Error on script execution

I have just tried to execute the script from this site: http://hax.by/3ds/index.html
With this script I want to make my own Nintendo Zone with Mac address scwitchig to get the most possible contacts. But everytime I try to execute this script I got an error message.
This is the error message I get:
ifconfig: ioctl (SIOCAIFADDR): Invalid argument
/tmp/internetsharing.scpt:129:183: execution error: System Events got an error: Can’t get menu "View" of menu bar 1 of process "System Preferences". (-1728)
Now spoofing: <!DOCTYPE
Sorry for my bad english skills.. I hope someone can help me..

instead of solution but try to understand why u get that error So start with basics formula
Simple calc
Data Cache in K
______________ = Number of blocks that can be allocated
Block Size in K
The answer will probably be around the number of blocks found in the error message (cannot allocate more than [n] blocks). This number should be compared with the CALCLOCKBLOCKDEFAULT setting. If this setting is 200 and the allocated block number is less than 200, data cache needs to be increased. The recommended size to increase it would be 200 x 2 x blocksize (in K). That way, the cache is sized big enough to hold 200 blocks.
Which i see CALCLOCKBLOCKDEFAULT setting is 200 in your config file and allocated block number is larger than 200, then change the CALCLOCKBLOCKDEFAULT setting to a higher number like 400 for example. Set this in the essbase.cfg file. Essbase needs to be restarted for those settings to take effect.
Data Cache needs to be set high enough to hold 400 blocks (to calculate: 400 x 2 x blocksize (in K)).
If this same error occurs after the above changes once calculation is run , then checks needs to be done to see how many blocks can be allocated from the heap. If it is 400, need to change the CALCLOCKBLOCKDEFAULT setting again to a higher number than 400. This process needs to be repeated till the error message goes away.
Review your database Block Size. The recommended size is between 8Kb and 100Kb.
The Block Size is determined by the number of stored members in each dense dimension.
So bottom line is increase to 400 and see if u get nay error :)
Make sure Database needs to be restarted in order for the new settings to take effect.

Similar Messages

Error when using FTP in iWeb 09! "Error 500: Script Execution Failure"

I have my domain through 123-reg and I have free hosting with host-ed.net when I add a simple index.html file my website works fine displaying the 1 line of text that I asked for, so it is all configured correctly.
How ever when I use the FTP upload thought iWeb '09 I always get "Error 500: Script Execution Failure"
www.breslan.co.uk
Anyone know why?

I have logged into my hosting and changed the permissions to '755' and move the files from the folder iweb used to the root of the site i know get "Parse error: syntax error, unexpected T_STRING in /~/www/breslan.co.uk/index.html on line 1" there is only 1 line of code in index.html and that is
<?xml version="1.0" encoding="UTF-8"?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><title></title><meta http-equiv="refresh" content="0;url= Welcome.html" /></head><body></body></html>
please help!

Test Script execution failed.

I'm getting the Test Script Execution Error - "Test Script execution failed. Reason: The system cannot find the file specifiied"
This is happening to all my test script files. I can load the test script files, edit the test cases, etc, but cannot execute the test scripts
If I click on View Test Script Specification, they all come up, and the report shows all the cases in the test script.
If I look into the directory, they are all there, with the .tsc extension and a file type of TSC
I created a new TSC this morning, but with the same results
They were working yesterday. Since then, I did rename one of the test scripts, and changed my build platform from .NET to Java.
Any thoughts?
Thanks,
Allan Gibson
P.S. I also now note the my what-if analysis files do not run, and are getting a message: run time error '-2146233088 (80131500)': Batch process has failed. Reason: the system cannot find the file specified (OPA-E00241). When I press the debug button, I'm taken to a screen where the line "Call GetExcelCompilerProxy() .Analyze(ActiveWorkbood)" is highlighted in yellow.
Edited by: A Gibson on 11-Sep-2012 9:02 AM
Edited by: A Gibson on 11-Sep-2012 9:09 AM

