[Error ORABPEL-10039]: invalid xpath expression - array processing

hi,
I am trying to process multiple xml elements
<assign name="setinsideattributes">
<copy>
<from expression="ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')"/>
<to variable="ssn"/>
</copy>
</assign>
where iterator is a index variable .
I am getting into this error .
Error(48):
[Error ORABPEL-10039]: invalid xpath expression
[Description]: in line 48 of "D:\OraBPELPM_1\integration\jdev\jdev\mywork\may10-workspace\multixm-catch\multixm-catch.bpel", xpath expression "ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')" specified in <from> is not valid, because XPath query syntax error.
Syntax error while parsing xpath expression "ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')", at position "77" the exception is Expected: ).
Please verify the xpath query "ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')" which is defined in BPEL process.
[Potential fix]: Please make sure the expression is valid.
any information on how to fix this .
thanks in advance

check out this note here
http://clemensblog.blogspot.com/2006/03/bpel-looping-over-arrays-collections.html
hth clemens

Similar Messages

Concat Operation failing.[Error ORABPEL-10039]: invalid xpath expression

Hi ,
I am trying to concat two values which are as mentioned below
concat(bpws:getVariableData('paramsVar','/ns7:parameters/ns7:item[ns7:name='ContractNumber']/ns7:value'),bpws:getVariableData('AccumilateEmail','/ns1:AccumilatePLAContracts/ns1:AccumilatePLAType[$PLACount]/ns1:ContractInfoType[$ContractInfoTypeCount]/ns1:ContractNumber'))
to /ns7:parameters/ns7:item[ns7:name='ContractNumber']/ns7:value (which is same as first parameter of concat operation)
the error is [Error ORABPEL-10039]: invalid xpath expression
[Description]: in line 681 of "C:\Users\varsha.tm\Desktop\InitiateMaintainContractRolesEmail\bpel\InitiateMaintainContractRolesEmail.bpel", xpath expression "concat(bpws:getVariableData('paramsVar','/ns7:parameters/ns7:item[ns7:name='ContractNumber']/ns7:value'),bpws:getVariableData('Ac
cumilateEmail','/ns1:AccumilatePLAContracts/ns1:AccumilatePLAType[$PLACount]/ns1:ContractInfoType[$ContractInfoTypeCount]/ns1:ContractNumber'))" specified in <from> is not valid, because XPath query syntax error.
Syntax error while parsing xpath expression "concat(bpws:getVariableData('paramsVar','/ns7:parameters/ns7:item[ns7:name='ContractNumber']/ns7:value'),bpws:getVariableData('AccumilateEmail','/ns1:AccumilatePLAContracts/ns1:AccumilatePLAType[$PLACount]/ns1:ContractInfoType[$ContractInfoTyp
eCount]/ns1:ContractNumber'))", at position "76" the exception is Expected: ).
Please verify the xpath query "concat(bpws:getVariableData('paramsVar','/ns7:parameters/ns7:item[ns7:name='ContractNumber']/ns7:value'),bpws:getVariableData('AccumilateEmail','/ns1:AccumilatePLAContracts/ns1:AccumilatePLAType[$PLACount]/ns1:ContractInfoType[$ContractInfoTypeCount]/ns1:Co.....
I also tried converting both the variables of concat to string and then giving to concat operation. please let me know what could be the possible way to do this

Hi,
try storing the values of the below into a separate variables var1,var2 and then use concat(bpws:getVariableData('var1'),bpws:getVariableData(var2))....also try using the predicate[] without
bpws:getVariableData for the below variables...for this in the assign activity create copy operation window....u see the xpath text box and u can mention the predicate values there...some
thing like */ns7:parameters/ns7:item[ns7:name='ContractNumber']/ns7:value* , *ns1:AccumilatePLAContracts/ns1:AccumilatePLAType[$PLACount]/ns1:ContractInfoType
[$ContractInfoTypeCount]/ns1:ContractNumber* instead of the below values
bpws:getVariableData('paramsVar','/ns7:parameters/ns7:item[ns7:name='ContractNumber']/ns7:value')
bpws:getVariableData('AccumilateEmail','/ns1:AccumilatePLAContracts/ns1:AccumilatePLAType[$PLACount]/ns1:ContractInfoType[$ContractInfoTypeCount]/ns1:ContractNumber')

ORABPEL-09503 Invalid xpath expression in a CASE expression

Hi I have the following case statement in my BPEL process -
<switch name="checkAuthenticateResult">
<case condition="upper-case(string(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_RETURN_STATUS')))='S' AND upper-case(string(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_TKT_VALID')bpws:getVariableData('isAuthenticCaller'))) = 'T'">
<bpelx:annotation>
<bpelx:pattern>authenticatePass
</bpelx:pattern>
</bpelx:annotation>
<assign name="assignTktOutput">
<copy>
<from expression="boolean(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_TKT_VALID')='T')"/>
<to variable="outputVariable" part="payload" query="/client:WshSendTxnToOtmServiceProcessResponse/client:result/ns2:authenticated"/>
</copy>
</assign>
</case>
<otherwise>
<throw name="throwAuthenticateFail" faultVariable="g_faultVariable" faultName="faultError"/>
</otherwise>
</switch>
When I run my process in 10.1.2, it works fine, but when I run it in 10.1.3.1, it errors out with the following error -
<Faulthttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>env:Server</faultcode>
<faultstring>ORABPEL-09503 Invalid xpath expression. Error while parsing xpath expression "upper-case(string(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_RETURN_STATUS')))='S' AND upper-case(string(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_TKT_VALID')bpws:getVariableData('isAuthenticCaller'))) = 'T'", the reason is Unknown expression at EOF: upper-case(string(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_RETURN_STATUS')))='S' AND upper-case(string(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_TKT_VALID')bpws:getVariableData('isAuthenticCaller'))) = 'T'..
Please verify the xpath query "upper-case(string(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_RETURN_STATUS')))='S' AND upper-case(string(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_TKT_VALID')bpws:getVariableData('isAuthenticCaller'))) = 'T'" which is defined in BPEL process.
</faultstring><faultactor></faultactor></env:Fault></env:Body></env:Envelope>
Do you think there was a bug in the expression that has surfaced due to some additional validations in 10.1.3.1 or am I missing something here?
Thanks a lot for your help.
Thanks.
RV

