Error Record with Same Key

Can anyone help me out with a master data load failure.
My request goes off red and the message looks somehow like "Record filtered in advance as error records with the same key exist", "Filter out new records with same key". I have already checked the duplicate handle record setting in DTP. Still why am i getting this error.
Would appreciate if some one could suggest me in this.

Hello Shridevi M ,
When I execute my DTP, I get a master data load failure : "Record filtered in advance as error records with the same key exist" . It's the same as you get. Please tell me how did you solved this probelm?
Thanks in advance,
Abdellatif

Similar Messages

Two records with same key (Infocube)

Hi,
I was trying to do, in a update rule, an "IF" condition with two key figures.
IF Kf1 > Kf2. result = Kf1 else result = Kf2.
But the data in the source (datamart Infocube to infocube) have tow records with the same characteristics combination (the same keys)and different amount in the keyfigures, then the result of my "if" condition is not the expected because I understood in the infocube only exists one characteristics combination. :S
I was seeing those records in the manage transaction of the infocube.
Some reason for this?
Thanks and regards
Victoria Leó

This can happen with parallel loads. Two rows with same set of Char values but in different packets of the same Request, being loaded at the same time.
It really shouldn't be an issue - your update rule will make the KF change as desired. Your queries aggregate KFs based characteristic values, not Dim IDs, so you'll get the totals you expect.
Here's some more info:
There is an RSRV Test that lets you check a dimension for a cube to see if multiple DIM IDs exist for the same combination of Chars - Multiple Entries in Dimensions of a (Basis) InfoCube
Output looks like:
12:02:24 o'clock on 08/25/2006: Start test run for user PIZZAMAN:)
Dimension ZFM_C521: DIMID 61,215 and 61,214 have same characteristic values
Dimension ZFM_C521: DIMID 61,880 and 61,879 have same characteristic values
Dimension ZFM_C521: DIMID 61,366 and 61,365 have same characteristic values
Dimension ZFM_C521: DIMID 61,368 and 61,367 have same characteristic values
12:02:24 on 08/25/2006: Test run for user PIZZAMAN:) completed
You can run the Correct Error option to have it update fact rows to use one of the DimIDs if you want, but unless you have lots of them, I even wouldn't bother.
Here's the description of the test:
Description
This elementary test recognizes whether there are several lines that have different DIMIDs(dimension table key), but have the same SIDs for the selected dimension table for the InfoCube specified. (This can occur by using parallel loading jobs). This has nothing to do with an inconsistency. However, unnecessary storage space is occupied in the database.
Repairs
Since the different DIMIDs with the same SIDs are normally used in the fact tables, they cannot simply be deleted. Therefore, all of the different DIMIDS in the fact tables are replaced by one DIMID that is randomly selected from the equivalent ones. Before a change can be made to the database, the consent of the user is requested.
DIMIDs that have become unnecessary are deleted in the connection. In doing so, not only are the DIMDs deleted that were released in the first part of the repair, but so are all of those that are no longer used in the fact tables (including aggregates). The consent of the user is again requested before this change is made.

Getting Multiple Records with Same Key throws Access Violation

Are there any known issues with PInvoke Signatures for GET .. Im gettign consistently AVL's when attempting to read Multiple Values under single key ..
Error doesn't happens while debugging in VS 2007 , Tried turning off optimizations with no luck ..
Im using VS 2010 and .NET 4.0 ( WIN XP) . I do have a repro. ( Im using latest bits from Oracle site as of 9/10/2010 )
Unhandled Exception: System.AccessViolationException: Attempted to read or write
protected memory. This is often an indication that other memory is corrupt.
at BerkeleyDB.Internal.libdb_csharpPINVOKE.db_strerror(Int32 jarg1)
at BerkeleyDB.DatabaseException..ctor(Int32 err) in C:\Users\gmf\db\db-5.0.26
\csharp\DatabaseException.cs:line 78
at BerkeleyDB.DatabaseException.ThrowException(Int32 err) in C:\Users\gmf\db\
db-5.0.26\csharp\DatabaseException.cs:line 34
at BerkeleyDB.Internal.DB.get(DB_TXN txn, DatabaseEntry key, DatabaseEntry da
ta, UInt32 flags) in C:\Users\gmf\db\db-5.0.26\csharp\Internal\DB.cs:line 187
at BerkeleyDB.BaseDatabase.Get(DatabaseEntry key, DatabaseEntry data, Transac
tion txn, LockingInfo info, UInt32 flags) in C:\Users\gmf\db\db-5.0.26\csharp\Ba
seDatabase.cs:line 900
at BerkeleyDB.Database.GetMultiple(DatabaseEntry key, Int32 BufferSize, Trans
action txn, LockingInfo info) in C:\Users\gmf\db\db-5.0.26\csharp\Database.cs:li
ne 494
at helloworld.Program.Main(String[] args) in C:\bdm\helloworld\helloworld\Pro
gram.cs:line 53
Appreciate any help.
Thanks
Nirmal
Edited by: user8050299 on Sep 10, 2010 3:29 PM
Updated with OS

