Error processing request ORACLE-01403:no data found

We surmounted the blank page issue by applying the patch to APEX 4.2.2.
Now we patched/upgraded to APEX 4.2.3, and no longer have the blank page issue, but have this one that seems similar:
I am trying here, since I am not getting any debug messages - the POST goes in and immediately comes back with the no data found error.
APEX 4.2.3
APEX Listener 2.0.2
Glassfish 4.0
Apps install OK, and can display the Login page (Show), but when trying to Login (Accept),
immediately get this error:
Error Error processing request
ORA-010403: no data found
Debug messages only shows Show entries - nothing , not even the Accept first line.
Firebug shows similar - upon Post (which looks OK) the immediate response is the error page and message.
I do not have access to the APEX Listener logs tonight, but expect to get to them, or have someone check them
out, tomorrow AM.
Any thoughts or suggestions?
This happens across all apps (15) except for one. Am still trying to discern the different in that app vs the others.
Thank you -

An update:
I have verified that some apps work, and some apps show the
Error Error processing request
        ORA-01403: no data found
error.
Happens across different workspaces.
Have confirmed that for an app that has the error,
   I get the error using the APEX Listener deployment.
   I do NOT get the error using the HTTP server deployment.
This is the same in a Linux environment and in a Windows environment.
For one app, I have an earlier version that gives the error, a later version (new app #) that does not give the error.
APEX 4.2.3
APEX Listener 2.0.3.221.10/3
Glassfish 4.0
Again even at Debug Level 9, I get no debug entries for the POST
For an app that gives the error, the APEX Listener log entries are (from the POST):
==== Processing Request: ====
Attempting to process with PL/SQL Gateway
user-agent: Mozilla/5.0 (Windows NT 5.1; rv:23.0) Gecko/20100101 Firefox/23.0
host: qdcls1534:8082
Applied database connection info
POST /apex/apexd2/wwv_flow.accept
==== Headers in Request ====
==== Cookies in Request ====
content-length: 412
content-type: application/x-www-form-urlencoded;charset=UTF-8
request parameter: p_flow_id=440
request parameter: p_flow_id=440
request parameter: p_flow_step_id=101
request parameter: p_instance=1712832201985
request parameter: p_instance=1712832201985
request parameter: p_page_submission_id=8493461183923
request parameter: p_page_submission_id=35145982114211
request parameter: p_request=LOGIN
request parameter: p_request=
request parameter: p_debug=LEVEL9
request parameter: p_debug=LEVEL9
request parameter: p_arg_names=13616030313099104709
request parameter: p_arg_names=13616030522289104711
request parameter: p_t01=karen.x.cannell
request parameter: p_t02=sssssssss
request parameter: p_md5_checksum=
request parameter: p_page_checksum=C2302553B43577579FF77585749CA016
Using Procedure:wwv_flow.accept
request parameter: p_flow_step_id=101
Requesting Pool:apexd2
pool exists: apexd2
isValidRequest(), procedure name: <wwv_flow.accept>
Validating: wwv_flow.accept
*** Total number of arguments: 510
SID: 214
*** Total number of arguments: 510
begin
wwv_flow.accept(p_flow_step_id=>?,
p_md5_checksum=>?,
p_arg_names=>?,
p_page_checksum=>?,
p_t02=>?,
p_t01=>?,
p_debug=>?,
p_request=>?,
p_page_submission_id=>?,
p_flow_id=>?,
p_instance=>?);
commit;
end;"
Parse: 0 ms
p_flow_step_id= null
p_flow_step_id=[101, 101]
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_request=[LOGIN, ]
p_md5_checksum=
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_arg_names=[13616030313099104709, 13616030522289104711]
p_arg_names: {13616030313099104709, 13616030522289104711}
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_instance= null
p_instance=[1712832201985, 1712832201985]
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_flow_id= null
p_flow_id=[440, 440]
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_page_submission_id= null
p_page_submission_id=[8493461183923, 35145982114211]
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_request= null
p_md5_checksum=
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_debug= null
p_debug=[LEVEL9, LEVEL9]
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_t01= karen.x.cannell
p_t01=karen.x.cannell
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_t02= sssssssss
p_t02=sssssssss
{p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
p_page_checksum= C2302553B43577579FF77585749CA016
p_page_checksum=C2302553B43577579FF77585749CA016
Exec: 37 ms
==== Headers from Results ====
Setting Content-Type (Content-type): text/html; charset=UTF-8
Got results length: 307
Processed PL/SQL Gateway request
==== Request Processed ====
It just stops ...
Any ideas?
I have tried all of the Compatibility settings, no difference.
If it is something I can change in the app, that would be great.
The app that does not work was imported from an APEX 4.1 instance.
The app that does work was imported from an APEX 4..3 instance (Windows, APEX 4.2.3, APEX Listener 2.0.3, recently upgraded from APEX 4.2.2 and APEX Listener 2.0.2).
Any help or suggestions will be greatly appreciated,
Karen

Similar Messages

Error processing request ORACLE-01403:no data found (pt.2)