AND upper-case(string(bpws:getVariableData('g_InvokeAuthenticateTicketOutput','OutputParameters','/ns13:OutputParameters/X_TKT_VALID')bpws:getVariableData('isAuthenticCaller'))) = 'T'"
what is this bold part about? this looks wrong to me..
/clemens

ORA-31013: Invalid XPATH expression

Hi,
I am getting this error when i am trying to execute a sp which will do xml parsing.
What all i did is i have Oracle database with 9.2.0.1.0 version. The i hav ugraded the database to 9.2.0.6.0 using the Oracle patch. After upgrading the Oracle db to 9.2.0.6.0 i got the below error:
ORA-00600: internal error code,
Then i ran the catpatch.sql to get rid off this error. After running the catpatch.sql the above error gone but i got another error
ORA-31013: Invalid XPATH expression.
What does this mean. The sp is working fine before upgrading the Oracle db to 9.2.0.6.0. Is the patch upgrade corrupted any of the XML libraries or the 9.2.0.6.0 doesn't support the xml parsing or do i need to apply any patch for this.
Please suggest me ASAP since this error has been raised at cusotmer and i am in very much need of this.
The statement which i am using for parsing the xml file is
x.xml_data.extract('/x:recording/@x:ref').getStringVal() from xml_process;
where xml_process is a table of xml_type.
Thanks
Rao

Hello, There,
Recently we have moved some project from 9ir2 to 10gr2, some code which worked fine before but now got error.
any patch needed for this ? did anybody get the same issue before?
here're my environment:
1)9ir2:
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE 9.2.0.8.0 Production
TNS for Solaris: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
2) 10gr2:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
3) below are my test code which works fine in 9ir2 but got problem of "ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in..."
---===================TEST CODE START========================================
var xml_data clob;
begin
:xml_data:='<?xml version="1.0" encoding="UTF-8"?>
<MCCI_MT000100.Message xmlns="urn:hl7-org:v3" xmlns:voc="urn:hl7-org:v3/voc" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<id root="2.16.840.1.113883.4.3.57.100000126" extension="58212040112"/>
<creationTime value="20030620"/>
<versionId>v3r1b3</versionId>

<interactionId root="2.16.840.1.113883.4.3.57.100000126" extension="FICR_IN600201"/>
<processingCode code="P"/>
<processingModeCode code="T"/>

<acceptAckCode code="AL"/>

<applicationAckCode code="AL"/>
<communicationFunctionRcv>
<typeCode code="RCV"/>
<deviceRcv classCode="DEV" determinerCode="INSTANCE">
<id root="2.16.840.1.113883.4.3.57.100000126" extension="111111111"/>
<name use="L">BCE</name>
</deviceRcv>
</communicationFunctionRcv>
<communicationFunctionSnd>
<typeCode code="SND"/>
<deviceSnd>

<id root="2.16.840.1.113883.4.3.57.100000126" extension="100000126"/>
<name use="L">SampleProvider</name>
</deviceSnd>
</communicationFunctionSnd>
<controlActProcess>

<id root="2.16.840.1.113883.4.3.57.100000126" extension="111111112"/>
<effectiveTime value="20030620"/>
<subject>

<invoiceAdjudicationRequest>
<id root="2.16.840.1.113883.4.3.57.100000126" extension="58712040112"/>
<amt currency="CAD" value="200"/>
<reasonOf>

<justifiedInvoiceElementOrder>
<id extension="162" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code="CP"/>

<netAmt currency="CAD" value="200"/>
<component>
<InvoiceElementDetail>
<id extension="162.1" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code="240"/> 
<unitQuantity>
<numerator value="4" unit="h"/>
<denominator value="1" unit="each"/>
</unitQuantity>
<unitPriceAmt>
<numerator value="25" currency="CAD"/>
<denominator value="1" unit="1"/>
</unitPriceAmt>
<netAmt currency="CAD" value="100"/>
<reasonOf>
<justifiedAct>
<billableClinicalService>
<code code="240"/>


<effectiveTime value="20030620"/>
<performer>
<healthCareProvider id ="100000126"/>

</performer>
<location>
<participant>
<COCT_MT240000.ServiceDeliveryLocation>
<code code="12"/>

</COCT_MT240000.ServiceDeliveryLocation>
</participant>
</location>
</billableClinicalService>
</justifiedAct>
</reasonOf>
</InvoiceElementDetail>
</component>
<component>
<InvoiceElementDetail>
<id extension="162.2" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code="240"/> 
<unitQuantity>
<numerator value="4" unit="h"/>
<denominator value="1" unit="each"/>
</unitQuantity>
<unitPriceAmt>
<numerator value="25" currency="CAD"/>
<denominator value="1" unit="1"/>
</unitPriceAmt>
<netAmt currency="CAD" value="100"/>
<reasonOf>
<justifiedAct>
<billableClinicalService>
<code code="240"/>


<effectiveTime value="20030620"/>
<performer>
<healthCareProvider id ="100000126"/>

</performer>
<location>
<participant>
<COCT_MT240000.ServiceDeliveryLocation>
<code code="12"/>

</COCT_MT240000.ServiceDeliveryLocation>
</participant>
</location>
</billableClinicalService>
</justifiedAct>
</reasonOf>
</InvoiceElementDetail>
</component>
<coverage>
<coveringCoverageEvent>
<id extension="1" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code="event"/>
<beneficiary>
<coveredParty>

<id extension="00012345" root="2.16.840.1.113883.4.3.57.100000126"/>
<code code ="spouse"/>
<coveredParty>
<CoveredPartyAsPatientPerson>
<name>
<family>Jackson</family>
<given>Robyn</given>
</name>
<administrativeGenderCode code="F"/>
<birthTime value="19490601" />
<deceasedTime value="20030123" />
<multipleBirthInd value="false" />
<multipleBirthOrderNumber value="1" />
<addr>
<postalCode>L1W3V4</postalCode>
</addr>
</CoveredPartyAsPatientPerson>
</coveredParty>
</coveredParty>
</beneficiary>
<author>
<underwriter>

