How can I refer to a value of the textfield1 into the textfield2 and set readonly textfield2, and join the value of various textfields in just one textfield multiline ?

I am new in acroforms.
I have a form with 5 pages, in the first page the user fill personal information, the fields are (names, addres, birtdate, ocupation,etc ) all are texboxes, I need to get the same value of every textboxes of the first page into the 2d and 3, 4 and 5 pages, I have created another textboxes in the 2, 3 .. pages with the same names in order to duplicate the value of each one, but if I make some of them readonly, every textboxes in every page are readonly...
For that reaseon, I tried changin the name of the texboxes of the 2, 3, 4 and 5 pages to names1, names2, names3, names4, and so on for the other fields, I have written some scripts, but no lucky, because I used this line in every new textbox, as the following (for the textbox names1)
this.getField("names").Value
Without results, the textboxes apears in blank
And also, in the last page I need to join some texboxes values in only one multiline textbox
Please any advice will be welcome..
Muchas gracias
Rafsys

For the information in the second text box to be the same as the first text box (i.e. - on later pages), simply give the fields the same name. The second on could be set to readonly and you could even remove the borders and such so it looked like it was just part of the page. This last trick would get around the need to combine the fields for the display as you mention. Combining the fields would have to be done with JavaScript.

Similar Messages

How can I refer to attributes calculated of the view's entity in the doDML?

I want to modify the procedure doDML of an entity for the insertion of the records, but for it I need attributes of calculated type incorporated in the correspondent view of the entity. Since I refer to them?

User,
Perhaps you should put the calculated attribute on the Entity Object, and change the VO to refer to the calculated object from the EO. Since the EO->VO relationship is "many to many," there isn't a method on the EO to refer to "the" VO, since there are potentially many of them.
John

How can i refer to the parent window of the window containing an applet ?

Hi all,
I m stuck up with something. I have a web page say 'page1' which has a link that opens up a popup window. This popup say 'page2' window has an applet. On clicking particular pins on the applet i need to
direct page1 to another URL & close the popup window. i hv tried this code.
URL url = new URL(applet.getCodeBase(), path);
AppletContext appletcontext = applet.getAppletContext();
appletcontext.showDocument(url, "content");
JSObject win = JSObject.getWindow(applet);
win.eval("alert(\"Do u wnat to close!\");");
win.eval("window.close()");
This code opens up another window on click of the pin, & shows an alert before closing the popup window. On using
appletcontext.showDocument(url, "_parent"); or
appletcontext.showDocument(url, "_top");
The window containing applet gets refreshed with the URL but not page1.
How can i refer so to page1 from the applet.

You don't show your code for what parent or top are, but in an
applet, you must stick with relative links. Once you have the
appletcontext, use a relative path from there:
In the snippet below, docName is a relative path, i.e. ../up/above
   * Displays the specified document in the Web browser.
   * @param docName String pathname of document to download from Webserver
   * @return void
private void fetchDocument(String docName) {
     AppletContext ctx = getAppletContext();
     java.net.URL serverURL = getDocumentBase();
     java.net.URL codeURL   = getCodeBase();
     java.net.URL docURL = null;
     try {
        docURL = new java.net.URL(codeURL, docName);
     catch (java.net.MalformedURLException err) {
        System.out.println("unable to compute URL from (" + serverURL + ", " +
                           docName + ")");
     if(this.bDebug)
       System.out.println("Open document: " + docURL.toString());
     ctx.showDocument(docURL);
}

How can I add a black border at the bottom of a photo?

How can I add a black border at the bottom of a photo?

Just curious: Why whould you want to add navigation Rules at run time. I believe the navigation rules should be set to begin with - "by s/w Architect Design".
Else you can always use Redirect / Forward.

IF_IXML : How can i add encoding with value UTF-8 to the document object??