Hi, all.
We've experienced the problem that seems to be resolved in topic
Error processing request ORACLE-01403:no data found
I followed the lead but didn't found problem they were talking about - no two #FORM_OPEN# directive in page template.
We have Apex 4.2.2.00.11 patchset installed
I cannot tell Apex Listner version for now because our sysadmin who installed it is absent
And problem appears in different versions of Internet Expolrer, but application is working fine in Firefox

Hi, all.
We've experienced the problem that seems to be resolved in topic
Error processing request ORACLE-01403:no data found
I followed the lead but didn't found problem they were talking about - no two #FORM_OPEN# directive in page template.
We have Apex 4.2.2.00.11 patchset installed
I cannot tell Apex Listner version for now because our sysadmin who installed it is absent
And problem appears in different versions of Internet Expolrer, but application is working fine in Firefox

REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found

Hi guys,
I am getting error 'REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found ' when run the report
and i m also use formula column in my report.
can any body help me why it's coming.
following code is used in formula column plz check and verify:
function CF_3Formula return Char is
T1 VARCHAR2(100);
begin
SELECT
     VAT_REG_NO INTO T1
FROM
     JA_IN_HR_ORGANIZATION_UNITS JIHOU,
     HR_LOCATIONS HL--,
     --MTL_TXN_REQUEST_HEADERS MTLH
WHERE
JIHOU.ORGANIZATION_ID=HL.INVENTORY_ORGANIZATION_ID AND
JIHOU.LOCATION_ID=HL.LOCATION_ID AND
--Jihou.ORGANIZATION_ID = Mtlh.Organization_Id AND
-- Hl.INVENTORY_ORGANIZATION_ID =Mtlh.Organization_Id AND
-- MTLH.ATTRIBUTE10=SUBSTR(HL.LOCATION_CODE,1,3) AND
SUBSTR(HL.LOCATION_CODE,1,3)= :TO_ORG1 ;
RETURN (T1);
end;
plz help me out.

Hi;
What is EBS version? Is it custom report or not?
See below which is mention similar errors
Autoinvoice Error: ORA-1403: no data found [ID 1209403.1]
APXIIMPT - Payable Open Interface Import Fails on "REP-1401: 'cf_source_nameformula': Fatal PL/SQL error occurred. ORA-01403: no data found" [ID 222058.1]
Regard
Helios

Getting Error - CREATE_CASH : ORA-01403: no data found

When i use api AR_RECEIPT_API_PUB.CREATE_CASH in loop then i get error 'CREATE_CASH : ORA-01403: no data found' for second record.
AR_RECEIPT_API_PUB.CREATE_CASH(p_api_version => 1.0
,p_init_msg_list => fnd_api.g_true
,p_commit => fnd_api.g_true
,p_receipt_number => i_receipt_number
,p_receipt_date => TRUNC(SYSDATE)
,p_gl_date => TRUNC(SYSDATE)
,p_amount => i_receipt_amount
,p_currency_code => g_currency_code
,p_receipt_method_id => i_receipt_method_id
,p_customer_id => i_customer_id
,p_cr_id => l_cr_id
,p_org_id => i_org_id
,x_return_status => l_return_status
,x_msg_count => l_msg_count
,x_msg_data => l_msg_data
I run it for different org. First org it's running fine but for second it's fail -
Here is output -
Start, Org ID - 84
l_receipt_number - 43164
l_receipt_amount - 74.55
g_currency_code - USD
l_receipt_method_id - 4000
l_customer_id - 7040
l_cr_id -
l_return_status -
l_msg_count -
l_msg_data -
Status - S
Start, Org ID - 81
l_receipt_number - 43166
l_receipt_amount - 30
g_currency_code - USD
l_receipt_method_id - 4000
l_customer_id - 7047
l_cr_id -
l_return_status -
l_msg_count -
l_msg_data -
Error count/msg - 2-
Error msg - CREATE_CASH : ORA-01403: no data found
Error msg - ORA-01403: no data found in Package AR_RECEIPT_API_PUB Procedure Create_cash
PLease help it's urgent