seems like oracle .NET bindings doesnt work for new CLR . It works fine with .NET 2.0
May be Oracle folks will release new version for 4.0

Record filtered in advance as error records with the same key exist

Dear Masters
I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to Info object through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records(100)
"Record filtered in advance as error records with the same key exist"
Could u please help me to resolve this issue
Thanks in Advance
Raja

Hi
Thanks for reply
I have loaded the Delta data in PSA. In PSA data was loaded successfully. I got the failure only when I loaded the from PSA to Maste data
Thanks in advance
Raja

Duplicate record with same primary key in Fact table

Hi all,
Can the fact table have duplicate record with same primary key . When i checked a cube i could see records with same primary key combination but the key figure values are different. My cube has 6 dimentions (Including Time,Unit and DP) and 2 key figures. So 6 fields combined to form the composite primary key of the fact table. When i checked the records in se16 i could see duplicate records with same primary key. Ther are no parallel loading happening for the cube.
BW system version is 3.1
Data base is : Oracle 10.2
I am not sure how is this possible.
Regards,
PM

Hi Krish,
I checked the datapacket dimention also. Both the record have same dimention id (141). Except the Keyfigure value there is no other change in the Fact table record. I know this is against the basic DBMS primary key rule. But i have records like this in the cube.
Can this situation arise when same records is there in different data packet of same request.
Thx,
PM
null

Unique data record means you can't update a record from ECC with same key.

Unique data record means you can't update a record from ECC with same key fileds right?
Details: For example i have two requests Req1 and Req2 in DSO with unique data record setting checked. on day one Req1 has a filed quantity with value 10 in Active data table. On day two Req1 can not be overwitten from ECC with Req2 with the same key fields but different value 20 in the filed quantity because of the Unique data record settings. finally the delta load fails from ECC going to DSO because of this setting. is it right?
I think we can only use unique record setting going from DSO to cube right?
Please give me a simple scenario in which we can use this setting.
I already search the threads and will assign points only to valuable information.
Thanks in advance.
York

Hi Les,
Unique Data Records:
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Hope it Helps
Srini

Master data records with one key

Hello All,
I have scenario that I need to load the master data records with one key.
For ex--
Cluster            Dcode               version
5000                 DC1                  2008
5000                 DC1                  2008
5001                  DC1                  2009
Could you please let me know possible ways.
Thanks

In your case if Cluster is the key then the underlying attributes data will be overwritten when the same cluster key comes.
as per you example data finally it loads only two records in to the target, since first two records key is same.
Hope this helps.
Veerendra.

New info record with same details as archive one.

Hi Experts,
Due to some issue we want to archieve some standard info record which are created on vendor / material group / plant basis.My query is does system allows to create new info record with same vendor / material group / plant combination after archiving earlier record which is on same basis.
Thnaks & Regards
Vinay

Hi Jurgen,
Thanks for reply.
Our issue is while creating work order(IW31) having external services upon entering info record number in some cases in same client rate is picked up from info record condition but some times from last purchase order based on info update.
We have checked following points.
1.In all the cases work order type is same.
2.Info record are of standard type with same condition.info record are for vendor & material group combination.
3.Checked after changing rate in info record and in purchase order but similar issue exists
4.Compare vendor master also.
5.Their are no contract /sch.agreement for vendors.
Our requirement is to have rate from info record in all the cases in work order.So have two options.
1.Archiving info record-But will need setting in SPRO and also need to create same record again with same combination.Also as their are recent purchase order against those info record not sure whether system will allow or not.Can you please tell what are prerequiste for archiving info record.
or
2.To remove only purchase order number updated in EINE table in those info record where this issue is occuring.We have checked in development system and after removing purchase order number in EINE table it picks up rate from info record.
So thought of checking before removing order ref.from EINE table.
Thanks
Vinay

When we click on the copy botton record with same name should not be saved

Hi,
Copy button will copy the record with the same name and will save it.our requirement is when we click on the copy botton ,record with same name should not be saved
we are performing this task in custom object 12 and exposed Opportunity Name in the layout.
Records with same Opportunity Name should not save ..when we copy the record
Can we perform any field validation on Opportunity Name field?
Please help
please email me @ [email protected]
Thanks
Srinivas Merugu

Opportunities that are assoicated to the same account cannot have the same name. You cannot make this unique for your whole instance. The only way that you could do this would be to create a webservice application that checks this before you save the record.
What about defaulting the name each time this could make the record unique?