Hi
i want to create a xml file with the following content:
<?xml version="1.0" encoding="UTF-8"?>
<OpenSearchDescription xmlns="http://....">
</OpenSearchDescription>
i did this with the if_ixml interface and rendered the content in a file 'D:\usr\sap\IFD\DVEBMGS01\log\TEST_out.xml
<?xml version="1.0"?>
<OpenSearchDescription xmlns="http://....">
</OpenSearchDescription>
BUT the document attribut(?) encoding="UTF-8"?> is missing!
How can i add encoding with value UTF-8 to the document object?? it should look like:
<?xml version="1.0" encoding="UTF-8"?>
*here is my coding.
TYPE-POOLS: ixml.
CLASS cl_ixml DEFINITION LOAD.
DATA: lo_ixml TYPE REF TO if_ixml,
 lo_streamfactory TYPE REF TO if_ixml_stream_factory,
 lo_document TYPE REF TO if_ixml_document,
 lo_parent TYPE REF TO if_ixml_element,
 lo_ostream TYPE REF TO if_ixml_ostream,
 lo_renderer TYPE REF TO if_ixml_renderer,
 lv_rc TYPE i.
lo_ixml = cl_ixml=>create( ).
lo_streamfactory = lo_ixml->create_stream_factory( ).
lo_document = lo_ixml->create_document( ).
lo_parent = lo_document->create_simple_element( name = 'OpenSearchDescription' "root node
 parent = lo_document ).
lo_parent->set_attribute_ns( name = 'xmlns'
 value = 'http://....' ).
*rausrendern in file
lo_ostream = lo_streamfactory->create_ostream_uri( system_id = 'D:\usr\sap\IFD\DVEBMGS01\log\TEST_out.xml' ).
lo_renderer = lo_ixml->create_renderer( ostream = lo_ostream
 document = lo_document ).
lv_rc = lo_renderer->render( ).
Thanks for help
Britta

Use the following code:
set an document encoding
l_encoding = l_ixml->create_encoding( character_set = 'UTF-8'
 byte_order = if_ixml_encoding=>co_none ).
l_success = l_ostream->set_encoding( encoding = l_encoding ).
create a xml renderer
l_renderer = l_ixml->create_renderer( document = l_doc ostream = l_ostream ).

How can I refer an xml Schema that was registred in Oracle xml DB

How can I refer an xml Schema that was registred in Oracle xml DB, from other xml schema?
I have the follow schema,:
<?xml version="1.0" encoding="AL32UTF8"?>
<xsd:schema targetNamespace="schemastipostasa.xsd"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb/XDBSchema.xsd"
elementFormDefault="unqualified" version="1.0"
attributeFormDefault="unqualified">
<xsd:simpleType name="codigosType" xdb:SQLType="NUMBER(4)">
<xsd:restriction base="xsd:positiveInteger" >
<xsd:totalDigits value="4" />
</xsd:restriction>
</xsd:simpleType >
<xsd:simpleType name="integerUnoType" xdb:SQLType="NUMBER(1)">
<xsd:restriction base="xsd:int" >
<xsd:totalDigits value="1" />
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="condicionType" xdb:SQLType="VARCHAR2(1)">
<xsd:restriction base="xsd:string">
<xsd:enumeration value="S" >
<xsd:annotation>
<xsd:documentation>Condicion si es S</xsd:documentation>
</xsd:annotation>
</xsd:enumeration>
<xsd:enumeration value="N" >
<xsd:annotation>
<xsd:documentation>Condicion no es N</xsd:documentation>
</xsd:annotation>
</xsd:enumeration>
</xsd:restriction>
</xsd:simpleType >
</xsd:schema>
I registred the schema written above with the folowwing pl*sql :
DECLARE
direc varchar2(2000);
nombreArch BFILE;
mens varchar2(2000);
BEGIN
direc:=uso_comun.pack_mail.fun_valor_param('TASA','DIR_DBSERVER');
nombreArch:=bfilename(direc,'schemas_tipos_tasa.xsd');
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'http://xmlns.oracle.com/tasa/schemas.tipos.tasa.xsd',
SCHEMADOC => nombreArch,
LOCAL => TRUE,
CSID => nls_charset_id('AL32UTF8'));
dbms_lob.CLOSE(nombreArch);
dbms_output.put_line('salio sin cancelar');
exception
when others then
mens:=sqlerrm;
dbms_lob.CLOSE(nombreArch);
rollback;
raise_application_error (-20001,'en registro shcema='||mens);
END;
Then, I want to register the following schema, that mention de schema above:
<?xml version="1.0" encoding="AL32UTF8"?>
<xsd:schema targetNamespace="schema.repuesto.xsd"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb/XDBSchema.xsd"
xmlns:tns="http://xmlns.oracle.com/tasa/schemas.tipos.tasa.xsd"
elementFormDefault="qualified" version="1.0"
attributeFormDefault="unqualified" >
<xsd:element name="PRECIORENG" type="preciorepType" />
<xsd:complexType name="preciorepType" >
<xsd:sequence minOccurs="1" maxOccurs="unbounded">
<xsd:element name="CODIGO_MARCA" type="tns:codigosType" />
<xsd:element name="ORIGEN_PRECIO" type="tns:integerUnoType" />
<xsd:element name="INGRESO_POR_FALTANTE" type="tns:condicionType" />
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
But when a run the following script whith the same db-user:
DECLARE
direc varchar2(2000);
nombreArch BFILE;
mens varchar2(2000);
BEGIN
direc:=uso_comun.pack_mail.fun_valor_param('TASA','DIR_DBSERVER');
-- nombreArch:=bfilename(direc,'prueba_schema_seis.xsd');
nombreArch:=bfilename(direc,'Schema_repuesto_nuevo.xsd');
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL =>'http://xmlns.oracle.com/tasa/schema.repuesto.xsd',
SCHEMADOC => nombreArch,
LOCAL => TRUE,
CSID => nls_charset_id('AL32UTF8'));
dbms_lob.CLOSE(nombreArch);
dbms_output.put_line('salio sin cancelar');
--commit;
exception
when others then
mens:=sqlerrm;
dbms_lob.CLOSE(nombreArch);
rollback;
raise_application_error (-20001,'en registro shcema='||mens);
END;
tell me the error: ORA: 01031, insufficient privileges!!!!, what’s wrong??,