Here is code which i am using...
IF l_ar_pay_rec > 0 THEN
l_receipt_number := ar_cash_receipts_s.NEXTVAL;
FOR r_ar_org_records IN cr_ar_org_records
LOOP
IF r_ar_org_records.org_id = 81 THEN
l_resp_id := 50677;
ELSE
l_resp_id := 50681;
END IF;
MO_GLOBAL.INIT('AR');
MO_GLOBAL.SET_POLICY_CONTEXT('S',r_ar_org_records.org_id);
FND_GLOBAL.APPS_INITIALIZE(g_user_id,l_resp_id,l_appl_id,0);
DBMS_OUTPUT.PUT_LINE('User,Resp,App,Org - '||g_user_id||','||l_resp_id||','||l_appl_id||','||r_ar_org_records.org_id);
-- Derive Receipt Method ID
BEGIN
SELECT receipt_method_id
INTO l_receipt_method_id
FROM ar_receipt_methods
WHERE name = g_receipt_method;
EXCEPTION
WHEN OTHERS THEN
g_ar_error := 'Y';
g_ar_error_msg := g_ar_error_msg||'Receipet Method Not Found, ';
FND_FILE.PUT_LINE(FND_FILE.LOG,'Error While Derive Receipt Method ID');
END;
-- Derive Customer ID
BEGIN
SELECT customer_id
,SUM(AMOUNT_PAID)
INTO l_customer_id
,l_receipt_amount
FROM xxar_third_party_validation
WHERE raf_code = i_raf
AND receipt_date = i_date_paid
AND org_id = r_ar_org_records.org_id
AND customer_id is not null
GROUP BY customer_id;
EXCEPTION
WHEN OTHERS THEN
g_ar_error := 'Y';
g_ar_error_msg := g_ar_error_msg||' Customer ID Not Found, ';
FND_FILE.PUT_LINE(FND_FILE.LOG,'Error While Customer ID');
END;
fnd_msg_pub.initialize;
l_return_status := NULL;
l_msg_count := NULL;
l_msg_data := NULL;
l_cr_id := NULL;
g_currency_code := 'USD';
DBMS_OUTPUT.PUT_LINE('Start, Org ID - '||r_ar_org_records.org_id);
-- Create Cash for Customer
DBMS_OUTPUT.PUT_LINE('l_receipt_number - '||l_receipt_number);
DBMS_OUTPUT.PUT_LINE('l_receipt_amount - '||l_receipt_amount);
DBMS_OUTPUT.PUT_LINE('g_currency_code - '||g_currency_code);
DBMS_OUTPUT.PUT_LINE('l_receipt_method_id - '||l_receipt_method_id);
DBMS_OUTPUT.PUT_LINE('l_customer_id - '||l_customer_id);
DBMS_OUTPUT.PUT_LINE('l_cr_id - '||l_cr_id);
DBMS_OUTPUT.PUT_LINE('l_return_status - '||l_return_status);
DBMS_OUTPUT.PUT_LINE('l_msg_count - '||l_msg_count);
DBMS_OUTPUT.PUT_LINE('l_msg_data - '||l_msg_data);
AR_RECEIPT_API_PUB.CREATE_CASH(p_api_version => 1.0
,p_init_msg_list => fnd_api.g_true
,p_receipt_number => l_receipt_number
,p_receipt_date => TRUNC(SYSDATE)
,p_gl_date => TRUNC(SYSDATE)
,p_amount => l_receipt_amount
,p_currency_code => g_currency_code
,p_receipt_method_id => l_receipt_method_id
,p_customer_id => l_customer_id
,p_cr_id => l_cr_id
,p_org_id => r_ar_org_records.org_id
,x_return_status => l_return_status
,x_msg_count => l_msg_count
,x_msg_data => l_msg_data
DBMS_OUTPUT.PUT_LINE('Status - '||l_return_status);
IF l_return_status <> 'S' THEN
g_ar_error := 'Y';
DBMS_OUTPUT.PUT_LINE('Error count/msg - '||l_msg_count||'-'||l_msg_data);
IF l_msg_count = 1 THEN
g_ar_error_msg := g_ar_error_msg||l_msg_data;
DBMS_OUTPUT.PUT_LINE('Error msg - '||l_msg_data);
ELSIF l_msg_count > 1 THEN
LOOP
l_msg_data := fnd_msg_pub.get (fnd_msg_pub.g_next
,fnd_api.g_false);
IF l_msg_data IS NULL THEN
EXIT;
END IF;
g_ar_error_msg := g_ar_error_msg||l_msg_data;
DBMS_OUTPUT.PUT_LINE('Error msg - '||l_msg_data);
END LOOP;
END IF;
xxar_log_error(r_ar_org_records.record_id,SUBSTR(g_ar_error_msg,1,120));
ELSE
DBMS_OUTPUT.PUT_LINE('Status - '||l_return_status);
FOR r_ar_records IN cr_ar_records(r_ar_org_records.org_id)
LOOP
fnd_msg_pub.initialize;
l_return_status := NULL;
l_msg_count := NULL;
l_msg_data := NULL;
l_cr_id := NULL;
l_receipt_amount := r_ar_records.amount_paid;
l_trx_number := r_ar_records.transaction_number;
g_currency_code := r_ar_records.currency_code;
l_receipt_date := SYSDATE;
l_gl_date := SYSDATE;
-- Apply payments for the RAF and Date Paid
AR_RECEIPT_API_PUB.APPLY(p_api_version => 1.0
,p_init_msg_list => fnd_api.g_true
,p_commit => fnd_api.g_false
,x_return_status => l_return_status
,x_msg_count => l_msg_count
,x_msg_data => l_msg_data
,p_receipt_number => l_receipt_number
,p_trx_number => l_trx_number
,p_amount_applied => l_receipt_amount
,p_org_id => r_ar_org_records.org_id
IF l_return_status <> 'S' THEN
g_ar_error := 'Y';
IF l_msg_count = 1 THEN
g_ar_error_msg := g_ar_error_msg||l_msg_data;
ELSIF l_msg_count > 1 THEN
LOOP
l_msg_data := fnd_msg_pub.get (fnd_msg_pub.g_next
,fnd_api.g_false);
IF l_msg_data IS NULL THEN
EXIT;
END IF;
g_ar_error_msg := g_ar_error_msg||l_msg_data;
END LOOP;
END IF;
xxar_log_error(r_ar_records.record_id,SUBSTR(g_ar_error_msg,1,240));
ELSE
DBMS_OUTPUT.PUT_LINE('Sucess 2 - ');
NULL;
/* -- Call Adjustment API for Contractual Allowance
IF NVL(r_ar_records.contractual_allowance_amt,0) > 0 THEN
xxar_third_party_rcpt_adj(r_ar_records.record_id
,r_ar_records.transaction_number
,r_ar_records.contractual_allowance_amt
,i_user_id
END IF; */
END IF;
END LOOP;
END IF;
DBMS_OUTPUT.PUT_LINE('Error Flag AR - '||g_ar_error);
IF g_ar_error = 'Y' THEN
xxar_log_error(r_ar_org_records.record_id,SUBSTR(g_ar_error_msg,1,240));
END IF;
END LOOP;