Package parametеr "overwrite records with match key" (BPC 10)

Hi all.
We load data from DSO in SAP BW to BPC. We use the /CPMB/LOAD_INFOPROVIDER process chain for that.
In the package we use the "overwrite records with match key" parameter for the "Handling of records in target" setting.
But if there's no data in the DSO, the package hangs in the "Running" status and won't finish loading.
If we start the package with the "append" parameter for the "Handling of records in target" setting, then package finishes with the warning status.
What could be the problem if use "overwrite records with match key" ?
Best regards,
Sergey

Hi,
As per the below note its known issue in SP08. In which version of BPC are you running now.
1787650 - Data Manager package no end at dumpload step for empty data
Thanks,
Raju

How to locate a record with multipute keys in dataprovider??

As above subject, I want to locate a record with multipute keys / searching criterias; my dataprovider is connected to a view of database table.

use:
findFirst(FieldKey[] fieldKeys, java.lang.Object[] values)
for example:
String[] keyf = {"FIELD1", "FIELD2"};
String[] keyval = { keyval1, keyval2};
RowKey rk = xxxDataProvider.findFirst(keyf, keyval);

Error in sharepoint external list while creating record with same id (this id is primary key)

Hi,
I have created one external content type in sharepoint designer to insert/update/delete table data.
This table contains Primary key constraint.
Then I have added this external content type to Sharepoint out of box List.
Insert/Update/Delete is working fine. But when I am trying to insert record with the same id which is already exist in table, page crashed and its giving me following error:
“Violation of PRIMARY KEY constraint 'PK_tbl_Accounts'. Cannot insert duplicate key in object 'dbo.tbl_Accounts'.
The duplicate key value is (1). The statement has been terminated.”
So I want to handle this exception. Can we show any popup message to hide this error?
Thanks & Regards
Rajni

Avoid entering of primary from form if possible.
if not try to customize the new form with infopath and place your custom logic there.
http://lightningtools.com/uncategorized/modifying-external-list-forms-with-infopath-2010/
http://salnikan.wordpress.com/2011/07/26/prevention-of-duplicate-entries-based-on-two-or-more-columns-in-a-sharepoint-list/
Bala

Multiple entries in a Z table with same key fields

Hi
I do have a ZTABLE, with 3 key fields defined earlier. It consists of around 1 lakh records. Later onwards, two of the non keyfields have been made to key fields.
This table is being populated with records at the time of saving a ztransaction.
But some times, the system is updating the same records, some times twice, sometimes thrice, etc. I got to know that all fields (both key fields and non-key fields) of the record are same. That is, records are being updated in to the database table n number of times may be depending of some false logic in the program.
If I tried to enter the same using SM30, it is showing me an error message stating that the record is already existing.
What can be the reson?

Hi,
It seems there is some kind of data inconsistency..try to get all the records and then delete the duplicate entries through program....Now once u r done , from now onwards there won't be any duplicate entiers.,also before updating table use filters to avoid the duplication..
Regards,
Nagaraj

Line with same key

Hello everybody, Im facing a problem when trying to run a query
Im getting an error that says: There is already a line with th same key.
I ran the program ANALYZE_RSZ_TABLES and I found the query that Im trying to run under the error: Selections or RKFs with incomplete defeinition. Im not sure if Im in the right track, or if there is something else that I have to check.
Can somebody help please?

yes I already went there too but found anything important. I did search the oss nothes but nothing worked, I´ll keep trying and see if I can solve it, but if somebody has any idea, please tell me

Showing error records with colors

Hi all,
I have requirement like,
1. need to upload the file into Ztable ,if there is any error in updating into the table
it should display the record with red color in the GRID and with error text in GRID.
How to display the records which are in error with colors and how to get the error text why it is actually not update in table .
Regards,
Madhavi