Hi,
To register schema, you require XDBADMIN system privilege granted to the user.
Please verify this and retry.
Rgds,
Rakesh Tripathi

How can i read user input value to my User exist

Hi Guru's,
I am facing one problem in Variables in BPS.
I am calculating days from Month/year .I have one variable it is for Days,Second variable it is for Month/Year.
First variable is user exist (for calculating the days),Second varible is user defined variable(this is a Input to the first variable).
When i am giving the Month/Year(02/2008)variable i am getting the 29 days from the first variable.again i am changing the value of Month/Yera(03/2008) i am not getting the desired value.
my doubt is my user exist not able to read current value of variable(month/year).how can i pass my value to user exist because this value is user input value based on this value i am calculating the days and dynamically displaying the layout.
Here is the my sample code..
seq = '0000'.
ind = 0.
 i_area = 'ZTEST1'.
 area_var = 'ZVar2'.
PERFORM instantiate_object USING i_area
 area_var
 CHANGING lsr_var.
PERFORM get_current_value_of_variable
 USING lsr_var
 CHANGING lto_value.
READ TABLE lto_value INTO lso_value index 1 .
i_month = lso_value-low.
iv_month = i_month+4(2).
iv_year = i_month(4).
concatenate iv_year iv_month '01' into iv_date.
begindate = iv_date.
below bracket code calculating the leap year
( IF iv_date+4(2) = lc_feb.
 lv_hlp_date_year = iv_date+0(4).
 lv_hlp_rest = lv_hlp_date_year MOD 4.
 IF lv_hlp_rest = 0.
 EV_DAYS = lc_days_29.
 lv_hlp_rest = lv_hlp_date_year MOD 100.
 IF lv_hlp_rest = 0.
 lv_hlp_rest = lv_hlp_date_year MOD 400.
 IF lv_hlp_rest NE 0.
 EV_DAYS = lc_days_28.
 ENDIF.
 ENDIF.
 ELSE.
 EV_DAYS = lc_days_28.
 ENDIF.)
ELSE.
below bracket code calculating the days
( CASE iv_date+4(2).
 WHEN lc_jan. EV_DAYS = lc_days_31.
 WHEN lc_mar. EV_DAYS = lc_days_31.
 WHEN lc_may. EV_DAYS = lc_days_31.
 WHEN lc_jul. EV_DAYS = lc_days_31.
 WHEN lc_aug. EV_DAYS = lc_days_31.
 WHEN lc_oct. EV_DAYS = lc_days_31.
 WHEN lc_dec. EV_DAYS = lc_days_31.
 WHEN lc_apr. EV_DAYS = lc_days_30.
 WHEN lc_jun. EV_DAYS = lc_days_30.
 WHEN lc_sep. EV_DAYS = lc_days_30.
 WHEN lc_nov. EV_DAYS = lc_days_30.
 WHEN OTHERS. CLEAR EV_DAYS.
 ENDCASE.)
ENDIF.
data: st_date(2) type c.
st_date = '01'.
ind = 0.
ind = ind + 1.
here i am passing the low value and high value.
yto_charsel-chanm = '0CALDAY'.
yto_charsel-seqno = 1.
yto_charsel-sign = 'I'.
yto_charsel-opt = 'EQ'.
yto_charsel-LOW = st_date.
yto_charsel-chanm = '0CALDAY'.
yto_charsel-seqno = 1.
yto_charsel-sign = 'I'.
yto_charsel-opt = 'BT'.
yto_charsel-high = ev_days.
INSERT yto_charsel INTO sto_charsel INDEX ind.
ETO_CHARSEL = sto_charsel.
lto_value = sto_charsel.
How can i pass user input value to read this exist ,some where again i have to write code or else??
This is very urgent can you help me..