Problem with new DB app, report+form, report works great, form says ORA-01403: no data found

I have a new table, the PK is a varchar2(5) column, when I allow the default query in the report to do its work, I get all the expected data. when I click on the edit icon (pencil), I get an error screen indicating ORA-01403: no data found. I'm hosed! This was generated by the app! no changes were made to anything in the app, except to turn off tabs at create time. I even left the default name.
My ARF is hitting the right table with the PK column, but finds nothing. I have the "success" message showing me the PK value. What could be going on here, and how can it be addressed? Today is the 1st time I have seen this matter.
I'm running 4.22 as the workspace admin, I have other apps that work fine (to expectation), my browser is FF22, though I plan a downgrade to 18. Our DB is 11.1.0.7.

Jorge, thanks for your attention to my problem, I appreciate any insights, although there is a little clarification I can offer. Also, if you can, please remind me the tags to use in my text that would properly set off the code snippets or prior message content?
[you wrote]
You said you have a "success" message showing you the PK value. Can you elaborate on this?
The form page, under the ARF, allows for the display of a "success" message and a "failure" message. I have seen my "success" message appear, but it didn't show my key field as a brought-back value (which I told it to include), and I think now this is not relevant any longer. I found that there was a link on the report attributes page between #ROWID# and a P2_ROWID that was incorrect (probably from an earlier stage of dev in the app), and I changed this to my key field, and this altered the outcome of the ARF action. This leads to ....
[you wrote]
Can you see the correct PK value in the URL? Does the item parameter match what you expect (correct page item and value)? Perhaps share that full URL here?
I have expected values in my URL. The URL does show my key value (tail end of URL underlined here):
../apex/f?p=120:2:7519563874482::NO::P2_VCODE:RB15
[you wrote]
Debug the page and see which process, item or step is actually failing. You could be running some other process on the form page and that could be what actually fails. Treat it as if the ARF works correctly and see what else could be happening.
I can add the detail that my 1st message was based on testing with a table where I set the PK as data type VARCHAR2, but in more testing on the actual app (whose URL piece is above) I am using a PK which is CHAR.
The result of the debug effort is that APEX has built its own query for pulling back the row in the ARF, and it is joining on my PK field to an APEX item P_ROWID which I don't think I created. Nor does it appear to offer me any avenue for correcting it. debug snippet: where "VCODE" = :p_rowid; end;

Getting - ORA-01403: no data found - When I Run expdp

Oracle database version 11.1.0.7.0 on Windows 32-bit.
When I run:
expdp system schemas=vms dumpfile=data_pump_dir:vms_bjw%u.dmp logfile=data_pump_dir:vms_bjw.log parallel=2
Connected to: Oracle Database 11g Enterprise Edition Release *11.1.0.7.0* - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-31626: job does not exist
ORA-31637: cannot create job SYS_EXPORT_SCHEMA_01 for user SYSTEM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 736
ORA-39080: failed to create queues "" and "" for Data Pump job
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPC$QUE_INT", line 1665
ORA-01403: no data found
I turned on tracing like this:
1.) Set the Error Stack 1403 to know exactly which SQL is failing:-
SQL> alter system set events '1403 trace name errorstack level 3';
Re-ran the datapump export to reproduce the error then disable the events.
SQL> alter system set events '1403 trace name errorstack off';
The trace file, oddly enough, shows that this is the failing SQL:
Error Stack Dump
ORA-01403: no data found
Current SQL Statement for this session (sql_id=3n58uzvnuw2hj) -----
SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER = 'NLS_CHARACTERSET'
Under that, I get the call stack.
I ran this SQL manually and I get:
SQL> SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER = 'NLS_CHARACTERSET';
VALUE
AL32UTF8
Any ideas as to why I'm getting the ORA-01403 when I run expdp?
Thank you

