Error RCVR_DETERMINATION

Hi,
all iam doing IDOC TO JDBC scenarion.
IDOC is passing from R/3 to XI in SXMB_MONI giving following error. In error ID having the follwoing error message.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards
kumar

Hi,
This error occurs if your Business System used in the reciever is not the same in SLD. See your Adapter Specific properties for the Reciever Business system is correct.
Check this thread this will help you
No Receiver Determination
Errors about 'No receiver could be determined'
Thanks,
Prakash

Similar Messages

Error: RCVR_DETERMINATION:NO_RECEIVER_CASE_ASYNC

Hi Experts,
I'd like to ask for help about that specific error:
RCVR_DETERMINATION:NO_RECEIVER_CASE_ASYNC
We are using Enhanced Receiver Determination for this one, testing the mapping using the test tab results in having a proper receiver identified. But when it comes to runtime, the error above is shown in sxi_monitor.
We are also using an HTTP-RFC destination (Response 200) in our Plain HTTP Adapter. I have also done a full sxi_cache refresh and the changes are already showing in the cache, but still I'm getting the RCVR DETERMINATION error. I also have consulted similar threads here, but that did not help.
Regards,

You are definately missing something
Either you have given a wrong condition or the characters in the condition and the one coming in the message is not right
Check these items:
1. Check the inbound XML if the values coming according to the desired one
2. Check if the condition in the Reciver determination is working fine...
The problem sure is very small you need to trace it.. it would be good if you can paste some of the trace from sxmb_moni with details of the message u hve tested
Rgds
Aditya

Error:RCVR_DETERMINATION" NO_RECEIVER_CASE_BE

hi all,
In my soap-xi-rfc scenario this is the error i am getting in MONI when using .wsdl file from EP
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
but when i am testing the same data from HTTP client it is working fine.
I have deleted the receiver determination and interface determination and created again,but the error continues.
Also in MONI in the message list i can see the sender interface but i am not able to see the receiver system and interface
Can anyone help me out with this??
thanks and regards,
Nisheeta

Hi,
Check the trace in SXMB_MONI, and refresh cache.
Check you configred the determinations correctly or not,
check the receiver interfaces also in IR.
Please compare the entries in IB directory (receiver determination) with entries in Monitoring (SXMB_MONI): Service, Interface, Namespace
also see the below links
RCVR_DETERMINATION">NO_RECEIVER_CASE_BE
Consume a Web Service: No receiver could be determined
Regards
Chilla
reward points if it is helpful..

BPM Error --- RCVR_DETERMINATION NO_RECEIVER_CASE_ASYNC

Hi All,
For my simple BPM scenario -- I am getting RCVR_DETERMINATION NO_RECEIVER_CASE_ASYNC
Point to add -- My BPM has correct Receiver Determination.
1. Because When I activate my ID objects and checked in Environment -- Cache Status Overview
It displays --Integration Server ABAP Cache -- Not Yet Started
2. Also -- In SXI_CACHE in Integration process Node I am not able to see my BPM object
Can u pls let me know how to resolve this cache and BPM problem.
Regards

did you follow the steps mentioned as in this document:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290&overridelayout=true
You seem to have checked the destination in SM59....similarly did you check the services in SICF?
Regards,
Abhishek.

Error is "RCVR_DETERMINATION" NO_RECEIVER_CASE_ASYNC

Hi All,
I am facing error "RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC when sending data from one system to another system.
pls let me know any one how to resolve this issue?
Thanks
Kumar.

Hi Kumar,
There might be configuration issue in the development of the interface.
Please test the Configuration objects in Integration Directory.
Steps to test the configuration.
1. In Integration Directory, Click on Tools.
2. Select Test Configuration.
3. Provide sender and receiver details and payload, then click on Test configuration on the screen.
4. Then click on Run.
This checks whether the configuration done is correct or lets us know if any issue in the configuration.
Thanks,

Error in sender channel:

When activating changes in IR I used to get system message as NoClassDefFoundError.Even then the componenets used to get activated.
Initially every thing was working fine with the sender channel.
It was successfully picking up the file and sending the same to receiver channel.
Suddenly after a day I sarted getting this error (below).And the file was not getting picked up.
Error in channelError: javax.ejb.TransactionRolledbackLocalException: nested exception is: java.lang.RuntimeException: java.lang.NoClassDefFoundError: com/sap/aii/af/app/mp/impl/ModuleProcessorCategories; nested exception is: javax.ejb.EJBTransactionRolledbackException: nested exception is: java.lang.RuntimeException: java.lang.NoClassDefFoundError: com/sap/aii/af/app/mp/impl/ModuleProcessorCategories
sxmb_moni message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
There was no such error: And I had not made any changes since it was working fine.
Is this error because of the message I used to get in IR.?Was might be the cause