Hi,
Instead of two perform statements, use single perform.
PERFORM get_value USING i_area
 i_variable
 CHANGING lw_varsel.
Take the values from lw_varsel-low.
FORM statement for this perform is as follows.
DATA: li_varsel TYPE STANDARD TABLE OF upc_ys_api_varsel,
 lv_varsel TYPE REF TO cl_sem_variable.
FORM get_value USING p_area TYPE upc_y_area
 p_variable TYPE upc_y_variable
 CHANGING
 p_lw_varsel TYPE upc_ys_api_varsel.
 CALL METHOD cl_sem_variable=>get_instance
 EXPORTING
 i_area = p_area
 i_variable = p_variable
 I_CREATE =
 RECEIVING
 rr_variable = lv_varsel.
 EXCEPTIONS
 NOT_EXISTING = 1
 others = 2
 IF sy-subrc <> 0.
 EXIT.
 ENDIF.
 REFRESH li_varsel.
****Getting the Value*********
 CALL METHOD lv_varsel->get_value
 EXPORTING
 i_user = sy-uname
 i_restrict = 'X'
 RECEIVING
 rto_value = li_varsel.
 CLEAR : p_lw_varsel.
 READ TABLE li_varsel INTO p_lw_varsel INDEX 1.
 IF sy-subrc <> 0.
 EXIT.
 ENDIF.
ENDFORM. "get_value
Try this code.
Bindu

How can i get all these values in single row with comma separated?

I have a table "abxx" with column "absg" Number(3)
which is having following rows
absg
1
3
56
232
43
436
23
677
545
367
xxxxxx No of rows
How can i get all these values in single row with comma separated?
Like
output_absg
1,3,56,232,43,436,23,677,545,367,..,..,...............
Can you send the query Plz!