Hello,
Your error looks like what is descibed into the Metalink Note 345198.1.
But this note apply to 10.1.0.4 not to 11.1.0.7.
So, you should open an issue to My Oracle Support.
Best regards,
Jean-Valentin

ORA-01403 - No Data Found - Error processing validation

Dear all
I hope to find a solution for this error.
ORA-01403 - No Data Found - Error processing validation
Best Regards

Dear Patrick,
Thank you for your response.
I solved or worked around the problem by adding exception handling lines to the end of all PL/SQL validation functions used in this page
For example, if a function used in equation, it is not allowed to return null so I made it return 0 in case of exceptions (as in below code)
-- NO_DATA_FOUND is ORA-01403
EXCEPTION
WHEN NO_DATA_FOUND THEN return(0);
Sincerely Yours
Mahmoud Rabie

ORA-01403: no data found Error in PLSQL code raised during plug-in processing.

Hello OTN community,
We are having the access to APEX problem. a New user was setup to access the APEX application. When I test to login as a new user, I get the message "ORA-01403: no data found Error in PLSQL code raised during plug-in processing.". When click OK to the disply message, the application will take me out of the sstem. I need help to even understand what is happening. I didn't develop the application, there is no documentation for this application, I am just supporting the application whenever there is a problem and I am new to APEX. As you can see I need help to figure this thing out. Your help is dearly appreciated.
Thank you OTN

Try to check the query that is executed and check if there is data or not

Oracle error 1403:java.sql.SQLException: ORA-01403: no data found ORA-06512

My customer has an issue, and error message as below:
<PRE>Oracle error 1403: java.sql.SQLException: ORA-01403: no data found ORA-06512:
at line 1 has been detected in FND_SESSION_MANAGEMENT.CHECK_SESSION. Your
session is no longer valid.</PRE>
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
And customer’s statement is: Upgrade from EBS 11.5.10 to 12.1.3. Login the EBS, open any forms and put it in idle. Then refresh the form, error happens
Then, I checked ISP, and found two notes:
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid (Doc ID 1284094.1)
Note 1319380.1: Webadi Gl Journal Posting Errors After Atg R12.1.3 (Doc ID 1319380.1)
But these two notes are both WebADI.
Following is the data collection from customer:
1. Run UNIX command to check .class file version:
strings $JAVA_TOP/oracle/apps/bne/utilities/BneViewerUtils.class | grep Header--> S$Header: BneViewerUtils.java 120.33.12010000.17 2010/11/21 22:19:58 amgonzal s$
2. Run SQL to check you patch level:
SELECT * FROM fnd_product_installations WHERE patch_level LIKE '%BNE%';--> R12.BNE.B.3
3. Run SQL to check patch '9940148' applied or not:
SELECT * FROM ad_bugs ad WHERE ad.bug_number = '9940148';--> No Rows returned
4. Run SQL to check patch '9785477' applied or not:
SELECT * FROM ad_bugs WHERE bug_number in ('9785477');-->
BUG_ID APPLICATION_SHORT_NAME BUG_NUMBER CREATION_DATE ARU_RELEASE_NAME CREATED_BY LAST_UPDATE_DATE LAST_UPDATED_BY TRACKABLE_ENTITY_ABBR BASELINE_NAME GENERIC_PATCH LANGUAGE
576982 11839583 2011/8/7 上午 08:20:36 R12 5 2011/8/7 上午 08:20:36 5 pjt B n US
516492 9785477 2011/6/12 上午 11:42:45 R12 5 2011/6/12 上午 11:42:45 5 bne B n US
546109 9785477 2011/6/12 下午 01:17:41 R12 5 2011/6/12 下午 01:17:41 5 bne B n ZHT
5. Run SQL to check the status of object ‘FND_SESSION_MANAGEMENT’
SELECT * FROM dba_objects do WHERE do.object_name = 'FND_SESSION_MANAGEMENT';-->
OWNER OBJECT_NAME SUBOBJECT_NAME OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS TEMPORARY GENERATED SECONDARY NAMESPACE EDITION_NAME
APPS FND_SESSION_MANAGEMENT 219425 PACKAGE 2004/10/30 下午 01:52:35 2011/8/7 上午 08:18:39 2011-08-07:08:18:26 VALID N N N 1
APPS FND_SESSION_MANAGEMENT 226815 PACKAGE BODY 2004/10/31 上午 01:05:40 2011/8/7 上午 08:18:54 2011-08-07:08:18:27 VALID N N N 2
So, my question is: Customer’s BneViewerUtils.java version is already 120.33.12010000.17, which greater than 120.33.12010000.14. Is there any others solutions for this issue? Does customer still need to apply patch '9940148' based on action plan of
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid?
Customer's EBS version is 12.1.3; OS is HP-UX PA-RISC (64-bit); DB is 11.2.0.2.
Thanks,
Jackie