<id extension="10001" root="2.16.840.1.113883.4.3.57.100000126"/>
</underwriter>
</author>
</coveringCoverageEvent>
</coverage>
</justifiedInvoiceElementOrder>
</reasonOf>
</invoiceAdjudicationRequest>
</subject>
</controlActProcess>
<attentionLine type="AttentionLine" assoc="inboundRelationship">
<keyWordText code="BENEFITGR">Physio</keyWordText>
</attentionLine>
<attentionLine type="AttentionLine" assoc="inboundRelationship">
<keyWordText code="TPID">111111112</keyWordText>
</attentionLine>
</MCCI_MT000100.Message>
end;
select extract(xmltype(:xml_data),'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension','xmlns="urn:hl7-org:v3"').getStringVal() from dual;
--=====================TEST CODE END=======================================
in 9ir2 the result is:
SQL> select extract(xmltype(:xml_data),'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension','xmlns="urn:hl7-org:v3"').getStringVal(
) from dual ;
EXTRACT(XMLTYPE(:XML_DATA),'/MCCI_MT000100.MESSAGE/COMMUNICATIONFUNCTIONSND/DEVI
100000126
but in 10gr2, the error show as below:
SQL>
SQL> select extract(xmltype(:xml_data),'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension','xmlns="urn:hl7-org:v3"').getStringVal(
) from dual ;
select extract(xmltype(:xml_data),'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension','xmlns="urn:hl7-org:v3"').getStringVal() fro
m dual
ERROR at line 1:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in:
'/MCCI_MT000100.Message/communicationFunctionSnd/deviceSnd/id@extension'
thanks in advance!
richard

ORA-31013: Invalid XPATH expression - Oracle9i

Hello, I have to write a secure website call and below is the code snippet. I am getting following error
ORA-31013: Invalid XPATH expression
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at line 104
This is on Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
Code snippet
soap_request :=
'<?xml version="1.0" encoding="utf-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<NewOrder xmlns="urn:ws.xtech.net/xtechGateway">
<newOrderRequest xsi:type="ns1:NewOrderRequestElement" xmlns:ns1="urn:ws.xtech.net/xtechGateway" xmlns="">
<ns1:xConnectionUsername>'
|| 'XXXXXXXX'
|| '</ns1:xConnectionUsername>';
UTL_HTTP.SET_WALLET ( 'file:/devdb/9.2.0/appsutil/wallet', 'password' );
http_req :=
UTL_HTTP.begin_request
('https://wsvar.xtech.net/xtechGateway',
'POST',
'HTTP/1.1'
UTL_HTTP.set_header (http_req, 'Content-Type', 'text/xml');
UTL_HTTP.set_header (http_req, 'Content-Length', LENGTH (soap_request));
utl_http.set_header(http_req, 'SOAPAction', '');
UTL_HTTP.write_text (http_req, soap_request);
http_resp := UTL_HTTP.get_response (http_req);
UTL_HTTP.read_text (http_resp, soap_respond);
UTL_HTTP.end_response (http_resp);
*resp := XMLTYPE.createxml (soap_respond);
resp :=
resp.EXTRACT
('/soap:Envelope/soap:Body/child::node()',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"'
v_resp :=
resp.EXTRACT ('NewOrderResponse/return/text ()', '"approvalStatus"').getstringval
Not sure where Am I doing wrong. Please help
Thanks,
R