These all will do the same
create or replace type string_agg_type as object
2 (
3 total varchar2(4000),
4
5 static function
6 ODCIAggregateInitialize(sctx IN OUT string_agg_type )
7 return number,
8
9 member function
10 ODCIAggregateIterate(self IN OUT string_agg_type ,
11 value IN varchar2 )
12 return number,
13
14 member function
15 ODCIAggregateTerminate(self IN string_agg_type,
16 returnValue OUT varchar2,
17 flags IN number)
18 return number,
19
20 member function
21 ODCIAggregateMerge(self IN OUT string_agg_type,
22 ctx2 IN string_agg_type)
23 return number
24 );
25 /
create or replace type body string_agg_type
2 is
3
4 static function ODCIAggregateInitialize(sctx IN OUT string_agg_type)
5 return number
6 is
7 begin
8 sctx := string_agg_type( null );
9 return ODCIConst.Success;
10 end;
11
12 member function ODCIAggregateIterate(self IN OUT string_agg_type,
13 value IN varchar2 )
14 return number
15 is
16 begin
17 self.total := self.total || ',' || value;
18 return ODCIConst.Success;
19 end;
20
21 member function ODCIAggregateTerminate(self IN string_agg_type,
22 returnValue OUT varchar2,
23 flags IN number)
24 return number
25 is
26 begin
27 returnValue := ltrim(self.total,',');
28 return ODCIConst.Success;
29 end;
30
31 member function ODCIAggregateMerge(self IN OUT string_agg_type,
32 ctx2 IN string_agg_type)
33 return number
34 is
35 begin
36 self.total := self.total || ctx2.total;
37 return ODCIConst.Success;
38 end;
39
40
41 end;
42 /
Type body created.
[email protected]>
[email protected]> CREATE or replace
2 FUNCTION stragg(input varchar2 )
3 RETURN varchar2
4 PARALLEL_ENABLE AGGREGATE USING string_agg_type;
5 /
CREATE OR REPLACE FUNCTION get_employees (p_deptno in emp.deptno%TYPE)
RETURN VARCHAR2
IS
l_text VARCHAR2(32767) := NULL;
BEGIN
FOR cur_rec IN (SELECT ename FROM emp WHERE deptno = p_deptno) LOOP
l_text := l_text || ',' || cur_rec.ename;
END LOOP;
RETURN LTRIM(l_text, ',');
END;
SHOW ERRORS
The function can then be incorporated into a query as follows.
COLUMN employees FORMAT A50
SELECT deptno,
get_employees(deptno) AS employees
FROM emp
GROUP by deptno;
###########################################3
SELECT SUBSTR(STR,2) FROM
(SELECT SYS_CONNECT_BY_PATH(n,',')
STR ,LENGTH(SYS_CONNECT_BY_PATH(n,',')) LN
FROM
SELECT N,rownum rn from t )
CONNECT BY rn = PRIOR RN+1
ORDER BY LN desc )
WHERE ROWNUM=1
declare
str varchar2(32767);
begin
for i in (select sal from emp) loop
str:= str || i.sal ||',' ;
end loop;
dbms_output.put_line(str);
end;
COLUMN employees FORMAT A50
SELECT e.deptno,
get_employees(e.deptno) AS employees
FROM (SELECT DISTINCT deptno
FROM emp) e;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE FUNCTION concatenate_list (p_cursor IN SYS_REFCURSOR)
RETURN VARCHAR2
IS
l_return VARCHAR2(32767);
l_temp VARCHAR2(32767);
BEGIN
LOOP
FETCH p_cursor
INTO l_temp;
EXIT WHEN p_cursor%NOTFOUND;
l_return := l_return || ',' || l_temp;
END LOOP;
RETURN LTRIM(l_return, ',');
END;
COLUMN employees FORMAT A50
SELECT e1.deptno,
concatenate_list(CURSOR(SELECT e2.ename FROM emp e2 WHERE e2.deptno = e1.deptno)) employees
FROM emp e1
GROUP BY e1.deptno;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE TYPE t_string_agg AS OBJECT
g_string VARCHAR2(32767),
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER
SHOW ERRORS
CREATE OR REPLACE TYPE BODY t_string_agg IS
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER IS
BEGIN
sctx := t_string_agg(NULL);
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER IS
BEGIN
SELF.g_string := self.g_string || ',' || value;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER IS
BEGIN
returnValue := RTRIM(LTRIM(SELF.g_string, ','), ',');
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER IS
BEGIN
SELF.g_string := SELF.g_string || ',' || ctx2.g_string;
RETURN ODCIConst.Success;
END;
END;
SHOW ERRORS
CREATE OR REPLACE FUNCTION string_agg (p_input VARCHAR2)
RETURN VARCHAR2
PARALLEL_ENABLE AGGREGATE USING t_string_agg;
/

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
 retfield = 'FLD2'
 value_org = 'S'
 tables
 value_tab = It_VALTAB
 return_tab = It_return
 dynpfld_mapping = It_dynpfld
 exceptions
 parameter_error = 1
 no_values_found = 2
 others = 3.
 if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 else.
 perform get_selected_fields tables It_return.
 endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
 la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
 la_fields-fieldname = <fs_return>-retfield.
 la_fields-fieldvalue = <fs_return>-fieldval.
 append la_fields to lt_fields.
 clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
 exporting
 dyname = sy-repid
 dynumb = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
 tables
 dynpfields = lt_fields
 exceptions
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 others = 8.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