And customer’s statement is: Upgrade from EBS 11.5.10 to 12.1.3. Login the EBS, open any forms and put it in idle. Then refresh the form, error happens
Idle for how long? Is the issue with all sessions?
Please see these docs/links
User Sessions Get Timed Out Before Idle Time Parameter Values Are Reached [ID 1306678.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Timeout+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Then, I checked ISP, and found two notes:
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid (Doc ID 1284094.1)
Note 1319380.1: Webadi Gl Journal Posting Errors After Atg R12.1.3 (Doc ID 1319380.1)
But these two notes are both WebADI.Can you find any details about the error in Apache log files and in the application.log file?
Any errors in the database log file?
So, my question is: Customer’s BneViewerUtils.java version is already 120.33.12010000.17, which greater than 120.33.12010000.14. Is there any others solutions for this issue? No.
Does customer still need to apply patch '9940148' based on action plan ofIf the issue not with Web ADI, then ignore this patch. However, if you use Web ADI you could query AD_BUGS table and verify if you have the patch applied.
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid?
Customer's EBS version is 12.1.3; OS is HP-UX PA-RISC (64-bit); DB is 11.2.0.2.If you could not find any details in the logs, please enable debug as per (R12, 12.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN [ID 422419.1]).
Thanks,
Hussein

OCI Error ORA-01403: no data found in oracle goldengate replication after tts instaniation

I recently migrated our tg core system from sun solaris(11.1.0.7) to linux (11.2.0.3) environment using goldengate method (transportable tablespace method used for instantiation).
The initial replication worked with HANDLECOLLISIONS and after I monitor the lag finished, I took Handlecollisions off and noticed discarded report with OCI Error ORA-01403: no data found in two replications.
I followed every step in the tts migration steps provided by oracle best practice.
Can anybody provide any clue how do I fix this issue?
Thank you in advance.

extract and replicat are on schema level.
DO I have to do anything for replication on schema level?
Basic trandata logging enabled on source.

APEX 5 Bug? Change Col order ends in Error processing update. ORA-01403: no data found

Hi ,
i have successfully migrated my 5 apps to apex 5 yeah. Wow, Migration was complted in 15 mins !
But now i have Problem: I have a classic report and want to chage the column order.
But i always get a
Error processing update.
ORA-01403: no data found
Any Workarounds ?
Thanks
Marco

Hi Patrick,
the Copy App crashes with
ORA-06550: line 79, column 18: PLS-00103: Encountered the symbol "WHERE" when expecting one of the following: ) , * & = - + < / > at in is mod remainder not rem => <an exponent (**)> <> or != or ~= >= <= <> and or like like2 like4 likec between || multiset member submultiset
Execution of the statement was unsuccessful. ORA-06550: line 79, column 18: PLS-00103: Encountered the symbol "WHERE" when expecting one of the following: ) , * & = - + < / > at in is mod remainder not rem => <an exponent (**)> <> or != or ~= >= <= <> and or like like2 like4 likec between || multiset member submultiset
begin wwv_flow_api.create_list_of_values( p_id=>wwv_flow_api.id(23215926281374548)
Thanks for help !
Marco

ORA-01403: no data found BPEL Error on DB Adapter

Dear All,
I am using a DBAdapter to call a Stored Procedure in a Package. One of the parameter of the stored procedure is of table type. While invoking the BPEL Process, it shows the following error:
Fault Error.com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{code=<code>1403</code> ,summary=<summary>file:/u03/soauser/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_InventoryProduct_1.0_579640da6283d0dbd00cca17cf50e0f7.tmp/InvProductDBService.wsdl [ InvProductDBService_ptt::InvProductDBService(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'InvProductDBService' failed due to: Error while converting to a Java struct object. Unable to convert the XSD element P_ITEM_TBL_ITEM whose user defined type is APPS.XXHDNL_INV_MTL_SYSITEMS_PKG_2. Cause: java.sql.SQLException: ORA-01403: no data found ORA-06512: at line 1 [Caused by: ORA-01403: no data found ORA-06512: at line 1 ] ; nested exception is: ORABPEL-11802 Error while converting to a Java struct object. Unable to convert the XSD element P_ITEM_TBL_ITEM whose user defined type is APPS.XXHDNL_INV_MTL_SYSITEMS_PKG_2. Cause: java.sql.SQLException: ORA-01403: no data found ORA-06512: at line 1 [Caused by: ORA-01403: no data found ORA-06512: at line 1 ] Check to ensure that the XML data describing the user defined type matches the definition of the struct in the XSD. Contact oracle support if error is not fixable. </summary> ,detail=<detail> Internal Exception: java.sql.SQLException: ORA-01403: no data found ORA-06512: at line 1 Error Code: 1403</detail> }} </ErrorDescription>
What could be the possible solution for this to get fixed. Please update..
Many thanks in advance....