Okay, I have removed the "ApprovalStatus" and replaced with the xmlns. Also, based on the description of child:node(), I think, then it is required.
Now I am getting following error
ORA-30625: method dispatch on NULL SELF argument is disallowed
Below is the complete code and underneath code I am providing response XML structure
I can't thank you enough for tracking this post for so long. Thank you so much, I really appreciate your diligence.
Code_
DECLARE
soap_request CLOB;
soap_respond CLOB;
v_resp VARCHAR2 (100);
v_order VARCHAR2 (100);
v_line_number VARCHAR2 (100);
http_req UTL_HTTP.req;
http_resp UTL_HTTP.resp;
resp XMLTYPE;
BEGIN
soap_request :=
'<?xml version="1.0" encoding="utf-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<NewOrder xmlns="urn:ws.xtech.net/xtechGateway">
<newOrderRequest xsi:type="ns1:NewOrderRequestElement" xmlns:ns1="urn:ws.xtech.net/xtechGateway" xmlns="">
<ns1:XConnectionUsername>'
|| 'xxxxxxx'
|| '</ns1:xalConnectionUsername>'
|| '<ns1:xalConnectionPassword>'
|| 'xxxxxxx'
|| '</ns1:xalConnectionPassword>'
|| '<ns1:industryType>'
|| 'EC'
|| '</ns1:industryType>'
|| '<ns1:transType>'
|| 'AC'
|| '</ns1:transType>'
|| '<ns1:bin>'
|| '000002'
|| '</ns1:bin>'
|| '<ns1:merchantID>'
|| 700000208789
|| '</ns1:merchantID>'
|| '<ns1:terminalID>'
|| 001
|| '</ns1:terminalID>'
|| '<ns1:ccAccountNum>'
|| '4x1xxxx11x11x1xx1'
|| '</ns1:ccAccountNum>'
|| '<ns1:ccExp>'
|| '122012'
|| '</ns1:ccExp>'
|| '<ns1:ccCardVerifyPresenceInd>'
|| 2
|| '</ns1:ccCardVerifyPresenceInd>'
|| '<ns1:avsZip>'
|| 'T2H 2K6'
|| '</ns1:avsZip>'
|| '<ns1:avsAddress1>'
|| '112-7015 MACLEOD TRAIL SW'
|| '</ns1:avsAddress1>'
|| '<ns1:avsAddress2>'
|| ''
|| '</ns1:avsAddress2>'
|| '<ns1:avsCity>'
|| 'CALGARY'
|| '</ns1:avsCity>'
|| '<ns1:avsState>'
|| ''
|| '</ns1:avsState>'
|| '<ns1:avsName>'
|| 'Testing'
|| '</ns1:avsName>'
|| '<ns1:avsCountryCode>'
|| 'CA'
|| '</ns1:avsCountryCode>'
|| '<ns1:orderID>'
|| '31103142361483'
|| '</ns1:orderID>'
|| '<ns1:amount>'
|| 100
|| '</ns1:amount>'
|| '<ns1:comments>'
|| 'This is a AE AVSCVV AuthCap'
|| '</ns1:comments>'
|| '</newOrderRequest>'
|| '</NewOrder>'
|| '</soapenv:Body>'
|| '</soapenv:Envelope>';
UTL_HTTP.set_wallet ('file:/a01/oracle/devdb/9.2.0/appsutil/wallet',
'p4ssword'
http_req :=
UTL_HTTP.begin_request
('https://wsvar.xtech.net/xtechGateway',
'POST',
'HTTP/1.1'
UTL_HTTP.set_header (http_req, 'Content-Type', 'text/xml');
UTL_HTTP.set_header (http_req, 'Content-Length', LENGTH (soap_request));
UTL_HTTP.set_header (http_req, 'SOAPAction', 'xmlns="urn:ws.xtech.net/xtechGateway"');
UTL_HTTP.write_text (http_req, soap_request);
http_resp := UTL_HTTP.get_response (http_req);
UTL_HTTP.read_text (http_resp, soap_respond);
UTL_HTTP.end_response (http_resp);
resp := XMLTYPE.createxml (soap_respond);
resp :=
resp.EXTRACT ('/soap:Envelope/soap:Body/child::node()',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"'
v_resp :=trunc(resp.EXTRACT ('/NewOrderResponse/return/text ()','xmlns:ns1="urn:ws.xtech.net/xtechGateway"').getstringval());
DBMS_OUTPUT.put_line ('Response: ' || v_resp);
END;
XML Response Structure_
<xml>
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns="urn:ws.xtech.net/xtechGateway">
<SOAP-ENV:Body id="_0">
<NewOrderResponse xmlns="urn:ws.xtech.net/xtechGateway" xsi:type="ns:NewOrderResponse">
<return xsi:type="ns:NewOrderResponseElement">
<industryType xsi:type="xsd:string">EC</industryType>
<transType xsi:type="xsd:string">AC</transType>
<bin xsi:type="xsd:string">000001</bin>
<merchantID xsi:type="xsd:string">041756</merchantID>
<terminalID xsi:type="xsd:string">001</terminalID>
<cardBrand xsi:type="xsd:string">DI</cardBrand>
<orderID xsi:type="xsd:string">31103142361483</orderID>
<txRefNum xsi:type="xsd:string">41C09DBC1D0710F4635C1156509F3CCF491F545E</txRefNum>
<txRefIdx xsi:type="xsd:string">1</txRefIdx>
<respDateTime xsi:type="xsd:string">20041215152533</respDateTime>
<procStatus xsi:type="xsd:string">0</procStatus>
<approvalStatus xsi:type="xsd:string">1</approvalStatus>
<respCode xsi:type="xsd:string">00</respCode>
<avsRespCode xsi:type="xsd:string">B </avsRespCode>
<cvvRespCode xsi:type="xsd:string">P</cvvRespCode>
<authorizationCode xsi:type="xsd:string">tst993</authorizationCode>
<mcRecurringAdvCode xsi:type="xsd:string"/>
<visaVbVRespCode xsi:type="xsd:string"/>
<procStatusMessage xsi:type="xsd:string">Approved</procStatusMessage>
<hostRespCode xsi:type="xsd:string">100</hostRespCode>
<hostAVSRespCode xsi:type="xsd:string">I3</hostAVSRespCode>
<hostCVVRespCode xsi:type="xsd:string">P</hostCVVRespCode>
<retryAttempCount xsi:type="xsd:string"/>
<lastRetryDate xsi:type="xsd:string"/>
<customerRefNum xsi:type="xsd:string"/>
<customerName xsi:type="xsd:string"/>
<profileProcStatus xsi:type="xsd:string"/>
<profileProcStatusMsg xsi:type="xsd:string"/>
</return>
</NewOrderResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope> </xml>
Edited by: user2913945 on Mar 8, 2010 10:42 AM

BPEL - 10.1.3.3 [Error ORABPEL-10057]: invalid query

Hi,
I am getting the following error when compiling the BPEL Process.
Error(1198):
[Error ORABPEL-10057]: invalid query
[Description]: in line 1198 of "C:\HealdSalesForce\trunk\WebFormsToSalesForce\bpel\WebFormsToSalesForce.bpel", query "/ns2:queryResponse/ns2:result/ns2:records[1]/child::ns1:ConvertedAccountId" is invalid, because step 'ns1:ConvertedAccountId' is not valid..
[Potential fix]: Check the XML schema and make sure your query string is valid.
This is the code segments...
xmlns:ns1="urn:sobject.enterprise.soap.sforce.com"
xmlns:ns3="http://xmlns.oracle.com/SalesForceAuthentication"
xmlns:ns2="urn:enterprise.soap.sforce.com"
<variable name="*_RetrieveDupCandidatesOutput_*"
messageType="ns2:queryResponse"/>
<invoke name="RetrieveDupCandidates" partnerLink="sForce6.0"
portType="ns2:Soap" operation="query"
inputVariable="RetrieveDupCandidatesInput"
outputVariable="*_RetrieveDupCandidatesOutput_*"
bpelx:inputHeaderVariable="sessionHeader"/>
...... ............Errors out here..........
<case condition="string-length(bpws:getVariableData('RetrieveDupCandidatesOutput','parameters','/ns2:queryResponse/ns2:result/ns2:records[1]')/ns1:ConvertedAccountId) > 0">
This code is working in 10.1.2, When upgraded to 10.1.3, it is erroring out.
Any idea why is this erroring out. Is it because of the mixed namespaces in the query path? We are trying to get the first record of the resultset(records) and get the ConvertedAccountId from the first record.
Thank you
Krish
Edited by: knandipati on 2009. 8. 31 오후 5:28
Edited by: knandipati on 2009. 8. 31 오후 5:29

