that there is a syntax error in my insert statement, pointing to the .ExecuteNonQuery() at the end:
    'Defining the activity ID from the datatable
    Dim ActivityID As Integer = DataTableActivities.Rows(0).Item(0)
    'Defining the calories from the datatable
    Dim calories As Decimal = (DataTableActivities.Rows(0).Item(3)) * (DurationNum.Value / 60)
    'Insert statement to add new training events
    Dim SqlQueryActivityInsert As String = "INSERT INTO tblTraining (RunnerID, ActivityID, Full_Name, Time, Calories_Burnt, Date) VALUES (@RunnerID, @ActivityID, @Full_Name, @Time, @Calories, @Date)"
    Dim SqlCommandActivity As New OleDbCommand
    With SqlCommandActivity
    .CommandText = SqlQueryActivityInsert
    .Parameters.AddWithValue("@RunnerID", LoginForm.UserIDlbl.Text)
    .Parameters.AddWithValue("@ActivityID", ActivityID)
    .Parameters.AddWithValue("@Full_Name", LoginForm.Full_Namelbl.Text)
    .Parameters.AddWithValue("@Time", DurationNum.Value)
    .Parameters.AddWithValue("@Calories", calories)
    .Parameters.AddWithValue("@Date", WeekPicker.Value)
    .Connection = conn
    .ExecuteNonQuery()

    Viorel is right.  The 'Date' field is probably throwing it off.  Date is a reserved word. 
    https://www.drupal.org/node/141051
    Putting square brackets [] around the field name should get it working for you.
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

  • Please help --Error in insert into Statement

    Error in insert into statement while connecting to ms-access.
    import java.sql.*;
    public class stupid8
         public stupid8()
              try{
                   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                   Connection con=DriverManager.getConnection("jdbc:odbc:Driver={MicroSoft Access Driver (*.mdb)};"+"DBQ=d:/Servlet/registration.mdb");
                   PreparedStatement s=con.prepareStatement("insert into Deposit (username,date,amount) values(?,?,?)");
                   s.setString(1,"username");
                   s.setString(2,"date");
                   s.setString(3,"amount");
                   s.executeUpdate();
                   System.out.println("Success");
              catch(Exception e)
                   System.out.println("Error: "+e);
         public static void main(String args[])
              new stupid8();
    }

    My first guess is that the database is objecting to the use of "date" as a column name; "date" is often a reserved word in databases.
    It would be less of a guess if you posted the actual error message.

Maybe you are looking for

  • HTTP REST API call to CPSC 10.x from an external system

    Hi, I would like to know the below items. Is it possible to connect with the CPSC 10.x from an external system via HTTP REST API call to process a request and complete a task? Is it possible to create a new ticket / request in CPSC for a specific ser

  • WORD document becomes blank or corrupted after being uploaded to a Document Library programmatically?

    Hi everyone, I uploaded a WORD document to a Document Library with this code: using (SPSite currentSite = new SPSite(SPContext.Current.Site.ID)) using (SPWeb currentWeb = currentSite.OpenWeb("Departments")) currentWeb.AllowUnsafeUpdates = true; SPLis

  • When calling method error .class expected

    First the method I'm calling. public void ExeSqlStmt(String sqlStmt, String columnNames[], String connectString, String userName, String password,int numColumns) This compiles clean. The code that calls the method is giving me fits with expecting .cl

  • Flickering during playback in Premiere Pro (CS6)

    Hello everyone..  I work in the IT department, and I am trying to assist a user with a problem they are having with Premiere Pro.  Let me preface this by saying I know nothing about how to use Premiere.. I am not the user, I just install it and make

  • Bringing very complicated Illustrator files with spot color into ID?

    I'm putting together the files for printing the first collection of my current comic book. Normally I'd just output 300dpi TIFFs, but I'm using a spot color overlay in this project. Does anyone know the best way to get this into InDesign with the spo