This is a PL/SQL error, it occurs when a cursor (SQL statement) is called and returned no values, typically you should have an exception handler in the PL/SQL to mange this. But sometimes you want the PL/SQL to fail.
The parameters you are using to invoke the PL/SQL procedure returned no values, therefore to fix provide information that does return values, or in the PL/SQL put an exception handler in to manage the no-data-found error, e.g.
begin
Select ...
Into ..
From ..
Where ..
Exception
when no_data_found then
end;cheers
James

Misterious "ORA-01403: no data found" error

Hi,
I've been searching through the forum and the Internet with no results, so I'm posting here hoping you can help me.
Here is the situation: I had a page 30 with a tree branching to a form on a view.This worked fine until one day that suddenly, we got the "ORA-01403: no data found" error when loading the page. I guess that's normal, since the form shows the data filtered in the tree (in the tree we click on an element and pass its ROWID to the form), and when we load the page no ROWID is selected. So, the first question would be, how can I manage this situation? My first option was to have a condition in the Automatic Fetch for the Form, so that it's executed only when the ROWID item is not null. It worked a couple of times. After a while, it crashed again.
Tired of trying things, we decided to copy this page 30 to another page (page #80). Surprisingly, page #80 worked meanwhile #30 crashed. And they are completely the same, the data has not changed either.
Could it be that page #30 somehow is corrupted? It's really strange that the same exact copy of the page works with one ID but not with another one.
Has someone experienced this situation? it makes me feel like the app is unsecure and unstable. Any ideas, please?
Apex version: 4.1.1 on APEX listener.
Thanks,
Elena.

fac586 wrote:
Elena.mtc wrote:
Thanks for your response. The form is a single row (a form on a table or view). Here is what I've found out thanks to your tips:
It affects to all the three users that I have access with.Try it with a new user that has never accessed the page before.
I used the debug mode (new to me, so I'm kind of slow on this, still) and wrote an exception message on the Automatic Fetch Row and I managed to know the ROWID that the fetch process is using in the where clause. Of course this ROWID does not exist in the table, so the first question that comes to my mind is "how come and from where is the page getting this ROWID?". I don't know and can't comment because I can't see the app. ;-)
If the ROWID is stored in an item, check the Maintain session state property isn't set to Per User.I changed this and seemed to work. But it crashed later. I made a computation process to set to null the rowid's when loading the page. After reset, I deleted the computations (due to application functionality) and it worked. However, I do not trust this page anymore. So we created a new fresh app and copied this page. Luckily we are on development environment :)
>
So, I made a computation to initialize to null the item that saves the ROWID, and now it worked.
This page that I'm testing on is #30, but the valid page is #80 (it has changes made on the look and feel of the page). So, I deleted page #30, and copied page #80 (which works perfectly) into #30. And it crashes again (obvius, since it doesn't have the computation that gives null to the rowid item). What's "interesting" is that I still see the exception message I wrote in the older version of page #30. So, it seems that some values need to be purged and that the delete is not clean, but how? I'm not entirely clear on what you've been doing there, but it does indeed all sound rather odd.
I suspect that you wouldn't be able to reproduce this problem on apex.oracle.com. However, it would probably be helpful if you could upload the app and provide developer credentials to the workspace so we could see how it works and if there's anything obvious (or not) that might cause this problem.Unluckily I cannot do this. Thank you anyway for the help, it's hard to explain when something so weird happens.
Thanks!
Elena.

Error ORA-01403: no data found is not raised using jdbc

Hy there I have a problem receiving exceptions from oracle jdbc driver.
I have the following exception stack if i call insert on a view
using an instead of trigger.
ORA-01403: no data found
ORA-04088: error during execution of trigger
'MYUSER.MY_VIEW_INSERT'
if I do the insert by sql worksheet.
If I do same insert using the following driver
dbDriver = new intersolv.jdbc.sequelink.SequeLinkDriver();
I will receive this exception:
java.sql.SQLException: [INTERSOLV][SequeLink JDBC Driver][ORACLE]ORA-01403: Keine Daten gefunden
Now if I do same thing using oracle driver:
dbDriver = new oracle.jdbc.driver.OracleDriver();
there will no exception be raised!
here is my code:
public class myFrame extends Frame
public static void main( String[] args )
Frame myFrame = new Frame();
DbPflege dbPanel = new DbPflege();
Driver dbDriver = null;
String connectString = null;
try
if( args.length != 0 )
System.out.println( "main: use sequelink!" );
connectString = "jdbc:sequelink://myServer:4003/[Oracle]";
dbDriver = new intersolv.jdbc.sequelink.SequeLinkDriver();
else
System.out.println( "main: use oracle!" );
connectString = "jdbc:oracle:thin:@myServer:1521:idb";
dbDriver = new oracle.jdbc.driver.OracleDriver();
DriverManager.registerDriver( dbDriver );
dbPanel.con = DriverManager.getConnection(connectString, "user", "pwd" );
catch( Exception ex )
System.out.println( "main: ERROR: " + ex );
ex.printStackTrace();
void jBtnExecute_actionPerformed(java.awt.event.ActionEvent event)
Statement stmt = null;
int updateCount = -1;
int colCount = -1;
ResultSet rs = null;
ResultSetMetaData rsMeta = null;
try
stmt = con.createStatement();
stmt.execute( textAreaInput.getText() );
catch( Exception ex )
textAreaOutput.append( ex.toString() );
thanks for your help!!!!