Hi,
I am getting the following error when compiling the BPEL Process.
Error(1198):
[Error ORABPEL-10057]: invalid query
[Description]: in line 1198 of "C:\HealdSalesForce\trunk\WebFormsToSalesForce\bpel\WebFormsToSalesForce.bpel", query "/ns2:queryResponse/ns2:result/ns2:records[1]/child::ns1:ConvertedAccountId" is invalid, because step 'ns1:ConvertedAccountId' is not valid..
[Potential fix]: Check the XML schema and make sure your query string is valid.
This is the code segments...
xmlns:ns1="urn:sobject.enterprise.soap.sforce.com"
xmlns:ns3="http://xmlns.oracle.com/SalesForceAuthentication"
xmlns:ns2="urn:enterprise.soap.sforce.com"
<variable name="*_RetrieveDupCandidatesOutput_*"
messageType="ns2:queryResponse"/>
<invoke name="RetrieveDupCandidates" partnerLink="sForce6.0"
portType="ns2:Soap" operation="query"
inputVariable="RetrieveDupCandidatesInput"
outputVariable="*_RetrieveDupCandidatesOutput_*"
bpelx:inputHeaderVariable="sessionHeader"/>
...... ............Errors out here..........
<case condition="string-length(bpws:getVariableData('RetrieveDupCandidatesOutput','parameters','/ns2:queryResponse/ns2:result/ns2:records[1]')/ns1:ConvertedAccountId) > 0">
This code is working in 10.1.2, When upgraded to 10.1.3, it is erroring out.
Any idea why is this erroring out. Is it because of the mixed namespaces in the query path? We are trying to get the first record of the resultset(records) and get the ConvertedAccountId from the first record.
Thank you
Krish
Edited by: knandipati on 2009. 8. 31 오후 5:28
Edited by: knandipati on 2009. 8. 31 오후 5:29

Invalid Xpath Expression

Hi ,
I have an XML content as below and i am sending that as a string input to other interface . Here i have hard coded Teller ID and account ID , but i want to send the input from payload like this : ><Teller><ID>bpws:getVariableData('TellerId')</ID></Teller> .
But it is giving error as "Invalid xpath expression" . How can the below xml be sent with the teller id and account no. accepting inputs from payload?
ora:getContentAsString('<?xml version="1.0" encoding="utf-8"?><Summit xmlns="http://summit.fiserv.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://summit.fiserv.com /cfg/CommandSchema/sisCommands.xsd"><Spectrum><CommandRq><RequestHeader><Teller><ID>T1P1</ID></Teller><Override>0</Override></RequestHeader><RQMS_RQSTRq><Account>123123</Account><Options>M</Options></RQMS_RQSTRq></CommandRq></Spectrum></Summit>')

The other interface accepts only strings . If i do it using xml fragment , it is embedding white spaces and is not acceptable by the other interface.

Getting Invalid XPath expression

Hi,
I am parsing a XML document and reading a node with <xtags:valueOf .. select="product_name"/>. The value of product_name is :
<product_name>SJE6 2004Q1, 1 RTU ESD, All platforms, 1 Year</product_name> , but I am getting the following exception :
org.dom4j.InvalidXPathException: Invalid XPath expression: SJE6 2004Q1, 1 RTU ESD, All platforms, 1 Year Unexpected '2004'
at org.dom4j.xpath.DefaultXPath.parse(DefaultXPath.java:316)
at org.dom4j.xpath.DefaultXPath.<init>(DefaultXPath.java:63)
at org.dom4j.DocumentFactory.createXPath(DocumentFactory.java:182)
at org.dom4j.DocumentFactory.createXPath(DocumentFactory.java:198)
at org.apache.taglibs.xtags.xpath.AbstractTag.createXPath(AbstractTag.java:195)
at org.apache.taglibs.xtags.xpath.VariableTag.setSelect(VariableTag.java:143)
I tried with <xtags:copyOf select=.../node() and text()/> but still getting the same exception. Not sure why its failing on 2004? Help!
Thanks,
-Ashish

The problem was not in the <xtags:valueOf> but in the following expression :
<xtags:variable id="lName" select="<%= product_name %>"/>
where I wasassigning the value of <product_name> to a String (java) variable defined. But this will be another question : why is <xtags:variable> failing?

JAVA XML DOM4J: Invalid XPath expression

Hi everybody,
I am not sure why I am getting an exception for this expression:
Number count= document.numberValueOf("/NODE/SUBNODE/count(*)");
Exception is:
org.dom4j.InvalidXPathException: Invalid XPath expression:
Thanks regards
Mario

Hello
what about
"count (/NODE/SUBNODE)" as xpath expression
regards franz
reward points if useful

JAVAMapping dom4j: Invalid XPath expression:

Hi ervybody,
I am not sure why I am getting an exception for this expression:
Number count= document.numberValueOf("/NODE/SUBNODE/count(*)");
Exception is:
org.dom4j.InvalidXPathException: Invalid XPath expression:
Thanks regards
Mario

The problem is
You don't have the correct version of jaxen or one of its dependencies on the classpath.
Please update your DOM Parser beta12.
Please visit the link.
http://jira.codehaus.org/browse/JAXEN-175

Error ORABPEL-09903 on deploying my bpel process

the stack
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
at com.collaxa.cube.engine.core.BaseCubeProcess.startAllActivationAgents(BaseCubeProcess.java:354)
at com.collaxa.cube.engine.deployment.DeploymentManager.activateDefaultRevision(DeploymentManager.java:1446)
at com.collaxa.cube.engine.deployment.DeploymentManager.setDefaultRevision(DeploymentManager.java:1405)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:821)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
anybody can help me ?
God bless all

So does anyone know why I m getting the following error when the definition of "GeneralFault" is in the .wsdl file? According to the error messge, it sounds like I have to define it in a .xsd file.
Error ORABPEL-10902: compilation failed
Description: in "bpel.xml", XML parsing failed because "undefined part element.
In WSDL at "file:/D:/projects/MyBPEL/bpel/MySvc-v1.wsdl", message part element "{http://www.company.com/wsdl/MySvc-v1.0}GeneralFault" is not defined in any of the schemas.
Please make sure the spelling of the element QName is correct and the WSDL import is complete
AJ

Invalid XPath ?