Hi,
Please check you message first properly all conditions supporting or not.Is message is having any exceptional chars , and Check whether your are using Async or Synch communication , respectivly the sender and receiver communication mode supporting both sides. and check your J2EE is working fine or not, Check your interface is having the module processors in sender side/receiver side is yes , those are working fine or not , those are properly imported properly or not.
these diffects may not effect the activation of components.
Also check your receiver Business system is working fine or not
And also check your receiver agreement is configured,receiver determination and interface determination all are refered same business systems or not.
,please see the following threads
Error RCVR_DETERMINATION
No Receiver Determination
Re: NO_RECEIVER_CASE_ASYNC
XPATH and RECEIVER DETERMINATION
XI 3.0 No receiver could be determined
Regards
Chilla..

WebService Call: RCVR_DETERMINATION: NO_RECEIVER_CASE_BE

Hello,
I want to call an external Web Service from my ABAP Code, but I get an error in transaction sxmb_moni:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no idea, where this error message comes from... Have you any solution proposals?
Thank you

Hi Yu
for the error RCVR_DETERMINATION.NO_RECEIVER_CASE_BE error
look at these thrad discussed the same
Consume a Web Service: No receiver could be determined
Error in my HTTP > XI > RFC (BAPI) senario
Http to IDOC Error
Regards
Abhishek

Error Checking WSDL

Hi every one.
I´ve publicated an WSDL so a Third Party can cosume it.
I tried to check if the WSDL file is correct by using ALTOVA XMLSPY
( based on this link: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7ccd3e4e-0501-0010-95ae-afa58cb46b75 )
In XMLSPY I see that my file is valid, then I created a New SOAP Request, but when I try to Send it to the Server it returns the following message:
code>RCVR_DETERMINATION.MESSAGE_INCOMPLETE
Can someone give me some light about this??
Thanks in advanced.

Hi karla
refre this Links for your Error RCVR_DETERMINATION.MESSAGE_INCOMPLETE
Re: SOAP sender endpoint problem
SOAP sender endpoint problem
Configuring Sender SOAP Adapter
Regards
Abhishek

Error:- Idoc2 file (Sender KU - Recevier LS)

Hi,
I am using Idoc to file Scenario ( Sender KU - Recevier LS)
I have set up 2 parties:- Sender Party and Recevier Party with Identifier Settings.
1. It is throwing below error :-
RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC
No receiver could be determined
2. Do I need to use one party or both, because recevier is LS.
Please suggest.
Thanks,
Anshul

Udo,
But in earlier thread you only suggest me to use Parties: as I have [Sender KU - Recevier LS]
Idoc2File - Sender R/3 KU (Customer) Configuration
Prateek,
My scenario is Idoc- File ( Customer KU to File LS)
If I create SLD - Business System , so where I will mention Partner no (1100024) and PartnerType (KU)
For example -- Logical system is option there
Because I am using this in Party ---> Identifers settings.
Please syggest.
Anshul

Interface mapping not found at runtime.

Hi all,
For the idoc to idoc scenario i was getting an error
Runtime error
Unable to read the payload from the message object
I have cleared the sld cache and also checked in SXI_CACHE to check the mapping at runtime .I m unable to understand where the problem lies.
Can anyone help?
Regards,
Shrita.

Hi,
Please check you message first properly all conditions supporting or not.Is message is having any exceptional chars , and Check whether your are using Async or Synch communication , respectivly the sender and receiver communication mode supporting both sides. and check your J2EE is working fine or not, Check your interface is having the module processors in sender side/receiver side is yes , those are working fine or not , those are properly imported properly or not.
these diffects may not effect the activation of components.
Also check your receiver Business system is working fine or not
And also check your receiver agreement is configured,receiver determination and interface determination all are refered same business systems or not.
,please see the following threads
Error RCVR_DETERMINATION
No Receiver Determination
Re: NO_RECEIVER_CASE_ASYNC
XPATH and RECEIVER DETERMINATION
XI 3.0 No receiver could be determined
Regards
Chilla..