Hi,
You should run you query in sql workshop with the expected values (which are set after user clicks Save or Apply changes button) for P10_CR_BOM_CODE and P10_CR_ID.
Also, please have an exception block in the process to catch any exception and make an appropriate Insert into some user defined error-log table. It would be better to log the P10_CR_BOM_CODE and P10_CR_ID values in case of exception.
These might help you to figure out the cause of exception.
Regards,
Mangal

Error 'ORA-01403 no data found', if a procedure called through $Universe

Hello,
we use at our customer the scheduling software $Universe. The problem follows is happend at calling PL/SQL-procedures within SQL*Plus:
Within the calling procedur another subprogram will be called. This program crashed on select of currval with the error 'ORA-01403 no data found'. This error happens only, if the procedure called through $Universe. If the procedure called directly from SQL*Plus or about a unix shell-script, no error happens.
About the command "select saddr,sid,serial# from sys.V_$SESSION where
username ='xxx';" we select the Session_ID's. These are identically before and after call of the procedure!
Do you have an idea, how the problem can be?
Next information about OS, releases, settings of Oracle-Session-Parameters, and the crashing procedure:
SQL*Plus: Release 8.1.6.0.0 - Production on Fri Mar 15 13:25:05 2002
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
OS: HP-UX11
ORACLE-Server NLS-parameters on HP-UX:
NLS_LANGUAGE               AMERICAN
NLS_TERRITORY               AMERICA
NLS_CURRENCY               $
NLS_ISO_CURRENCY          AMERICA
NLS_NUMERIC_CHARACTERS          .,
NLS_CALENDAR               GREGORIAN
NLS_DATE_FORMAT               DD-MON-RR
NLS_DATE_LANGUAGE          AMERICAN
NLS_CHARACTERSET          WE8DEC
NLS_SORT               BINARY
NLS_TIME_FORMAT               HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT          DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT          HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT          DD-MON-RR HH.MI.SSXFF AM TZH:T
NLS_DUAL_CURRENCY          $
NLS_NCHAR_CHARACTERSET          WE8DEC
NLS_COMP               BINARY
Windows-desktop NLS-parameters:
ALTER SESSION set NLS_LANGUAGE = 'GERMAN';
ALTER SESSION set NLS_TERRITORY = 'GERMANY';
ALTER SESSION set NLS_ISO_CURRENCY = 'GERMANY';
ALTER SESSION set NLS_NUMERIC_CHARACTERS = ',.';
ALTER SESSION set NLS_CALENDAR = 'GREGORIAN';
ALTER SESSION set NLS_DATE_FORMAT = 'DD/MM/YY';
ALTER SESSION set NLS_DATE_LANGUAGE = 'GERMAN';
ALTER SESSION set NLS_SORT = 'GERMAN';
ALTER SESSION set NLS_TIME_FORMAT = 'HH24:MI:SSXFF';
ALTER SESSION set NLS_TIMESTAMP_FORMAT = 'DD.MM.RR HH24:MI:SSXFF';
ALTER SESSION set NLS_TIME_TZ_FORMAT = 'HH24:MI:SSXFF TZH:TZM';
ALTER SESSION set NLS_TIMESTAMP_TZ_FORMAT = 'DD.MM.RR HH24:MI:SSXFF
TZH:TZM';
ALTER SESSION set NLS_DUAL_CURRENCY = '?';
ALTER SESSION set NLS_COMP = 'BINARY';
PROCEDURE PROC_NEW_ID (p_value IN NUMBER,
p_field IN VARCHAR2,
p_table IN VARCHAR2,
p_currval OUT NUMBER)
IS
v_stmt VARCHAR2(200);
v_currval NUMBER;
BEGIN
-- Bildung des SQL-Statements.
v_stmt := 'INSERT INTO '||p_table|| '('|| p_field || ') VALUES
('||p_value||')';
-- Ausfuehren des SQL-Statements.
EXECUTE IMMEDIATE v_stmt;
COMMIT;
-- Bildung des SQL-Statements.
v_stmt := 'SELECT SEQ_'|| p_table || '.CURRVAL FROM DUAL';
-- Ausfuehren des SQL-Statements.
EXECUTE IMMEDIATE v_stmt INTO v_currval;
-- Wertrueckgabe
p_currval := NVL(v_currval,0);
EXCEPTION
WHEN OTHERS THEN
pkg_mira_protokoll.proc_write_error_fwd
(pkg_mira_consts.act_error,
SQLCODE,
SQLERRM(SQLCODE),
'PROC_NEW_ID');
p_currval := 0;
RAISE;
END;
Thanks for your request!
Best regards
Esser Office Consulting KG
J|rgen Esser

This forum is for posting feedback about the OTN site.
The best place for your question is probably a Portal forum.
There is a list of Portal forums here:
http://forums.oracle.com/forums/index.jsp?cat=13

Error processing request ORACLE-01403:no data found

Similar Messages

Maybe you are looking for