I have a process that gets a date (format YYYY-MM-DD; forced by Console), which has to be delivered to a Webservice, that requests dates in format 'dd MMM yyyy' (24 aug 2005).
I've tried the following options (in an Assign):
<copy>
<from variable="inputVariable" part="payload" query="ora:formatDate('/client:bpAanvraagProcessRequest/client:DatumBemonstering', 'dd MMM yyyy')"/>
<to variable="addAanvraag_addaanvraag_InputVariable" part="pDbg"/>
</copy>And:
<copy>
<from variable="inputVariable" part="payload" query="xp20:format-dateTime(/client:bpAanvraagProcessRequest/client:DatumBemonstering,'[dd] [MMM] [YYYY]')"/>
<to variable="addAanvraag_addaanvraag_InputVariable" part="pDbg"/>
</copy>Both fail with the following message:
[Error ORABPEL-10076]: invalid xpath query string
[Description]: in line 68 of "L:\workspaces\BPEL\bpAanvraag\bpAanvraag.bpel", According to BPEL4WS spec 1.1, section 14.3,
the xpath query "ora:formatDate('/client:bpAanvraagProcessRequest/client:DatumBemonstering', 'dd MMM yyyy')" is invalid,
query should be an absolute location path and it must start from the root element prefixed with "/"..
[Potential fix]: Please make sure that your xpath query starts with "/" which is the root..Anyone has any ideas how to fix this?

Okey, found it:
The format-string is an XSLT 2.0 picture string, see syntax explained at http://www.w3.org/TR/xslt20/#date-picture-string
By the way:
a) w3.org publishes the function xslt:format-date(), and format it by picture. This is not offered by Oracle BPEL it seems (at least not through the Expression builder, ver 10.1.2.0.0 ).
Oracle-BPEL offers:
b) ora:formatDate(), and format it by java.text.SimpleDateFormat.
c) xp20:format-dateTime(), and format it by picture.
So I took it away by code like:
<copy>
<from expression="xp20:current-dateTime()"/>
<to variable="myDateTime"/>
</copy>
<copy>
<from expression="'P21D'"/>
<my-xml-comment>The Xpath syntax (like P21D) is for specifying an xdt:dayTimeDuration of 21 days ahead, see http://www.w3.org/TR/xpath-functions/#lexical-dayTimeDuration</my-xml-comment>
<to variable="myDuration"/>
</copy>
<copy>
<from expression="xp20:add-dayTimeDuration-to-dateTime( bpws:getVariableData('myDateTime'), bpws:getVariableData('myDuration') )"/>
<to variable="myResultTime"/>
</copy>
<copy>
<from expression="xp20:format-dateTime( bpws:getVariableData('myResultTime'), '[Y0001][M01][D01]' )"/>
<to variable="myResultTimeNOARK"/>
</copy>

XPATH expression to get Array node

Hi
I have a problem with an XPATH expression in BPEL. I want to get to a particular node in the following result set ..
<return xmlns:ns2="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns3="http://com.quion.taken.services/ITakenService.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns2:Array" ns2:arrayType="ns3:com_quion_dto_taken_BouwnotaVoorraadDTO[2]">
<item xsi:type="ns3:com_quion_dto_taken_BouwnotaVoorraadDTO">
<begunstigde xsi:type="xsd:string">Sjoerd</begunstigde>
<datum xsi:type="xsd:dateTime">2005-10-31T23:00:00.000Z</datum>
<bedrag xsi:type="xsd:string">1000.0</bedrag>
<geldLeningId xsi:type="xsd:string">4.0</geldLeningId>
<rekeningnummer xsi:type="xsd:string">1234</rekeningnummer>
<notaId xsi:type="xsd:string">1.0</notaId>
</item>
<item xsi:type="ns3:com_quion_dto_taken_BouwnotaVoorraadDTO">
<begunstigde xsi:type="xsd:string">Laszlo</begunstigde>
<datum xsi:type="xsd:dateTime">2005-10-31T23:00:00.000Z</datum>
<bedrag xsi:type="xsd:string">1.0</bedrag>
<geldLeningId xsi:type="xsd:string">4.0</geldLeningId>
<rekeningnummer xsi:type="xsd:string">5678</rekeningnummer>
<notaId xsi:type="xsd:string">2.0</notaId>
</item>
</return>
The first thing is that my variable in BPEL does not show the ïtem"level", it shows for example 'return/notaId'.
However I can get to the second node by keying in
EXPRESSION 1:
bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[1]/notaId')
No I want to dynamically determine the particular node instance. I do this as follows [copied from the Array sample]:
EXPRESSION 2:
bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[', bpws:getVariableData('i'),']/notaId')
BPEL throws the following error
assignNotaId (faulted)
[2005/11/09 09:49:36] Updated variable "invokeTaskManager_initiateTask_InputVariable" More...
<invokeTaskManager_initiateTask_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="payload">
<task xmlns="http://services.oracle.com/bpel/task">
<taskId />
<title />
<creationDate />
<creator />
<modifyDate />
<modifier />
<assignee>jstein</assignee>
<status />
<expired />
<expirationDate />
<duration />
<priority />
<template />
<customKey />
<conclusion />
<attachment />
</task>
</part>
</invokeTaskManager_initiateTask_InputVariable>
[2005/11/09 09:49:36] Error in evaluate <from> expression at line "172". The result is empty for the XPath expression : "bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[', bpws:getVariableData('i'),']/notaId')".
[2005/11/09 09:49:36] "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown. less
<selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
<part name="summary">
<summary>empty variable/expression result. xpath variable/expression expression "bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[', bpws:getVariableData('i'),']/notaId')" is empty at line 172, when attempting reading/copying it. Please make sure the variable/expression result "bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[', bpws:getVariableData('i'),']/notaId')" is not empty.</summary>
What is wrong with my expression 2?
Thanks
Jan Willem