HOW CAN I PASS A DEFAULT VALUE IN INTERNAL TABLE

HOW CAN I PASS A DEFAULT VALUE IN INTERNAL TABLE.
DATA : BEGIN OF ITAB OCCURS 0,
           FIELD1(2) TYPC C DEFAULT   '12',
           FIELD2     TYPE C ,
           END OF ITAB1.
IT'S GIVING ERROR MESSAGE.
PLZ LOOK INTO THIS AND GIVE ME CORRECT SOLUTION.
THANKS
SURI

DATA : BEGIN OF ITAB OCCURS 0,
FIELD1(2) TYPC C,
FIELD2 TYPE C ,
END OF ITAB1.
itab-field1 = '12'.
itab-field2 = 'A'.
append itab.
clear itab-field2.
itab-field1 = '12'.
itab-field2 = 'B'.
append itab.
clear itab-field2.
Now everytime u'll have the value for field1 = '12'.
Regards
Vasu

How can I show a 0% range in the data value label on a bar chart thanks?

How can I show a 0% range in the data value label on a bar chart thanks?

I'm not sure what the question is.
I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%. The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %. This will get you a thin line on the chart.
But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label.

How can i transfer a field value in the main report to its sub-report?

How can i transfer a field value in the main report to its sub-report?Please eloberate with example if possible!Thanks... 

You can do a couple of things - one would be to pass the information using the data linking expert. Right click on the subreport, choose 'Change Subreport Links' and select the field(s) you are wanting to pass to the subreport. CRW will build parameters and a record selection formula for you in the subreport, and if that's what you want, then great. But you can also remove the selection formula from the subreport and work with the parameter fields in the subreport however you would like.Alternatively, you can look to passing Shared variables back and forth from the main and subreport. this link talks about the method to do this: http://diamond.businessobjects.com/node/251

Using action script 2 how can i send a variable value to a dynamic textbox on a different keyframe?

using action script 2 how can i send a variable value to a dynamic textbox on a different keyframe?

Thanks for your swift response.
That sounds like a good solution, but the code I have on frame 2 is this
timer = 0;
countup = function(){
timer++;
countupInterval = setInterval(countup,100);
If I added the same actionscript to frame 3 which has a dynamic textbox with a variable timer attached wouldn't it just put the timer back to 0? What I want is the last known value that was given when it was in frame 2.
I am thinking of temple run here, I am trying to caculate the total distance(set in the timer variable) from the previous try.
Hope this makes sense.
Chazwick

How can I add a blank value in a standard drop down list

Hello,
I have a requirement to add a blank value into the standard drop down list of for i.e. the search criteria
"created on" -> (values are: yesterday/today/last week etc).
The problem is, that this field has always the default value "yesterday" but our customer wants to have a blank field as default.
Can anybody provide me steps how can I add this blank value ?
Many thanks in advance

Hi Bernard,
thanks for your reply.
Its for quotation.
Could you give me still some further detail steps, please ?
Many thanks
Andreas

How can I refer to the PhotoShop Object library dynamically depend on the release of PhotoShop?

Recently, I make a program, now I face a big program:
I make the program by visual basic and photoshop script , but my client have different release of Photoshop, for example : photoshop 7.0 cs and cs2. I know every release of PhotoShop have ist own Object library, but in visual basic 6.0, I can only refer to one PhotoShop Object library. for example: if I refer to Photoshop 8.0 Object library, if my clients release of Photoshop is 7.0. there will be a error message : Run-time error '429 ( cant create object) Run-time error '430(Class does not support Automation or does not support expected interface), How can I refer to the PhotoShop Object library dynamically depend on the release of PhotoShop?
my email is : [email protected] .
any suggestion?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads

How can I refer to a value of the textfield1 into the textfield2 and set readonly textfield2, and join the value of various textfields in just one textfield multiline ?

Similar Messages

Maybe you are looking for