Madhavi,
1.How are you going to update Ztable based on that you have to get error messages.
2. To get records colored, Just check the sample program.
Check the program and check the comments inside the program. You can come to know what to do to get the rows colored.
REPORT zvenkat_alv_color_row_col.
" Declaration
" To get color for row
" 1.Define color variable with length 3 type char in the final internal
" which is displayed
" 2.build layout structure type slis_layout_alv by specifying
" info_fieldname = 'COLOR' and pass layout structure thru FM REUSE*ALV*
" 3.Poplate Final internal with color values for the field COLOR.
"types
TYPES:
 BEGIN OF t_pa0001,
 color(3) TYPE c, "1.Declare this
 pernr TYPE pa0001-pernr,
 ename TYPE pa0001-ename,
 END OF t_pa0001.
"Work area
DATA:
 w_pa0001 TYPE t_pa0001.
"Internal tables
DATA:
 i_pa0001 TYPE STANDARD TABLE OF t_pa0001.
* ALV Declarations
* Types Pools
TYPE-POOLS:
 slis.
* Types
TYPES:
 t_fieldcat TYPE slis_fieldcat_alv,
 t_events TYPE slis_alv_event,
 t_layout TYPE slis_layout_alv.
* Workareas
DATA:
 w_fieldcat TYPE t_fieldcat,
 w_events TYPE t_events,
 w_layout TYPE t_layout.
* Internal Tables
DATA:
 i_fieldcat TYPE STANDARD TABLE OF t_fieldcat,
 i_events TYPE STANDARD TABLE OF t_events.
*&START-OF-SELECTION
START-OF-SELECTION .
PERFORM get_data.
PERFORM color_the_row. "Populate Color like this based on ur conditions
*&END-OF-SELECTION
END-OF-SELECTION.
PERFORM fieldcat.
PERFORM layout_build.
PERFORM dispaly .
" Form fieldcat
"emphasize ===== Set this to highlight column in color
" Value range: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off '1'=on)
" 'X' = The column is highlighted in the default color for color highlighting.
" 'Cxyz' = The column is highlighted in the coded color:
" C: Color (coding must start with C)
" x: Color number
" y: Intensified
" z: Inverse
FORM fieldcat .
CLEAR :
w_fieldcat,i_fieldcat[].
w_fieldcat-fieldname = 'PERNR'.
w_fieldcat-tabname = 'I_PA0001'.
w_fieldcat-emphasize = 'C71'.
w_fieldcat-seltext_m = 'Employee No'.
w_fieldcat-no_zero = 'PERNR'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-fieldname = 'ENAME'.
w_fieldcat-tabname = 'I_PA0001'.
w_fieldcat-seltext_m = 'ENAME'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " fieldcat
*& Form dispaly
FORM dispaly .
DATA :l_program TYPE sy-repid.
l_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = l_program
* i_callback_top_of_page = 'TOP_OF_PAGE'
 i_callback_html_top_of_page = 'TOP_OF_PAGE'
* IT_EXCLUDING = i_extab
 is_layout = w_layout
 it_events = i_events
 it_fieldcat = i_fieldcat
 TABLES
 t_outtab = i_pa0001.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " dispaly
*& Form get_data
FORM get_data .
DO 20 TIMES.
 SELECT pernr ename
 FROM pa0001
 APPENDING CORRESPONDING FIELDS OF TABLE i_pa0001
 UP TO 10 ROWS.
ENDDO.
ENDFORM. " get_data
*& Form layout_build
FORM layout_build .
w_layout-info_fieldname = 'COLOR'. "Pass COLOR field name like this.
ENDFORM. " layout_build
*& Form color_the_row
FORM color_the_row .
LOOP AT i_pa0001 INTO w_pa0001.
 IF sy-tabix > 3.
 w_pa0001-color = 'C31'.
 MODIFY i_pa0001 FROM w_pa0001 INDEX sy-tabix.
 ENDIF.
ENDLOOP.
ENDFORM. " color_the_row
*& Form top_of_page
FORM top_of_page USING document TYPE REF TO cl_dd_document.
DATA:
 l_text TYPE sdydo_text_element.
l_text = 'xyz'.
CALL METHOD document->add_text
 EXPORTING
 text = l_text
 sap_emphasis = cl_dd_document=>strong
 sap_style = cl_dd_document=>key.
CALL METHOD document->new_line.
l_text = 'lmn'.
CALL METHOD document->add_text
 EXPORTING
 text = l_text
 sap_fontsize = cl_dd_document=>medium
 sap_color = cl_dd_document=>list_positive
 sap_style = cl_dd_document=>key.
CALL METHOD document->underline.
ENDFORM. "top_of_page
I hope that it helps u .
Regards,
Venkat.O

Error Record with Same Key

Similar Messages

Maybe you are looking for