This Example works fine for arrays that are part of a WSDL message.
But in 10.1.3.1 this does not work with a array that is part of an XSD declaration
for Example XSD snippet
<xsd:element name="itemList">
          <xsd:complexType>
               <xsd:sequence>
                    <xsd:element maxOccurs="unbounded" minOccurs="1" ref="tns:Item" />
               </xsd:sequence>
          </xsd:complexType>
     </xsd:element>
using the following in assign statement
<copy>
<from expression="concat('/ns9:itemList/ns9:Item[',string(bpws:getVariableData('index')),']')"/>
<to variable="idxXpath"/>
</copy>
<copy>
<from expression="bpws:getVariableData('OutputItemList',bpws:getVariableData('idxXpath'))"/>
<to variable="idx_item"/>
</copy>
gives a compiler error that is
Error(176):
[Error ORABPEL-10085]: invalid argument
[Description]: in line 176 of "D:\OnlineShopping_1\bpel\OnlineShopping.bpel", the second argument "bpws:getVariableData("idxXpath")" for getVariableData is not a literal expression.
[Potential fix]: Please correct the second argument, you might need to escape using single quote or " to make it literal.
Can anyone site the reason for the same or a possible solution?
Message was edited by:
user607972

OAGIS Get XPath Expression

We are using the OAGis schema and a client is sending us data in an expression instead of in the actual schema location using the <Get> portion of the schema.
<Get uniqueIndicator="true">
      <Expression expressionLanguage="XPath">//Credit/FirstName[.="John"]</Expression>
      <Expression expressionLanguage="XPath">//Credit/LastName[.="Smith"]</Expression>
</Get>What is the best way in BPEL to evaluate this xpath expression to set the FirstName to John and LastName to Smith? We are currently using a transform to parse each expression using XSLT into our database schema. It's not very elegant because it uses an if statement to check the path then has to parse out between the quotes then passes the value to the new var/schema.
It seems like there should be a way to evaluate the XPath and set the path to the noted string.
Thanks,

This Example works fine for arrays that are part of a WSDL message.
But in 10.1.3.1 this does not work with a array that is part of an XSD declaration
for Example XSD snippet
<xsd:element name="itemList">
          <xsd:complexType>
               <xsd:sequence>
                    <xsd:element maxOccurs="unbounded" minOccurs="1" ref="tns:Item" />
               </xsd:sequence>
          </xsd:complexType>
     </xsd:element>
using the following in assign statement
<copy>
<from expression="concat('/ns9:itemList/ns9:Item[',string(bpws:getVariableData('index')),']')"/>
<to variable="idxXpath"/>
</copy>
<copy>
<from expression="bpws:getVariableData('OutputItemList',bpws:getVariableData('idxXpath'))"/>
<to variable="idx_item"/>
</copy>
gives a compiler error that is
Error(176):
[Error ORABPEL-10085]: invalid argument
[Description]: in line 176 of "D:\OnlineShopping_1\bpel\OnlineShopping.bpel", the second argument "bpws:getVariableData("idxXpath")" for getVariableData is not a literal expression.
[Potential fix]: Please correct the second argument, you might need to escape using single quote or " to make it literal.
Can anyone site the reason for the same or a possible solution?
Message was edited by:
user607972

[Error ORABPEL - 10900]... : Can not find definition for element 'process'

Hi,
When I try to deploy a bpel process using JDeveloper I'm having the following xml parse error:
Error(21):
[Error ORABPEL-10900]: xml parser error
[Description]: in line 21 of "file:/C:/JDeveloper/jdev/mywork/NERGA/CriarProjectoSA/bpel/CriarProjectoSA.bpel", XML parsing failed because file:/C:/JDeveloper/jdev/mywork/NERGA/CriarProjectoSA/bpel/CriarProjectoSA.bpel<Line 21, Column 63>: XML-24538: (Error) Can not find definition for element 'process'.
[Potential fix]: Fix the invalid XML.
I don't understand why... Any idea?

Ok.
This is my BPEL code. The sapattern tags are from a program that is generating part of the code. The JDeveloper doesn't show any error, I only get the error when I try to deploy.
<?xml version = "1.0" encoding = "UTF-8" ?>
<process name="CriarProjectoSA"
targetNamespace="http://xmlns.oracle.com/CriarProjectoSA"
suppressJoinFailure="no"
xmlns="http://xmlns.oracle.com/CriarProjectoSA"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns4="http://xmlns.oracle.com/CriarProjectoSA"
xmlns:ns7="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns5="http://schemas.oracle.com/xpath/extension"
xmlns:ns6="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:ns11="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:ns9="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ns1="http://xmlns.oracle.com/ValidacaoProjectos"
xmlns:ns3="http://www.nerga.pt" xmlns:ns2="http://tempuri.org/"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:ns10="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns8="http://schemas.xmlsoap.org/ws/2003/03/business-process/">

<sapattern>
<guid>41207640-d934-480f-902a-b3764f3d9c9f</guid>
</sapattern>
<partnerLinks>
<partnerLink name="client" partnerLinkType="ns4:CriarProjectoSA"
myRole="CriarProjectoSAProvider"/>
<partnerLink name="NergaIS" partnerLinkType="ns2:ServiceSoap_PL"
myRole="ServiceSoap_Role" partnerRole="ServiceSoap_Role"/>
<partnerLink name="ValidacaoProjectos"
partnerLinkType="ns1:ValidacaoProjectos"
myRole="ValidacaoProjectosRequester"
partnerRole="ValidacaoProjectosProvider"/>
<sapattern>