Hey Allan,
It looks like it either can't find the Java component it needs to run or the test script for some reason. If you look in the bin directory of the OPM install (which is normally something like c:\program files\Oracle\Policy Modeling\bin) do you see a file called determinations-remote-clr.jar? If not it sounds like something's gone wrong with your install.
If so, can you run the test script in the standalone debugger? Also, if you look at the absolute path of your test script file, does it contain any non-ascii characters? If so, try removing those characters and see if it works.
Thanks,
Kristy

Error with dbms_scheduler and shell script execution

Hi,guys.
I have an issue with a dbms_scheduler and a shell script execution. So, the shell script as it self works fine, when i'm executing ./test.sh all process is running, but when i'm executing the script from dbms_scheduler it just simply doesn't work. Actually it works, but some of executable information in sh doesn't work, seems it just jump over of the part of the script. Sendmail part is running, maybe there is problem with rman script as it self?
DB version: 10g
And my scripts:
Shell scripts (permisons 755):
#!/bin/ksh
export PATH=/home/oracle/product/asm_home/bin:/home/oracle/product/db_home/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.
export ORACLE_BASE=/home/oracle/product
export ORACLE_SID=zabbix
export ORACLE_HOME=/home/oracle/product/db_home
${ORACLE_HOME}/bin/rman<<EOF
connect target /
run {backup recovery area delete all input;}
EOF
{       echo "From:[email protected]"
        echo "To: [email protected]"
        echo "Subject: Recovery area"
        echo 'Content-Type: text/html'
        echo
        echo '<html><body><table border="1" cellspacing="1">'
        echo '<tr><td><b>Process</b></td><td><b>Statuss</b></td></tr>'
        echo "<tr><td>RMAN</td><td><b>Works</b></td></tr>"
        echo "</table></body></html>"
} | sendmail -tIn the first part i'm exporting all of the important stuff for oracle, then I call RMAN with specific atributes. And then there is just simply sendmail functionality inside script to represent if script works (for now).
And below pl/sql script:
begin
DBMS_SCHEDULER.CREATE_JOB
job_name => 'FLASH_RECOVERY',
job_type => 'EXECUTABLE',
job_action => '/home/oracle/backup/test.sh',
start_date => sysdate,
job_class => 'DEFAULT_JOB_CLASS',
enabled => TRUE,
auto_drop => FALSE,
comments => 'FLASH RECOVERY USAGE AREA backup and delete'
END;
/And this job execution:
       begin
           DBMS_SCHEDULER.run_job (job_name =>'FLASH_RECOVERY',use_current_session => TRUE);
       end;What can be wrong? For me, I think it's something with permisions.
I hope you got my idea and could help me.
Tom
Edited by: safazaurs on 2013.18.2 22:16

There is no error, i just receive all the time e-mail, seems it jumps over rman. I tried almost everything and still couldn't get result as i want. And, if i'm running script from command line - it works. Rman calls, and starts to recover archivelogs.

Script execution problem

dear sir
i got a problem with script execution. i have successfully activate the form painter in ABAP editor. but i am getting the error like "Form ZLASRISUD language EN is not active and has no errors". please give me the solution for above as soon as possible.

dear sir
i got a problem with script execution. i have successfully activate the form painter in ABAP editor. but i am getting the error like "Form ZLASRISUD language EN is not active and has no errors". please give me the solution for above as soon as possible.

Report script execution is getting failed

Hi ,
We are facing one strange issue while executing the Essbase report script. I am new to the report script and I am not getting how to resolve the issue.
When we are changing the year in code from FY13 to FY14 the script is getting failed however the same script is successfully generating the report if we keep year as FY13 in code.
Could you please let me know where would be the problem , below is the part of the code form Report script.
{MISSINGTEXT "0"} // replace #Missing with 0
<Link ((<LEV("Customer", "Lev0,Customer")) AND ( <IDESC("All Customers")))
<Link ((<LEV("Product", "Lev0,Product")) AND ( <IDESC("All Products")))
<Link ((<LEV("Period", "Lev0,Period")) AND ( <IDESC("YearTotal")))
FY14

Hi ,
I am getting below error message.
"Report Script execution Failed. Please see message panel for details " and in message panel It is not showing any details , just displaying Execute Report script Failed with date and time details.
I also checked that FY14 do exist in the application and no duplicate FY14 member exist in the outline.
Could you please suggest where would be the problem.