Configuring Sender SOAP Adapter

Hi, I am trying a simple scenario that worked well in XI 2.0 and I am trying to migrate the same scenario to XI 3.0 where I am having problems.
1. Created two data types: material_in that takes a material; material out that have three simple elements (description, type, and group).
2. Created two message types one for the inbound and other for the outbound
3. Created a message interface linking the outbound and inbound messages type outbound and synchronous.
4. Created all the mappings necessary that maps the material to a RFC-enabled Function module and the output of the function module is mapped to out message.
5. Then created the configuration part (Integration builder - configuration ) using configuration wizard.
6. The communication channel for the sender Business systems is SOAP where the default interface parameters have been provided
7. The communication channel for the receiving business systems is RFC.
The configuration wizard has created all the necessary steps including receiver determination, interface determination, sender and receiver agreement.
I activated all the components. Then using 'Define Web Service', created a WSDL file. I have imported this WSDL file into XMLSPY to test it out.
This is where I am hitting the wall.
When I tried using http://host:javaport/XISOAPAdapter/MessageServlet?channel=
URL, I am getting a http post error (500).
Then, I tried posting to http://host:port/sap/xi/engine?type=entry. This creates an XML message in the XI but comes back with an error 'RCVR_DETERMINATION.MESSAGE_INCOMPLETE'.
Any thoughts from your side is greatly appreciated.
Thanks, Ram Rayavarapu

Hi Ram,
sounds all ok, any more information on the 500?
The http://host:javaport/XISOAPAdapter/MessageServlet?channel=party:service:channel
is the right URL for XI 3.0 not the XI 2.0 one.
I guess you provides a valid user id and password to XMLSPY
when it asked for it and that user has enough rights to do XI work.
Did you try to enter the URL into a web browser? It should ask you for you user and password too and brings up a response of Message Servlet ok. If that does not show up then do you have a proxy on your network which might prevent you from hitting the XI server?
Cheers
Stefan

Consume a Web Service: No receiver could be determined

Hello,
I have a successful running Web Service on a JAVA stack. Now I want to consume this web service within the ABAP Stack. For this purpose I generated the appropriate proxy object from the WSDL.
However, while running my ABAP test program I am receiving an error: RCVR_DETERMINATION.NO_RECEIVER_CASE_BE No receiver could be determined
Does anybody know, what to do? Do I need to register the generated proxy somewhere? Or what went wrong?
Best Regards!

you dont need to do any settings in LPCONFIG
just create client proxy and activate the proxy class
then in LPCONFIG
enter the client proxy name and port name (port name can be any text) and check the checkbox "default" and click create and activate the same.
now you are ready to consume the webservice.
Regards
Raja
assigning points to helpful answers by choosing the appropriate radiobuttons in the answers in the SDN way of saying thanks.

Alerts not getting triggered for invalid receiver receiver

Hello,
My scenario is IDoc to HTTP.I have defined alert rules for my scenario.
I have condition mentioned in receiver determination.Depending on vendor number data is sent to corresponding receiver.
But when i send IDoc is sent with invalid vendor number,it is failing in XI system with error as :No receiver could be determined but not alert is being thrown or triggered.
Same situation is working in Dev and quality but not in production.
I ahve checked the alert rules thorughly in all the 3 environments and they are all perfe

does the error"RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC" gets triggered only when reciever service is not
mentioned in alert rule condition?
This error gets triggered when no receiver matching with the mentioned Condition is found.....the Condition in Receiver Determination OR if no receiver service exists.
I hope you have created a rule in Alert Rule section of RWB and have unchecked the Suppress Multiple Alerts options.
When you get the above error in SXMB_MONI you should get an alert
Regards,
Abhishek.

ABAP Proxy in PI System

HI all,
i have a scenario :
my source system is PI (App.sys)(client 01) from where i am sending the data to my PI (IS)(client 02 ) using ABAP Proxy. And from there i have send the data to my 3rd party Business system using JUDD adapter.
i am able to send the data from my 01 client(AS) to 02 client(IS), but i am not able to send it to my 3rd party system, i can see sucess message in 01 client(AS).
i am getting error RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC
i have checked SLDCHECK it is good.
my Configuration in ID is also good.i have Checked in Test Configuration of my ID.it is showing success.
is there any other Configuration required
pl help me out in finding the Solution..
thanks.
kalyan

Hi
Test configuration not works always.
Check with your ID configurations for receiver determination and check whether system or service defined has the expected ASYNC interface.
If you are using service then you have added the target interface or not?
Thanks
Gaurav

Client Proxy to JDBC synchronous Scenario

I'm using Proxy--PI---JDBC synchronous shcenario, when i execute the proxy from R/3 it is giving me error "RCVR_DETERMINATION.NO_RECEIVER_CASE_BE" in configuration i have used one inbound receiver determination for request, my question is do i need to have one more reciever determination for response.
Thanks for help.

No, you do not have to add additional receiver determination
Usually in sync scenario, make sure you have one receiver determination, no arbitration.
If you have condition for receiver detemination, make sure the condition only return one true.
Liang

Error RCVR_DETERMINATION

Similar Messages

Maybe you are looking for