<guid>e728e550-f404-47bf-aa13-72429480cbc6</guid>
<guid>3111d1af-0b31-4d02-b3fc-73d14ce95405</guid>
<guid>e9cdca59-888a-4e67-af54-a63ce2347ad3</guid>
</sapattern>
</partnerLinks>
<variables>
<variable name="outputVariable"
messageType="ns4:CriarProjectoSAResponseMessage"/>
<variable name="inputVariable"
messageType="ns4:CriarProjectoSARequestMessage"/>
<sapattern>

<guid>2503e820-3add-4cd1-bbc5-5cc5fff57090</guid>
<guid>8bcc3532-46b7-4e88-816f-72ecdaee76ab</guid>
</sapattern>
<variable name="invocaVP_initiate_InputVariable"
messageType="ns1:ValidacaoProjectosRequestMessage"/>
<variable name="recebeVP_onResult_InputVariable"
messageType="ns1:ValidacaoProjectosResponseMessage"/>
<variable name="InvocaAdicionarProjecto_InputVariable"
messageType="ns2:AdicionarProjectoSoapIn"/>
<variable name="InvocaAdicionarProjecto_OutputVariable"
messageType="ns2:AdicionarProjectoSoapOut"/>
</variables>
<sequence>
<receive name="recebeTemplate" joinCondition="False" partnerLink="client"
portType="ns4:CriarProjectoSA" operation="process"
variable="inputVariable" createInstance="yes">
<sapattern>

<guid>e728e550-f404-47bf-aa13-72429480cbc6</guid>
<guid>68e62379-55ac-48eb-b681-aee8f5a7696d</guid>
</sapattern>
</receive>
<scope variableAccessSerializable="no" name="ValidarExigências"
joinCondition="False">
<faultHandlers>
<catchAll>
<assign name="assignInvalid">
<bpelx:append>
<bpelx:from expression="concat(ns8:getVariableData('inputVariable','payload','/ns3:Template/ns3:Projecto/ns3:Observacoes'), string('Projecto inválido!!'))"/>
<bpelx:to variable="inputVariable" part="payload"
query="/ns3:Template/ns3:Projecto/ns3:Observacoes"/>
</bpelx:append>
</assign>
</catchAll>
</faultHandlers>
<sapattern>

<guid>2e56af66-6622-43e0-9adc-6d5f109cf374</guid>
</sapattern>
<sequence name="ValidarExigências" joinCondition="False">
<assign name="assignVPIn">
<copy>
<from variable="inputVariable" part="payload"/>
<to variable="invocaVP_initiate_InputVariable" part="payload"/>
</copy>
</assign>
<sapattern>

<guid>2e56af66-6622-43e0-9adc-6d5f109cf374</guid>
</sapattern>
<invoke name="invocaVP" joinCondition="False"
partnerLink="ValidacaoProjectos" portType="ns1:ValidacaoProjectos"
operation="initiate"
inputVariable="invocaVP_initiate_InputVariable">
<sapattern>

<guid>f3bc9c04-f4d2-4e96-acc8-7a6c88a8ced5</guid>
</sapattern>
</invoke>
<receive name="recebeVP" joinCondition="False"
partnerLink="ValidacaoProjectos"
portType="ns1:ValidacaoProjectosCallback" operation="onResult"
createInstance="no" variable="recebeVP_onResult_InputVariable">
<sapattern>

<guid>e9cdca59-888a-4e67-af54-a63ce2347ad3</guid>
<guid>1eba96a8-330a-4e4d-a14b-cdf6641fa614</guid>
</sapattern>
</receive>
<assign name="assignVPOut">
<copy>
<from variable="recebeVP_onResult_InputVariable" part="payload"/>
<to variable="inputVariable" part="payload"/>
</copy>
</assign>
</sequence>
</scope>
<scope variableAccessSerializable="no" name="AdicionarProjecto"
joinCondition="False">
<sapattern>

<guid>89c02eae-7788-4892-a616-e46b65ef1b50</guid>
</sapattern>
<sequence name="InvocarISAdicionarProjecto" joinCondition="False">
<assign name="assignIS">
<copy>
<from variable="inputVariable" part="payload"
query="/ns3:Template/ns3:Projecto/ns3:NomeProjecto"/>
<to variable="InvocaAdicionarProjecto_InputVariable" part="parameters"
query="/ns2:AdicionarProjecto/ns2:nome"/>
</copy>
<copy>
<from variable="inputVariable" part="payload"
query="/ns3:Template/ns3:Projecto/ns3:TipoProjecto"/>
<to variable="InvocaAdicionarProjecto_InputVariable" part="parameters"
query="/ns2:AdicionarProjecto/ns2:tipo"/>
</copy>
</assign>
<sapattern>

<guid>89c02eae-7788-4892-a616-e46b65ef1b50</guid>
</sapattern>
<invoke name="InvocaAdicionarProjecto" joinCondition="False"
partnerLink="NergaIS" portType="ns2:ServiceSoap"
operation="AdicionarProjecto"
inputVariable="InvocaAdicionarProjecto_InputVariable"
outputVariable="InvocaAdicionarProjecto_OutputVariable">
<sapattern>

<guid>76519bd3-c506-4c79-8190-8ff09abdd27d</guid>
</sapattern>
</invoke>
</sequence>
</scope>
<assign name="assignOutput">
<copy>
<from variable="inputVariable" part="payload"
query="/ns3:Template/ns3:Projecto"/>
<to variable="outputVariable" part="payload"/>
</copy>
</assign>
<reply name="devolveProjecto" joinCondition="False" partnerLink="client"
portType="ns4:CriarProjectoSA" operation="process"
variable="outputVariable">
<sapattern>

<guid>e728e550-f404-47bf-aa13-72429480cbc6</guid>
<guid>0dbefef0-3d04-4356-abbc-b291ea40d256</guid>
</sapattern>
</reply>
</sequence>
</process>

[Error ORABPEL-10039]: invalid xpath expression - array processing

Similar Messages

Maybe you are looking for