Help 'Exiting' after Automator Shell Script Execution

Hello,
I've recently installed and got running GCalDaemon (http://gcaldaemon.sourceforge.net/) which allows me to Synch Rainlendar <-> Google Calendar through iCal (You can also synch iCal <-> Google Calendar). I needed to start up a shell script/applescript after each startup/login in order for GCalDaemon to start the synching process each time and continue to do so at the timed intervals. I would do so by the following terminal code:
cd /usr/local/sbin/GCALDaemon/bin
./standalone-start.sh
I then tried automating this process and came across shell script execution through Automator. I did so and created a .app with the above mentioned code. This works and it starts up the necessary .sh file I need and the snyching works under StartUp. My concern is however, how do I exit terminal once the code has executed the necessary file? All I have in my .app is the above mentioned code for now. I just need it to exit terminal because on startup or after starting the program, I get this issue (See Attachment)
This continues to run, so my guess is that I need to add code to exit terminal and allow the .app to close itself properly after doing so.
Please guide me in the right direction.
Picture Belows shows what happens when I run the Automator App. It continues to run until I quit out of the app manually (TheGCal programs works fine though). I feel I need to have app quit Terminal or fully end the process and quit out on it's own.
Thanks
<table style="width:auto;"><tr><td></td></tr><tr><td style="font-family:arial,sans-serif; font-size:11px; text-align:right">From GCalDaemon</td></tr></table>

i redirected the command output to /dev/null which is unix equivalent of a black hole and I also redirected error output to standard output in case the script produces any errors.
also & at the end tells it to continue without waiting for the script to finish.
Message was edited by: V.K.

Error on KEB0 execution ? = Program error: BI service API(component BC-BW)

Error on KEB0 execution ?
Iu2019m trying to create a data source on KEB0, but when I try to create, the system give this error:
u201CProgram error: BI service API (component BC-BW) terminated: MAPI
Message no. R8401u201D
Some one knows this message ?
Thanks !

Marcus, have you checked following Note?
504847 - Termination when creating a CO-PA DataSource

Error in XPRA EXECUTION Phase of Add On installation in SAP sys in SAINT

Hello All,
I have tried to install VERSANH ADD On on my SAP System with SPAM Version 7.00 <0032 kernal level 48.
i have run transaction SAINT imported all PAT and ATT files and started the process.
now after running around 16 Hrs it is throwing error in XPRA EXECUTION Phase.
The Error is
The Add on installation terminated during phase XPRA EXECUTION
Choose CONTINUE to continue the import
Choose BACK to delete the installation queue
Choose LOGS to display the import logs
i have clicked on Continue, the it process and after 1 Hr throws same error
i have navigated to OS Level in usrsaptranslog and there in log i am getting this line as error
ERROR RFC function TRINT PROGRESS INDICATOR returned 18
Thanks in advance.
Edited by: Vinit Soni on Apr 14, 2009 11:05 AM
Edited by: Vinit Soni on Apr 14, 2009 11:06 AM
Edited by: Vinit Soni on Apr 14, 2009 11:07 AM
Edited by: Vinit Soni on Apr 14, 2009 11:08 AM

Please check the log files under /usr/sap/trans/tmp directory. There will be some information about the error and paste the log here to analyze the problem.
Regards,
Subhash

SMQ2: SYSFAIL Comparison error during the execution of a simple

Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, Martin

You seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek.

Hi installed Photoshop Cs6 on my Vista os and crashes gives following error DEP (Data Execution Prev

Hi installed Photoshop Cs6 on my Vista os and is crashing the Photoshop and gives following error DEP (Data Execution Prevention) can someone help me..

no I did not receave any errors during instalation. Yes I installed it before but occured same problem so I unstalled and made a new isntall.
I found these in the end of the log hope these helps.
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 4460] Fri Nov 02 19:54:12 2012 INFO
Exit Code: 0 - No error.
Please see specific errors and warnings for troubleshooting. For example, WARNING: DF029, DW024 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

Error saving script

I have a bit of a apprentice-like question.
Whenever I try to to save my script I get a small window that says
"Error Saving Script"
I have tried opening other scripts to see if it only pertained to mine, but it happens every time.
Thanks

Click the Console tab on the right to see if it is displaying a message. Also try saving the script to a different filename and location, to see if that makes a difference.

Automation Script execution

Hello All,
How i will do Automation script execution in Production
We have a bunch of scripts (Packages , DDL & DML ) everyday. What is the better aproach to do automatic script execution without any issues ?

Hi,
You have two options.
1) Oracle job scheduler
2) Windows Tasks
Oracle job scheduler you can run it by your requirement. you can create it like below:-
begin
DBMS_SCHEDULER.CREATE_JOB(
JOB_NAME           =>      'JOB_FOR_TEST',
JOB_TYPE           =>      'PLSQL_BLOCK',
JOB_ACTION         =>      'begin YOUR_PROCEDURE_NAME; end;',
START_DATE         =>      SYSTIMESTAMP,
END_DATE           =>      NULL,
COMMENTS           =>      'JOB IS CREATED FOR TEST ONLY.',
ENABLED            =>      TRUE,
REPEAT_INTERVAL    =>      'freq=daily; byhour=20; byminute=0; bysecond=0;');
end;
/Above job will run on 8pm daily.
likewise since i dont know whether you are on windows or linus or unix etc... you can scheduler windows level tasts...

Get Agent IP Address During Script Execution

Good Evening,
I'm looking for a little advice... I'm trying to develop a method of alerting agents to the fact they are not ready. I have a script that can dynamically change the wallpaper on an IP phone. My aim is to add a step to the "Select Resource" portion of a script that will execute if an agent doesn't answer a call presented to them. However in order for this script to work it requires the IP address of the phone the agent is logged on to. Can anybody recommend a method of getting this IP dynamically during script execution? We use EM so statically defining IPs in an XML document wouldn't be appropriate.
On a similar note I'd also need a method of executing the same script when an agent manually alters their state to ready. i.e. When they change to ready on the IP Phone Agent I'd like to be able to intercept that process as it takes place and automatically trigger this same script.
I'm using UCCX 8.5(3).
Hope that makes sense. Any suggestions regarding how to achieve this would be much appreciated.
Much appreciated,
Ryan

I don't write enough scripting to know for sure if the agent's phone's IP address would be available anywhere in the UCCX enviornment by default but I'm going to go with 'probably not'. You'd need to obtain this information from CUCM, the most straightforward method would likely be to use CUCM's AXL interface to pull this information. The HTTP Document Step may be able to produce the necessary AXL requests I guess, but I've never tried.
Cheers,
Kris

Fatal error in script

I am getting a fatal error at script line 1087 "unable to open destination
file" when trying to install my cvi project under win98. It works fine under
NT. What should I do?

"Rick Bernstein" wrote:
>>I am getting a fatal error at script line 1087 "unable to open destination>file"
when trying to install my cvi project under win98. It works fine under>NT.
What should I do?
Hi Rick,
One thing that you can check up for , is to make sure that you have a Temp
directory on your machine, where you are installing the program.
You may also want to set a Temp environment variable in autoexec.bat before
you
try to install anything..
Hope this info help....
Regards,
nandan dharwadker
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

Error on script execution

Similar Messages

Maybe you are looking for